Similar Questions

• Jam - HP Officejet 8500 pro error - please help, deployed without return option

  Jam - HP Officejet 8500 pro error - please help, not deployed to M.E. no return w/lovely HP option

  I have a month old HP Officejet 8500 Pro, which suddenly give a paperjam error message.  There is no paper jam.  I spoke with HP Technical Support making long resets even blow the bowels to air without result.  It must be a simple mistake.  I saw it reported on other boards, but it seems that everyone is simply trading on their printers.  Not an option, like HP, in their infinite wisdom will not replace a defective unit overseas.

  I thought that there is a paper feed guide that hung above the paper tray.  It's hangin' is low... but maybe I was mistaken. If I tilt the printer back it will feed and eject a page, but not print.

  If someone at HP would be so likely to enlighten me I would willingly do what is necessary to take part, or whatever...

  Help... Help... Help...  Thank you...

  Here is a link that will help you.
  http://goo.GL/vxhuH
  
  It may be a sensor that went bad in the printer that generated the message.

• U44M1I210 error, please help!

  When I try to install the updated from CC to CC 20141 2014 I get a U44M1I210 error, please help! Updates worked fine through the front console.

  Hi Denisz,

  Please follow the suggestions mentioned in the article below and check if that helps.

  Error U44M1I210 | Install updates

  Let me know where you always get the same question.

  See you soon!

  ~ David

• VMware Workstation Installation ERROR Please help me

  Installation ERROR Please help me

  

  my system:

  

  Welcome to the community,

  In the error message, I guess you have a kind of endpoint protection software installed, which blocks access to the registry Run keys!

  André

• 213.5 error please help me get the DW works again. Thanks CaptJim4685

  I have a Mac OS 10.10 used the Migration Assistant to move all the files from the old computer to new computer yesterday. Now can't use my Dreamweaver CS 5.5 I have my original installation disk. Tried that. Get the 213.5 error please help me get DW works again. Thanks CaptJim4685

  In my experience of software migration from one machine to another rarely works.

  Use the tools CS cleaner to wipe all trace of DW in your system before reinstalling.

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  Disabling an old product is necessary if you previously had it installed on 2 machines.  If you did, you need to contact Adobe customer service to disable your old facilities so you can activate the last being.

  Contact the customer service

  Nancy O.

• I have a Macbook Pro (17-inch late 2011) is fully compatible with El Capitan and Maverick. I'm a little hesitant to upgrade. Tried before with e lCapitan and was NOT successful Please HELP

  I have a Macbook Pro (17-inch late 2011) is fully compatible with El Capitan and Maverick. I'm a little hesitant to upgrade. Tried before with e lCapitan and was NOT successful Please HELP

  Why has been upgraded to El Capitan failed before?

  The only problem is that some applications require the upgrade and some devices that connect to the computer require updated drivers up-to-date. The problem is that for some devices and applications updates are not available and so they do not work with El Capitan.

• My Instagram app will not open it keeps saying: "pending". I have tried to delete the app, off my phone and still nothing! Please help thanks

  My Instagram app will not open it keeps saying: "pending". I have tried to delete the app, off my phone and still nothing! Please help thanks

  You said that you tried to delete the app

  If you have not been able to

  Settings - general - storage - Storage - find the app - delete

  Do a forced reboot - after all open applications using the app Chooser - invoked by fast double pressing the home button and drag upwards on each app until it disappears from the screen.

  Meet the sleep/wake and home buttons down until you see the logo  - then release and allow normal start upward

  Then re download the app

• I want to add a fingerprint on my iphone 5s, but I can't. It shows unable to complete Setup touchid please go back and try again. Please help what should I do?

  I want to add a fingerprint on my iphone 5s, but I can't. It shows unable to complete Setup touchid please go back and try again. Please help what should I do?

  Keep trying. But first, I restart the phone.

  To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

  If she agrees not always the fingerint, reset all settings. No data is affected, but you will have to re-enter all the parameters of the device and the phone will restart on its own. Settings > general > reset > reset all settings.

  Always make sure your finger is clean, free of any oily substance and the same goes for the home button on the phone.

• problem installing windows 7 finishing installation scope and freeze for hours please help

  problem installing windows 7 finishing installation scope and freeze for hours please help

  my pc req:
  2 GB of ram
  NVIDIA geforce 210 1 GB
  180 GB
  Pentium 4 3.40
  Help, please

  Turn off the computer.

  try to start safe mode, start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. Select Safe Mode.

  Log, click Start, type Device Manager, press ENTER.

  Expand graphics cards

  Right-click your video card, click on uninstall.

  Restart your system

  Log, click Start, type Device Manager, press ENTER.

  Expand graphics cards
  Right-click your video card

  Driver update software; then click search automatically for updated driver.

• I had no idea that I needed to use a CD to download my Adobe Photoshop elements 12 on my MAC and have already registered the product; Now, how can I download it? I tried to develop on the web and no luck! Please help me!

  I had no idea that I needed to use a CD to download my Adobe Photoshop elements 12 on my desktop MAC and have already registered the product; Now, how can I download it? I tried searching on the web and no luck. Please help me!

  You don't need a CD to download anything; just download & install the trial version of http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements, and then activate it with your serial number.

• SQMAPI.dll and load on Vista error Please HELP!

  After restarting my laptop to factory settings I get 2 errors.  I have Windows Vista on the computer on which the errors. The first error occurred just after the "preparing your desktop scene" and he says, ' error loading C:\Program may Explorer\iessetup.dll "and the second showed upward after that I tried to install SP2 and it says"SQMAPI.dll is not found"Please help me in correcting these errors.

  The other post:

  When I ran that he stopped at 72% and said "Protection of resources Windows could not perform the requested operation." I have Windows Vista on the computer on which the errors. I get 2 messages after I tried to restore my computer to factory settings. The first sets out, "error loading C:\Program may Explorer\iessetup.dll" and the second says "SQMAPI.dll is not found" Please help me to correct these errors.

  Hello

  Did you change your computer?

  I suggest you to follow the links and check out them.

  Method 1:

  Step 1:

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  Step 2:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  See also:

  Learn how to install Windows Vista Service Pack 2 (SP2)

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

• I have an error, missing wxmsw262u.dll and I don't know how to fix this error, please help.

  Try to find a solution to this problem and do not receive the case? I have read that I need to get the file off her recycle bin but that is empty. My PC Tools has been clean the tray for me is not that nice. I tried a recovery tool, but the file has disappeared for a long time to recover. I have the game Unreal Tournament 3 abd she needed a server crash bu patch that he would charge not because of the missing dll file. I can't play my game and I'm going to cry, I.; m 57 years and don't have a lot of time left in the world so please help me soon.

  Hello

  There is a long list of things to try to solve this problem

  you have to work your way through them

  http://pcsupport.about.com/od/findbyerrormessage/a/wxmsw262u-DLL-not-found-missing-error.htm

• Stop action does not (and other errors) Please help!

  Hi all

  This is my first attempt at an interactive chart with flash professional.

  Work on a Mac (OS 10.8.5), Flash Proefessional CC.

  I created 6 frames, and I'm ready to start the animation. I want users to be able to click on one of the 5 buttons on the first image, this will lead to a corresponding frame that contains a bunch of buttons that link to external sites. Each of these images, there is also a button that links users to the first image.

  This should be very simple.

  The problem comes from the GET very go, I can't even control stop working [stop();] so when I test (Enter cmd), he just continually travels 6 images.

  I saw a forum where someone said that if there is a flash error will just ignore the script and scroll through the images. It seems really weird to me that Flash would just ignore if there is only one error in the script. Is this really the case?

  I had a few mistakes, but looking around on other forums I didn't understand what they meant.

  Here's what came:

  Supported text is limited. It is generally recommended to include the text as HTML (see DOMElement) elements. (125)

  Radial gradient (not oval) circulars are supported only.

  In EaselJS frame numbers start at 0 instead of 1. For example, this STOP button and gotoAndPlay calls. (3)

  Happy with the two Bitmaps and buttons can generate errors of local security in some browsers to run from the local file system.

  So I won't be able to do anything whatsoever as long as one of these erros occur? If this is the case, other than Googling through a bunch of forums that may or may not explain things in language I can understand, does Adobe offer a resource to help users resolve specific errors? Another that the gradient, I have no idea what one of these facilities, and the search thorugh the forums did not help.

  What I'm trying to do should be very simple, but it gives me a lot of trouble. I went through a lot of Lynda tutorials, tutorials from Youtube and even Adobe Tutorials and I thought I was ready to start add actions, but obviously I'm missing something fundamental. Please help me!

  See you soon!

  Patrick

  I made an animation from scratch and everything has been published on very well until I added an audio file with a very long name - then I got the white screen. I removed, shortened, reimported it and viola... I had images- and his! Yay.  (I downloaded your file. Just shorten the library names did not do the trick.)

• How to display the output of PL/SQL and difficulty package below error (please help)

  -PACKAGE SPECIFICATION AND met with success, but I see no way out, an error is also here... Please help. How do I solve this problem
  -with the code
  
  CREATE OR REPLACE PACKAGE package_variables
  -Declare the components of a package.
  Established PROCEDURE (VARCHAR2 value);
  Public FUNCTION get RETURN VARCHAR2;
  END package_variables;
  /
  
  
  
  CREATE OR REPLACE PACKAGE BODY package_variables
  -Declare the package-scoped variable.
  variable VARCHAR2 (20): = "initial value";
  -Define the function
  Get function RETURN VARCHAR2 IS
  BEGIN
  RETURN variable;
  END get;
  -Define the procedure.
  PROCEDURE set(value VARCHAR2) IS
  BEGIN
  variable: = value;
  The END value;
  END package_variables;
  /
  
  
  
  Result VARIABLE VARCHAR2 (20)
  CALL package_variables.get () IN: result;
  SELECT: result AS result FROM dual;
  
  
  RUN package_variables.set ("new value '");
  CALL package_variables.get () IN: result;
  SELECT: result AS result FROM dual;
  
  /*
  
  OUTPUT
  
  
  PACKAGE compiled package_variables.
  PACKAGE compiled package_variables BODY.
  
  Error at startup on line 2 of the command:
  CALL package_variables.get () IN: results
  Error report:
  SQL error: ORA-01008: not all variables
  01008 00000 - "not all variables.
  * Cause:
  * Action:
  RESULTS
  --------------------------------
  
  
  1 selected lines
  
  anonymous block filled
  
  Error at startup on line 2 of the command:
  CALL package_variables.get () IN: results
  Error report:
  SQL error: ORA-01008: not all variables
  01008 00000 - "not all variables.
  * Cause:
  * Action:
  RESULTS
  --------------------------------
  
  
  1 selected lines
  
  */

  The package name is package_variables (note the 's'. Plural.) But using package_variable (in the singular) in your call.
  Also select in as a SQL statement seems to be not valid. You encapsulate a begin - end around her block.

  SQL> begin
    2  select package_variables.get into :outcome from dual;
    3  end;
    4  /
  
  PL/SQL procedure successfully completed
  outcome
  ---------
  Initial Value
  

• iTunes Installation error please help

  He said something like "Microsoft VC80. CRT. TYPEblah blah blah... "do not have time to remember that.

  I install 12.4.1 but it always sends error I tried everything I tried to ignore the he and the other a jump

  "Apple Media Device" something like that so I tried to ignore it too and the installation is done so after him, the application used to open.

  I don't know how to fix it. I tried searching on how to solve this problem, but there is still no response. and I think maybe that apple has the answers.

  Please help me on this installation.

  I am running Windows 7 Ultimate Service Pack 1

  I wish someone could help and answer to all my problems on this Setup error.

  I really need the iTunes.

  I really need to install itunes