Error 64 c day KB953297

Similar Questions

• get error every 2 days and can not open anything on the server

  Hello, below mention error lights all 2 day windows 2012 R2 Standard and can't open something to the server. so that a solution to restart the server. Advice please.

  Log name: Application
  Source: Application error
  Date: 06/04/2016-17:17
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: WIN-QNQV536U26R
  Description:
  Name of the failing application: cmd.exe, version: 6.3.9600.17415, time stamp: 0x545042b1
  Name of the failed module: KERNELBASE.dll, version: 6.3.9600.18202, time stamp: 0x569e7d02
  Exception code: 0xc0000142
  Offset: 0x00000000000ecdd0
  ID of the process failed: 0x20d98
  Start time of application vulnerabilities: 0x01d1900efbdf6305
  The failing application path: C:\Windows\SYSTEM32\cmd.exe
  Path of the failing module: KERNELBASE.dll
  Report ID: 3990b34b-fc02-11e5-80e7-2c44fd7e50ff
  Faulting full name of the package:
  ID of the failed package-parent application:
  The event XML:
  
   
     
      1000
      2
      100
      0 x 80000000000000
     
      7247
      Application
      WIN-QNQV536U26R
     
   
   
      cmd.exe
      6.3.9600.17415
      545042b 1
      KERNELBASE.dll
      6.3.9600.18202
      569e7d02
      C0000142
      00000000000ecdd0
      20 D 98
      01d1900efbdf6305
      C:\Windows\SYSTEM32\cmd.exe
      KERNELBASE.dll
      3990b34b-fc02-11e5-80e7-2c44fd7e50ff
     
     
     
     
   
  

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Printhead error on 30 - day old HP OfficeJet Pro 6830

  I have a month old HP OfficeJet Pro 6830.  I get the following error: "ERROR: problem with printhead.

  I tried the following:

  (1) the printer reset

  (2) installation of new HP ink cartridges

  (3) selecting "clean print heads" in the menu of the screen - but the printer is not responding

  I have need ideas on what to do next, or if I should just return this printer to die after a month of domestic use.

  Hi Betsy,

  I found a document that talks about this problem.  He recommended that the reset of the printer that list you as something you did.

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-6830-e-all-in-one-printer-series/5390307/model/7107898/document/c03026717

  I would recommend the once - printer reset, but if this does not resolve the issue - I return it.

  I'm sorry for the difficulty.

  Jean

• Pavilion P6510f: I get an AMD RAIDXpert error message every day

  I get the same error several times in less than a minute each time.  The only difference seems to be the date/time group.  I think that this occurred shortly after the upgrade from Windows 7 to Windows 10.

  AMD RAIDXpert
  [20/01/2016 11:01:45]
  Task b0 timeout on disk (Port number
  1, target 1 ID) to LBA 0x0a0c24f00
  (0 x 0 length)

  After having tried and re - try the BIOS changes at our previous sessions - wary of re-formatting the hard drive - I had no change and even a little cold re-boots when he wanted to know what language I preferred for my keyboard (without allowing me to use my keyboard to answer, of course), I continued to search, search and found some suggesting it could be a sign that my hard drive has failed.  I started to make a back up of my files but found that I couldn't do even that since Bitlocker blocked my backups finish.  OFF to Microsoft for more information on Bitlocker, after I couldn't find anything of it on my computer.  Microsoft said I could get the passward Bitlocker them but alas once I got the password, they said that I didn't even have Bitlocker.  Hmmmmm.  I started to save my relevant files by copying on USB keys.  A few hours later, I discovered that I received is no longer the RAIDXpert error messages, nor I experience today either.  I hesitate to say this, but, although we do not know how, the problem seems to be solved.  Thank you for sharing your wisdom and knowledge, my friend.

• IPhone 4 update and restore error

  Hi, my iphone 4S get error at yester day. And now I get the error in the firmware restore in iTunes.

  Failure without title (29)

  First of all, I want to thank you because broke my iphone.

  I don't know what to do. Can you help me? Thank you

  It is copied from here. Follow the instructions below.

  Get help with iOS update or restore errors - Apple Support

  Search for hardware issues

  If you see the error 53, know what to do.

  Errors: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 56, 1002, 1004, 1011, 1012, 1014, 1667 and 1669.

  Your iPhone, iPad or iPod touch or computer might have a hardware problem that prevents the upgrade or restore to complete.

  1. Make sure that your security software and settings are not blocking your device to communicate with the server to update from Apple.
  2. Try to restore your iPhone, iPod or iPad, twice as much when you are connected with a computer cable, and network that you know are good.
  3. Make sure that your security software and settings are allowing communication between your iPhone, iPad or iPod touch and update servers.
  4. If you still see the error message when you update or restore, contact Apple technical support.

  If you still see the error message, are looking for outdated or updated software.

• HP ENVY 360: FlexNet Connect continuous error state

  I recently bought a laptop HP ENVY 360 and apparently, there's an application installed (via HP) called FlexNet who supposedly examines your system for updates and maintains the current system.  The system is constantly accumulate errors throughout the day like this...

  FLEXNET CONNECT CLIENT...  Generic communication error...  HTTP error was returned by the server... said response code Error (500)

  I'll go up to 10 or more of these error windows accumulate on my screen at any time.

  I followed suggestions to install a Manager software and using the procedure of removal of companies without success.

  Does anyone else have this problem - suggestions?

  Thank you, Scott

  Hi @ScottB2,

  Welcome to the HP Forum! Is a great place to find answers and advice! You have the best experience on the HP forum, I would like to draw your attention to the Guide of the HP Forums. First time here? Learn how to publish and more. What is your specific model of HP x 360 notebook? Computers laptops HP - how can I find my model number, serial number or product?

  FlexNet Connect is mainly for virtual (VPN) connections. If you do not use this option, you may simply need to uninstall. Here are a few links that should be instructive. :

  HP FlexNetwork Architecture (from Wikipedia)

  HP Virtual Connect FlexFabric understanding mappings with VMware vSphere (from virtualkenneth.com)

  Please be aware that HP does not support VPN connections, but if you want to use this link should help you set it up. Education - United States and Canada

  Please keep me updated.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek. "In addition, by clicking on the" ""Twww.Mountainview.rsb.qc.ca Up ' below is a great way to say thank you!

• Storage full error

  Hello everyone.

  I hope here, I could find help after the Ive looked everywhere for an answer, and I tried everything I could think of.

  My iCloud keeps sending me a message to buy more storage as my storage, however, is "complete" (see pictures) my storage is almost empty.

  I tried to remove all of my iCloud with my iPhone, my computer. Nothing works.

  I have only notes, whatsapp and contacts to be updated which altogether, they do not reach the 5 GB prI is dead and still the same error. Every day, several times a day.  Is someone can you please help me sort? It's *.

  Thank you.

  

  

  

  

  Hey MikaOK,

  I can help you understand why you see the notification of not having enough storage space for your backup via iCloud.

  The reason is that your iPhone up to may be larger than 5 s GB you have at your disposal. Go to settings > iCloud > storage > manage storage, you should see a list of backup and probably just one that has the name of your iPhone with a bottom cap that says this iPhone. Tap that and you will see what occupies more space. It could be things like Photos, Messages and other applications on your iPhone that are backed up via iCloud. Take a look at the article below for more details on the management of your iCloud-storage space.

  Manage your iCloud-storage space
  https://support.Apple.com/en-us/HT204247

  Select iOS apps to save

  Many applications saves automatically in iCloud after their installation. You can change the apps back to iCloud and remove existing backups of data on the application of your storage space.

  Use the following steps on your iPhone, iPad or iPod touch:

  1. Tap Settings > iCloud.
     • If you use the iOS 8 or later, click on storage > storage management.
     • If you use an older version of iOS, type storage & backup > manage storage.
  2. Tap the name of your iOS device.
  3. Under Save Options, turn off all the apps you don't want to back up. When you are prompted to confirm, select Turn Off and delete to disable backup so that the app and remove all data from iCloud.

  Take care

• Error activation product key has been used already on Windows Server 2012.

  Original title: Activation error

  Two days ago, I installed windows server 2012 on my PC... It has been corrupted because of virus on my USB key that I reinstalled it twice but both times, it has been corrupted... when I installed it third time Activation has failed, it is said that this product code was used on another pc... no activation now please help me... and one thing I've never done any material change

  Try the phone activation, you may have to do during the week:

  1. press the Windows key + X , and then click run, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• Get the error message "send and receive reported an error (0x800CCC92): your e-mail server rejected your login. '. Check your username and password in your account properties.

  Get the error message "send and receive reported an error (0x800CCC92): your e-mail server rejected your login. '.  Check your username and password in your account properties.
  I'm using Outlook 2002 on the XP Pro operating system.

  It lasts for almost a year, but I managed to work around the issue since it was started using a different outgoing SMTP user name and the password.  (More settings, outgoing server tab, log in using...)  Now it has stopped working.

  There are four machines at this place and all suffer from the same problem.  I use a LinkSys RVS4000 router.  The previous Linksys router has also had the same problem so I replaced, thinking he can correct the problem, he didn't.
  Troubleshooting:
  a. I am able to recreate the account on another machine to a different place and it works.
  b. I can take an account of my machine, create in this place and it will not work.
  c. accounts deleted and created a new, did not
  d. has replaced the router to the place with a new Linksys router
  e. contacted support for ISP, (Time Warner), they accuse the hosting company
  d. contacted support for hosting of the company (HostCentric) they blame the ISP
  c. confirmed username and passwords are correct.
  e. There are 4 machines in this place with different addresses.  All started having this problem/error the same day within hours
  f. may receive emails cannot be sent.

  http://expwinproblems.blogspot.com/2010/11/error-messages-in-Outlook-when-send-or.html

• "NMIndexStoreSvr.exe" error appears constantly

  NMIndexStoreSvr.exe has encountered a problem and needs to close. We are sorry for the inconvenience.

  If you were in the middle of something, the information you were working on might be lost.

  Please tell this problem to Microsoft.

  We have created an error report that you can send to us.

  We will treat this report as confidential and anonymous.

  To see what contains this error report, click here.

  Send error report do not send

  _____________________________________________________________________________

  The above error report is an ongoing problem all day for several months.

  I can't remove it.

  I continue to send error reports every day, but Microsoft ignores them.  Why?

  I don't know how to solve this problem.  I need your help.

  Hello

  I suggest you try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• Blue screen STOP error: 0 x 00000050 [0xE4489414 0 x 00000001 0x8054BFD2 0x00000001]

  First of all, I got the blue screen error a few days ago. I left my computer and works fine while I went to school, when I got home, it rebooted and frozen to the diagnosis of the BIOS screen. I turn it off and restarted again, and before windows could load up, he got a bluescreen and restarted. Once more, he froze in the diagnosis of the BIOS screen. I didn't know what was going on, so I unplugged my computer and reset the BIOS by removing the battery, and it put it back again. Then I plugged in the computer and it starts. It loaded windows, and I logged on. Windows has worked for about 10 minutes before he got another blue screen of the same type. The screen flashed by too fast for me to read. He said something about 'Memory error'.

  I tried to restart the computer, and he hung up on the screen of the BIOS again, so I reset the BIOS again and was able to open a windows session. I thought I might have a virus, so I start Microsoft Security Essentials and started a full analysis. 5 minutes later, I got the blue screen again. After this third blue screen, nothing I tried would let me connect you. I have reset the BIOS again, tried the last known good configuration (which has worked for 3 minutes) and I tried to start in safe mode. Nothing has worked. Finally I said a few expletives, re-formated my HARD drive and reinstalled windows Xp. It worked well until everything has been done, and when everything was finally set up and running, 20 minutes later I got the blue screen again. I gave up and left the computer to sit for a day, while I thought about what to do. Last night, I turned on it and hey presto, it works again.

  It worked for about 6 hours, then I disconnected and close. This afternoon I turned it on and it worked for about 2 hours, then I got a new Blue error screen. This time, the error remained on the screen long enough for me to write:

  STOP: 0 X 00000050 [0XE4489414 0X00000001 0X8054BFD2 0X00000001]

  PAGE_FAULT_IN_NONPAGED_AREA

  He made a memory dump, and then rebooted normally. To log in again, I got this:

  System has recovered from a serious error:

  BCCode: 1000008e BCP1: C0000005 BCP2: BF8B173F BCP3: B3BE4C3C BCP4: 00000000 OSVer: 5_1_2600 SP:3_0 product: 768_1

  He asked me to send an error report, so I sent off the coast, including the info dump and system memory. So far, I've been connected for about 45 minutes now without any problems. I had previously looked up the error memory and found a bunch of answers that don't really solve my problem. I have installed new equipment last year and the 4 GB of RAM I have in my system is much more than I ever use. I looked at the papers in computer management and found only an error, but it's because after I reformatted my computer, all the previous 'memory' error logs are now gone. Looking at the logs, I also found this error which has repeated every time my computer starts:

  AMLI: ACPI BIOS is trying to create an illegal memory OpRegion, starting to address 0xaabbccdd with a length of 0 x 400. This region is located in the operating system's protected memory address range (0x100000 - 0xdfedf800). This could lead to instability of the system. For technical assistance, please contact your system provider.

  I don't know if this error is related to my other problems or not. The strange thing about all this, is that these problems only suddenly came with none of these errors that occur before about 3 days ago. I also noticed undeclared my CD-Rom has a bad block of memory. I don't know why this product is no longer, because I bought brand new CD a year ago and have any errors with it so far.

  I don't really know what is happening, but I intend to test my RAM and buy a new key if none of them produce the 'memory error' once again, but so far, the computer is running somewhat normally, which is better than nothing. Any advice you have would be great.

  Thanks for your time,

  SLIM

  Much better and you are doing very well.

  Your video driver looks good, your sound is a bit out of date (the latest from Realtek is 5.10.0.6194).

  See the Readme for Realtek from here and see that the most recent driver is 5.10.0.6194, but if it was what he usually come in BSV.

  http://www.Realtek.com./downloads/downloadsView.aspx?langid=1&PNid=14&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  You can check your NVIDIA drivers on the NVIDIA website:

  I use the NVIDIA site and let their scanner online take a look at your video card and see what he suggests for drivers and consider their analysis if they offer a new driver.

  It is recommended to run the scan NVIDIA with Internet Explorer.

  Here is the address of the NVIDIA page:

  http://www.nvidia.com/download/Prescan.aspx?lang=en-us

  Read the instructions, and then click the GRAPHICS DRIVERS button to start the scan.

  I'd do the RAM test, and since you have a genuine XP bootable installation CD, you can start it and choose to enter the Recovery Console and run chkdsk/r as follows:

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same thing you see in the Explorer folder C:\WINDOWS.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  Start by checking the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  If you get a BSOD, we look deeper into the crash dump files which mean you must download this file "skydrive" share the thing they have here.  If you wish, you can go ahead and download the latest files from 5 dump for the practice.  I need practice too since I'm not a skydriver.  BSV has the information in pink in the lower pane of the form, but it is not in the general report.  Sometimes it NLY shows XP files in the upper part and there is probably nothing wrong with them.

  http://windowslive.com/online/SkyDrive

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• HP LaserJet M425dn MFP 400: Evolution of internal fonts in the printer configuration causes sporadic "error 49:0699".

  Hello, we had the following problem since we have put some of these models into production (3 in total and it happens to all 3 printers)

  We have an old program that sends print jobs to printers directly. It uses the internal settings of the printer to its police. Police 84 is the same font used on the old printers, so we have set up the default font for printers to 84 (they come with 23 configured by default on the page of Print, PCL5 parameters, policy number, in the web configuration of the printer).

  What we found is that if the police is 84, the printers will be sporadically throughout the day with the error error code 49.0699 and restart the computer, and then work fine for a while.  The strange thing is this isn't just error on printing, it will do this by making a copy or a fax or even try to print a report of service.

  When we initially troubleshoot-carried out the problem, we followed all the normal stages:

  Before each of these steps, we ensure no print jobs are waiting or begin to be sent to the printer.

  1:clear NVRAM

  2: Firmware update

  3: update driver

  4: change IP address

  5: remove from the network and connect via USB directly to the workstation

  6: replace formatter Board

  7:repeat steps 1-6.

  It wasn't until we changed the printer entirely with a brand new and have experienced the same problem that we understood it was change the internal fonts that seem to cause the problem. If we let the police as 23, printers have no error throughout the day, or on the print or fax or transcription.

  Any ideas on how to solve this problem?

  Just in case someone runs into this post with the same problem, the latest firmware available for this printer (09/12/2015 when the post) has solved our problem.

• ERROR 80070652 CSC. EXE ERROR POPUP MICROSOFT NET FRAME

  CCS. EXE MICROSOFT NET FRAME ERROR POPUP 4 DAYS. INTERUPTS MY WORK. RECENTLY CHANGED SERVERS. FROM ATT.NET TO COMCAST.NET.RECENTLY UPDATE INSTALLED JAVA. NO INFO TO SOLVE THIS PROBLEM WOULD BE APRECIATED

  Hi Zanth01,

  The csc.exe file uses Microsoft .net Framework. These errors can occur if there is no problem if the .net framework, or any other application using the .net framework.

  Has) if there is no associated framework .net programs installed, I suggest you to uninstall those and see if the problem still occurs.

  B) if that doesn't help.

  Click here to download the .NET Framework cleanup tool. This .NET Framework cleanup tool is designed to automatically perform a set of steps to remove some versions of the .NET Framework of a computer.  It will remove the files, directories, registry keys and values and record information product of Windows Installer for the .NET Framework.

  Download and reinstall all the versions of the .NET Framework that were previously installed on the computer.
  To download all versions of .NET Framework below mentioned link http://support.microsoft.com/kb/923100 visit

  After installing all versions of the .net framework, check if the problem is resolved.

  See the same type of problem in the link http://social.answers.microsoft.com/Forums/en-US/vistasecurity/thread/c565fd8e-bd3e-4d8b-a3c8-c974e2429b1e

  Diana
  Microsoft Answers Support Engineer

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error: Cannot start Microsoft Outlook. Canoe open the outlook window

  I get this error message.  I did the microsoft fixit program and removed from the registry.  Thisd worked now for a few days then I got the error again.  I kept getting the error every few days, but now as soon as I use it and set up account I get the error.  Help was written for windows XP.  I was getting the error on windows vista occationally and all the time in windows 7.  I so get frustrated being that this error arround for years.  I have no idea of what keeps corrupting my pst, but it becomes crazy.

  Outlook:

   

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://answers.Microsoft.com/en-us/Office/ee861097.aspx

  Outlook Help Forums at the link above.

  They will help you with your Outlook questions when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• Get (5) different SAS errors for more than a year. Finally noticed after a disk RAID 1 is dead and the replacement drive will not ready. What is my controller?

  Just noticed newspapers Windows for my 6/iR PERC have been reporting these errors almost every day for a year, is my bad controller?  If Yes this is very unfortunate because it is integrated.

  1.) sense unexpected. SCSI sense data: Sense key: sense 3:11 qualifier detection code: 1: physical disk 0:0:0 controller 0, slot 0

  2.) SAS port report: SAS wide port 0 link lost on PHY 0. : controller 0 (SAS 6/iR integrated)

  3.) predictive Failure reported: physical disk 0:0:0 Controller 0, slot 0

  4.) (ERROR MORE RECURRING): a disk media error has been corrected. : virtual disk 0 (virtual disk 0) controller 0 (SAS 6/iR integrated)

  5.) \Device\RaidPort0, restore the device, has been published.

  Hello.

  In addition to the Windows logs, what is the status of the disk (VD) virtual and physical disk 0:0:0 in the BIOS of the controller or the OpenManage Server administrator? If the status of predictive failure is constantly reported, then you can consider replacing the physical disk 0:0:0. If the replaced disk is offline, try to force if online via the controller BIOS. Make sure that your BIOS and controller firmware is up-to-date.