Similar Questions

• Error 28000 Installation of Acrobat Licensing Module has failed...

  I have a hard time with this stupid thing.

  The error that says "for possible workarounds for her to this problem, please refer to http://www.adobe.com/go/acrobat_installation_rollback.

  Workaround does not work and I wouldn't uninstall versions of work, existing software written for a demo of Adobe Acrobat DC. I can't recommend this purchase as an update to our existing software at this point. Which is pretty crappy, considering the version of Adobe Acrobat Pro, we did absolutely terrible work of converting PDF to other formats.

  I was able to install by editing the registry HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion, particularly this key: String: CommonFilesDir-> value: C:\Program Files (x 86) \Common Files

  Instructions available here: installation of Acrobat X and XI restoration | Windows 64-bit

• Setup error during installation of the package of added value

  I just installed PVAT v 1.2.40. However during the installation I get an error - Setup PVAT Error (Ox8145030B). I have also tried to re - upload the files, and then repeat the installation with the same result. All ideas

  Richard

  Hi Rpayne32,

  What laptop you have exactly?
  Where did you downloaded package of added value?
  The operating system that is pre-installed in Toshiba or your own installation of Windows that you are using?
  Try you added value package update or new installation?

  In my opinion, you should check your antivirus or firewall. I think that something is blocking the installation.

• Equium A100-549: blue screen error during installation of the recovery CD

  Hey,.

  I recently bought a Toshiba laptop computer, everything worked perfectly until my laptop was attacked. I've got rid of the virus and went to reformat due to a lot of problems that occur. The main one being a mistake has cursed and 'Blah blah' program must be closed. As I continued to get loads of errors.

  http://aumha.org/win5/kbestop.htm
  The types.

  Now then reformatting disk Toshiba said just put the disk in the drive and turn off. I did very well. The said toshiba drive press F12 on startup and then click on run the CD. The CD starts and gets half way thro reformatting.

  Suddenly, I get a blue error screen. I thought oh well ill reboot and continue. This is where the problem started. Because I was half way thro removal/reinstallation of windows I was missing some files. I'll reinstall or try to use the Toshiba CD, I get a blue error screen.

  0 X 00000050: PAGE_FAULT_IN_NONPAGED_AREA
  (Click to consult the Online Win XP Resource Kit article, or see the Windows 2000 Professional, p. 1548 Resource Kit).
  The requested data were not in memory. An address of invalid system memory was referenced. Defective memory (including main memory, L2 RAM, RAM video cache memory) or incompatible software (including remote control and antivirus software) might cause this stop message, as may other hardware issues (for example, incorrect SCSI termination or imperfect PCI card).

  Any ideas what I can do? I don't want to return the Toshiba laptop to fix However im thinking this is the only way out.

  Please if repplying try to keep technical language to a minnium. Thank you, Dan.

  Hello

  It s very strange because the installation since the Toshiba Recovery CD should work properly and without any blue screen message.
  Usually, if the BSOD appears if there is a serious software problem or something wrong with the hardware.
  I don t think that the software on the CD of restoration could be corrupted.

  Have you tried to install the OS from the original CD of Microsoft Windows? It would be very interesting to know if the blue screen also.

  However, I think that your laptop is new and the warranty is valid. In my opinion, you should ask the after-sales Service of Toshiba partner to help him because guys could start the diagnostic test and can find the fault.

• Collage error: runtime error. Error: access violation, address of the error: 0000 P 280, the Module name: GFSData.DLL

  Hello to all on the forum,

  I am running DIAdem 2015 (15.0.0f6005) on a Windows 7 Pro SP1 i3 4 GB RAM machine.

  I want to evaluate a test. Data are expressed as 25 .txt files. I need to plot, one of the values on the whole test time. I tried to combine the data from all 25 in one file .tdm .txt files. I came far enough until I met my problem. After gathering around 15 .txt files in a .tdm, tiara doesn't let me continue. It gives this error message (in German, I'll translate as good as possible):

  "When executing command 'DataBlClpPaste('1-52',1859122,0)' a rumtime error has occurred.

  Error: ACCESS VIOLATION

  Address of the error: 0000 P 280

  "Name of the module: FGSData.DLL.

  I will describe my procedure in which this happened:

  -Open the .txt with plugin I had created the first import

  -Ribbon with two windows view channel: have the target in a secondary window group, drag the newly imported from .txt in the other channels

  -In the secondary window with new data, select the lines I want to add to the data target group by clicking on the first line, then scroll to the last row and shift-select that. CTRL + c to copy the data

  -In the target group, click the first empty line, and then ctrl + v to paste data here

  After the last step, instead of pasting the new data in the target dataset, the above message error. I can't do anything, but click on 'ok '. After ok, the program window will not respond to any click except for switching between Navigator / View / analysis /... I have to close DIAdem, where I can always select "close and save", that works too.

  I could go a few times after reopening DIAdem, but finally, which stopped working. It now gives me the error message whenever I try to do this routine. The .tdm file is 21Mo now, the .tdx is 1.1 GB.

  I appreciate any help on this, I really would prefer combining data using DIAdem on trying to copy and paste around 1 GB of data .txt into one giant .txt file. It takes very long to not even open a .txt of 50 MB file, I fear this would be a messy process.

  Best regards

  Simon

  If you are using DIAdem 2015, there is a new entry in context menu where you can select Add.

  Maybe it helps.

  The help of DIAdem 2015:

  Adding data

  
  

  Adding data to merge similar series ratings data in order to deal with them. In the process, DIAdem adds the data to load for existing channels with the same name in the data portal instead of storing data in new channels. Perform the following steps to add the external data area data channels in the data portal:

  1. Open the NAVIGATOR tiara.

  
  

  2. Select remove internal data to delete the data in the data portal.

  
  

  3. Find the Demo1.tdm file in the file browser.

  
  

  4. Drag and drop the file in the data portal.

  
  

  5. Select the Demo2.tdm file in the file browser.

  
  

  6. Open the context menu of the file and select Add data.

  
  

  Tiara adds the data in channels that have the same name in the data portal. In the properties of the Data Portal window, you can see that the number of values in the channels has doubled.

• Error on installation of the security updates: 0xF00B0004

  The following updates fail

  Windows XP (KB974112)
  Windows XP (KB969059)
  Windows XP (KB975025)

  with the 0xF00B0004 error code.

  Several attempts still result in the same error code.

  What can I do?

  In fact, auto update failed for nearly 10 days (used daily). I just found the problem by accident - I expected to see a box of error message advising me!

  Thank you
  Gerd

  See the section "How to get help", for example, http://support.microsoft.com/kb/974112

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Start a free Windows Update support incident email request:
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Fatal error during installation of the software for Officejet Pro 8500 A909g in Windows XP

  This error occurs during the last stage of the installation. I downloaded the latest software from the HP website as well as the supposed "XP Fix", I used the HP service, I used the brush cleaning HP to completely erase the old files and re-installed.  I've exhausted ALL the options on the Web site to correct this. Nothing works. I spent over 8 hours to solve this problem.  My computer guy said it of because the software has been updated to run Win 7 and is not able to access the XP of the software part to make it work.

  Error Situation code: 03867699

  Error Situation code: 24370865 "fatal error during Installation" 'C:\Program HP Imaging\ {F86D9734 - D358 - 4C5B - BC2B - 6D90557FF05B} \hpzsetup.exe' "-adding a device.

  I see other similar messages but can't find an explanation or difficulty.

  Help would be greatly appreciated!

  The only thing to do would be to format and reinstall the OS.  It's a little extreme, but it should work.  I'm sorry, but that's the last thing I know to try.  If you try this, make sure that you back up all your data.  Good luck.

• Error of initialization of the module location-essmsh

  Can someone tell me why I get an "Error initializing module location" error when I run the "essmsh" at the bottom of the path where it is actually stored.

  C:\oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseServer\bin > essmsh.exe

  However it works fine when I do C:\oracle\Middleware\user_projects\epmsystem1\EssbaseServer\essbaseserver1\bin where startMaxl.bat resides without even to start the file "startMaxl.bat".

  I've updated the path in the environment variable. But no luck. How can I get this done from anywhere in the system. ?

  Thank you

  Why not try and update the script for

  c:\oracle\Middleware\user_projects\epmsystem1\EssbaseServer\essbaseserver1\bin\startMaxl.bat-l NZSpassword s 198.162.49.33 C:\INTEGRATION\XXLOAD.msh admin

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• ORA-12560 error during installation of the Setup Wizard

  I tried to install Oracle 10.2.0 (10g) on Windows Server 2008 R2 and had this error in the middle of the General installation and 2% of the installation of the Settings Wizard.
  
  The error is perhaps due to the certification of R2 (Windows Version 6.1). If not, any help?

  I ' v got the same error.
  Just refresh after login.

  Here is the link where I found the bug ID:

  http://www.webxpert.ro/Andrei/2009/02/23/Oracle-10g11g-install-on-Windows-2008-Server/

• Installation of the Module LabVIEW 2012 SP1 FPGA with LabVIEW 2012 SP1 64 bit on Windows 7 X 64 machine.

  I installed 32-bit and 64-bit LabVIEW 2012 SP1 on Windows 7 X 64 computer. After that, I installed SP1 FPGA Module. While module FPGA completely installed in the 32-bit version and could develop projects fpga, FPGA interface has not installed the 64-bit version. Anyone had this before question?

  The document 5WMF8NQ2 knowledge base says it's doable.

  I have tried to repair the installed module, remove and then reinstall the module. Nothing helped me to get the FPGA interface on a 64-bit host VI. Any suggestions? Addition of the individual screws through the range of editing functions like a tedious process and the palette is not completely functional.

  I solved the problem. Had to repair each driver separately for LabVIEW 2012 SP1 64 bit installed on the default drive. You may need to copy paste files to the folder that it installed in function.

• Hi, am getting error 28000 when trying to install newly purchased Acrobat Pro DC on my PC Windows 8.1. Have tried listed difficulties, but no luck.

  Hello

  I try to install newly purchased Adobe Acrobat Pro DC on my PC Windows 8.1 but keep

  get the error 28000: the Adobe license purchase of module Installation failed. Reach...

  Help!

  Hello Kent,

  Please try the following: steps:

  > Activate the hidden on Windows 8.1 Administrator account (Ref: http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista / )

  > Disable all non-Microsoft-start Services. (Ref: http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )

  > Disable all Antivirus software like Norton, McAfee etc temporarily from the computer Mc.

  Reboot and try to install in the new active Admin user account and check again.

  Let me know if you are still having a problem.

  Kind regards

  Nicos

• Installation of the printer driver Officejet G85 fails with the message "print processor does not exist" with Windows 7

  The site compatibility Windows 7 says that this OS is compatible with my Officejet G85 all-in-one old.  Whenever I try to add this printer is using the automatic functions or manual installation of the driver fails and I get the error message that "print processor does not exist.  I tried to install the original with the most recent compatibility software is Windows 2000, but Windows 7 does not allow indicating that the program already exists and I have to uninstall it first.  However, I can't find it listed anywhere for uninstall it, and the original software disk does not have this feature either.  HP does not support printer and would not help provide.  This printer worked perfectly with Windows XP and we really like it is equipped.  Please help us raise this printer up and running with Windows 7 64 bit home edition.  I tried things I found that it was similar in the forum with no success so far.

  Hello

  You can run the printer troubleshooter. Convenience store solves some common printing problems.

  If your computer has problems printing, try using the printer Troubleshooter to solve the problem. He made sure that a printer is connected to your computer, and it checks for common issues such as whether the printer has enough paper and toner to complete printing your document.

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  Reference:

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  See the following articles from Microsoft for more information on installing a printer or driver printer:

  Install a printer
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  If the problem persists, you can contact the manufacturer of the printer for more information.

  http://WWW8.HP.com/ca/en/support-drivers.html

  Hope this information helps.

• Error: 0xc0000005, installer of Windows modules stopped working and the launch failed password

  Original title: Hello,.

  my Dell computer is running the following errors: 0xc0000005, modules Installer Windows stopped working and the Word failed to launch. I need help with this.  My system is Vista Home. Thank you.

  Hello Ewazn,

  ·         You get this error message only when you launch Microsoft Office applications or launch any application?

  You can view the article in the Microsoft Knowledge Base and check if it helps.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Please elaborate on the question so that we can help you in a better way.

• I can't update my Add-Ins. I always get the error: unexpected installation error - 203 when installing the modules. I have found a workaround for Windows, but I have MacOS. Can you help me?

  Mac OS 10.6.6 system

  They are also for the Mac. If the first link which cor - el posted is information showing for Windows, in the right-hand column under where it says "help", select Mac OS X and Firefox 3.5 - 3.6

• Errors of installation of the packages of component of Blackberry in Eclipse

  I tried to install the Blackberry 4.7,0 and 5.0.0 component Packs.  Instructions found on the Blackberry developer, web site and followed them, but I get the following error:

  An error occurred collecting elements to install
  Error closing the output stream to net.rim.eide.feature.componentpack5.0.0/org.eclipse.update.feature/5.0.0.7 on repository file:/C:/Program Files/Eclipse /.
  Decompression C:\DOCUME~1\yyyyyyy\LOCALS~1\Temp\net.rim.eide.feature.componentpack5.0.0_5.0.0.74513675979636089606.jar error: invalid zip file format

  I use Eclipse Ganymede 3.4.1 on a Windows XP system.

  I'm going to help... Software updates... Software available... Add a Site...

  I put http://www.blackberry.com/go/eclipseUpdate in the location box and it comes back with the packs of two components but when I try and install a pack, he gets to halfway through the installation process, then displays the error message above.

  It seems that something is interrupting the download.  You have a type Internet Security software installed on your PC?  If so, please disable it during the installation.  Note that you need to remove your temp directory before you try to install it again.