"error application parameters to the driver" HP scanner error

Similar Questions

• Could not load the driver for scanner epson SX215.

  I bought a new Epson printer which has a scanner, the only thing that I'm unable to install is the scanner driver.  I am running windows vista 32 bit.  I tried to download the scanner from Epson and the drive site, but no luck.

  Hi Baily474,

  Thank you for visiting Microsoft Answers.

  (a) what exactly happens when you try to install the drivers scanner? Do you receive an error message?
  (b) do you remember to make changes on the computer prior to this problem?

  I suggest to perform the clean boot and try to install the drivers for the scanner software. It will start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  Note: make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7: http://support.microsoft.com/kb/929135.

  Reference:

  Add or remove a scanner
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-scanner

  The problems of scanning
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-scanning-problems

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Please help me! Anyone who send me up to date of the driver for scanner hp officejet 9120 or any other ground?

  Please help me ! anyone send me as driver for scanner hp officejet 9120 or any other solution to scan only for work, I downloaded driver from site but no job, I HATE the PRODUCT HP. No Solution in forum for me? For Windows XP, Windows Vista 32-bit, win 7

  Hi globalitbwp,

  It is a product of the profit margin. For the best answer to your questions, you need to transfer your question at the following links.

  http://h30499.www3.HP.com/T5/business-support-forums/CT-p/business-support

  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413

  Designjet Questions:
  http://h30499.www3.HP.com/T5/printers-Designjet-large-format/BD-p/BSC-414

• How to: install the driver for scanner "visioneer onetouch 8920 usb" diskless

  Original title: is there a way to get a "driver" for my scanner "visioneer onetouch 8920 usb", other than the dish that comes with it? (I have no disc drive for my netbook)

  I recently got a netbook, the Acer aspireone running windows 7 starter edition, I have a scanner, visioneer onetouch 8920 usb. the netbook I have has no disk drive, I plug the scanner and windows cannot load the driver.  I need help to find how to install the driver, so I can use this scanner.

  Driver download page (but the latest drivers for XP - they will probably not work):
  http://support.Visioneer.com/products/8900/downloads.asp

  Troubleshoot Compatibility

  This can help with some (but not all the) programs/drivers:

  (1) uninstall the program, if it is already installed. Then when install you / reinstall instead of double click on the Setup file, right click and select 'resolve compatibility issues.

  (2) then click on 'Try recommended settings' and in the next window, click on "Start the Program" to install it.

  (3) after he set up see if it works properly. Note: some programs are perhaps not able to run in windows 7.

  More information on how to make older programs in this version of Windows:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

• Cannot find the driver for scanner for Canon Mp480

  Original title - canon Mp480 scaner driver

  Window8 straight Canon MP480 printer, printing market of 8 but used to scanning. He can not find the driver scanner MP480. Uninstall the printer drivers and reloaded

  The same problem.

  David Fields.

  Hello

  The '86' version is for 32-bit Windows 8 and the "64" it is, of course, for 64-bit Windows 8.
  Kind regards
  Carlos

• How can I get my application to use the drive when Reader and Acrobat Standard are installed?

  My 3rd party app is not the default for PDF files. I have installed Adobe reader and Adobe Acrobat standard.  Adobe Reader is defined as the PDF reader by default in Windows XP, but my 3rd party app opens PDFs with Acrobat Standard instead.  Only when I uninstall Acrobat Standard t - it, then open a PDF file with reader. Is there any information I can send to the 3rd party support people who tell me this isn't there problem? According to them, that they use that provides the operating system.

  If you use 10 x or later:

  Choose Preferences > General > select default PDF Manager.

  This will call the installer and you can set the default display.

  Ben

• HP Pavilion g6 has a problem with the driver (s) interfering with Windows mode 'sleep'

  Hello all;

  I have a HP Pavilion g6 (about 4 years) gave me when my daughter bought a new. I had problems with it being slow to start and slow to close (a couple of times that it has initialized to me on the Web). I am running Windows 7 Home Premium 64 - bit SP1. Today, I ran a check on my system in advanced tools, I got this message: "Drivers interfere with Windows out of sleep mode" and this one: "a device driver for a device on your computer is cause of performance degradation. I checked the logs and he suggested I have uninstall these drivers, there are two listed, but they are the same driver. I don't know what to do here. Here are the details that were given:

  ID: 351

  Name: Several vendors AMD Miniport driver

  Publisher: Advanced Micro Devices, Inc.

  Feature: AMD M880G with ATI Mobility Radeon HD 4250

  Date reported: Monday, July 9, 2012 22:20

  Setting time: 1.9 seconds

  Next on the list is EXACTLY the same, except, reported Date: Thursday, June 20, 2013 22:32

  Setting time: 1.8 seconds

  The driver (s) is/is up-to-date. I'm so confused at this point. I think that I need this driver, but that does not mean I have two? Can someone enlighten me? These icons next to them warning, I would try to solve this problem before that I have to keep the PC doctor. Thanks to you all.

  Graphics card drivers are needed for the sleep mode feature. Based on the parameters of the driver, the availability of the mode 'sleep' is decided in Windows. Try reinstalling the drivers, then check: uninstall the drivers, reboot the PC, install the drivers, reboot the PC and then check. If this also fails to solve the problem, try to use a lower version of the drivers, by uninstalling the current version of drivers, restart the PC, install the lower version drivers, reboot the PC and then check.

  Please note that the beta versions are not stable, test rlease only. Beta version of the drivers will always have the latest version, but it's not recommended to use the drivers because it is still in development/testing.

• Driver IVI does not not after the creating application. Get the error 103 "no IVI class session open...» »

  I have an application that is really great to work in Labview and control a bunch of test via the IVI drivers equipment.  I want to build it and make a request.  First of all, I want to just make a request.  Then, I want to do a stand-alone application through the installer.  When I integrate it to an EXE file, then run it on the same machine with installed Labview; It gives me an error:

  "No don't open class IVI session. You must call the class driver VI Initialize before calling a specific driver VI. This error can also occur if the logical name IVI control is set to the IVI evil class. »

  Same computer on which it runs well in Labview.  I don't see any option when generating that look like they have nothing to do with drivers.  Any help?

  He was the driver.  I think I have downloaded the driver at a bad time, when it has been updated.  I got a new today and it works great.

• Message error "another sellers application is controlling the wireless adapter.

  Hello
  I have a satellite A100 309 and I am trying to configure wireless (intel pro wireless 3945 ABG) card using the intel standard configuration tool (windows one does not support it). I have the following error message «another sellers application is controlling the wireless adapter» I guess that there is a conflict with the windows WLAN utility but I don't know how to solve this problem.
  I tried to uninstall and reinstall the driver but no way...
  Someone at - it an idea?
  Thank you very much.
  JF

  I put t know how it works on your device, but I assume that your camera it is preinstalled tool Intel PROSet WLAN. Using this application you can configure WLAN connectivity. Windows operating system also has WLAN configuration settings.

  The fact is that the two who cannot be activated at the same time. If you use Windows settings, you must disable the Intel PROSet. Remember in front of Windows settings, the box is removed.

• Install the driver OR DAQmx 9.7.0 Application Development Support

  Hello

  I'm currently trying to install Labview 2009 (my old copy was lost in case of overheating of the motherboard of my old computer). The installation went very well, I think, and I am able to create new projects etc.

  When I downloaded the driver NOR-DAQmx 9.7 (full installer), I seem to be impossible to install several pieces of software - please see the attached file error. I'm not worried about the track of I/O OR 3.0.2, NI MAX 5.4 or NI Network Browser 5.4.0 because I think higher editions I have are backward compatible.

  With the support for development applications OR DAQmx 9.7.0 however, impossible to install this because of incompatible products. Do you know what kind of products, this error refers to? I am at a loss, because I don't know what the symbol shown in the screenshot (I accessed this window with a custom train installation, but I can't change to a tick/cross).

  Thank you in advance!

  Carl

  Hi James,

  Thanks for responding. I managed to fix the error: I found that the version of NI-VISA installed on my computer was version 5.4, which is not compatible with LabView 2009. As soon as I uninstalled it and instead added version 5.3, I was able to install DAQmx ADE without problem.

  Thank you once again!

  Carl

• TSSTcorp DVD +-error code RW TS - H653G ATA Device 39. I can't reinstall the driver. What can I do? programs and disks will not play.

  DVD drive no longer appears in the list with the C: drive
  drives can run in the drive.

  Hello

  Code 39 means that the driver is corrupted or missing.

  -------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How to remove the error message there is no disc the disc in the Drive\Device\Harddisk1\DR1

  There is an error message which keeps popping up and I push to cancel several times before it will go away however he comes back to the top on my screen at random times. Meesage hpqtra08.exe - no disc, then below it reads "he not there no disc insert disc in the Drive\Device\Harddisk1\DR1.
  Please help me to remove it from my computer!

  Hello lala80,

  Thank you for using Microsoft Vista answers Forum!

  hpqtra08.exe is normally installed as part of the HP all-in-one printer, scanner, driver copy and install the software. It is a non-essential process, and it is at the discretion of the user, whether to disable. If disabled buttons as scan in the 'all-in-one' continues to work. However if you never use it it is safe to disable. It does not work, just the button scan in the multi functional.

  You can disable this feature by using msconfig in Windows.

  Click Start and type msconfig in the search box and press enter

  Click the Start (top row)

  In the list of programs, uncheck hpqtra08.exe

  If please reply and let us know if your problem is resolved or if you need more help

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• DVD RW drive has an error code of registry 19. I can't use the drive and it is not visible as a drive.

  My lite - on dvdrw lh-20a1l ata device does not work.  Device Manager appears with the following text:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  I tried looking for solutions, uninstall driver and reboot, reinstall the software provided with the machine, running regecure software to clean the registry and nothing has solved the problem so far - you have ideas?

  19 code means there is a driver conflict such as two devices attempt to use the same
  resources.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check the cables
  both ends. Remove and replace, do not just tight. For laptops, you can often clean the
  power and data of the contacts with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD &)
  Burn DVDs and CDs and read DVDs). So it is not unusual for 1 or 2 operational parts while
  others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Install the driver error: "insufficient system resources exist to complete the requested service."

  When starting my computer (Dell laptop) Vista, it asks to install the Broadcom Ethernet driver.  I click "locate and install driver software" and it returns the error:
  Install the driver error: "insufficient system resources exist to complete the requested service."

  How can I fix?

  Hello

  ·         What antivirus software or security is installed on your computer?

  ·         Did you recently change on computers such as installing any application?

  Step 1:

  Temporarily try to disable the antivirus on the computer program and check if the problem persists.

  Note: Check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Step 2:

  I also suggest you to download the drivers from the Dell website and check if it helps.

• There is an error produced so that the definition of scanner when scanning through Windows photo gallery properties

  Original title: scanner MEM48U does not not under vista

  Hi, I use MEM48U scanner under xp. The scanner even when it is installed with vista installed and updated the driver. But when tried to browse the Windows Photo Gallery, it is said that a "error occurred when setting the scanner properties. If another program uses Pl waiting and let it fill. »

  Hello components,

  I couldn't even Memorex MEM48U on the site Web of Memorex. It must be abandoned. On other 3rd party sites, I found Windows XP and earlier operating systems drivers.
  If you try to use on a Windows Vista system, it may not work because of the lack of a Windows Vista driver.

  The Windows Vista Compatibility Center does not list this product compatible with Windows Vista. You can try to install in compatibility mode with Windows XP drivers and see if that helps.

  Run the installer in compatibility mode:

  1 right click on the file icon installation.
  2. click on properties > compatibility.
  3. Select the compatibility mode for Windows XP.
  4. click on OK.
  5. run the installation program.

  After installation, run the program in Windows XP compatibility mode by doing the same thing with the installed program.

  I hope this helps.

  Marilyn