Error [#267] process of job creation 5853305

Similar Questions

• Device photosmart c6380 maintains processing a job. Cannot delete it. Enabled, unplug and authorized in Quebec

  Original title: photosmart c6380

  Device photosmart c6380 maintains processing a job. Cannot delete it.  Enabled, unplug and allowed to help Québec

  Hello

  1. have you made changes on the computer before this problem?

  2. which version of the Windows operating system is installed on your computer?

  I suggest you uninstall and reinstall the driver printer HP Photosmart c6380 and so software and check if it helps.

  Uninstall a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

  Install a program: http://windows.microsoft.com/en-US/windows7/Install-a-program

  Driver & Software Downloads - HP Photosmart C6380 all-in-One Printer: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=3560280

  It will be useful.

• When you print it out paper HP PSC 1507 just repeat the error in the print job

  Hi im on MAx OS X 10.6.4 and I got it all in one HP PSC 1507 printer... I don't know why but I have intralled all the drivers n etc. but it keeps just coming with error in the print job just stay

  Any help would be appreciated

  Thanks George

  Good question.  Although it is listed as being supported under Snow Leopard, there is not another print and scan all drivers.

  We will restore the print system and just use the built-in support for your printer:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• "If there was an error in processing the order." Who knows what I can do?

  I can't buy a subscription. Buy Creative Cloud for photographers. After pressing a proof of purchase to a page where it says, "If there was an error in processing the order." Who knows what I can do?

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• Error in processing my order... desperately need help... AS SOON AS POSSIBLE.

  I don't know why...

  I tried to buy the student-teacher participation plan twice... and for some reason, it keeps showing me that there is a mistake in processing my order?

  I checked my billing information and everything... but it always seems that display the same message that I have error in processing my order...

  Wise words?

  Help is very appreciated!

  Try to clear the cookies/cache and place the order.

• Photoshop Elements 11, Windows 7 PC. When you try to make a Photo montage I get an error "not available for the creation of valid size.

  Hello

  Need help...  When you try to make a Photo montage I get an error "not available for the creation of valid size.

  Photoshop Elements 11, Windows 7 PC.

  Thank you

  Error "not available for the creation of valid size.

• Error handling process

  Hello
  
  I started using a process to manage the final DB in our APEX applications transactions as I used to use a validation and a process with the null value; because error of process management is not very friendly to provide error messages.
  
  I have little of which here is a code snippet
  

  declare
  
    ex_error         EXCEPTION;
    v_Value          NUMBER := 0;
  
  begin
    for i in 1..APEX_APPLICATION.G_F01.COUNT loop
      v_Value := APEX_APPLICATION.G_F01(i); --Radio group
    end loop;
  
    IF v_Value = 0 OR v_Value = '' OR v_Value is null THEN
      :P10_MESSAGE := 'You must select an item';
      raise ex_error;
    END IF;
  
    :P10_MESSAGE := 'Process worked ok';
  
  end;

  IM wondering the correct way to handle errors in a display of a dynamic error message depending on where the code ends. I tried to assign an error message I'll on a hidden item P10_MESSAGE and then use it in the message of success and failure as & P10_MESSAGE. but the value assigned to the hidden element does not show, as if it has been lost due to the exception raised, if the code works however the hidden element displays the process worked ok
  
  Request Express 4.1.0.00.32
  
  
  Concerning
  
  Graham

  Graham

  Since you are in 4.1, why not use the [url http://docs.oracle.com/cd/E23903_01/doc/doc.41api /e21676/apex_error.htm#BGBEEGIB]apex_error

  You can not only set your own level of demand and the error handling page.
  But ADD_ERROR procedures give you the possibility of an increase in errors customized with personalized messages.

  Nicolette

• Strange timing errors, python process taking CPU

  I have 5 Server freshly moved on top of Yosemite.

  I migrated Server 3 to 4 and now 5.  My sites all done.  My e-mail service is very good.

  I've never used the calendar service, and used to spam my system with Dingo errors log in Server 4.   I thought it would be fine in the Server 5 because 5 fixed issues for many in the nets here.

  Not for me.  So I tried to turn it on.   I get this error in the calendar error log:

  2016-02-14 22:45:25-0600 [---] (port UNIX ' / var/run/caldavd/caldavd.sock' closed)

  2016-02-14 22:46:20-0600 [---] open journal.

  2016-02-14 22:46:20-0600 [---] ControlSocket go from ' / var/run/caldavd/caldavd.sock'

  2016-02-14 22:46:22-0600 [-] [txdav.base.datastore.subpostgres #error] unable to connect to database schema creation: Broken pipe [Errno [32]

  2016-02-14 22:46:23-0600 [-] [txdav.base.datastore.subpostgres #critical] cannot start or connect to the postgres: md5 password authentication failed

  2016-02-14 22:46:23-0600 [---] (port UNIX ' / var/run/caldavd/caldavd.sock' closed)

  Is it possible that I can delete calendar and let app Server make it fresh?  I will lose no data because I've never used.

  During this time, my server otherwise happy is stuck using 9% CPU for several treatments Python and postgres continue taking up 100% CPU when I look up there.   How can I go back factory calendar?

  The caldavd_setup.log is trivial and seems that everything worked until the end.

  14 February 19:53:50 [CalendarServerCommonSetup] successful Serveradmin

  14 February 19:53:50 [CalendarServerCommonSetup] call fix-permissions

  14 February 19:53:50 [CalendarServerCommonSetup] calling calendarserver_upgrade - postprocess

  14 February 19:54:01 [CalendarServerCommonSetup] out of calendarserver_upgrade: 2016-02-14 19:53:53-0600 Converting augments.xml

  2016-02-14 19:53:53-0600 root ACL:

  2016-02-14 19:53:53-0600 Nav ACL:

  Created the directory: / var/run/caldavd_requests

  2016-02-14 19:53:58-0600 cannot connect to database schema creation: Broken pipe [Errno [32]

  2016-02-14 19:53:59-0600 may not start or connect to the postgres: md5 password authentication failed

  Failed to start the service.

  14 February 19:54:01 [CalendarServerCommonSetup] send to serveradmin: calendar: command = exportPushCertificates

  14 February 19:54:01 [CalendarServerCommonSetup] output: calendar: exported = 'Yes '.

  14 February 19:54:01 [CalendarServerCommonSetup] performance: /Applications/Server.app/Contents/ServerRoot/usr/sbin/serverctl enable service = org.calendarserver.agent

  14 February 19:54:01 [CalendarServerCommonSetup] output: {}

  }

  14 February 19:54:01 [CalendarServerCommonSetup] performance: /Applications/Server.app/Contents/ServerRoot/usr/sbin/serverctl enable service = org.calendarserver.relocate

  14 February 19:54:02 [CalendarServerCommonSetup] output: {}

  }

  14 February 19:54:02 [CalendarServerCommonSetup] performance: /Applications/Server.app/Contents/ServerRoot/usr/sbin/serverctl enable service = org.calendarserver.archive

  14 February 19:54:02 [CalendarServerCommonSetup] output: {}

  }

  14 February 19:54:02 [CalendarServerCommonSetup] run: / bin/launchctl start org.calendarserver.agent

  14 February 19:54:02 [CalendarServerCommonSetup] performance: /Applications/Server.app/Contents/ServerRoot/Library/CalendarServer/Setup/Calen darServerLogRotationConf

  14 February 19:54:02 [CalendarServerCommonSetup] Service has not been activated previously

  14 February 19:54:02 [CalendarServerCommonSetup] out successfully

• Stat of the system upward with the error: Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c

  Original title: Getting a weird error message. Seems to be the floppy driver.

  Hello. This problem everything seems to start when I changed my drive letters. Finally, I think it points to my floppy drive A.

  I get these error messages when I start my computer. Windows tells me this: No. disc: "treatment of Message of Exception c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c". It happens about 8 or 9 times then goes away.

  I have several internal hard drives, 2 optical drives, A floppy drive, a card reader and a printer. I decided to shift the drive letters down after hard drives since I have recently installed a dual-boot and needed earlier letters to the editor. The problems started before the dual-boot has been installed. Changed this example of drive letters: g-i, h-> j > I-> k, etc. The main readers have remained the same.

  I uninstalled the floppy drive and the controller, Windows re - installed after re-booting of course.

  I disconnected Ribbon floppy motherboard and the power supply. The messages stopped. I then uninstalled the floppy drive and the controller in Device Manager. I reconnected it A floppy Ribbon and power, loaded windows reinstalled the drivers and then gave me the error emssages once again.

  I have a DVD of Windows XP Home Edition 32 bit SP3. Telling me to do a repair isn't the best idea, because nobody has explained how it works. When the DVD goes in the car or at the start: there is no repair function.

  Thank you.

  If you don't see a message like this:

  No disk, Exception Processing Message c0000013 parameters 75b6bf7c 475b6bf7c 75b6bf7c

  Until you can determine what the 'real' problem is with your hardware, you can disable the pop-up message by making a registry adjustment.

  Before making changes to the registry, back up your registry with this free and easy to use tool popular:

  http://www.SnapFiles.com/get/ERUNT.html

  Click Start, run and enter in the box:

  Regedit

  Click OK to open the registry editor, navigate to the following key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows

  In the right pane, check the value of the ErrorMode setting.

  If ErrorMode is set to 0, double click on ErrorMode and set 2 (2 = disabled).

  Click OK to save the changes, and then click file, exit to close the registry editor.

  Reboot your system and check the things now.

  2 to the parameter ErrorMode stops at pop - up message but still material error log in the Event Viewer log.

  Learn more about it here:

  http://support.Microsoft.com/kb/124873

• Error report - process system C:\ 32\SERVICES WINDOWS\SYSTEM. EXE finished unexpectedly W; CODE OF STATE-1073741817

  Original title: REPORTS of ERRORS

  I GET THIS MESSAGE EVERYTIME I OPEN MY PC WINDOWS XP SRX114OOO9511 ID. THE PROCESS OF SYSTEM C.------32\SERVICES WINDOWS\SYSTEM. EXE FINISHED IN A WAY UNEXPECTED W; STATUS CODE - 1073741817.THE SYSTEM WILL NOW SHUTDOWN AND RE-STARTED. STOPPING INIATED BY NT AUTHORITY SYSTEM... I'M TRYING TO SOLVE THE PROBLEM BY FOLLOWING THE INSTRUCTIONS OF ERROR REPORTS

  Hello

  ·        What are the steps you tried to solve the problem?

  ·        This happens at random, or whenever you open an app?

  I suggest you follow the steps mentioned below.

  Method 1:

  Step 1:

  Start in safe mode and check if the problem persists.

  a. restart the computer and keep tapping F8 until you reach the start menu.

  b. Select safe mode in boot options and press ENTER.

  If the issue is not persistent, then perform a clean boot.

  Step 2:

  To perform a clean boot follow the steps mentioned in the link given below.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: Follow the steps to configure Windows to use a Normal startup in step 4 State.

  Apart from that, I suggest you follow the steps mentioned by Non-XP-Prof in the link mentioned below.

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/0d3e5c63-313F-44c4-8cf8-dcfc080bcae5

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Blue error screen: PROCESS LOCKED PAGES

  I'm running a Dell Studio 1555 with Windows Vista. The summer is going very well for the time that I got it before yesterday, when randomly I had a BSoD stating the PROCESS has LOCKED PAGES and now every time I connect it would happen after several minutes. I realize that this error usually has something to do with the video drivers card and things like that, but I have excluded that because my computer works fine if I press the F2 key to change my network card wireless built into the laptop, and if I next turn to the, a few minutes later my laptop would crash. Does anyone know what I could do to fix this?

  Update your latest news from Dell Ricoh card reader drivers:

  rimmptsk rimmptsk.sys Fri Feb 15 04:01:16 2008 (47B554DC)
  rimsptsk rimsptsk.sys Sun Jul 29 21:42:56 2007 (46AD4220)
  rixdptsk rixdptsk.sys Sun Jul 29 22:54:01 2007 (46AD52C9)

  This driver is good, but good for updating PowerISO for later:

  SCDEmu SCDEmu.SYS Wed Jun 15 04:23:56 2011 (4DF86C1C)

  Google this driver to see the many software that installs it (Roxio, AnyDVD are 2 of the many):

  PxHelp20 PxHelp20.sys Wed Sep 17 14:24:26 2007 (4716535 E)

  When you see those who have you, uninstall it / them. If you can't find that, remove PxHelp20.sys in C:\Windows\System32\drivers and then restart your computer.

  Then use the manual method on this page to fix the CD/DVD drive:

  http://support.Microsoft.com/kb/314060

  --------

  And probably the most important of all. This driver Broadcom Netlink Gigabit lan from the link next - update

  k57nd60x k57nd60x.sys Thu Jun 19 21:47:01 2008 (485B0C15)

  and wireless driver from here (or the site of the manufacturer of the adapter) too:

  0: kd > lmvm BCM42RLY
  start end module name
  8b 303000 8b30b000 BCM42RLY (postponed)
  Image path: \SystemRoot\system32\drivers\BCM42RLY.sys
  Image name: BCM42RLY.sys
  Timestamp: Kills Nov 11 22:07:23 2008 (491A486B)
  CheckSum: 0000F7C7
  ImageSize: 00008000
  Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

  http://www.Broadcom.com/support/ethernet_nic/downloaddrivers.php

  Re-enable in Device Manager.

  --------

  Treat yourself... If you follow, you will have a decent machine.

• fatal error restore file error data processing: 0xc000009a hiberfill.sys

  Recently, I restored my Compaq Presario CQ56-219WM laptop to its original factory condition.

  When I put my computer in hibernation mode and back I get a screen that says:

  status: 0xc0000009a

  News: fatal error occurred during the processing of restore data

  File: hiberfill.sys

  Ive done a search on the internet and it seems to be associated with Windows 7.

  My OS is windows 7 64 bit sp1.

  Delete the hiberfil.sys on drive C (can be hidden, you can havbe to show the files hidden by using the folder options)

  After removing restarted the PC, after using it for awhile hibernate the PC, see if it always generates this error after standby.

  If it isn't, an another factory restore.

• Number of Windows Vista issues - updates of device driver error messages from host and error 0xC004D401 process.

  I have a number of questions at the moment and wonder if they are related between them and how to fix each one.

  1. I have sometimes received error: 0xC004D401 "an unauthorized change was made to windows" that force restart the laptop, then the same error comes up and force reboots and this loop until I force shutdown.
  2. I constantly get the message "host process for Services Windows has stopped working and was closed... ».
  3 - My Device Manager displays many symbols yellow exclamation point of 'error' of the brand that are appearing next to "Network adapters", Microsoft 6to4 adapt #13; Map Microsoft 6to4 #14; Map Microsoft 6to4 #3; Map Microsoft ISATAP #13; Microsoft ISATAP # 17 and card Microsoft ISATAP #18. I tried to "Update" of these device managers and looking for changes, but he keeps saying that everything is up to date...
  It's really frustrating because it affects my internet connection (wireless usb modem) and also the proper functioning of my laptop. At this point I could not even access my photo albums and document records they were no where!. My laptop is an Hp and everything just 2 years now and runs on Windows Vista.

  This type of error is often related to incompatible software. If this happened recently, you could try a system restore to an earlier time. Vista is up-to-date service pack?

  System Restore:

  Start > type 'restore' > search for system restore and choose a date. You can also check the programmes concerned.

• (Redirect) - error msg 'restore instant snapshot creation has failed.

  in my activity log, I notice one note an error msg that continues to repeat "restore instant creation of snapshot has failed.  Any suggestions as to what could be the problem? Thnx in advance...

  Padraigmaca thanks for the reply. Please repost this in the laptop computer forum for assistance.

  http://en.community.Dell.com/support-forums/laptop/

• Windows error host process (rundll32)

  in my pc this error on windows host process (rundll32) comes when I start my computer and internet explore. Please help me how to solve this problem.

  Hello

  What is rundll32.exe and why it works?
  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/

  What is the suspicious Rundll32.exe process?
  http://WindowsXP.MVPs.org/Rundll32.htm

  -----------------------------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------

  If no joy trying to determine what is the cause:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.