error bfff0011 when you try to find '? ' * ' visa

Similar Questions

• Error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer.

  Original title: trying to download

  WinXP SP3, Security Scan run and d/ld: error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer. What to do now would be much appreciated.

  Also have a related problem about MS Maliciouws software removal tool. For download, but read in the KB that: in XP, the vacuum cleaner will remove the malware, but doing so may trigger the File Protection Win with damages to my operating system.  the tool will attempt to repair the damage, but to rehabilitate prior to infection, that I need to insert the CD of Win. As my computer came with Windows preinstalled, I do not have a disk and will not take the risk of damage, that I can't fix. Do I not download or not... ? Another solution... ?  I also fear that this tool could settle into the routine Win Update and need guidance on the prevention of this facility, if possible, or what to do if it cannot be prevented.

  It can have nothing to do with any of the foregoing. " I'm relaying only because it occurred during the same mission of update: had msg of error that Win Firewall has not been set as a default, which reset, but found this hidden file when searching for the Protection of the customer: "Win 32/Hackdef' - it was a config with the extension ini file and was deleted by Scan."

  Thanks a lot for any assistance.

  scate 39

  Hello

  ·         You have Microsoft Security Essentials on your computer?

  If you have windows installed on your computer security essentials, then you will not be able to install Windows defender. Windows Security Essentials has antispyware component installed.

  You get the error because you have installed MS Security Essentials, which has its own function to antimalware. You don't need or want to install Windows Defender, too. Leave MS Security Essentials installed and do not turn it off.

  See also:

  You can turn on or turn on the firewall in Windows XP, please see the link below:

  http://support.Microsoft.com/kb/283673

• I get an error 80070643 when you try to do an update. __

  I get an error 80070643 when you try to do an update. Using Windows 7 Pro. The updates seem to be security patches. Any ideas?

  Hello

  Windows Update error 80070643 can happen for several reasons. The most common cause is a problem with the .NET Framework is installed on the computer. You can also encounter this error when installing updates for Microsoft Office 2003. If you were installing Microsoft Office 2003 updates when you received the error, follow the instructions in the "Microsoft Office 2003" section below. Otherwise, follow the instructions in the "Windows.NET Framework" section in the article below:
  Windows Update error 80070643
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070643

  Also see the article below:
  You receive the error 0 x 643, error code 0 x 80070643 or updates may be offered again when you try to install the .NET Framework updates when you use Windows Update or Microsoft Updates
  http://support.Microsoft.com/kb/976982

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Installation error 112 Setup error message when you try to install the software of the camera Kodak DC200/DC210 Zoom 1995

  Original title: initialization error 112 Setup

  1995 installed Kodak DC200/DC210 Zoom camera software.

  Explanations with the error: decompress the program files not all charges.

  Note: A message previous said that some files can not be installed at this time, because the areas have been used, and records still awaiting loading would be installed when the computer was restarted. (My phrase).

  I may not be a problem, but I don't know how I would like to know whether the error 112 was relative to the previous announcement requirement of a restart or another unrelated with error 112.

  Thank you

  Destry

  PS: You know; In appearance, it could be as silly a question as it seems... But I deal with my share of 'Error' messages, so I'll take the risk that the crazy and ask anyway.

  D.

  Hi Destry,

  1 windows operating system you are using?

  If you use Windows Vista, it seems that the Kodak camera is not compatible with Windows Vista.

  For more information, please visit the following links:

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=software&s=Kodak%20DC200%2f%20DC210

  http://wwwca.kodak.com/global/en/service/digCam/dc210/ownerManual/05inSf.shtml#88364

  You can try to install the device in Windows XP compatibility mode and check.

  Check out the links for more information:

  How to troubleshoot program compatibility issues in Windows Vista

  http://support.Microsoft.com/kb/927386

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Also read the following article:

  Error 112 Setup Installation Error message"when you try to install a program

  http://support.Microsoft.com/kb/326678

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error 0x800704b3 when you try to map a network drive

  Hello

  I have the following error message when you try to map a network drive in my home network:
  "\\iomegahmd cannot be reached" and the error code is 0x800704b3.

  I already looked in the services, and my strong assumption is that the problem is that 'TCP/IP NetBIOS Assistance' service is not statrted and it is disabled. When I try to start it, there is an error message:
  "The system could not find the specified path".

  I also checked the dependency of the 'TCP/IP NetBIOS Assistance' service components:
  Auxiliary function for Winsock driver
  NetBT
  TCP/IP protocol driver
  NetIO-legacy-TDI Support driver
  in the Device Manager is running, but they are all running. Startup is set to 'system '.

  Under the properties of version 4 of TCP/IP Internet of the wireless device, under Advanced-> WINS I ve put enable NetBIOS over TCP/IP, but it helps t is not either.

  What else could try, so that I can map network drives?

  I should also mention, that the problem persists for a few weeks. Before, it was working properly. In addition, on other computers on my network I don't have access to the same network drive problem.

  Thanks in advance,
  Tithe

  > I should also mention that the problem persists for a few weeks. Before, it was working properly.

  It of difficult to say what's wrong in your case. My first idea is: put installation beginning point of time before this error appeared.

  I recommend also to disable all security software and check if you experience the same problem.
  If you still experience the problem, then follow the link to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

• HP 15 F018dx: Error notice when you try to search the drivers + occasional noise from the fan

  Hello. I just did a scan of software on the hp site and it recommended related diagnostic software and I installed it.

  But when I try to do a software scan and the pilot of "search for the updates and recommendations" on the website of HP support for my laptop model, I always have this:

  "HP has encountered an error when trying to analyze your product.

  Please verify that your product is turned on and connected, and then try again in a few minutes.

  Or display all drivers available for your product below. »

  I'm sure that my laptop is up-to-date with software and drivers because my HP support assistant software can't find nothing available, but I'm just curious as to why I get this error on the hp site.

  Another thing.  Very rarely, it looks like one of the fans (or is the hard drive?) in the laptop will be rev suddenley plus enough fort. If I stop the laptop turned off and on again, the fan noise is back to normal - nice and very quiet. Even just quickly put the laptop to sleep and wake it will fan (if that's what it is) back to normal. This loud fan noise maybe happens once every 2 weeks if I average.

  Initially, I thought that this problem of fan noise may be caused or related to a game (asphalt 8) that seems to cause fans to redouble efforts in general (but this casual loud fan noise I'm talking is much stronger than that) when the game is played and the problem seems to occur more frequently with installed. However, I uninstalled it for a few days (although I don't know if I did a reboot after that I uninstalled it) and it arrived this morning after starting with past nothing. I suppose it could still be linked to the game, but I'm not sure. I restarted the laptop and now it is fine.

  As I said that the problem occurs very rarely and most of the time my laptop is very quiet, but still I would like to understand/fix the issue if I could. It of one of the reasons why I was trying just a software/driver scan to see if something is recommended on the site but when I do this pilot analysis I get this error and have always.

  Thanks for any help or suggestion.

  Tom

  Hi @tomstar,

  Thank you for posting. I read your post, and I understand that you received the error message when you try to run a verification of updates and recommended software on the HP Web site. You need not worry since this could be a problem connecting to the HP Web site.

  For the issue of fan, here's a document can help: computers laptops HP-Fan is Noisy and runs constantly, PC is hotter than normal

  Let me know how it goes.

  To say thank you, click on the "thumbs-up". Accept the post as a solution, if your problem solved, so that other people have the same problem can see it.

  Kind regards

• 490 error code when you try to install service pack 2 with vista

  I have service pack 1 installed on my computer but I get an error message when you try to install service pack 2

  blztcj,
  Take a look at this article and try the steps inside:
  Troubleshooting Vista Service Pack installation issues

  Post back with the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error ox80072751 when you try to update to BioShock 2

  Error ox80072751 when you try to update of BioShock 2 (Steam bought)

  I tried to install the most recent GFWL, PC rebooted, signed in to GFWL with old or newly created account.

  Installed all the updates of Windows currently needed.  Tried again above.

  Disabled network manager, tried again.

  Nothing works.

  Using W7 64 bit

  Hello
   
  We checked for error code and couldn't find any information for Windows.
   
  This problem has been resolved by downloading and installing the patch from the game maker website.
  Because you bought steam bioshock2, you will need to get the patch from them and install it.
   
  There must be some specific troubleshooting steps for this error code. For the best options for technical support, please post your query on the game manufacturer's website: http://www.2kgames.com/#/index.php?p=support
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• I get error 800b0100 when you try to install the KB961371__ update

  I have trouble to install udate KB961371.

  Quote your full version of Windows (for example, WinXP SP3;) Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  See...

  Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: "0x800B0100.
  http://support.Microsoft.com/kb/956702

  See also the section "How to get help" of http://support.microsoft.com/kb/961371

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Consumer Security Support homepage
  https://consumersecuritysupport.Microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I get an Error Message When you try to send emails. "some errors occurred while processing the requested tasks. Please see the list of errors below for more details". __

  I get an Error Message When you try to send emails. "some errors occurred while processing the requested tasks. Please see the list of errors below for more details".

  But it sends the message anyway... multiple copies, and she also is put in the "Outbox" in Outlook Express as if it is not sent.

  To stop the email to be sent repeatedly to the recipient, I erase it from the "Outbox" but a) you don't know if they really got it) b it is embarrassing for the receiver c) is this a bug I can fix it?

  Thanks for any help.

  You have a corruption of dbx file easily corrected.

  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

  Compact often as specified above.

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• I get this error 0xc0070652 when you try to install a software

  I get this error 0xc0070652 when you try to install a software, said a facility is underway and should be completed before the new installation is allowed. There is no other facility that I can tell, there may be a stuck somewhere. Please help, thanks in advance...

  You can check the registry key below all pending installs.

  Check the following registry key and clean all entries in the key, you will find:

  Go to the ORB start, type regedit and select access.
  If you receive the user account control dialog box that says, you want the following program to make changes to the computer?, click Yes.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Highlight: HKEY_LOCAL_MACHINE \Software\Microsoft\Windows\CurrentVersion\Installer\InProgress

  Check the following registry key and clean all entries in the key, you will find:

  HKEY_LOCAL_MACHINE \System\CurrentControlSet\Control\Session Manager\PendingFileRenameOperations

  Thank you

  Marilyn

• Unable to get Windows Mail to send or receive. Get this message error code when you try to send: account: "Windows Mail".

  original title: Windows Mail

  Unable to get windows mail to send or receive.  Get this message error code when you try to send:

  Account: 'Windows Mail', server: 'pop.emailsrvr.com', Protocol: POP3, server response: '.', Port: 110, secure (SSL): no, error number: 0x800CCC18
  0x800cc0E error code received when you configure the ACCT.     POP3 and SMTP servers are: pop3.email.msn.com.  SMTP.email.msn.com.
  To find these server addresses, took some time to locate.  After locating and entering, using authentication
  sign username and password, he kept sign asking repeatedly.
  Any help on these questions would be appreciated.

  POP3 and SMTP servers are: pop3.email.msn.com.  SMTP.email.msn.com.

  To find these server addresses, took some time to locate.

  POP3/SMTP settings for an MSN e-mail account are on this page. That's more than three years, Hotmail includes the MSN e-mail accounts.

  Hotmail has its own support at the Windows Live Solution Centerforums. Please address any other question you may have on one of the forums on the right side of this page.

  Noel

• Error 1068 when you try to start the WIA service after the installation of the W7 SP1

  Original title; Error 1068 when you try to start the WIA service after the installation of the W7 SP1. The scaner to my Epson Workforce 633 all-in-One printer does not work after that.

  SCANeR to my Epson Workforce 633 all-in-One printer does not work after the installation of the W7 SP1. I contacted Epson support and they told me I had to contact MS support to get help this isue. The problem is that something is not letting the WIA service to start and I am getting error 1068 when you try to start the WIA service.

  Hello

  Method 1: Try to uninstall and reinstall Epson drivers and related software.

  Visit our articles to do the same below:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  Method 2: Also scan SFC (System File Checker) on the computer.
   http://support.Microsoft.com/kb/929833

  Hope this information helps.

• I have an Airport Express, which gives an unexpected error message when you try to connect to an existing network of WEP.  Any ideas.  Tried the factory returned. He was knocked offline when someone dug into the telco cables.

  I have an Airport Express, which gives an unexpected error message when you try to connect to a router WEP (Verizon) existing iOS9.3.2

  It flashes orange, but can not be reconnected to the router or to the title of the Setup Assistant or Airport utility.  Is there a way to reconnect to WIFI or should I bite the bullet and connect via Cat5e and be done with it.  My VPN works much better without AirPort Express connected.

  Sorry, but there is no WEP settings AirPort Utility on the iPhone or iPad, or any Mac version of AirPort Utility which was used for the last 4 years or so.

  If you have an older Mac still running AirPort 5.x utility or a PC with the AirPort for Windows utility installed on the device, the WEP settings that could be used to get the Express to connect to a WEP network there.

  As you know, WEP has not been secured for a number of years, and there are any number of free utilities available on the Internet, which is crack a WEP network in a few seconds. Thus, all those who want to be on your network will not have problems to do very quickly.

  But it's your call.

• Just recently, I receive the following error message when you try to access the web sites. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. There is a problem with some plugin?

  Just recently, I receive the following error message when you try to access the web sites. I use Firefox browser version 10.0.2. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" as the web site page is displayed in the browser winder. So, I have to click ok. Any link/website I go to what happens. There is a problem with some plugin?

  It is only a problem for the SiteAdvisor users who are still on 3.4. This problem is resolved in the latest version of SiteAdvisor, which is 3.4.1.195. Go to http://siteadvisor.com and click on download. This will fix the problem.

  Meanwhile, SiteAdvisor team will push down a JS update in the coming days 1-2 to automatically resolve this problem in version 3.4.