Error 619 when trying to connect to a VPN.

Similar Questions

• 0x0000046a error code when trying to connect to a printer on a network and share

  I can't connect to a shared printer in the network (on a computer running Windows XP) with my laptop that is running Windows 7. The laptop can find the printer but returns a "failed to connect, the operation failed with error 0x0000046a.

  On a separate similar network setup (same model printer attached to a computer which is running XP), the connection works perfectly.

  The program installation, above, which gives the printer connect error worked well, until I had a failure to drive on the XP machine and restored the (previously saved) XP operating system. I deleted the printer both XP and Windows 7 computer portable machine and more, but still not the same error.

  This utility is completely useless. He tries the 'Add printer' Wizard, reached the error and give up, with no details except the error number.

  Can someone help me?

  Thank you, jsmith33

  Please see this thread:

  printing network: cannot install the printer 0x0000046a error code HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• Connection to blog___An error error occurred when tries it to connect your underlying connectio of blog___The was closed. could not establish trust relationship for the secure channel.__you SSL/TLS must correct this error before proceeding

  I installed Microsoft Security Essentials 2 days back... I get some error messages since then.

  I use Windows live writer to load my post on the blogger. My computer is Windows XP with SP3.

  Since installing MSE, when I try to post on my blog using windows live writer, I would say an error message:

  "Connection to the blog error."

  An error occurred while trying to connect to your blog

  The underlying connectio was closed. could not establish trust relationship for the SSL/TLS secure channel.
  You must correct this error before proceeding. "

  Please help me solve this problem. Your valuable advice is apprecited. Thank you.

  Post in the MSE forums:

  http://answers.Microsoft.com/en-us/protect/default.aspx

• When I try to log in my account, I get the message "a network error occurred while trying to connect.  How can I fix it?

  When I try to log in my account, I get the message "a network error occurred while trying to connect.  How can I fix it?

  Hi Mark,

  Are you trying to connect through Adobe Reader? If so, what happens when you connect via the web interface at https://cloud.acrobat.com?

  (We had reports of this error occurring in the latest version of the reader.)

  Best,

  Sara

• I get an error message when I try to log into ExportPDF with my Adobe Reader software. "Network error has occurred trying to connect. Can someone help, please?

  I get an error message when I try to log into ExportPDF with my Adobe Reader software. "Network error has occurred trying to connect. Can someone help, please?

  Hi Simon,.

  I'm sorry to hear that you are having problems connecting to ExportPDF by the reader. I checked your account and everything is fine there.

  To start, please make sure that you have the latest version of the reader on your computer by choosing Help > check for updates.

  If you still have problems to connect by the player, please try to connect to the web interface at https://cloud.acrobat.com.

  Please let us know how it goes.

  Best,

  Sara

• I can't connect to the internet, get a message when trying to connect it says windows cannot access the specified device

  I get a message when trying to connect it says windows cannot access specified device.you may not have permissions appropriate to access them on my laptop

  Hi MelissaBoltik,

  ·         What is the exact error message?

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article to reset the TCP/IP settings.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

• Received this error code when trying to install win 10. the message was ' ' has no 1 update "and"windows update has encountered an unknown error."

  Original title: error code 88982F04

  Received this error code when trying to install win 10.   the message was ' ' has no 1 update "and"windows update has encountered an unknown error."  I have win 7 Home premium SP1 running on a desktop HP Pavilion p7-1210 PC.  Can someone please help with an answer.

  Thank you

  Delete C:\$WINDOWS.~BT

  Open the C:\ drive, and then delete the folder: C:\$WINDOWS.~BT and then restart your computer, and then try to upgrade again.

  

  If the upgrade of Windows 10 Assistant becomes blocked or unresponsive to different percentages: 0%, 32%, 62%, 87%, 99%, please wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.

  If you find it difficult to do some of the steps below, please see instructions how do their:

  http://windows10forum.com/blogs/entry/3-How-to-ensure-a-smooth-upgrade-to-Windows-10-anniversary-update/

  If you encounter an error about enough space to perform the upgrade, see the instructions:

  How to install Windows 10 on devices with limited space

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1: Using the media creation tool

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  Select upgrade this PC now and then click Next

  

  Option 2: upgrade using the file ISO for Windows 10.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
  • Support your default BIOS reset BIOS.
  • Check if there BIOS updates available for your system, and then to apply them.
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.

• 651 error code when trying to access broadband

  Got A error code 651 when trying to connect to broadband.

  1 Troubleshooting DAB - did not help

  2 off the PC, the modem cable and switch. Disconnected and reconnected cables Cat5. Rebooted devices in the following order: PC, modem, switch.

  3 Ran Microsoft Fix it 20140. Said it fixed two things, but still no luck with the connection.

  4. ran regsvr32 raspppoe.sys and received the message: "raspppoe.sys" failed to load module. Make sure the binary is stored at the specified location, or debug it to check for problems with the binary or dependent file. DLL files. The specified module could not be found.

  5. try to rename raspppoe.sys to raspppoe.old in order to replace it and got the message: you need permission of the Trusted Installer to make changes to this file.

  Any help on where to go from here?

  Keep brainstorming until I thought this myself. Went to the Device Manager and deleted the WLAN device. Restarted PC and it automatically detected a 'new' hardware and driver installed. Direct connection worked. End of the problem.

• Im having trouble with my iphone 16 GB ios 9.3.3 5s (G 13, 34) receive error code 22 tries to connect to the server, and nowhere suggestions?

  Im having trouble with my iphone 16 GB ios 9.3.3 5s (G 13, 34) receive error code 22 tries to connect to the server, and nowhere suggestions? I have tried almost everything turn power switch wifi in the middle and doing it to try to track down the problem in the Device Manager and im completely disgusted

  Have you tried turning off and back on again?

• While trying to connect to the VPN Windows, I get an error 868. What does that mean?

  original title: connection to the VPN

  While trying to connect to the VPN Windows, I get an error 868. What it means. The address of the server I used was 68.28.195.137. Help, please.

  Vijay Kapnadak

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum. You can follow the link below to ask your question: http://social.technet.microsoft.com/Forums/en-US/category/w7itpro

• I'm getting error 646 when trying to get an update for windows vista (KB973917). I could manually download other updates, but I can't find it. Help!

  I get the error 646 when trying to update for windows vista (KB973917). I was able to update manually when I got this error but I can't find where to download this update.

  KB973917 (who is NOT a security update although it is security related) is only available through Windows Update.

  Chances are protections in real-time to your antivirus or internet security suite (for example, Norton 360;) Norton Internet Security; etc.) is involved here. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How can I fix C00D199F error code when trying to burn a CD with Windows Media player.

  Original title: How can I fix C00D199F error code

  Error message when trying to burn a cd with Windows Media Player

  Hello

  1. what version of Windows Media Player do you use?

  2. the specific issue of burning CD using WMP?

  3. What is the exact full error message?

  4. what you are trying to burn?

  5. is the specific question on the disk?

  Method 1: You can run the fixit available in the link below and

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/GP/cd_dvd_drive_problems/en-us?EntryPoint=lightbox

  Method 2: Clean the disc

  Clean the CD or the DVD. To do this, use a disc cleaning kit. Or gently wipe the silver side of the disc with a soft and Lint cotton cloth. Do not use cloth of paper which can scratch the plastic and leave streaks. When you clean the disc, wipe from the center of the disc outward. Do not use a circular motion. If the problem persists, clean the disc with a damp cloth or a commercial CD or DVD cleaning solution. Dry the disc thoroughly until you insert the disc in the drive.

  Select a slower recording speed and check if that helps.

  1. in the Tools menu, click Options, and then click the devices tab.
  2. in devices, double-click the CD burner, and then click the recording tab.
  3. in the write speed list, select a slower speed.

  Method 3:

  Perform the clean boot and check:

   

  http://support.Microsoft.com/kb/310353

  Follow the above article.

  
  If you have any third party installed a CD/DVD burning software, uninstall them temporarily for Add / Remove Programs. Subsequently, check if you are able to burn CDs in Windows Media Player.

  Reference: Burn your own custom CDs

  Hope the above information is helpful.

• Context: MSI Action failed, 0xC0070643 error code when trying to install AVG anti-virus program

  Original title: context: MSI Action failed

  Hello: I received the 0xC0070643 error code when trying to install the AVG anti-virus program.   What can I do to fix this problem, so I have AVG on my computer?   I thank really all those who are knowledgeable enough to help me straighten out it.

  Thanks again

  Daphna

  Hello
  
  1. are you able to install other applications successfully?

  According to my research, this error message appears if you have traces of a previous installation of the AVG software.

  Download the AVG remover to remove the previous version and then try the installation again and check.
  http://www.Avg.com/us-en/utilities

  The link below also discuss the matter even.
  http://forums.Avg.com/au-en/AVG-Free-Forum?sec=thread&Act=show&ID=114995

  Hope this helps

• I get an unknown error 4260 when trying to burn a cd using itunes, I have a windows xp pc and used to burn the cd fine until 2 weeks ago, I don't know what has changed... Can anyone help please?

  I get an unknown error 4260 when trying to burn a cd using itunes, I have a windows xp pc and used to burn the cd fine until 2 weeks ago, I don't know what has changed... Can anyone help please?

  Hello raulganau, welcome.

  I suggest to try the system restore to restore the system to a date before the problem started. Try this...
  1. click on START
  2. click on "all programs".
  3. click on "Accessories".
  4. click on "system tools."
  5. click on "system restore."
  6 follow the instructions on the screen to restore the system to a date before the problem started
  Although the system restore does not target the personal data, I recommend always backup your personal data, just in case something happens.
  For reference, I have included a link that provides more specific information about the restoration of the system and how to use it:
  http://support.Microsoft.com/kb/306084
  Let us know if it works,
  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Second laptop unable to connect; When trying to connect wirelessly, says connection is successful, but the Public unidentified network, no Internet.

  Hi all.

  I'm really sorry to post this question, I must have read 100 other threads on this topic, but none of the solutions seem to work for me.

  I have a home set wireless network in place, which may not have a lot of problems with it that I have a laptop W7 which has a perfect wireless connection, and also our TV connect when you want, as do our phones and Xbox.

  We bought a second hand Acer aspire laptop for our daughter. It is running Vista Edition family Basic. Even if she had the factory reset done on this, because we can connect to the router with an ethernet cable and it works very well, we managed to ensure that all updates of Windows etc are all complete.

  When trying to connect wirelessly, it says connection successful, but it is to a Public unidentified network, and there is no Internet. Also, even if it says Local access, we cannot connect to the router settings page is.

  I have uninstalled and reinstalled the built-in wireless adapter and updated the driver to do this, he says that he is as up-to-date as possible.

  I checked that DHCP is enabled, we tried dynamic and static IP addresses, we have disabled and re ipv6 enabled, we used the command prompt to reset winsock and stack ip, I looked into msconfig services for service # Id_String1.6844f930_1628_4223_b5cc_5bb94b879762 # Apple off but it isn't here.

  I have a real dislike for Norton / products McAfee and there is none of these on the laptop. We will install Comodo Internet Security, Eusing Registry Cleaner, Spybot S & D and Spyware Blaster as soon as the wireless is configured and that the Windows Firewall is disabled.

  We also have many turns of the spin off the coast and laptops, etc. and deactivation and activation of the adapter.

  It seems that all the usual solutions for the lack of connection are not the culprits this time.

  IPconfig for W7 laptop that works well is:

  Microsoft Windows [Version 6.1.7601]
  Copyright (c) 2009 Microsoft Corporation. All rights reserved.

  C:\Users\Adrian>ipconfig/all

  Windows IP configuration

  Name of the host...: Adrian-laptop
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Virtual WiFi Miniport adapt
  Physical address.... : 78-E4-00-D1-5F-6A
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Broadcom 4313 802.11b/g/n
  Physical address.... : 78-E4-00-D1-5F-6A
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::30fd:c01f:ab28:fbf9% 13 (Preferred)
  IPv4 address: 192.168.1.3 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: 13 August 2012 09:16:54
  End of the lease...: August 14, 2012 09:56:23
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DHCPv6 IOOKING...: 360244224
  DHCPv6 DUID customer...: 00-01-00-01-13-B2-5C-FD-90-FB-A6-A5-8F-73

  DNS servers...: 192.168.1.1.
  192.168.1.1
  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {09285A7E-7837-4D7B-994D-C70130D43958}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card adapt 6TO4 tunnel:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 15:

  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:5ef5:73 b 8: 8ed:720:a3fa:1e53 (Prefer
  Red)
  Address IPv6 local link...: fe80::8ed:720:a3fa:1e53% 24 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled

  Reusable Microsoft 6To4 tunnel map:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 adapt #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 11:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 adapt #3
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  IPconfig for the Vista laptop that works wired but not when it's wireless is:

  Microsoft Windows [Version 6.0.6000]
  Copyright (c) 2006 Microsoft Corporation. All rights reserved.

  C:\Users\Adin>ipconfig/all

  Windows IP configuration

  Name of the host...: Georges-PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Atheros AR5007EG Wireless Network adapt

  Physical address.... : 00-1D-D9-1B-71-69
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::78c1:cedd:291c:e44b % 11 (Preferred)
  IPv4 address: 192.168.1.2 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: August 13, 2012 11:28:16
  End of the lease...: August 14, 2012 11:28:16
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DHCPv6 IOOKING...: 151002585
  DNS servers...: 192.168.1.1.
  192.168.1.1
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Broadcom NetLink (TM) fast Ethernet
  Physical address.... : 00-1B-38-5C-28-24
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 6:

  The connection-specific DNS suffix. :
  ... Description: isatap. {E409704E-A039 - 41A 8 - BEB9 - 614B6A018}
  493}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::5efe:192.168.1.2%12(Preferred)
  ... Default gateway. :
  DNS servers...: 192.168.1.1.
  192.168.1.1
  NetBIOS over TCP/IP...: disabled

  Card tunnel Local Area Connection * 7:

  The connection-specific DNS suffix. :
  ... Description: isatap. {CC1DD067-8D6C-4BDE-BCC8 - 13921 941
  532}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  ... Default gateway. :
  NetBIOS over TCP/IP...: disabled

  Card tunnel Local Area Connection * 9:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Any help or advice will be most appreciated thanks

  Norton or McAfee pre-mstalled of recovery of the manufacturer media?

  If so, did you uninstall it AND run the tool to remove the appropriate product manufacturer?

  Download the Norton removal by https://www-secure.symantec.com/norton-support/jsp/help-solutions.jsp?lg=english&ct=united+states&docid=20080710133834EN&product=home&version=1&pvid=f-home

  Close all other programs, and then run the tool. When it is complete, reboot the machine if she wants it or not.

  Download the removal of McAfee Development tool from:

  http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  Click on save and save the file to a folder on your computer.

  Navigate to the folder where you saved the file.

  Right-click MCPR.exe and select "Run as Administrator" to run the removal tool.

  When you're finished, restart.