Error after the deployment of vShield endpoints (Guest Service of Introspection is not ready)

Similar Questions

• "JNDI name is already in use" error when deploying ADF Application after the deployment of Interface of AM Service

  Hello

  12.1.3 JDeveloper / WLS 12.1.3 / Windows 7 64-bit OS.

  I am facing the problem that is mentioned in the following post.

  https://community.Oracle.com/thread/2284290

  I created a simple ADF page with the data to display in the Employees table. The page works fine.

  I added a custom method to the AM and a profile of "Business Service Interface components" deployment of the AOS.

  When I'm trying to deploy the stand-alone WLS Service, it gives the error below.

  If I deploy only the AM Service interface, the web service deployment is going very well.

  If I cancel the deployment of the AM Service and deploy ADF EAR, then it also works very well.

  But if I deploy the AM Service and then try to deploy the EAR, then it gives the error below.

  And vice versa, if I deploy EAR application, and then deploy the AM service, it gives the error below.

  It was working fine until 11.1.1.7.

  I have done this repeatedly for a long time and wasn't any problem in 11.1.1.7 deployments.

  If something has changed in 12.1.3?

  Even if the AM Service is existing, it is deployed in the same application, it should be able to just crush?

  Here are the results with different versions

  11.1.1.7 - domain of the ADF - Standalone Server - works fine

  11.1.1.7 - SOA - Standalone Server - domain works very well

  12.1.3 - error field - integrated WLS - ADF

  12.1.3 - error field - independent server - SOA

  (The foregoing analysis is based on a simple project ADF as a point of Contact for that matter).

  Real-world scenario

  --------------------

  We need this because ours is a BPM Application and the Composite depends on the AM Service, so the AM service must first deployed in the field of the SOA.

  Then, we make the process as well as the ADF UI for task forms. ADF project depends also on the model project

  We get the error during the deployment of the BPM project and the ADF UI project below.

  Error

  -----

  Unable to deploy EJB: ModelEJB.jar model.common.HRAMServiceBean:

  [EJB:011055] The EJB deployment error ' model.common.HRAMServiceBean (Application: employees, EJBComponent: ModelEJB.jar) ", the JNDI name" HRAMServiceBean #model.common.serviceinterface.HRAMService "is already in use." You must assign another name JNDI in weblogic-ejb-jar deployment descriptor. XML or annotation corresponding to this EJB before it can be deployed.

  [12: 02:07] caused by: java.lang.Throwable: substituted for the missing class [EJB - 11055] the EJB deployment error ' model.common.HRAMServiceBean (Application: employees, EJBComponent: ModelEJB.jar)', the JNDI name "HRAMServiceBean #model.common.serviceinterface.HRAMService" is already in use. You must assign another name JNDI in weblogic-ejb-jar deployment descriptor. XML or annotation corresponding to this EJB before it can be deployed.

  Thanks for any help

  Sameer

  Found a workaround for this problem.

  I don't have to do this in 11.1.1.7 well!

  You don't know if it's the right solution or not!

  If anyone of you knows a better solution, please share.

  I did the 2 following things.

  a. classes of the AM Service Interface of removed files from deployment profile filters

  ViewController project-> properties-> deployment profile--> filegroups--> WEB - INF / classes-> filters

  : Uncheck * Service *. * files (4 - Service.class, Service.wsdl, Service.xsd, ServiceImpl.class)

  b. deleted the deployment profile of library jar ADF for the model project

  Model project-> properties-> deployment

  : Remove the deployment of ADF library jar files profile

  And now I am able to deploy time interface AM Service and application.

  It works for me because I won't need to deploy the AM Service interface again while deploying the process / code of the ADF.

  Since I will deploy the Service Interface of first Business components separately.

  Thanks and greetings

  Sameer

• LSD unexpected closing of the errors after the installation of el capitan

  LSD unexpected closing of the errors after the installation of el capitan

  get a lot of errors after start-up and during work

  This procedure will remove some cache files. The files are generated automatically and do not contain any of your data. Sometimes they can become corrupted and cause problems like yours.

  Please, back up all data.

  Triple-click anywhere in the line of text below on this page to select this option:

  open $TMPDIR..

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing command + V. Depending on the web browser you use, you may need to press the return key. A folder with a long, random name should open. Inside, there should be a subfolder named 'C '. Drag that to the trash.

  Log off or restart the computer. Empty the trash. Test.

• Explorer.EXE error after the restoration of the ERD Commander

  Dell Inspiron B130

  Windows XP Service Pack 2

  Recently performed a HD format and new installation of XP SP2. After I installed all the drivers and others, I checked that the system was operating normally. After a few days of use, Windows Update downloaded Service Pack 3 and asked me to install. I started to install SP3, but at about 50%, the laptop battery is dead at Midway through the installation. I plugged the laptop on the power source and power. I restarted the laptop and XP started only a completely black screen and the white slider. No ALT + CTRL + DEL, desktop icons, etc.

  I rebooted the laptop of ERD Commander, ran the restore system and selected the first available Restore Point. Point of restoration chosen was recorded a few days before, and was the first recorded point after the clean installed XP. I rebooted the XP system. Wallpaper loaded with white cursor, but NO start menu or desktop icon. A message appears saying "Explorer.EXE Application error, press OK to exit the application" or something very similar. Did not write the error code, but can get if necessary. If I press the OK button (which is my only option), there is still no icons on the desktop or the start menu. Only the cursor. No access ALT + CTRL + DELETE or something like that.

  Thinking about completely wipe the system and reinstalls the operating system. Any suggestions before I jump in this solution?

  Explorer.EXE error after the Restore Point of ERD Commander. Dell Inspiron B130. Recently clean installed XP SP2 on laptop. Installation of SP3, to 50%, battery dies the laptop right in the middle of the installation of the SP3 update. Restarted, XP starts with black screen with cursor only. ERD restart order and restore XP to the last known good config (I choose point immediately after XP clean install). Reboot to XP. Now the wallpaper shows as well as the error message saying "Explorer.exe Application error, click OK to exit Explorer" dialog and then I can't access anything. Any ideas?

  Hello

  What is the full and exact error message?

  Step 1: Check if you are able to boot into safe mode without any problem. If you are able to boot into safe mode without any problems then try to perform the clean boot to safe mode. Also disconnect any external devices connected to the computer.

  Reference:
  To start the computer in safe mode
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Step 2: If you are still having the same problem, then you can the steps at the bottom of the article.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

• Windows XP Pro on which I run several programs. After the opening of a few applications, I have this message "not enough memory".

  Hello

  I have a PC running Windows XP Pro on which I run several programs. After the opening of a few applications, I have this message "not enough memory".
  When I have this message, I can't open another application, or those in Windows... I have 2 GB of memory and only 700 MB are used.
  If I open the calculator several times (about 65 times), I have the same result.
  Sometimes, I get no error message, but the application does not open.

  Someone knows why?

  Thank you

  Hello

  You did the chnages on computer before this problem?

  I suggest you go through the steps of the following atrticle.

  "Not enough memory" error message appears when you have a large number of programs running.

  http://support.Microsoft.com/kb/126962

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
  How to back up and restore the registry in Windows.

• The Remote option for matching seems to have disappeared (file/devices/Remote). This discovered after the last updated at 12.4 and Remote app would not work. Suggestions?

  The Remote for iPhone & Remote app matching option seems to have disappeared (file/devices/Remote). This discovered after the last updated at 12.4 and Remote app would not work. Suggestions?

  Fixed. I removed the Remote, reloaded app to my iPhone and then reinstated the info Apple ID and password in the app all connected immediately. The 'Remote' option is not always present under file/devices/Remote, but everything works well at this point.

• "error loading the c:\ProgramFiles\CommonFiles\parentoLogic\UUS2\UUS.dll module is not found" I'm cluelss and generally ignore this message. Should I try hard or leave?

  Original title: error loading the c:\ProgramFiles\CommonFiles\parentoLogic\UUS2\UUS.dll module could not be found

  I'm cluelss and generally ignore this message. Should I try hard or leave?

  Thank you

  This link may be a little more useful:

  http://www.utilitysoftwarereviews.com/how-to-remove-ParetoLogic-uusdll-error-message/

• cRIO 9068 + Scan Engine Support error - even if it is installed on the cRIO, after the deployment of error says his lack

  All,

  I have a cRIO-9068 I try to use the scan mode for. I have intalled all the latest drivers and software as explained. However, when I put my chassis to scan mode, then select deployment all, I get this error on my chassis and all my modules:

  "The current module settings require a NI Scan Engine support on the controller. You can use Measurement & Automation Explorer (MAX) to install a software package recommended NOR-Rio with NI Scan Engine support on the controller. If you installed LabVIEW FPGA, you can use this module with LabVIEW FPGA by adding an element of FPGA target under the chassis and drag and drop the module on the FPGA target element. »

  Everyone knows this or know why labVIEW does not recognize that the software is installed on my cRIO or is it not installed correctly?

  AGJ,

  Thanks for the image. I saw a green arrown beside all my pictures of chip and it seemed that meant that the software wasn't really being installed. I formatted my cRIO and did a custom install. My problem was that I had the two labview 2013 and 2014 installed and the cRIO put conflicting versions of software. After doing a custom installation and choose only the versions of 2014, my picture now looks like yours!

• 401 error after you deploy for stand-alone WLS

  I use JDev 12.1.3 on Windows 7 Pro

  My app has been migrated to 10g, 11 g to 12 c. He had a guarantee of manufacture which has been replaced by ADF security.

  I have it on my integrated WLS but after deployment to standalone WLS I get 401 - error not allowed after connection through OAM.

  I checked the server logs and don't see any error. The sys admin looks at some other newspapers but nothing concrete yet.

  The app has 26 roles of the company and my login has 5 assigned roles. Some business roles have been defined as Active Directory groups. I tried to check if the roles are case sensitive, but who has not found in textbooks again. Ad groups do not match the case of the roles defined in jazn-"Data.xml".

  Any suggestions on what and where to look is greatly appreciated.

  One suggestion is to remove all business roles and try to make it work with a single role. I intend to try this.

  Thanks in advance!

  Dave

  We found that the question. Business roles are case-sensitive. Windows administrator define groups of ads as of breaks. Jazn-"Data.xml", I made the business roles are all uppercase. Evolution of business roles jazn-data to match fixed the issue ad groups.

• Do "request failed: ' error after the workflow run 'assign a state change.

  I try to start a workflow that sends an email once a machine is put into operation.  A simple task, I think.

  I have installation vRA and vRO and am able to supply machines form vRA before making further changes.

  In vRO, I ran the workflow of customization of the vCO 'Install', and the workflow "to assign a workflow of change of State of a master plan and its virtual machines.  After you run the last workflow, I get the error "'request failed: not found YUNoWork and perhaps even deleted before commissioning end." when you try to configure a machine to. "

  The workflow of messaging works on its own, and after the execution of the workflow «Assign a state change...» ", I see not updated the property of 'WFStubBuildingMachine' on the action plan.

  Any comments would be greatly appreciated!

  The issue was that endpoint vRO was not added to the vRA.  After you add endpoint and the taking of the inventory, the problem has been resolved.

• Failed to navigate to the plugin registration page after the deployment of vApp

  Hello, we use Serengeti.8 a bit and today found and want to talk a look at the new package of silly data Extensions.  After I deploy the EGGS, starts the administration server and I can access (ssh/console) very well, but when I hit the web service to save the plugin, I get and error of SSL protocol.

  The URL (examples), I am struck by the documentation are https://ServerName.domain:8080 / plugin    or https://10.20.30.40:8080 / plugin I see in the list of processes that Pier/Java manages port 8080, and when I type the same URL without https, I see an apache/tomcat 404 page?

  Not sure exactly where to go next for troubleshooting plugin registration.

  Hello

  If you want to access the plugin registration page, you must Access the http://: 8080/register-plugin /. There is no SSL on port 8080.
  

  If you need to download the plugin binary package, you must Access the https:///vcplugin/serengeti - plugin.zip.
  

• Independent error after processes deployed in Oracle BPM company

  Hi all.
  
  After you deploy my standalone Oracle BPM business process. Almost everything is ok. But my global activity: Global auto generated the error below:
  
  \#default-1.0GlobalAutomatic' (BP-method GlobalAutomatic). Details: the method "CIL_globalAutomatic" of class "oracle. CadastroContratos.Default_1_0.Instance' cannot be run successfully. Caused by: creating a different engine instance not supported
  
  Someone knows how to fix this?

  Hello

  If you get the error "creating instances of different engine not supported", you might want to double check the logic of your Global Auto when you create the instance. If you have a typing error in the first parameter of the method of Instance.create (), I guess you can get this error.

  1. right mouse click on the process in the project browser that you want to create the instance from your logic-> properties-> note the process id in the only area to read.
  2 use this chain process id in the first parameter and prefix character ' \ '.

  Instance.create (processId : "\SomeProcessName", arguments : args, argumentsSetName : "BeginIn")
  
  

  If you create an instance in the same process, where the overall auto, rather use the logic:

  Instance.create (arguments : args, argumentsSetName : "BeginIn")

  Hope this helps,
  Dan

• Error during the deployment of my program for RTOS

  Hello

  When I want to deply my program in RTOS, the following error message if poster and doesnot allow the deployment successful, finishing Yes alreay s is not possible for me to work with the system.

  I use a host computer, a system in real time with it s RTOS (Labview real-time 8.6) with compact RIO cards and an FPGA card.

  The error is:

  ´´´´´´´´´´´´´´´´

  Deployment niLvFpgaAdjustHostInterfaceError.vi (12,10 K)
  Deployment of (10,27 K) niLvFpgaErrorClusterFromErrorCode.vi
  Deployment nirviErrorClusterFromErrorCode.vi (6.68 K)
  Deployment of pad Whitespace.vi (4.23 K)
  Error error Code.vi (350,11 K) Cluster deployment
  Deployment nirio_WriteBig.vi (23,59 K)
  Deployment nirio_CleanUpAfterDownload.vi (5.82 K)
  Deployment nirio_Download.vi (13.76 K)
  Deployment nirio_DisableInterrupts.vi (12,35 K)
  Deployment nirio_ReadBig.vi (37,66 K)
  Deployment nirio_IsItOKToDownload.vi (6,64 K)
  Deployment nirio_ConfigureBitstreamVersion.vi (13,58 K)
  Deployment nirio_PrepareForDownload.vi (6,64 K)
  Deployment nirio_EnableInterrupts.vi (13,58 K)
  Deployment nirio_Open.vi (13.91 K)
  Deployment nirio_Reset.vi (12,35 K)
  Deployment nirio_DMAStopAll.vi (12.37 K)
  Deployment nirio_ConfigureRegisterAddresses.vi (6.63 K)
  Deployment nirio_DMAReconfigureDriver.vi (17,41 K)
  Deployment nirio_GetCompilationResults.vi (13,61 K)
  Deployment nirio_Close.vi (11.28 K)
  Deployment of nirviIntfClose_PCI - 7813R.vi (85,91 K)
  Deployment of Volts on Temperature.vi (34,01 K)
  Deploy NI 9211 Convert temperature (calibrated) .vi (7,86 K)
  Deployment nirviFillInErrorInfo.vi (8.53 K)
  Deployment nirviReportUnexpectedCaseInternalErrorHelper.vi (5.51 K)
  Deployment .vi (4.98 k) nirviReportUnexpectedCaseInternalError (String)
  Deployment nirviReportUnexpectedCaseInternalError (U32) .vi (5.20 k)
  Deployment of nirviIntfOpen_PCI - 7813R.vi (90,91 K)
  Deployment deployment 2010_Library.lvlib\\192.168.0.19\2010_Library failed (error:-2147467259, LabVIEW: unspecified error (Hex 0x80004005).).
  Completed with errors of deployment

  ´´´´´´´´´´´´´´´´´´´´´´´´´´´´´´

  I made lot´s efforts to solve it, but no results, I am sure that the problem is not because of my program, I checked some differenet programs and the result is the same, I guess something happened to my computer RT or my OTR.

  Thank you in advanced for your help.

  Hola,

  por lo as he visto, el error tienes esta asociado has several things between las that include the version of LabVIEW, the led driver (OR-RIO) y el engine analysis. Para solucionarlo vamos a hacer back try cosas:

  1 - restore todo el software del cRIO.

  Ve Al para ello MAX > Configuration > remote systems > cRIO-9012 > software. Select software con el boton derecho y pincha sober Add/Remove programs. Desinstala todo el software del cRIO. When is reincie, boring the Operación para instalarlo. At the hora of seleccionar el software than dedicate instalar, marca NOR-RIO (my) x.x.x (ano). NO selecciones option OR-RIO x.x.x (my) (ano) with the help of the Scan Engine OR. Reinicia y vuelve a hacer el deploy para ver el error if ha notice.

  2 - Formatear el driver.

  In primer lugar, el Hay mover DIP Switch led driver safe MODE has the position IT. Ve al MAX, select el cRIO-90xx con el boton derecho y Select format the drive. Once formatted el driver y reiniciado, dale the IP y subred used mascara y reinstal todo el software según lo descrito en el paso anterior (Scan SIN motor mount). A hacer el nuevo prueba deploy desde el proyecto.

  NOTE: The change remember IP del cRIO en el arbol projects of LabVIEW.

  Esta forma're como is solucionan los errores del tipo "deployment completed with errors. Suerte con ello!

  Jesus

• Lenovo A1000-camera error after the last update

  Yesterday, I received an update notification. My mistake I didn't take more notes on what was this update, but I have the idea that it was on the build. After that, the camera back fails to start and give an error constant. Someone had a problem simiral or any idea of solution?

  1 million thanks in advance

  Today, after the update, finally the camera work. Thanks, LENOVO.

• I get this error after the last update WindowsUpdate_80200053

  I have the 64 bit version of vist home.

  After the last patch of weeks

  "Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x 64

  "Download size: 25,7 to 82.7 MB.

  I get the error WindowsUpdate_80200053. Also now I can't download active x controls, updated maleware deleting files (Spy bot s & D gives check sum errors), any web site, including the Microsoft Update download (I get warnings of the author is unknown and corrupted file warning.)

  My wife has the 32-bit version and having the same problems.

  Hello Stdonitus,

  Please try the steps, in order to verify if there is no virus or Spyware issues below.

  1. run the Microsoft Windows malicious software removal tool

  2 download, install, update and run: (freeware) SUPERAntispyware and Malwarebytes' Anti-Malware (freeware).

  3. run this analysis online (safe mode with network, if possible):
  http://OneCare.live.com/site/en-us/Center/howsafe.htm

  4 see and follow carefully:
  "Looking for / help with software, spyware software malware and Hijackware.

  If you need help with virus-related issues, contact the Support Services Microsoft product.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  If you need more assistance for the position of virus/worm to the Microsoft Newsgroup - security - virus.
  Through your News Reader:
  News://msnews.Microsoft.com/Microsoft.public.Security.virus
  Via the Web:
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Security.virus

  I hope this helps.

  [If this post can help solve your problem, click on the button 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]