Error 2753 preventing uninstall/reinstall

I have a laptop Dell XPS 15, and I've had for about a year now. I had a problem lately where I can't uninstall or reinstall all programs on the computer. No matter what I try and any program I try, I get the same error 2753. I read online that the entrant regsvr32 vbscript.dll in the command prompt should solve this problem. This isn't. I don't know what to try next.

EDIT: after further investigation, it appears that it is deleting 99% of the program when I try to uninstall it, but for some reason he can't finish the job. What is happening, and how to I solve this problem?

EDIT 2: Ran Microsoft Fix It Utilities Uninstaller around the fact that a typical uninstall did not work. He managed to remove the program from the list of programs, but all the program files are still there.

Hi Jack_0,

Follow the steps in the article to manually remove the program.

How to manually remove programs from the add tool / remove programs (Applicable to Windows 7)

Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

Tags: Windows

Similar Questions

  • I get error 2753.

    I can't uninstall microsoft silverlight. I get error 2753. I can not open diagcab file fix it Wizard. And have no option "run as administrator" for CMD. Any ideas?

    Sure. It worked for me: http://blogs.msdn.com/b/rpomeroy/archive/2008/06/10/how-to-manually-clean-up-a-bad-silverlight-installation.aspx

    If Silverlight is not working for you and you get errors, try to uninstall, reinstall or upgrade Silverlight the steps below will probably help you.

    Steps to clean a machine to fix a broken Silverlight installation:

    1. Copy these instructions to Notepad, Microsoft Word or any other text editor because you will be asked to close all browsers.
    2. Click to download and run Microsoft Fix it solution 50747
    3. Follow the instructions in Microsoft fix 50747
    4. Visit http://www.microsoft.com/getsilverlight and install Silverlight
  • Uninstall/reinstall my error message sim flight "this file has no program associated with it for performing this action.

    original title: how to create a binding file

    I had to uninstall/reinstall my Simulator of flight and went on to play and this poped message in 'this file does not have a program associated with it for performing this action. " Create an association in the set Associations control panel. " How to create an association?

    Hello

    1. you have made no changes to the computer before the broadcast took place?
    2. What is the exact error code that you get?
    3. what operating system do you use?

    Method 1
    Uninstall the game completely, try the steps from the following link:

    Problems installing and uninstalling programs on Windows computers
    http://support.Microsoft.com/kb/2438651

    Method 2
    Perform the clean boot and then install the game in administrator mode.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
     
    Note: Don't forget to restart your computer as usual by following step 7 after installing the game.

  • Uninstalling Corel error 2753

    Original title: Corel uninstaller

    I'm trying to uninstall Cortel Suite chart 4, particularly the Corel Paint Shop Pro Photo.  Corel tell me to uninstall manually, but when I download their uninstall program, it does not work.  I tried to uninstall it using the installation disc, but a message pops up «error 2753...» is not marked for installtion.  I can't spend the part 'continue' Corel 'send an email' so cannot get a response from them.   I recorded with them but still not found an answer.  Because it takes so much space on my computer, I really want to get rid of it.  Any help would be appreciated.

    Thank you

    Hello

    · What is the full error message that you receive?

    Repair the installation on the computer and then try to uninstall the program. To repair the application following the steps below:

    a. click on start

    b. click Control Panel

    c. click Add or remove programs

    d. click the installer of Corel

    e. click Repair

    f. once the repair is complete, try to uninstall.

    Try the step listed in the link below: how to solve the problems that may occur when you install, uninstall, or upgrade one program on a Windows computer: http://support.microsoft.com/kb/2438651

  • Windows XP TurboTax AVG virus. Now, I'm unable to uninstall / reinstall TurboTax. error message 1635 windows install problem.

    I am using windows XP Pro. First of all, I had an older version of AVG tell me turbotax was a virus. After that installation of the version of AVG update this post has disappeared. TT told me to uninstall and then reinstall TT 2010. However, I'm unable to uninstall / reinstall TurboTax. I get an error 1635 turbo tax which says it's a problem of windows installation.  I called TT and they infomed me that I ahd contact microsoft because it is a problem of windows registry that will not allow the program to be uninstalled completely. They said that Microsoft will have a way to uninstall it completely? Who and how can I contact someone who can take care of this. Any help would be appreciated. AIso, I finished our taxes with Info for 3 businesses in this regard will be al that get lost?  Cathy

    Hi cathy_vt.

    Method 1

    See the below Microsoft article and then try step 1, check if it works.

    Error message: 1635 This patch Package could not be opened

    http://support.Microsoft.com/kb/812490

    Method 2

    If the previous step fails, then return the TurboTax link, and then perform the below mentioned step.

    Error 1635: This patch package could not be opened...

    http://TurboTax.Intuit.com/support/IQ/installation/error-1635--This-update-package-could-not-be-opened---/SLN12446.html

  • I have an 0xC0070678 error code, I uninstalled AVG and reinstalled and now get the error message internal General. MSI engine failed to install the product. Help

    I have an 0xC0070678 error code, I uninstalled AVG and reinstalled and now get the error message internal General. MSI engine failed to install the product.  Now I have no anti virus.help please

    Hello

    It is a specific error of the AVG software. There are number of threads on the same topic on the forums of AVG.
    Reference:
    http://forums.Avg.com/us-en/AVG-free-forum-search?sec=search&Act=show&ID=0&Search=1&type=posts&user_nick=Davo1330&subthemes=1

    http://forums.Avg.com/au-en/AVG-free-forum-search?sec=search&Act=show&ID=0&Search=1&type=posts&user_nick=pcroft&subthemes=1

    See also:
    If you have problem install/uninstall/upgrade to update AVG: AVG 2011 + 9.0 + 8.x uninstall / re-install Instructions
    http://forums.Avg.com/ww-en/AVG-Free-Forum?sec=thread&Act=show&ID=110317

    I hope this helps.

  • I'm trying to uninstall acrobat 7 pro.  I get error 2753, UninstManager.dll and uninstall stops.

    I'm having problems with Acrobat 7.0 pro.  I wanted to do a uninstall and then re - install to get a clean load, but I get msg error 2753 UninstManager.dll and uninstall stops.  I use this on a PC with Windows 7.0 Pro, 64-bit.  Any suggestions?  Thank you.

    Acrobat 7 is a very old version and is not compatible with Windows 7. It's time to get a newer version.

  • updated creative cloud but receive error code: 87 recently upgraded my os to win 10 What are my options uninstall reinstall

    updated creative cloud but receive error code: 87 recently upgraded my os to win 10 What are my options uninstall reinstall

    update by downloading the files directly and then apply them:

    CC updates: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html

    updates CC 2104: http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html

    updates CC 2015: http://prodesigntools.com/adobe-cc-2015-updates-links-windows.html

    and for error code 87 patches, installation of cloud creative error 87

  • Pro 9.0 error need to uninstall and reinstall

    Tried to use 9.x Pro and when it is open get error need to uninstall and reinstall.  Looks like there is something I need to do with the key before uninstalling?

    Hi denniss18693182,

    In case you have the serial for Acrobat 9 key you can move forward & uninstall Download Adobe Reader and Acrobat tool - Adobe Labs.

    If you start the application, please disable (Help menu-> disable/SignOut).

    Install it using this link products download Adobe Acrobat: 9, 8.

    Kind regards
    Nicos

  • Lightroom won't open with "Configuration error. Please uninstall and reinstall this product. Error: 16 "

    On a Mac running OS x 10.11 and final version of Lightroom CC from today.

    Before updating to lightroom, everything was fine. After lightroom update at startup, I get:

    Configuration error

    Please uninstall and reinstall the product.

    If this problem persists, please contact Adobe technical support help and mention the error code displayed at the bottom of this screen.

    Error: 16

    http://www.Adobe.com/support/

    [OK]

    So I uninstalled Lightroom desktop CC application. He asked me if I wanted to remove preferences, and I said yes.

    I have re-installed Lightroom and exhibit the same problem.

    Research on here, I found a reference to make sure that/Library/Adobe and ~/Library/Adobe are writable. I think that it was a typo: this file does not exist, but/Library/Application Support / Adobe and ~/Library/Application Support/Adobe exist and are writable.

    Any ideas?

    Thank you

    Andrew

    Hi AndyKirby,

    • Open a Terminal.
    • Copy and paste this command: sudo chmod-r 777 library/Application\ Support / Adobe
    • Press enter and give your password if requested.
    • This should fix the permissions at the origin of this error.
    • Let us know how it worked and mark the correct answer if it did.

    Kind regards

    Tanuj

  • Fatal error 2753

    I have a laptop HP and HP photosmart aio printer 4200.  Operating system is Windows Vista Home Basic.  Maintained have installed w / repeated problems whenever I started to the printer, so I contacted hp.  They had me going through a number of exercises, which none worked!  One of their solutions was to remove the SOLUTIONS CENTRE, after which I can NOT reinstall the entire package the printer this happened for months and I'm very frustrated that I can't use my printer/scanner.  In my research (days/hours!), I came across something on a (?) .dll file in the registry. He has supposedly make it w/a Atl.dll file in the registry.  So, I typed in c:\windows\system32\atl.dll and got a msg "the moddule c:\windows\system32\atl.dll was loaded but the call to the Dll register server failed with error Code 0x8002801c ."  I tried to find something on this, but I can't.  My initial problem is the printer will not reinstall after uninstall/reinstall repeated attempts.   I get error 2753 msi.dot4wrp message and.  It's a computer for domestic use only and not networked.  Please know I am NOT a computer-type person, but I try to understand and to find a solution!  I know others have had this same problem!  Can someone help me?  Thank you!

    I think that I would visit HP printer support pages, for your model of printer, use the HP tool to completely remove the HP printer drivers / software, unplug the printer, restart the PC. Then run MSUpdate to ensure that your critical updates are installed.
    Then check MSUpdate history to see if you made the mistake to install all the drivers for your laptop, if so go back to HP support for your notebook pages, reinstall the drivers from HP, restart your PC
    Run Disk Cleanup
    Revisit the HP support for your printer, install the latest printer drivers/software, only connect the printer when you are asked

  • Can not uninstall/reinstall iTunes because of the missing file iTunes6464.msi

    Recently the resources have been insufficient in my C drive. The it guy in my office found because I had 3.5 million .jgp files stored in a folder of windows media! YES 3 500 000 jpg files!

    Decision of Directors... delete the folder. With that, I lost my desktop icons, Skype and iTunes. I was able to reinstall Office icons are back. I rarely use Skype so no question, I've uninstalled it. I will return later.

    The dilemma is now no iTunes, does OK icon... the process should be, do a uninstall/reinstall. With a massive library I want to do it right and who would be in Control Panel/programs/iTunes/uninstall. Alas, I can't.

    The message I get is "the component you are trying to use is on a network unavailable resource.  Click OK to try again or enter a different path to the folder containing the installation package "iTunes6464.msi" in the box below. This item is not found.

    I have downloaded and run the latest version of iTunes6464setup to be told that "a newer version of iTunes is already installed"... the installer closes.

    So now I'm in an add that not only no icon iTunes but no way to unistalling/reinstalling.

    I'm looking for help. :-)

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    Start by missing error MSI.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

    TT2

  • Toshiba bluetooth BT1.2/2.0 error 2753 setupdiu.exe

    I have the cdrom and dongle for the above, but when I want to install the driver and the software I get an error message * error 2753 setupdiu.exe not marked for installation. Does anyone know how to overcome this please? I am running XP Pro thank you gtwt

    Hello

    New version of BT stack has been already issued
    Uninstall the old BT battery, clean the registry (CCleaner is a good tool) and after rebooting again to install the new downloaded BT stack.

  • How to solve the internal error 2753

    How to solve the internal error 2753

    This error relates to a problem installing Windows.
    When you try to install or update anything when the message appeared?

    If so, one thing you can try is this:
    -Click on start, select run... and type CMD into the DOS command prompt
    -Type regsvr32 vbscript.dll in command prompt and press ENTER.
    -You should see a message saying that DllRegisterServer in vbscript.dll successful, click OK

    Now you can try to reinstall the program/application/update.

    If not, can you give us some info on what you were doing when the error occurred?

  • I have a Dell (Dell V305) printer that is only a year. He has been guaranteed. What was happenning, is that the printer does not print up what I uninstall/reinstall.

    I'm having a problem with my printer does not print.  What I do I uninstall the printer and reinstall then it works very well for a week or two and then the problem starts again until I have reinstall the printer again.  The printer has ink, so it's not the problem. That's how I know it does not print: when I try to print a cartridge level page show empty and I can't print.  Yet once, when I uninstall/reinstall the printer, then the catridge levels show complete and then I can print.  I thought that maybe it could be that some issue that when I uninstall the printer that not all components are removed.  I uninstall not uninstall printer functionality and not the Add/Remove Control Panel.  Uninstall from the control panel would solve this problem?  Please notify.  Thank you, John

    Hi sockers,.

    1. did you of recent changes on the computer?

    2 when was the last time it was working fine?

    3. do you have security software installed on the computer?

    4. you receive an error message when printing?

    I suggest you run the fixit tool available in the link when you are unable to print on the computer and check if it helps below.

    Problems printing and printing errors

    http://support.Microsoft.com/mats/printing_problems/

    If the previous step fails then I would suggest that you uninstall the software from the printer to the computer using the method mentioned in the link below and then install drivers from the Dell site.

    Uninstall Dell V305

    Drivers & downloads for printer V305/V305w AIO inkjet

Maybe you are looking for

  • How can I do embedded in the PDF Viewer Firefox remember last position displayed in PDF file?

    As for now, it doesn't. I have a big book PDF and I want to pick it up where I finished the last time.And there is no function "mark page in PDF format.

  • IPhone 6s died suddenly

    Hello everyone, something really weird happened today with my iPhone 6s, she really worked very well, the battery was good, I mean good period, I was also on the latest version of the firmware. I was listening to music when it stopped suddenly, I was

  • How to identify the model number Toshiba Satellite A210

    Hello I have a Satellite A210, now, I would buy an extra RAM. On all the Ive visited the site, they ask for a little more information. They ask for a Satellite A210...I looked at the sticker on the bottom of the laptop, but that only shows the A210.

  • Satellite P300-22R - missing letters when you type too fast

    Hello! I found a lot of articles about my problem in the internet, but I have not found a solution My keyboard on my P300-22R ist no longer works. If I write a little too fast, there are a few missing letters or they come twice. I already read the ht

  • 4730 proBook s: ProBook 4730 s drivers

    Hello I had just upgraded to professional Win7 64 bit and some problem locating a few divers: (Here's the hardware ID) 1. network controller PCI\VEN_168C & DEV_002B & SUBSYS_1461103C & REV_01 PCI\VEN_168C & DEV_002B & SUBSYS_1461103C PCI\VEN_168C & D