Error 52: Suddenly Windows 7 can not detect my cd 2 drives more.

Similar Questions

• Windows 7 does not detect multiple external hard drives

  I recently bought a HP Pavilion laptop to 7 Home Premium. I have two 500 GB external hard drives. When I connect them individually to the system, they are recognized and I can copy files to and from these External Drives. But when I try to connect both at the same time, Windows 7 does not detect the drive I connect then. Any help is greatly appreciated.

  If the disks are powered by the USB bus and do not have their own external power supply the problem is that the laptop does not provide sufficient USB power to control both.

  The USB specification, is that each port should provide 500mA at 5V. To keep their batteries, laptops usually provide 500mA to share between all available ports. If you need to use several USB devices with significant power, you must either externally powered USB hub or to provide the devices with their own power supply to cutting.

• Creating Windows DVD - can not detect the DVD burner.

  When I start Windows DVD Maker, my DVD drive on my Lenovo 64 bits Y460 can not be detected. When I click the selector drop down menu on the upper right corner drive, a blank is displayed. When I try to burn, the program says that a DVD burner can not be found, sign in, and then install etc... How can I fix it?

  You have a 3G modem or another attached flash drive? My Huawei modem was somehow interfering with Windows Media Center/DVD Maker detect my DVD burner. As soon as I unplugged the problem disappeared. If I reconnected it during the burn process, it does not immediately!

• Windows 7 does not detect my external hard drive

  Window 7 is able to detect my external hard drive under devices and printers, it is able to detect the hard drive, and there is no problem for her.  but only shows no not my external hard drive under my computer icon so I can't drag files

  
  How can I find the hard drive and put the files?
  
  Thank you

  OK follow the instructions;

  • Click the windows icon
  • Right click on computer > then click on scabies
  • on the left, under storage, click Disk Management

  now the hard tip. You must identify which is your external hard drive. It should say something like disc 1 - online (if you have other removable things such as memory card readers may be something like disk5). DO NOT TOUCH DISK 0 (c) because it is your operating system and nothing change may / will kill the system.

  It doesn't have a letter from dirve allocated on the external drive then left and right click then click on change drive letter and paths.

  Assign a new letter perhaps something like L: as who should enter into conflict with what it is then ok the windows... it should now appear.

  Yet once just to reiterate do not assign c: or touch disk 0. you have been warned.

  Here is a link with pretty pictures to help you a bit

  The most difficult part is to find what is your hard drive. Good luck. If you're worried you can take a screenshot of the management of the computer and upload it to your skydrive. We would advise you that it is.

  Hope that helps...

  Free Support Tools

• Pavilion Sleekbook: install windows 10 - can not detect network

  Help!

  I upgraded my computer windows 10 laptop and it cannot detect a network.   The network adapters that appear in the Device Manager - controller Realtek PCI FE and Qualcomm-Atheros 802.11 AR9485 wifi adapter but I can't see any network.   I tried to install several drivers for Atheros without result.   I went back to 8.1, and its market not now - someone has a solution for this?

  HP Pavilion Sleekbook 14-b017cl

  Ok. I managed to solve this problem in this article, http://www.ibtimes.co.uk/how-fix-no-wi-fi-available-issue-after-windows-10-upgrade-1513654

  I used RegEdit instead of the command in the article.

• error code 0x800705b4 windows defender can not turn on because the time-out period expired?

  How to install windows defender without time-out period ending?

  How to install windows defender without time-out period ending?

  Have u installed another anti-virus product? So uninstall it

  List of product anti-malware removal tools
  Windows Defender on Windows 8 - Introduction and frequently asked Questions
  http://answers.Microsoft.com/en-us/protect/Forum/protect_defender-protect_start/Windows-Defender-error-code-0x800705B4/83370876-27Ce-41E9-882e-f78a7f8ef911
  Rarely this may be evanescent and such situation just reboot peut remove...
   
  If the problem continues post here ===> >http://answers.microsoft.com/en-us/protect/forum/protect_defender?tab=Threads

  Edited:updated... links

• laptop Envy 17 17-j034ca: can not detect the usb flash drives

  Hi, I recently installed windows 7 64 bit on my computer laptop envy 17 17-j034ca. Then, I managed to install all the drivers but it still doesn't detect usb flash drives and I tried to install from the web site of HP and my config but it still does not work

  Please help me

  

  It's ok my sound suddenly computer detects the flash drives normally

• Satellite L300 can not detect the CD/DVD drive

  Hi all!!

  I hope someone can help! My laptop can't find my CD/DVD-rom device.
  I haven't done anything with it, have not installed all the software and Device Manger shows:
  The device cannot be charged - when I want to update the driver - check systems and the driver is the most recent?

  When I de - activate and it the system will find the same driver. But no CD DVD device.
  TSST corp CDDVDW TS-L633A

  What can I do to get access to this new?
  Thank you!

  Hello

  What operating system do you use?
  What is the status of the optical disc drive in Device Manager?
  I assume that the drive is not displayed in windows Explorer. Can you confirm this?

• Windows 7 does not detect a network adapter driver.

  So I just did me install windows 7 since vista 64 bit and I noticed that I had no internet. I did some troubleshooting and he told me that I have no network card driver.

  
  
  How can I fix?
  
  
  He said that my Ethernet controller drivers are not installed.
  
  
  Intel (KBIBX10)
  NVIDIA Geforce GTX 260
  Intel Desktop Board DP55WG

  Hello
  First install the chipset drivers. You can find them here . After installation, restart your system and try to reinstall the lan drivers.

  How to find all the drivers for win7 on the motherboard on the Intel site?

  Enter this link. Choose here in the OS: Windows7, 64-bit-> drivers and below there are all the latest drivers:

  Audio , Lan , Chipset , RAID and CIR .

  If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).

  If your issue is resolved, please indicate then your wire is with solution.

• Windows 7 can not be installed on this drive

  I am installing Windows 7 from a USB on a new computer. The installation starts correctly. He asks me what language to use and then asks if I want to do a custom (fresh) installation, which I do. Then a screen comes up asking me "where do you want to install windows? My hard drive (disk 0 Partition 1) is an option (there 465,7 GB free). When I click on it, however, the message appears: "Unable to install Windows on disk 0 Partition 1." When I click on details, the message: "windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Make sure that the drive controller is enabled in the computer's BIOS menu.

  Since this is a brand new computer, I've been advised to click on the format button. But when I click on the format button at the bottom of the window, I see the message: "Setup could not create a new partition or system to locate a system partition. See logs of installation for more information".

  I don't know how to access the installation log files.

  I don't know how to access the BIOS, but I don't know how to turn on the disk controller.

  * original title - windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Make sure that the the disk controller is enabled in the computer BIOS menu.*

  1. start from the USB device that you use to install Windows 7
  4. Select your language, click Next.
  5. click on "repair your computer".
  6. Select the operating system you want to repair.

  7. click on the command line

  8. at the command prompt, type: FORMAT C: /.

  Press enter on your keyboard

  Type y for Yes

  Press enter

  Please wait while the drive is formatted.

  Type exit to close the command prompt, and then click farm to shut down the computer.

  Proceed with the installation on the new PC. You will need to use for phone activation reactivate on the new computer:

  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.
  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Boot Camp can not detect Windows software support

  Hi guys!

  1. I have a question, I started my bootcamp and pressed the 2 first options and clicked on continue:

  http://postimg.org/image/9mly0tvjl/

  2. that's what I did to "2." step. I chose the iso file of Windows 7 Home Premium and boot camp agreed and loading all fine!

  http://postimg.org/image/tg97p5fu5/

  3 and now it was time for step 3:

  http://postimg.org/image/554gf7i3x/

  After Boot camp let me decide how many GB, I want to save for Windows... I got 500GB (half) and clicking 'Install'... but the problem is here...

  It is said that: "Boot Camp can not detect Windows supports software.." and so on.

  Where do you think the problem is? Is - this problem on the ISO file?

  I would appreciate any kind of help,

  Thank you.

  What year/model is your Mac? Please see step 11 in install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support .

• Windows does not detect my cd-rom drive in 7 edition, can't Reinstall driver, help.

  Windows does not detect my cd-rom drive in 7 edition, can't Reinstall driver, help.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Fix for CD/DVD drive missing:

  http://support.Microsoft.com/kb/982116

• Windows 7 can not activate the 0x800702c7 error code.

  Original title:

  my pc can not update bacause of an 0x800702c7 error code

  my windows 7 can not activate bacause of an 0x800702c7 error code

  What will I do?

  Hello

   
  How you try to activate Windows?
   
  Reference:
  Activate Windows 7 on this computer:
  http://Windows.Microsoft.com/en-us/Windows7/activate-Windows-7-on-this-computer
  Activate Windows 7: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/activating-Windows-7-frequently-asked-questions
   
   
  I hope this helps!

• Computer can not detect any sound cards and graphics or communication ports.

  Recently I reinstalled Windows using the CD, I had Dell, when I bought my computer. However, when I was done with the installation, I went on youtube to look at things and I realized that the sound was not working. I thought I must have forgotten to install the driver for my sound card, then when I tried to install, it says something in the sense of "error". - Impossible to find Port Com1 I looked into this a bit on google and found that it is probably disabled in my BiOS. I'm not sure what to do after that, but I hope that someone knows why my computer can not detect anything.  hate viruses

  http://support.Dell.com/support/downloads/index.aspx

  Go to Dell website > drivers and downloads Section > key in your model number > get latest XP drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Pavilion dv2500: can not detect our connection to wifi PLDTHOMEFIBR (our own connection)

  Hello community of Hp.
  
  I have a problem with my PORTABLE HP PAVILION dv2500 PC.
  
  A few months ago, everything is ok.
  
  It can detect our wifi.
  
  then yesterday I just know that it can not detect our wifi at home.
  
  I mean that my laptop can detect our neighbors wifi. but it can not detect our own wifi.

  I already perform some troubleshooting method.

  the first thing I did.
  
  is that I perform a RESET of my modem.
  
  because I think that the IP of my laptop has been block by my modem.
  
  If, after that, it's the same. It can not detect our wifi.

  second is.
  
  I reformat WINDOWS Vista x 64.
  
  but it's the same thing.
  
  It can only detect our neighbors wifi. but our is not.

  last thing I did was to change the ip address of my laptop.
  
  but it did not solve my problem either.

  pls help me solve this problem.
  
  
  
  Thank you.
  
  and God bless you all.
  
  more power for the team of hp with this site.
  
  
  
  Please send me an email or comment here if you have an idea on how to solve my problem.
  
  [Personal information]
  
  Thanks again and best regards.

  Hi @BooJimBoo,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!
  
  I stumbled upon your post on the HP laptop and wanted to help you! I looked in your question about your Hp Pavilion dv2500 Notebook and problems with the wireless connection. Try to reset the router. Wait 30 seconds before plugging and unplugging the router to make sure, it resets completely. Here is a link for troubleshooting wireless connection, if you need. Section I fell better help is the key to security is changed 3. To establish a new connection to the wireless network, return to the network sharing Center window, select set up a connection to a network.

  If the problem persists, I would change the channel on the router. Routers are able to communicate to your laptop on several different channels. You can contact your Internet provider.

  Some say that this download will help fix this Microsoft Fix it.
  
  Here is a linkto help as well.
  
  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .
  
  Thank you.