Error address IP IX2 individual cloud in the Cloud graphic configuration interface

Similar Questions

• Whenever I start the computer I lost the wireless capability. I get error WZC "871122". I then start the automatic Wireless Configuration service. Is there something I can do if I can't do it every time that this?

  Continually 871122 WZC error.

  Hi Shane,

  Looks like you have (or had) 3rd party software that previously managed your wireless connections, so casting service windows does not start automatically.

  See the following Article in the Microsoft KB, see if it suits it for you;

  http://support.Microsoft.com/default.aspx/KB/871122

  More precisely:

  If your computer or your wireless network card came with its own wireless network software, follow these steps:

  1. Click Start, click run, type ncpa.cpl and click OK.
  2. Click on network connections.
  3. In network connections, select your wireless connection, and then click change settings of this connection.
  4. On the wireless networks tab, click to select the Use Windows to configure my wireless network checkbox.

  To start the automatic Wireless Configuration service, follow these steps:

  1. Click Start, click run, type %SystemRoot%\system32\services.msc/s, and then click OK.
  2. Double-click Wireless Zero Configuration.
  3. In the list of Startup type , click Automatic, and then click apply.
  4. In the Service status area, click Start, and then click OK.

  Let me know how you go.

• Quando vou instalar o Illustrator, appears um erro code 201 ao executar o Creative Cloud.e problema? / When I installed Illustrator, pops up an error code 201 Como delivery estwhen running the creative cloud. How to solve this problem?

  

  Hi Calne,

  Please see the help document that below that explains the error Code 201:

  Download error, installation or update of Cloud Creative applications

  You can also see the thread below where this issue has been addressed:

  Error 201

  Error 201; CC constantly disconnected desktop application, will not download again

  Kind regards

  Sheena

• Windows system error: there is an IP address conflict with another system with the network. How do I remove this error message?

  I just installed a new internet provider and all of my connections are working fine, but I constantly get this "Windows system error: there is an IP address conflict with another system with the network." I have my electrician of the internet modem connected to my office. I have also two wireless devices connected to the appearance of the Modem wireless. I constantly get this error message mentioned above, and I want to get rid of it.

  This means that all that he says.  Your Windows system has an address that already exists on your local network.  Turn your system off and use a working system to locate this address and to which unit he belongs.  In most LANs, the router's DHCP server.  You may be able to ask the router which addresses are used and see what device uses this address, but I suspect not.

  Duplicate addresses can occur when two systems received the same address manually, or when we got an address in the DHCP of the router range. It is unclear when this happened because he is not in control of the address and puts the address duplicate to a second system.  You need to track down, ensuring that all addresses manually asigned are out of the DHCP range, that you book the address of the router, if you want the device to use this address, or configure all devices to request the address of the router using DHCP.

• Windows - system error. There is an IP address conflict with another system on the network.

  Windows - system error. There is an IP address conflict with another system on the network.

  This message indicates a problem with the assignment of IP addresses on a home network.  Restarting the computer should fix.  If you have a broadband router, restart the router, too. Boulder computer Maven
  Most Microsoft Valuable Professional

• Why does say download error when I download creative cloud? It worked the other day, but when I came back on my laptop that I couldn't open my apps I had installed

  Why does say download error when I download creative cloud? It worked the other day, but when I came back on my laptop that I couldn't open my apps I had installed

  Hello

  Please see the links below for help:

  Using creative cloud | Download error in the applications tab of Creative Cloud Desktop Application

  Re: Creative Cloud "Download error" message

  Error in downloading, installing or updating Adobe Creative Cloud applications

  Hope this helps!

• Hello! I can't subscribe to creatively Cloud for photographers. When you subscribe to gives an error when you pay with the card: "order processing error occurred for more information, please contact the Customer Service by phone 8 800 333 36 63."

  Hello! I can't subscribe to creatively Cloud for photographers. When you subscribe to gives an error when you pay with the card: "order processing error occurred for more information, please contact the Customer Service by phone 8 800 333 36 63, when making a payment via PayPal: PAYMENT_CPG_SETTLE_FAILED. How to order?

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• Hi, I am trying to install Adobe Creative Cloud and I get error 43. I tried to use the Adobe cleaning tool and uninstall but nothing has changed. What can I do?

  Hi, I am trying to install Adobe Creative Cloud and I get error 43. I tried to use the Adobe cleaning tool and uninstall but nothing has changed. What can I do?

  Hi carlottav39691716,

  Please see the following links:

  Error 43 - I can't download any adobe apps CC or creative cloud Manager

  Creative cloud, re-install-Dungeon error 43

  Error in downloading, installing or updating Adobe Creative Cloud applications

  Let us know if that helps.

  Kind regards

  Sandrine Bani

• I'm not able to install illustrator creative cloud CC. This is the error when I download creative cloud app. "Cannot write the registry value. "Verify permissions, and then try again.

  I'm not able to install illustrator creative cloud CC. This is the error when I download creative cloud app. "Cannot write the registry value. "Verify permissions, and then try again.

  No one can tell you anything without the info adequate system or other technical details, including the exact error message.

  Mylenium

• I am unable to connect to creative cloud. The error that says Unable to get on the Adobe servers

  I am unable to connect to creative cloud. The error that says Unable to get on the Adobe servers

  Please see:

  1. Creative cloud activation and login troubleshooting
  2. Adobe Download Manager cannot happen on the Adobe servers
  3. Cloud cannot create arrived on Adobe servers.

  You can try to remove creative cloud app and reinstall it.

  • Using creative cloud | Uninstall the creative cloud desktop application
  • https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  Install the cloud creative app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

• Get the error when update: Office creative cloud could not be updated. (error code: 2)

  Get the error when update: Office creative cloud could not be updated. (error code: 2).

  I'm on a McBook Pro, OSX 10.9.5 retina.

  How to fix error Code: 2?

  Always the same?

  Follow the procedure below:

  Please follow the steps below:

  1)

  Click on the Finder and search options listed next to icon located Apple in the upper left of the screen and click on the "Go" menu button and select 'utilities '.

  (Applications > Utiliites)

  Look for a CC Adobe and Adobe Application Manager folder under utility window and trash both folders.

  2)

  Click on the link below and download & run the cleaning of Adobe tool:

  Select the option "Adobe Application Manager for Mac OS X 10.6" and then click on "Clean up selected."

  https://helpx.Adobe.com/content/help/en/Creative-Suite/KB/CS5-cleaner-tool-installation-PR oblems/_jcr_content/hand-Sea/accordion_container_1/accordion-nominal/accordion-point-1/agreement I on-item-par/procedure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleane r Tool.zip

  3) click on the link below and download file Creative Cloud install and use the same to install the creative Cloud Desktop application.

  https://creative.Adobe.com/products/creative-cloud

• I get an error indicating cc cookies dir: cannot do file / cookies: permission denied (error 13) when I tried to download the installer of creative cloud on my Mac. Can anyone help with similar pop-up window?

  I get an error indicating cc cookies dir: cannot do file / cookies: permission denied (error 13) when I tried to download the installer of creative cloud on my Mac. Can anyone help with similar pop-up window?  I try to get a trial version of CS5.

  You don't need to involve creative cloud to install try the trial version of CS5...

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

• Getting the error "There is an IP address conflict with another system on the network." on XP computer

  "There is an IP address conflict with another system on the network." I keep getting these messages on my computer. -What it means and how to solve this?

  IP addresses are assigned to a computer in one of two basic methods: the address is assigned automatically by the device "in charge" of the network (in your case, the wifi hotspot router) or the address is set manually on the computer.

  If the address is assigned automatically, the router is "smart" enough to assign a different address for everyone.  However, if your computer has a fixed or 'static' IP address assigned manually, it may conflict with an address assigned by the router to another computer.

  You do not specify, so I'm going to assume that your computer is running WIndows XP...

  1. On your computer, open the network connections (start > run > ncpa.cpl > OK)
  2. Right-click on the icon for your wireless adapter and select Properties
  3. Click on the 'Général' tab, select "Protocol Internet (TCP/IP)" from the list of "this connection uses the following items" and click "Properties".
  4. Select the boxes for two on "Obtain an IP address automatically" and "Obtain DNS server address automatically"
  5. OK your way out.

  This will not adversely affect your computer somehow.

  If the two "automatic" settings were already selected, it is likely that your wireless adapter is managed by a utility provided by the manufacturer of your computer or your adapter wifi rather than Windows.  There should be a wifi icon in the system notification area (near the time display).  Click or right-click on it and see if you can access the menu of configuration settings or to determine at which it is useful.

• Configure Apache HTTP Srvr for WLS12c error - "address already in use: make_sock: could not bind to address 80.

  Hello the Experts of Oracle.

  I already have

  1. installed the Apache HTTP Server (with libraries)
  2. Downloaded the Plugin of Apache WLS12c
  3. copied the plugin files into the appropriate directories.
  4. Modify the httpd.conf (see below)

  At the present time, I try to start the Apache HTTP server and runs in an unexpected error.

  WHY APACHE ATTEMPTS TO LISTEN ON PORT 80. ?  I've SPECIFIED the PORT 8888

  Question: How to go beyond the error.   -| "Address already in use: make_sock: could not bind to address 80 '

  My server is 192.168.1.21.  In my view, that it has ESTABLISHED processes.  Yet, he reports, that it cannot start.

  

  Here is the content of the httpd.conf file.  My customizations are in Red.

  #

  # This is the main Apache HTTP server configuration file.  It contains the

  configuration directives # that give the server its instructions.

  See # < URL: http://httpd.Apache.org/docs/2.4/ > for more information.

  # See especially

  # < URL: http://httpd.Apache.org/docs/2.4/mod/directives.html >

  # for an analysis of each configuration directive.

  #

  # Do NOT simply read the instructions here without understanding

  # what they do.  They are there only as advice or reminders.  If you do not know

  # consult the online documentation. You have been warned.

  #

  # Configuration and logfile names: If the file names that you specify for a lot

  number of files in server control begin by "/" (or "drive: / 'for Win32 '), the

  # server uses this explicit path.  If filenames do * not * start

  # with "/", the value of ServerRoot directive is preceded by - both "logs/access_log".

  # with ServerRoot set to "/ usr/local/apache2" will be interpreted by the

  # Server as "/ usr/local/apache2/logs/access_log", considering that "/ logs/access_log".

  # will be interpreted as "/ logs/access_log".

  #

  # ServerRoot: The top of the directory under which the server tree

  # configuration, error and the log files are kept.

  #

  # Do not add a bar slash at the end of the directory path.  If you point

  # ServerRoot to non-local disk, remember to choose a local drive on the

  # Directive Mutex, if based on mutex files are used.  If you want to share the

  # ServerRoot even for several demons httpd, you will need to change to

  # PidFile less.

  #

  ServerRoot "/ usr/local/apache2.

  #

  # PidFile: The file in which the server should record its process

  ID # when it starts.

  #

  PidFile ' / usr/local/apache2/logs/httpd.pid '.

  #

  # Mutex: Allows you to set the mutex mechanism and the mutex file directory

  # for individual mutex, or change the default global values

  #

  # Uncomment and change the directory if mutexes are based on files and the default

  # mutex file directory is not on a local disk or is not suitable for some

  # other reason.

  #

  # Default Mutex: newspapers

  #

  # Listen: Allows you to bind Apache to specific IP addresses and/or

  ports #, instead of the default value. See also the < VirtualHost >

  directive #.

  #

  # Change this to listen on specific IP addresses below for

  # prevent Apache glomming on all related IP addresses.

  #

  # Example-> look 12.34.56.78:80

  # Listen api.astcorporation.com:8001

  Listen 8888

  #

  # Dynamic Shared Object (DSO) Support

  #

  # To be able to use the features of a module that was built as a DSO you

  # duty place corresponding 'LoadModule' lines at this location until the

  # directives that it contained are actually available _avant_, that they are used.

  # Modules statically compiled (those listed by "httpd-l") is not necessary

  # to be responsible here.

  #

  # Example:

  # LoadModule foo_module modules/mod_foo.so

  #

  LoadModule authn_file_module modules/mod_authn_file.so

  #LoadModule authn_dbm_module modules/mod_authn_dbm.so

  #LoadModule authn_anon_module modules/mod_authn_anon.so

  #LoadModule authn_dbd_module modules/mod_authn_dbd.so

  #LoadModule authn_socache_module modules/mod_authn_socache.so

  LoadModule modules/mod_authn_core.so authn_core_module

  LoadModule modules/mod_authz_host.so authz_host_module

  LoadModule modules/mod_authz_groupfile.so authz_groupfile_module

  LoadModule modules/mod_authz_user.so authz_user_module

  #LoadModule authz_dbm_module modules/mod_authz_dbm.so

  #LoadModule authz_owner_module modules/mod_authz_owner.so

  #LoadModule authz_dbd_module modules/mod_authz_dbd.so

  LoadModule modules/mod_authz_core.so authz_core_module

  LoadModule modules/mod_access_compat.so access_compat_module

  LoadModule auth_basic_module modules/mod_auth_basic.so

  #LoadModule auth_form_module modules/mod_auth_form.so

  #LoadModule auth_digest_module modules/mod_auth_digest.so

  #LoadModule allowmethods_module modules/mod_allowmethods.so

  #LoadModule file_cache_module modules/mod_file_cache.so

  #LoadModule cache_module modules/mod_cache.so

  #LoadModule disk_cache_module modules/mod_cache_disk.so

  #LoadModule cache_socache_module modules/mod_cache_socache.so

  #LoadModule socache_shmcb_module modules/mod_socache_shmcb.so

  #LoadModule socache_dbm_module modules/mod_socache_dbm.so

  #LoadModule socache_memcache_module modules/mod_socache_memcache.so

  #LoadModule macro_module modules/mod_macro.so

  #LoadModule dbd_module modules/mod_dbd.so

  #LoadModule dumpio_module modules/mod_dumpio.so

  #LoadModule buffer_module modules/mod_buffer.so

  #LoadModule ratelimit_module modules/mod_ratelimit.so

  LoadModule modules/mod_reqtimeout.so reqtimeout_module

  #LoadModule ext_filter_module modules/mod_ext_filter.so

  Request_module modules/mod_request.so #LoadModule

  #LoadModule include_module modules/mod_include.so

  LoadModule modules/mod_filter.so filter_module

  #LoadModule substitute_module modules/mod_substitute.so

  #LoadModule sed_module modules/mod_sed.so

  Modules/mod_deflate.so deflate_module #LoadModule

  LoadModule mime_module modules/mod_mime.so

  LoadModule log_config_module modules/mod_log_config.so

  #LoadModule log_debug_module modules/mod_log_debug.so

  #LoadModule logio_module modules/mod_logio.so

  LoadModule env_module modules/mod_env.so

  #LoadModule modules/mod_expires.so expires_module

  LoadModule headers_module modules/mod_headers.so

  #LoadModule unique_id_module modules/mod_unique_id.so

  LoadModule setenvif_module modules/mod_setenvif.so

  LoadModule modules/mod_version.so version_module

  #LoadModule remoteip_module modules/mod_remoteip.so

  #LoadModule modules/mod_proxy.so proxy_module

  Modules/mod_proxy_connect.so proxy_connect_module #LoadModule

  Proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule

  Modules/mod_proxy_http.so proxy_http_module #LoadModule

  #LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so

  #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so

  #LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so

  #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so

  Proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule

  #LoadModule proxy_express_module modules/mod_proxy_express.so

  #LoadModule session_module modules/mod_session.so

  #LoadModule session_cookie_module modules/mod_session_cookie.so

  #LoadModule session_dbd_module modules/mod_session_dbd.so

  #LoadModule slotmem_shm_module modules/mod_slotmem_shm.so

  #LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so

  #LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so

  #LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so

  #LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so

  LoadModule modules/mod_unixd.so unixd_module

  #LoadModule dav_module modules/mod_dav.so

  LoadModule status_module modules/mod_status.so

  LoadModule autoindex_module modules/mod_autoindex.so

  #LoadModule info_module modules/mod_info.so

  #LoadModule cgid_module modules/mod_cgid.so

  #LoadModule dav_fs_module modules/mod_dav_fs.so

  #LoadModule vhost_alias_module modules/mod_vhost_alias.so

  #LoadModule modules/mod_negotiation.so negotiation_module

  LoadModule modules/mod_dir.so dir_module

  #LoadModule actions_module modules/mod_actions.so

  Modules/mod_speling.so speling_module #LoadModule

  #LoadModule userdir_module modules/mod_userdir.so

  LoadModule alias_module modules/mod_alias.so

  #LoadModule rewrite_module modules/mod_rewrite.so

  # Added on 23/09/2015 | -enabling reverse proxy requests for users of WLS12c

  LoadModule modules/mod_wl_24.so weblogic_module

  < IfModule unixd_module >

  #

  # If you want httpd to run as a different user or group, you must run

  # httpd as root initially and it will pass.

  #

  # Group / user: the name (or #number) of the user/group to run httpd as.

  # It is generally advisable to create a dedicated and aggregatable for user

  # httpd, as with most system services are running.

  #

  Demon of the user

  Daemon group

  < / IfModule >

  Server configuration # 'hand '.

  #

  # The directives in this section implement the values used by the 'hand '.

  # Server, which meets all demands that are not managed by a

  definition of # < VirtualHost >.  These values also provide defaults for

  # all < VirtualHost > containers you can set later in the file.

  #

  # All these directives may appear inside containers < VirtualHost >,.

  # in which case the value default parameters will be substituted for the

  virtual host of # being defined.

  #

  #

  # ServerAdmin: Your address, where problems with the server should be

  # e-mail.  This address appears on some generated by the page server, such

  # as error documents.  for example [email protected]

  #

  ServerAdmin [email protected]

  #

  # ServerName gives the name and the port used by the server to identify itself.

  # This can often be determined automatically, but we recommend that you specify

  # explicitly to avoid problems during startup.

  #

  # If your host doesn't have a registered DNS name, enter its IP address here.

  #

  Servername 192.168.1.21

  #

  # Deny access to the whole of the file system of your server. You must

  # explicitly allow access to web content directories in other

  blocks of # < directory > below.

  #

  < directory / >

  AllowOverride none

  Need all refused

  < / Book >

  #

  # Note that, from this point forward you must precisely enable

  features special # to be enabled - so if something doesn't work not as

  # you might expect, make sure that you have specifically enabled it

  # below.

  #

  #

  # DocumentRoot: The directory you are going to use your

  documents #. By default, all requests are taken from this directory, but

  aliases and symlinks # can be used to point to other locations.

  #

  DocumentRoot "/ usr/local/apache2/htdocs.

  < directory "/ usr/local/apache2/htdocs" >

  #

  # Possible values for the Options directive are "None", "All."

  # or any combination of:

  # Indexes includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews

  #

  # Note that "MultiViews" must be named * explicitly *-'all Options '.

  # is not give it to you.

  #

  # The Options directive is complex and important.  Please see

      # http://httpd.Apache.org/docs/2.4/mod/core.HTML#options

  # For more information.

  #

  Options Indexes FollowSymLinks

  #

  # AllowOverride controls what directives may be placed in .htaccess files.

  # It can be 'All', 'None', or any combination of key words:

  # AllowOverride FileInfo AuthConfig Limit

  #

  AllowOverride None

  #

  # Controls who can get stuff from this server.

  #

  Need of all granted

  < / Book >

  #

  # DirectoryIndex: sets the file Apache will serve if a directory

  # is requested.

  #

  < IfModule dir_module >

  DirectoryIndex index.html

  < / IfModule >

  #

  # The following lines prevent the .htaccess and .htpasswd files to be

  # seen by customers of the Web.

  #

  < files ".ht *" >

  Need all refused

  < / files >

  #

  # ErrorLog: The location of the error log file.

  # If you do not specify an ErrorLog directive in a < VirtualHost >

  # container, error messages related to this virtual host will be

  # logged here.  If you * define an error for a < VirtualHost > log file

  container of #, that host errors will be logged there and not here.

  #

  ErrorLog "logs/error_log".

  #

  # LogLevel: Control the number of messages in the error_log.

  # Possible values include: debug, info, notice, warn, error, crit,.

  # emerg, alert.

  #

  LogLevel debug

  < IfModule log_config_module >

  #

  # The following directives define some nicknames format for use with

  # a directive CustomLog (see below).

  #

  "LogFormat '%%u %t \"%r\ hour' % > s \"%{Referer}i\ %b" \"%{User-Agent}i\" "handset"

  "LogFormat '%%u %t \"%r\ hour' % > s %b "commune

  < IfModule logio_module >

  # You must enable mod_logio.c use %I and frequency

  "" LogFormat '%%u %t \"%r\ hour' % > s %b \"%{Referer}i\ "\"%{User-Agent}i\ "%I %o "combinedio

  < / IfModule >

  #

  # The location and format of the access (Common Log Format) log file.

  # If you do not have any logfiles access set in a < VirtualHost >

  container of #, they will be saved here.  On the other hand, if you * do *.

  # define per - < VirtualHost > access logfiles, transactions will be

  # logged there and * not * in this file.

  #

  CustomLog "logs/access_log" common

  #

  # If you prefer a log file of access, agent, and referer information

  # (Combined logfile format) you can use the following directive.

  #

  #CustomLog "logs/access_log" combined

  < / IfModule >

  < IfModule alias_module >

  #

  # Redirect: Allows to tell clients the documents used for

  # exist in your server's namespace, but no more. The customer

  # make a new request for the document at its new location.

  # Example:

  # Redirect permanent/foo http://www.example.com/bar

  #

  # Alias: Maps web paths into paths of file system and is used to

  # access content that don't live under the DocumentRoot directive.

  # Example:

  # Alias /webpath/full/filesystem/path

  #

  # If you include a trailing / on /webpath, then the server will be

  # require that he be present in the URL.  It is also likely that

  # duty provide a < Directory > section to allow access to

  # the path to the file system.

  #

  # ScriptAlias: This controls which directories contain server scripts.

  # ScriptAliases are essentially the same as assumed names, except that

  # documents in the target directory are treated as applications and

  # executed by the server on demand, rather than as documents sent to the

  client of #.  The same regulation on flight "/" applies to the ScriptAlias

  # as for the Alias directives.

  #

  ScriptAlias/cgi-bin / "/ usr/local/apache2/cgi-bin /".

  < / IfModule >

  < IfModule cgid_module >

  #

  # ScriptSock: On threaded servers, refers to the access path to the UNIX

  decision # used to communicate with the CGI mod_cgid daemon.

  #

  #Scriptsock cgisock

  < / IfModule >

  #

  # "/ usr/local/apache2/cgi-bin" just need to replace your ScriptAlias

  # CGI directory exists, if you have set up.

  #

  < directory "/ usr/local/apache2/cgi-bin" >

  AllowOverride None

  None of the options

  Need of all granted

  < / Book >

  < IfModule mime_module >

  #

  # TypesConfig points to the file containing the list of mappings from

  # MIME file extension - type.

  #

  TypesConfig conf/mime.types

  #

  # AddType allows you to add or replace the MIME configuration

  # the file specified in TypesConfig for specific file types.

  #

  #AddType application/x-gzip .tgz

  #

  # AddEncoding allows you to have certain browsers uncompress

  # information on the fly. Note: Not all browsers support this.

  #

  #AddEncoding x-compress. Z

  #AddEncoding x-gzip .gz .tgz

  #

  # If the AddEncoding directives above are commented out, then you

  # should probably define these extensions to indicate media types:

  #

  AddType application/x-compress. Z

  AddType application/x-gzip .gz .tgz

  #

  # AddHandler allows you to map certain "manipulators": file extensions

  # No actions associated with the file type. It can be either integrated into the server

  # or added to the directive of the Action (see below)

  #

  # To use CGI outside of ScriptAlias directories scripts:

  # (You will also need to add "ExecCGI" to the "Options" directive.)

  #

  #AddHandler cgi-script .cgi

  # For maps of type (negotiated resources):

  #AddHandler type-plan of the var

  #

  # Filters allow you to process content before sending it to the client.

  #

  # To parse .shtml for server-side includes (SSI) files:

  # (You will also need to add "Includes" the "Options" directive.)

  #

  #AddType text/html .shtml

  #AddOutputFilter INCLUDES .shtml

  < / IfModule >

  #

  # The mod_mime_magic module allows the server to use various boards of the

  content of the file itself to determine its type.  The MIMEMagicFile

  # directive tells the module where the definitions of suspicion.

  #

  #MIMEMagicFile conf/magic

  #

  # Customizable error responses come in three flavors:

  ((# 1) text 2) local redirects 3) external redirects

  #

  # Examples:

  #Error Document 500 "The server made a boo boo".

  #Error Document 404 Missing.html

  #Error Document 404 "/cgi-bin/missing_handler.pl"

  #Errordocument 402 http://www.example.com/subscription_info.html

  #

  #

  # MaxRanges: Number of channels in a Maximum request before

  # return the resource, or one of the extraordinary

  # values 'default', 'none' or 'unlimited '.

  # Default is to accept 200 beaches.

  Unlimited #MaxRanges

  #

  # EnableMMAP and EnableSendfile: on systems that support.

  projection in memory # or the sendfile syscall can be used to deliver

  # files.  Usually, this improves the performance of the server, but must

  # turn off when mounted network is served

  # file systems or if support for these functions is also

  # broken on your system.

  # Default: EnableMMAP, EnableSendfile Off

  #

  #EnableMMAP off

  #EnableSendfile on

  # Additional configuration

  #

  # The configuration files in the conf/extra/directory can be

  # included to add additional features or change the default configuration

  # the server, or you can simply copy their content here and change as

  # necessary.

  # Server-pool management (MPM specific)

  #Include conf/extra/httpd-mpm.conf

  # Multilingual error messages

  #Include conf/extra/httpd-multilang-errordoc.conf

  # Entries to the fancy directory

  #Include conf/extra/httpd-autoindex.conf

  # Language settings

  #Include conf/extra/httpd-languages.conf

  # User directories

  #Include conf/extra/httpd-userdir.conf

  # Info in real time on the applications and configuration

  #Include conf/extra/httpd-info.conf

  # Virtual hosts

  #Include conf/extra/httpd-vhosts.conf

  # Local access to the manual for the Apache HTTP Server

  #Include conf/extra/httpd-manual.conf

  # Distributed authoring and versioning (WebDAV)

  #Include conf/extra/httpd-dav.conf

  # Various default settings

  #Include conf/extra/httpd-default.conf

  # Configure mod_proxy_html to understand HTML4/XHTML1

  < IfModule proxy_html_module >

  Include the conf/extra/proxy-html.conf

  < / IfModule >

  # Secure connections (SSL/TLS)

  #Include conf/extra/httpd-ssl.conf

  #

  # Note: The following text should be present to support

  # start without SSL on platforms without equivalent/dev/random

  but # a statically compiled in mod_ssl.

  #

  < IfModule ssl_module >

  SSLRandomSeed startup builtin

  SSLRandomSeed connect builtin

  < / IfModule >

  #

  # Uncomment on the below to deal with user agents that deliberately

  # violate open standards by abusing DNT (DNT * must * be a specific)

  choice of end-users #)

  #

  # < IfModule setenvif_module >

  #BrowserMatch "MSIE 10.0"; bad_DNT

  # < / IfModule >

  # < IfModule headers_module >

  #RequestHeader unset DNT env = bad_DNT

  # < / IfModule >

  #= WLS 12 c routing Configuration. Seven 2015 =.

  # Added to fix the mistakes of transport of myAST resulting from the use of deprecated SSL 2.0 Mobile Security.

  # The following has been added to activate the reverse proxy requests from users of WLS 12 c-based applications.

  #-8002 port = SSL listener for api.astcorporation.com (managed server)

  # - the port 443 = SSL listener for myast.astcorporation.com (managed server)

  #

  # Phases of deployment:

  API.astcorporation.com:8001/myast # (1).

  # VirtualHost (2) Setup / WeblogicCluster guidelines to register myast.astcorporation.com:443

  # 3-test api & myast

  # 4-regenerate private certificate + all certificates.

  # Minimum nonclustered directive specifies WebLogic IP + port.

  < IfModule mod_weblogic.c >

  WebLogicHost 192.168.1.43

  WebLogicPort 8002

  Debugging now

  DebugConfigInfo WE

  Newspapers/myAst12c_WLS_error_log WLLogFile

  WLS-JSESSION-ID WLCookieName

  < / IfModule >

  # Proxy request per path Note: SetHandler specifies the handler for the plug-in module for the Apache HTTP Server

  < /myast location >

  SetHandler weblogic-Manager

  ErrorPage http://www.astcorporation.com/services/middleware/Middleware_Services.html

  < / location >

  # Added proxy

  ProxyPreserveHost off

  #ProxyPass /api http://API.astcorporation.com:8001 / myast

  #ProxyPass /myast http://myast.astcorporation.com

  I found my answer after I posted.  I'll leave it here to help others...

  The list of all instances of Apache that were started

  • ' ps - ef | grep apache. "

  Kill the persistent process

  

• Error 201 updated my creative cloud application

  I had a problem to update my app and the support service advised me unistall and install again. I uninstalled, but now I can not intall the updated app because the download stops at the same point and tells me "error 201". I already checked my conections again and again and found no problem...

  Help, please!

  Please see error downloading applications Cloud Creative - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html. He treats the error 201 so that provides links to the documentation on how to configure your network to work with the creative cloud.

  You can also reference the threads below where the issue has been addressed:

  Error 201

  Re: Download error when running CreativeCloudSet 201 - up.exe

  Forum link: error Mac 201

  Guinot