Stop action does not (and other errors) Please help!

Similar Questions

• Stop(); Action does not work in AS3?

  I am a designer and usually work in AS2.

  But I created a movie in as3 (to use the function of the BONE), and now my actions to stop do not work.

  What I usually do for my movies, it's breaking down the film in some parts of the main timeline (content, start, end), place stops on each of these frameworks.

  And in the clips that play on these labels, I put a call:

  Stop();

  _root.gotoAndPlay ('content') etc...

  in any case none fixed this in AS3?

  I use CS4 if it matters.

  The stop() command works as well in AS3 as it does in AS1/2.  What does work is to use AS2 terms such as "_root".  In general, if a stop() command does not is because another code's fault or otherwise of the substitution of the stop().

• Hi, after all stages of extraction of data from oracle to oracle during the execution of command "start extract ext1" his error giving the Manager does not work, can you please help me. Thank you

  Hi, after all stages of extraction of data from oracle to oracle during the execution of command "start extract ext1" his error giving this handler does not run both source and target, can you please help me. Thank you

  Hello

  The setting should be as below, and not only the port number should be...

  PORT 7809

  Kind regards

  Veera

• I can't connect to my hotmail and windows live reset does not work for now please help

  I can't connect to my hotmail address and reset link does not work... keeps telling me to come back later

  Hello

  Please repost in the correct hotmail forums the link below

  http://windowslivehelp.com/product.aspx?ProductID=1

• MacBook does not start without warning, please help I'm losing my mind

  MacBook pro froze performs a simple operation. Got the wheel turns and could not enter the finder, etc. Did a hard reboot. Now the computer does not start. I get the apple journal and the bar for a minute or two and then a zero symbol IE forbidden - a circle with a line through it.

  Surprisingly, it is less than two months after a similar disaster where the computer would not suddenly start. In this case, I was able to get repaired the program apple logic board (the problem was compatible with the congenital fail GPU result).

  Incredibly this time the macbook seems to be in even worse shape. I don't get anything useful from the startup keys.

  cmd R - take me in a gray screen no symbol

  D - no symbol grey screen

  option D - it took a while but eventually I got to choose the network, then it seemed to freeze on the globe

  option - strangely this brings me to a screen asking me to choose the wireless network, but it does not all networks in the box. weird - this happens even with a simple bootable usb key

  option cmd R - annoys me to the world, but the world does not revolve

  T - puts me the screen of the target disk, but the disk is unreadable from another computer

  cmd S / cmd V - gives me a code screen and then freezes

  Shift - takes me to zero cross again

  C - think for awhile, but let me on an undefined gray screen

  (I need some advice on the start-up of the thumb. Pressing C should force the startup of the thumb. I did an inch bootable with el capitan. However, I am not convinced that my thumb works on a functional mac either - I just can't get a macbook functional 2009 to start the boost by pressing C, although it starts from the thumb if I press option and go through the menu. Weird.)

  Help, please. Urgent need to use the computer and access the data on it.

  Even if you have just a few ideas that would be useful.

  Can I assume that you have a 2009 MBP?

  You have your data backed up?

  Have you tried SMC and NVRAM resets?

  https://support.Apple.com/en-us/HT201295

  https://support.Apple.com/en-us/HT204063

  Have you tried a secure boot?

  https://support.Apple.com/en-us/HT201262

  Take our installation disc and use the one with the Apple Hardware Test instructions on it and run the original test.

  Note that an error free AHT is inconclusive.

  Ciao

• Applet does not work with Tomcat - please help!

  Hello!
  
  I have a problem with an applet running in the Eclipse IDE, using J2EE and a dynamic Web project and a Tomcat server.
  The directory structure is:
  
  ProjectName
  -Java-> PackageName-> AppletName.java resources
  -built - > Categories-> PackageName-> AppletName.class
  -WebContent-> index.html
  
  In my index.html page, I put this code:
  
  < code = "applet PackageName.AppletName" width = "500" height = "200" > < / applet > "
  
  If I run this cmdlet as a simple Applet Java, it works.
  
  But if this running on the server, my browser does not show me anything. I have try several possibilities, but it does not work. I have to do some configurations on my Tomcat or I wrote something wrong about my code index.hml or my AppletName it is not a simple java class?
  
  Thank you for your time!
  Adina

  Switch from AppletName.class to WebContent/PackageName/AppletName.class

• URL does not work when published, Please HELP!

  Hello world

  I have a problem:

  I added 2 URLs to my project using AS3 when I test the movie URL work, but when I open the swf file in the browser, it does not work.

  Is it because I didn't download the project on the server? or there is something wrong with the code?

  It's the I have the code I used for my URL:

  GamLink1_mc.addEventListener (MouseEvent.CLICK, URLC);
  GamLink2_mc.addEventListener (MouseEvent.CLICK, URLC);

  GamLink1_mc.buttonMode = true;
  GamLink1_mc.useHandCursor = true;

  GamLink2_mc.buttonMode = true;
  GamLink2_mc.useHandCursor = true;

  function navigateURL (url: String): void{}
  var urlCont:URLRequest = new URLRequest (url);
  navigateToURL (urlCont);
  }

  function URLC(event:MouseEvent):void {}

  {Switch (Event.Target.Name)}

  case 'GamLink1_mc ':
  navigateURL ("http://cso.iahgames.com/site/index.aspx");
  break;

  case 'GamLink2_mc ':
  navigateURL ("http://world.needforspeed.com/");
  break;
  }
  }

  Help would be appreciated.

  test online or allow local files access the internet sandbox: http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04.htm l

• First pro cc 2014 just stop suddenly and now does not open my project please help...

  I am trying to open a project file which stop just abruptly--"a serious error has occurred" and now my project will not open.  I have no idea what again other than completely!  Multi mix of cam with camera on 1 and 15 minutes of video - in the hope that my work is not lost forever.

  Access your backup project file.

• Updates to Windows does not and Administrator error Message.

  I had a problem with my windows updates.  It won't work and I get a message that reads: administrator defined strategy than refusing you the right to perform this action.  I am the owner of this computor.  However, he belonged to a leasing company before I buy it.  I created the property with my computer manufacturer.  What should I do?

  Hi Ann K.

  Step: We can try to activate the default Administrator profile.

  http://support.Microsoft.com/default.aspx/KB/555910

  Step 2: Now fix your corrupted user profile

  You will need to create a new profile and then copy the files from the existing to the new profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Now connect to your new profile and check if everything is working properly.

  NOTE: Disable the default Administrator account again. Follow the steps in the Article and on this line at the command prompt, type net user administrator / active: No.and then press ENTER. (change the Yes by not)

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• DVD player does not recognize disk ERROR "Please insert a disc into drive F".

  Any disk I put in DVD Player my cell phone, he won't play. If I go to the file in Windows Explorer and click on DVD RW drive (f :)), it ejects all that is currently in the player, saying: "Please insert a disc into drive F:." My computer is a Lenovo 4334 of model and model number HuronRiver_CRB. It runs on Windows 7. Can anyone help?

  Try: https://support2.microsoft.com/mats/cd_dvd_drive_problems/en-us

• Downgrade of Z10 10.3.3 to 10.3.2 blackBerry does not... Please help

  Dear all,

  I installed OS 10.3.3.746 on z10 and want to go back to 10.3.2 or any other version. I tried several files of ADF, but none worked. When the installation ends and begins it devices, it stops at "Blackberry"... I tried to reload the OS vi BB link too, but it stops with known error... I have urgent need to please. Appreciate any help

  Thanks 1million

  Hello

  Research before you jump forward with things, is very important. Everything we read is that this OS dev version (which, btw, is paralyzed anyway... it was never had the intention of anyone "daily driver" peripheral) includes the same block which started in 10.3.2. Namely, you cannot fall back to something prior. Once you move to 10.3.2, you can't go backwards 10.3.1 or earlier. Similarly, once you move to 10.3.3, you cannot go back to 10.3.2 or earlier.

  So, your only choice is to re - install 10.3.3 and soft with however the device is paralyzed until the official release of a fully functioning OS 10.3.3 released. There is no alternative.

  Good luck!

• Country of Smartphones blackBerry and other issue.please help

  Hi my name is Khan
  I use a Blackberry Bold9000

  I'm having a lot of problems in my phone

  (1) I can't use appworld because my country is not supported. Why and how I do supported

  (2) it's always when I download app Twitter + facebook app. I get an error massage. Service plan is not supported. Contact your service provider.
  My ISP is "Mobily"... I contacted them they said melon time, we provide a complete service plan + I checked all my sound all set to update versions

  Please, we are the most people who use black berries in the Middle East

  and you put your desktop in the Middle East to the Lebanon

  We need to be heard, I really love RIM, but I need recognition.

  Hello and welcome to the Forums!

  If you're hoping that RIM will see your message - these forums are a chain of support to users, not a conduct of user-to-RIM. Therefore, it is unlikely they will see what you wrote. However, if you have specific and constructive ideas for them, I heard they accept this by e-mail to [email protected].

  be_smile wrote:

  (1) I can't use appworld because my country is not supported. Why and how I do supported

  Understand that RIM has no unilateral control over the availability of AppWorld. On the contrary, a triad of entities must agree - RIM, wireless service provider, and Government. As the main entity to profit in this triad, I've always suspected that the RIM is not one that could hinder the process. So, what you can do, is put pressure on your company and/or your Government to allow the AppWorld in your country.

  In addition, you should know that AppWorld is simply a portal, vending apps developed mainly by others. Therefore, it is not your exclusive supply source - there are others that you can try (e.g., Handango, Handmark, BPlay, GetJAR and Mobihand). I found that there are very few applications that is exclusive to AppWorld. You can see the online catalogue and then look for other sources of supply, including quite often on the developer website.

  be_smile wrote:

  (2) it's always when I download app Twitter + facebook app. I get an error massage. Service plan is not supported. Contact your service provider.
  My ISP is "Mobily"... I contacted them they said melon time, we provide a complete service plan + I checked all my sound all set to update versions

  Your service provider is responsible for providing all services and support for you. No one else has no control. They need to solve this problem. You have the ultimate leverage - you pay for services they don't deliver. They have the ability (in fact, the responsibility) to escalate your case at RIM for extra support if necessary. You have no free method to request support from the RIM as the escalation of your provider.

  Good luck and let us know!

• Desktop elite keyboard 1011 Microsoft Wireless model does not install the drivers please help

  well, I have a model of elite microsoft 1011 wireless keyboard and a wireless microsoft 1012 receiver model (it's a combo with a mouse, but is he missing)
  My problem is that I installed windows 7 x 86(32 bit) and I tried to plug right in my keyboard wireless via reciever.at first the 3 LEDS that have notified when keys locking are activated cycle first.
  After that he was known as 3 times it stopped.i unplugged the receiver thenreplugged in.this timw there no same cycle.
  I opened Device Manager to check the drivers.it been regestering unknown so I googled the names and found the microsoft drivers (don't know if it's maybe for a newer version on or not, he had the series in the installation) I installed them I clicked on one that says Microsoft elite wireless keyboard then install.after knowing it was installed I opened dev.manager and check to see if it helped it was always regestered as unknown so I restarted my computer and check again, but the same
  any help would be useful
  If I remember correctly he did for win98/xp
  Oh, this is for her tech data sheets
  Sorry if the question is already asked that I tried to be as straight as I could be
  http://docs.google.com/viewer?a=v&q=cache:pXBz4ER-bMwJ:download.microsoft.com/download/3/b/e/3beedec5-0835-42b4-bfdf-0084f6d6d530/TDS_WirelessOpticalDesktopElite_0502A.pdf+microsft+desktop+wireless+keyboard+1011&hl=en&gl=us&pid=bl&srcid=ADGEESiy7Tv5ivEWg0Bq76vRRMyn28r2TtQFEk-z0Fzsw6R3zP8KsdqKh4mIxpYdE2tNp3EJ2QE4Fz1BwySrv_czKk_0fCB-ES0zHUaVjO1unTtsjoUdq56qWeT_iuGS0FP7neq_JHXh&sig=AHIEtbQUklfEshI_IP9Z_3X-A9uGsTXYsw
  If you have yahoo messenger installed on your computer send me a message if you have anything I can try this * address email is removed from the privacy *.

  The 7.10.344.0 driver version is the one offered to the keyboard itself.

  For office all the proposed version is ITPx86_1033_7.00.260.0.exe.

  You have a line of brief and clear view between the dongle and the keyboard? The signal may be weak or the dongle damaged the transfer to the new system.

• Lightroom 2.5 on Windows 7 does not display the previews - please help

  I converted just my system of Windows Vista (32 bit) to Windows 7 (32 bit).  I have 2 monitors.  Normally, the first monitor shows all my pictures in a grid view; However the grid displays now no images but the data file is still there... When you place the cursor on the spot where a photo should be there is no picture displayed but the bottom of the screen shows the name of the file and the path and the note that I attributed the photos (that is to say 5 stars) watch in normal position.

  I uninstalled Lightroom 2.5 and reinstalled it but the problem remains.

  Help, please.

  IIRC, it's a question of monitor profile. See if you can change the monitor to something like sRGB profile - or whatever it is at the moment. Moreover, running in mirror mode-is it that heals?

• Micro does not work after recovery please help

  After a virus in my computer, I did the recovery on my pc my dynamic microphone no longer works but the virus b4 it worked I tried everything to fix it and this is not possible and I just tested the microphone on my friends pc works very well I don't know where is the problem if someone can help im using windows xp...

  Did you try to increase the volume of the microphone you?

  Usually, HP recovery work out any software problem, have you chosen factory installation option?

  If the installation of the factory can solve your problem with the microphone, you may have a hardware problem.