Error 404 on netbeans IDE 7.3

Similar Questions

• The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  I am at a loss.  I've set up a root certification authority to sign all servers in my workspace of Horizon, SAML is in the Green and after a lot of reading when troubleshooting also synchronized on all my ESXi hosts and guests.

  Basically, what I did is the following:

  Set up the connection to the Server VMware View Horizon 5.2 - created different pools and can connect via the customer different platform. (a few times to eliminate any possible configuration errors along the way)

  Configuration of VMware View Horizon Workspace 1.0 (a few times now) with self-signed and CA signed certs.  My workspace appears fine, the synchronization of files, apps work, and view pools appear.  When I try to launch your desktop from inside the Horizon workspace I get this error:

  The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  Now I think that I followed it down to something to do with SAML connection - which, to my understanding, archery chips between workspace and view.  On the login server, I see it in the Windows event log:

  BROKER_USER_AUTHFAILED_SAML_ACCESS_REQUIRED

  SAML access required but not tempted by customer

  Attributes:

  Source = com. VMware.VDI.Broker.filters.SamlAuthFilter

  Time = MON may 20 16:06:41 MDT 2013

  Gravity = AUDIT_FAIL

  Node = ViewConnection.access360.ca

  Module = broker

  Recognized = true

  Something is not crossing to allow me to access my office view since the workspace of Horizon.  If I remove the requirement of SAML on the login server see, when I try to connect to a desktop computer from the view connection server I get a promotion for and can I get my IDs & field and have full access with reviews, as well as blast HTML - just cannot get there with Horizon Workspace.  There must be something that I am missing with SAML...

  As I said, I'm at a loss here on what does not work between the Horizon workspace and the connection of SAML for display to connect to the server.  There is no server security, server transfer, and firewalls is all off, so I don't think it's a network problem.  Simple as possible.  The Windows Journal event displays the login displays server error is: access required but not attempted by client SAML.  I have all my servers synchronized after a few seconds - so I don't think that documented the TIME Horizon workspace synchronization time sensitivity is responsible here.  I am Pack overnight, but will do exactly the same thing with a client of tomorrow - hopefully without the same result!

  Any ideas?

  A

  So I re-deployed the VAPP (again!) very attentive as I went.  As usual, the initial database installation failed because I entered my domain FULL of the gateway name, so it does not match.  After useful messages already there for this (Workspace install fails with error creating the user admin) I used the wizardssl.hzn of connfigurator - going to recreate a rootca to the environment based on my FULL domain instead of the bridge - going and then let it grow all for the other vApps.  I then connected to each and pulled down my private rootca and ran c_rehash, etc. (another useful message!- adding MS signed Certs to Horizon Workspace & laquo;) Carlos & #039; Corner) I actually use my background to UNIX and openssl to be my own private CA and sign all of my certificates.  I created the SAN cert and added to the SSL configuration on the Configurator - going and connector - going.  Oddly enough, both of these server do not appear to be accepting SAN cert that includes their ENTIRE domain, but that's for another day... My Horizon Workspace FQDN does show as being approved by installed RootCA private (which does not have other DNS names for the service - going, the Configurator - goes, the data - will and the connector - will, but as I have already said--a battle for another day) so it's a good thing.  I joined my workspace to my domain name - well!  Activated would be pools seen in the Configurator - goes - sync - good.  CRT for the my display login server has accepted and implemented the SAML trust.  Still good.  Sync in my opinion users group who already had a couple of linked clone pools allowed to do.  Good.  Connected to the FQDN of my workspace and clicked on computers - seen my 3 pools.  Clicked on one and after a few seconds, launched in a new window of the explosion.  Success!  I disconnected and connected on a different machine, and something that I saw before, but doesn't have a lot of attention to was the connector - will put 'use windows authentication', I couldn't understand why every time I sailed on my Horizon workspace a no vmware window opens asking access my FQDN:443 with a user and pass.  It is this setting - duh.  I'm not sure yet that gives me, so it's off for now.

  Thanks for all the input: it's good to know that there are others with some of the same questions.  It's still v1.0, it is related to some of these pitfalls.  It is capricious with derived from same time less than 10 seconds seems to have a negative impact.  Had to ensure my ESXi servers were strong (never worried a lot in the past with MS AD being quite tolerant with small derivatives) I tired my vApps affecting a NTP, but they seemed like being left to the default of synchronization to the ESXi host.  See how than pans.  CERT is somewhat capricious depending on your deployment.  Of course the connector - will and the Configurator - must be signed by a CA that they are internal, but always be nice to then have signed internal...

  Now, I'm on ThinApps for desktops as well as the web interface integration.

  I bumped my head against the wall with my first configuration of Citrix XA and XD (before having VDI in a box!) and it was the best way to learn.

  I don't know that I grave along that I finished my PoC, but I'm very happy with today's results.  I still plan on the comparison of my logs successful with the logs I have pulled my former deployment TIME and see what it was that it was broken.  I think it was that wanted me a PTR record to my domain FULL DNS MS. name  I think I just had the direct search for the original bridge - will and FULL, but only a setback for the gateway domain - name.  Would explain why I was never able to connect to the gateway to access your desktop.  Oops.

  A

• Error 404 - not found listenerConfigure but not with the apex page

  Hello
  
  I just installed the listener APEX 2.0.1 as a stand-alone installation.
  I don't use EPG.
  
  I get the error 404 - Not Found When I pass in my browser the url:
  
  http:// < My Server >: 7777/apex/listenerConfigure
  
  but I have the correct application page when I get home:
  
  http:// < My Server >: 7777/apex
  
  Does anyone have an idea about goes wrong with that?
  
  Kind regards.

  Hello

  http:// : 7777/apex/listenerConfigure

  This URL does not exist for APEX listener 2.0.1 because the web configuration interface has been removed with 2.0. There was improvements to the command line interface to configure the listener of the APEX and there is a new interface, you can use with SQL Developer since 3.2 (current version 3.2.2 is recommended).

  Always take a glance the documentation that matches the version of software you are using. In your case, it would be the [url http://docs.oracle.com/cd/E37099_01/doc/doc.20/e25066/toc.htm]APEX earphone 2 Installation and Configuration Guide.

  -Udo

• Derby in Netbeans IDE database connectivity problem

  I use the latest version of Netbeans IDE
  I've already put the variable JAVA_HOME and DERBY_HOME, as well as path variables.
  I am trying to connect to the database in network Mode
  by using the following code
  
  ......
  Try
  {
  Class.forName ("org.apache.derby.jdbc.ClientDriver");
  }
  catch (ClassNotFoundException System.Exception)
  {
  exception.printStackTrace ();
  }
  .....
  
  but it gives the error of execution that "failed to load the driver.
  Please help me get through this

  Try adding the following to your class:

  Import org.apache.derby.jdbc.ClientDriver;

  If he produces an error, your pilot *.jar file is not in the classpath.

• Error 404 - not found - after the installation of Essbase 11.1.2.2

  Hello
  
  I encountered error.
  
  I have a box of PMC 11.1.2.2 using Windows 2008. After the installation of Foundation and configure it, there is no problem at all. I can open workspace and interop as well.
  However, I added Essbase, installation and configuration of it. But after installing Essbase, I managed to turn it back on Hyperion Sharing Service, it did not work.
  
  The error that says:
  
  Error 404 - not found
  RFC 2068 Hypertext Transfer Protocol--HTTP / 1.1:
  10.4.5 404 not found
  Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent.
  
  If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
  
  
  What I did is also a reconfiguration of shared services, Essbase. But no luck at all.
  Does anyone have any idea, please advise. Thank you.

  Sometimes, this error may be because the data source details are incorrect that I showed you yesterday in WebLogic.
  I don't know how you managed to cause questions to the Foundation after the addition of essbase as I do not have the process that you did.

  If I go to WebLogic and change the user to the EPMSystemRegistry data source and then start the server EMP service the same errors are generated.

  <15-Jun-2012 08:32:58="" o'clock="" bst="">
  ".>

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Error 404 with FM11 and Documentum

  When trying to connect to a server, Documentum 6.5 via the integration of Documentum in FM11, I get the error:

  The remote server returned an error: (404) not found.

  If I change the URL of the server, the error becomes a 502 gateway error, so it does not seem to connect. I connected successfully using the same information (server, port, user/password and repository name) through the integration of DFS of oxygen and which works very well against the same server and DFS client even.

  Any ideas or I can do to see more details on what is happening I can take the problem to my Documentum administrator?

  Thank you

  Brian

  The solution then there is for someone else who could run through it. I don't know if it is a configuration issue with our server or a problem in Framemaker or something between the two, but running a packet sniffer I found that Framemaker was trying to access:

  : http://application-tier server: port/base/SchemaService

  The use of oxygen (which worked):

  : http://application-tier server: port/services/base/SchemaService

  So the solution for us was to add /services/ field in Framemaker Server as follows:

  : http://application-tier server: port/services /.

  I hope this will help someone save some time one day.

  Brian

• Is is possible to connect Netbean IDE to the Oracle XE database.

  Is possible to connect Netbean IDE to the Oracle XE database uses drivers provided with Netbean network.
  
  I m giving continuation of input to Netbean parameter.
  
  Data entry mode: entry field
  Driver name: JAVA DB (Network)
  Host: light-LMO
  Port: 1521
  Database: XE
  Username:lightweight
  Password: xxxxx
  
  
  When tried connecting the Oracle XE using netbean I got following error.
  
  
  ubable to add a connection. Could not establish a connection to the jdbc:derby://lightweight-ovm:1521 / XE
  using org.apache.derby.jdbc.ClientDriver (insufficient during the reading of the network - wait a minimum)
  6 bland and received only 1 byrtes. the connection has been lost.
  
  
  However, I can able to connect in the jsp pages using the following connection string.
  
  Class.forName ("oracle.jdbc.driver.OracleDriver");
  Conn = DriverManager.getConnection ("jdbc:oracle:thin:@localhost:1521:XE", "light", "oracle");
  
  
  What's not here?

  Please post this in

  Database connectivity - Java Database Connectivity (JDBC) Forums...

  http://forums.Sun.com/forum.jspa?forumid=48&start=0

  Concerning
  Rajesh

• Silverlight could not install on MAC with the error "404 error server...". »

  I uninstalled silverlight and emptied the trash, but when I go to install and open it for all my downloads, I get the 404 code. any help would be appreciated. Thank you

  (IE Version unknown)

  Original title: I can not install silverlight to work on a mac. All I get is file server error 404. any help?

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro on the Silverlight Forum public.

  Please post your question in the Silverlight Forum.

  http://forums.Silverlight.NET/

  Kind regards.

• Error 404 on google chrome, I tried google chrome help still received the error 404

  Windows x.p has recently developed a problem on the error google chrome 404, tried to access it using google chrome, but always get error 404.

  Your hosts file has been hijacked

  You can check here
  http://en.kioskea.NET/FAQ/15289-Google-nginx-404-error

  It worked for me

• Error 404,8 PHP/IIS 7 Windows Vista

  I installed PHP on windows vista with IIS 7 and got the error 404,8'

  Module	RequestFilteringModule
  Notification	BeginRequest
  Handler	StaticFile
  Error code	0x00000000

  Requested URL	http://localhost:80/phpapps/Web.config
  Physical path	C:\inetpub\wwwroot\phpapps\web.config
  Logon method	Not yet determined
  User logon	Not yet determined

  • Request filtering is configured for the Web server, and it contains a section of hiddenSegments that allows the administrator of the server denied access to specific directories.
  • Check the settings of configuration/system.webServer/security/requestFiltering/hiddenSegments in the applicationhost.config or web.config file.

  can u please help.

  Hello

  The issue of Windows 7, you have posted, suitable for the IT Pro TechNet public. Please ask your question in the TechNet Windows 2008R2 forum. Please post your question in the below mentioned link:

  http://social.technet.Microsoft.com/forums/en/windowsserver2008r2webtechnologies/threads

  Kind regards

  Gaurav Prakash - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• [SOLVED] Error 404 Google + card Tunnel Teredo Tunneling Pseudo-Interface disabled in NetBIOS over TCP/IP

  I realize that it is a long title.  It could be useful describe my problem.

  Recently, I downloaded something (not sure if I can't talk about website) and with download received 4 bad files found by Malwarebytes named: PUP. OfferBundle and PUP. ToolbarDownload.  These 4 files were quarantined and then removed, but this does not solve my problem.  I ran Microsoft and other spyware, but nothing more has been discovered.

  I have Norton Internet Security, which extends constantly and I always have these terrible files.

  I can not access Google search engine.  I get this message: error 404 (not FOUND)! 1

  The address bar reads: cgi-bin/redirect.ha.  I have another computer and am able to access Google since the router same use so I know there are still a few malware rootkit on my computer which may be connected to the Teredo Tunneling adapter, I don't understand.

  I'm not sure how to solve this problem.  I don't know where watch, but ran many scans of data collection.  Here is a part of a single test showing wireless and LAN configurations:

  Windows IP configuration

  Name of the host...: StrikingEagle-HP

  Primary Dns suffix...:

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  ... DNS suffix search list: att.net

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft Virtual WiFi Miniport adapt

  Physical address.... : 20-10-7A-1C-AF-7D

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. : att.net

  Description...: Realtek RTL8188CE 802.11b/g/n WiFi adapt

  Physical address.... : 20-10-7A-1C-AF-7D

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  IPv6 address: 2602:306:cdb8:5300:b5fc:b411:6df0:e722 (Preferred)

  Temporary IPv6 address...: 2602:306:cdb8:5300:b9d4:2772:d89a:3a5f (Preferred)

  Address IPv6 local link...: fe80::b5fc:b411:6df0:e722% 13 (Preferred)

  IPv4 address...: 192.168.1.73 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: Sunday, April 22, 2012 23:29:35

  End of the lease...: Monday, April 23, 2012 23:29:34

  ... Default gateway. : fe80::42b7:f3ff:fec9:a2e0% 13

  192.168.1.254

  DHCP server...: 192.168.1.254

  DHCPv6 IOOKING...: 320868474

  DHCPv6 DUID customer...: 00-01-00-01-16-A6-EF-8E-2C-41-38-5C-76-B6

  DNS servers...: 192.168.1.254

  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : att.net

  Description...: Realtek PCIe GBE Family Controller

  Physical address.... : 2C-41-38-5C-76-B6

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  IPv6 address: 2602:306:cdb8:5300:584d:2ddf:6 a 08: f6a7 (Preferred)

  Temporary IPv6 address...: 2602:306:cdb8:5300:575:56e9:298d:9097 (Preferred)

  Address IPv6 local link...: fe80::584d:2ddf:6 a 08: f6a7% 11 (Preferred)

  IPv4 address: 192.168.1.71 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: Sunday, April 22, 2012 23:29:32

  End of the lease...: Monday, April 23, 2012 23:29:32

  ... Default gateway. : fe80::42b7:f3ff:fec9:a2e0% 11

  192.168.1.254

  DHCP server...: 192.168.1.254

  DHCPv6 IOOKING...: 237781304

  DHCPv6 DUID customer...: 00-01-00-01-16-A6-EF-8E-2C-41-38-5C-76-B6

  DNS servers...: 192.168.1.254

  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {38655146-6231-4777-AB1C-2DC12E0017FD}:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft ISATAP adapter

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 9:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft 6to4 card

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Tunnel adapter ISATAP.att.NET:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. : att.net

  ... Description: Adapter Microsoft ISATAP #2

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :

  ... Description: Teredo Tunneling Pseudo-Interface

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  IPv6 address: 2001:0:4137:9e76:2413:2ee1:3f57:feb8 (Preferred)

  Address IPv6 local link...: fe80::2413:2ee1:3f57:feb8% 14 (Preferred)

  ... Default gateway. :

  NetBIOS over TCP/IP...: disabled

  Server: dsldevice.att.net

  Address: 192.168.1.254

  Name: google.com

  Address: 74.125.227.40

  74.125.227.41

  74.125.227.46

  74.125.227.32

  74.125.227.33

  74.125.227.34

  74.125.227.35

  74.125.227.36

  74.125.227.37

  74.125.227.38

  74.125.227.39

  Please note the last entry.  DHCP is not enabled.  NetBIOS over TCP/IP is disabled.  Now, it's for the Tunnel Teredo Tunneling Pseudo-Interface AND Google map is registered immediately thereafter with a list of IP addresses.

  Would be - why I can't access Google?  How can I fix it?  How can I activate this card Tunnel?  I want to do this?  I did a ping for the Tunnel of the card test and it seemed to work OK.  How do I know if card Tunnel is really on?   Why is the Tcpip BIOS

  people with disabilities in the last list of IP and not on others?  Why are all those Google IP addresses listed?

  Any help is greatly appreciated.  I'm very stuck.  Thank you.

  Edit = Edit

  has run another scan: MicrosoftSecurity Agent (I think) that produced a VERY long report, CBS.  There are a lot of mistakes in this report, and I don't know which ones were repaired my Microsoft or if errors are related to my problem.  Here are some of the errors.  All t errors are repeated throughout the report. I hope this info is helpful:

  2012-04-11 07:29:06, CBS Session info: 30218206_2951615106 initialized by the WindowsUpdateAgent client.

  2012-04-11 07:29:06, missing version of the CBS identity information. [HRESULT = 0 X 80070057 - E_INVALIDARG]

  2012-04-11 07:29:06, error CBS has no identity shred: Microsoft-Windows-Internet Explorer-LanguagePack [HRESULT =

  0 X 80070057 - E_INVALIDARG]

  2012-04-11 07:29:06, CBS Session info: 30218206_2951615106 initialized by the WindowsUpdateAgent client.

  2012-04-11 07:29:06, missing version of the CBS identity information. [HRESULT = 0 X 80070057 - E_INVALIDARG]

  2012-04-11 07:29:06, error CBS has no identity shred: Microsoft-Windows-Internet Explorer-LanguagePack [HRESULT =

  0 X 80070057 - E_INVALIDARG]

  2012-04-11 07:29:07, CBS Session info: 30218206_2956451109 initialized by the WindowsUpdateAgent client.

  2012-04-11 07:29:07, info CBS doesn't have the package opened internally. [HRESULT = 0X800F0805 - CBS_E_INVALID_PACKAGE]

  2012-04-11 11:20:30, CBS M² info: could not start the download with pattern file: C:\Windows\servicing\sqm\*_std.sqm, flags: 0 x 2 [HRESULT = 0 x E_FAIL 80004005]

  Hello
   
   
  We are pleased to know that the problem is solved.
  We know in the future if you have problems with Microsoft Windows.

• Samples of the RIM in NetBeans IDE

  Hello

  I want to know how to import samples of RIM in NetBeans IDE

  I m using NetBeans IDE 6.5 and have implemented a single what path is defined on RIM

  so I can use NetBeans IDE to develop app RIM

  but want to compile and run the examples of RIM of NetBeans

  How can I do this?

  As much as I know there not netbeans plugin like eclipse plugin JDE.

  There is therefore no import mechanism.

  The only way - create netbeans projects and the transfer of the source of samples of the RIM and project files in folders of NB project.

• Error 404 for blackBerry Smartphones

  Hi again. My BB 9700 OS 6 application Center shows no candidate on the list of applications. When I try to update I get error 404.txt may I know what it means and what could be the problem and the solution.

  Hello and welcome

  404 error on web average which can not find the page, out of here, you have two points

  1. you don't have access to the WEB (internet)

  2 asked (internet) WEB page deleted or temporary unavailable.

• Bing dynamic themes does not. Error 404 on themeserver?

  I went to download the Bing dynamic theme and a few other dynamic themes, but when I download them and then apply them and click to download pictures it stays black, no images. I searched on the internet and read a page on a problem with CCleaner, I do not have it, but I tried it anyway.

  I deleted the themes, deleted the files rss en empty file attachment. When I re-download the theme and choose Yes to download attached files, the RSS file gets created OK, enclose file is made but remains empty.

  When I change the theme file, I find the link for the RSS feed with images.
  http://themeserver.Microsoft.com/default.aspx?p=Bing&c=desktop&m=en-us

  However when I open it I get a 404 error, so it seems normal to me that images don't get downloaded because the themeserver is broken at the moment. Or is it just me that gets this error 404?  Thanks for your reply.

  PS: I got you already bing is dynamic theme, the images show very well because you already have. Try to download another one dynamic, you haven't tried before. They all remain black for me.

  Server error

  FIX POSSIBLE!

  First delete all dynamic themes RSS in customization! To remove, choose a theme of RSS and select then go back to the RSS one and right click, select Remove. Repeat this entire step for all themes RSS to ensure that all are removed.

  Now open IE10 (maybe IE9 too?) in Windows 8 (maybe Windows 7 too?), go to Favorites (star icon) and click on RSS. Scroll until you find all the foods that are http://themeserver.microsoft.com/... and right click and select Remove. Return to personalization and dynamic just redownload 1 RSS feed, then return to streams in Internet Explorer and select the RSS theme and right click on it, go to properties and to the RSS feeds from the Properties Windows that opens should show the RSS address, etc.. Make sure that under update schedule, and select the first point (day of the default use Default annexe1), then just to the right click on the frame and a new popup window will appear. Now in a set-top box, make sure the checkbox is in there and select 1 day! Close all popup windows now and go to Favorites (Star) and click on RSS, right-click on the thread of theme and select Refresh. Now go back to the customization and click twice on the 1 dynamic RSS feed that you selected and see if it downloads photos. There a minute. If it is not the case, go back to Favorites (that star new :)) and select the flow and find the flow theme and do the update ALL this time and see if it works.) If not, then I did not help: (...) If so then repeat all of the steps above for another theme RSS... don't forget to choose 1 topic, no more... then do the steps. If the second theme RSS works, then repeat the steps for another topic RSS, etc.

  IMPORTANT! If you use CCleaner or other cleansers (same IE itself under options to remove the contents of the temp folder) clean the windows temp folder, which causes everything you have done to mess up again, because windows puts photos RSS theme in the temp folder!

  I am currently using CCleaner and that's why RSS dynamic themes don't show photos! I am currently looking on the net a way to exclude CCleaner to clean the particular location of the photos. The photos are stored in a super hidden folder. The only way to access this folder is:

  1. open Windows Explorer.

  2 copy the following path:

  %UserProfile%\AppData\Local\Microsoft\Windows\Temporary Internet Files\Enclosure

  3. paste this into the address bar and press ENTER.

  4. when the folder opens, you will see a folder with a long alphanumeric number. Double-click this file to open it.

  The images that have been uploaded will be in this folder.

  If some knows of a way to keep CCleaner to remove that hidden folder "Pregnant" Please let me know! I can't enter CCleaner manually exclude a folder to work... :(

  In any case, I hope this helps. Please answer!

• NetBeans IDE 8 Edition version works in this course?

  Can you install NetBeans 8 version edition for this course, or we must always use the beta version?

  Any update of documentation using NetBeans IDE 8 in this MOOC Embedded Java?

  Thank you very much.

  Matthew Ho

  Hi Matthew -.

  Yes, we'll use NetBeans 8 (the current version) and Java SE 8 (JDK 1.8.0).

  Please do not use NetBeans 8 beta - the beta version is missing a few items needed for Java ME embedded 8.

  Materials in 1 week will cover installation of NetBeans, the plugins and Java ME SDK, as well as the Raspberry Pi for Java ME 8 Embedded configuration.

  Just a few more days!

  Tom