Error BTSync after Upggrade firmware 6.5.0

Similar Questions

• WRT160N... password does not work to get back in line to restore settings after update firmware.

  The reason for the update of the firmware has been that the router would constantly disconnect, even if the ISP has been connected.  I was hoping that would solve the problem.

  Failed to connect to router just after the firmware has been updated successfully (what said on the screen), but could not use "continue" to to precede.

  Because the screen indicates the success, I closed the browser and reset the default router.

  The next step in the process is to access the configuration page of the router web-based and restore my settings.

  The PROBLEM... Now my password does not work to allow me access to the page of the router's web-based Setup to restore the settings.

  I have an account, but nowhere in the account he mentions the password settings.

  When you reset the default router, the router returns to a cache of user name and a password of 'admin' (without the quotes).  Please try to connect to your router.

  If you continue to have problems, then you must try to reset the router by default.

  To reset your router by default, follow these steps:

  (1) turn off all computers, the router and the modem and disconnect from the wall.
  (2) disconnect all the wires of the router.
  (3) turn on the router and let it start up completely (1-2 minutes).
  (4) press in and hold the reset for 30 seconds button, then release it, then let the router reset and restart (2-3 minutes).
  (5) turn the router.
  (6) connect a computer cable to port 1 of the router (NOT to the internet port).
  (7) turn on the router and let it start up completely (1-2 minutes).
  (8) the power of the computer (if the computer has a wireless card, make sure it's off).
  (9) try ping on the router. To do this, click the 'Start' button > all programs > Accessories > command prompt. A black DOS window will appear. Enter the following text: "ping 192.168.1.1" (without the quotes) and press the Enter key. You will see 3 or 4 lines that begin with ' response to... ". "or"Request timed out". If you see "reply from...". ", your computer has found your router.
  (10) open your browser and point it to 192.168.1.1. This will take you to the login page of your router. Leave the user name blank and in the password field, enter "admin" (without the quotes). This will take you to your router configuration page. Note the version number of your firmware (usually found near upper right corner of the screen). Exit your browser.

  If you get this day without problem, try the Setup disk (or configure the router manually, if you prefer) and see if you can get your work and router configuration.

  If you can not ' response to... ". "in step 9 above, your router is probably dead. A report with this problem

  If you get a response in step 9, but cannot complete step 10, is that your router is dead or the firmware is damaged. Related to this issue.

  If you need additional assistance, please indicate your ISP, the make and model of your modem, the firmware version of your router and the results of steps 9 and 10. In addition, if you receive error messages, copy them exactly, and report.

  Please let me know how things turn out for you.

• "404 - page not found" error message after downloading and installing Firefox 15

  "404 Page not found" error message after you download the latest version of Firefox.

  It is sometimes the result of a software firewall that protects you against modified applications. Or it could be something else. Can you look at this article and see if it helps: Firefox can not load websites, but can other browsers.

• OfficeJet Pro 8500 has ceased to print after update firmware for LRP1FN1231AR

  I've updated the firmware in my work perfectly 8500 has and now the printer will not finish a print job after few minutes of no activity.  The fax is the same thing.  This all started AFTER the firmware upgrade completed successfully!  Now I'm stuck with an anchor of a printer.  Looks like it prints print and fax jobs in the buffer if I open and close the door of ink cartrage.  The unit currently cartrages to ink HP not installed and those that have been installed at the time of the upgrade.  I got a message warrning that using ink not HP may void the warranty.  Is it a time bomb that HP put in the new firmware to cause me to have to return a new printer?  All possible solutions?

  I installed an old set of "Genuine" HP cartrages that have been spent and the printer seems to work now.  I stayed alive all night without the message "printing" terminal hidious.  Very disappointed that the update didn't warn me on this subject and now I need to buy all the new ink cartrages.

• PCI-MIO-16-4 error 200329 after running a while

  I use a card PCI-MIO-16-4 for a combination signal generator and an oscilloscope for a student laboratory exercise.  I use ao0 to generate a variable frequency waveform (defined by the controls on the front panel) and ai6 to acquire the resulting signal.  To experience the two must be synchronized for the acquisition of scope starts simultaneously with the beginning of a generation analog.  Synchronization is performed using ctr0 in generation mode and set the same frequency as the analog output.  The meter output through rtsi0 for relaxation of beginning on the analog input.

  The application seems to work very well until the output frequency is changed "too quickly" while the analog input section will post 200329-error of the vi DAXmx Start Task.  After receiving this error, the computer must be restarted to resume operation of the Commission - even MAX panels will be simply repeat the same mistake on the analog inputs up to a reboot.

  If have tried the application on a Board of the USB-6221 BNC (using pfi9 to route the trigger start signal) and were unable to make the same error.

  It is on a computer running window 7 Enterprise sp1 with LabVIEW 2012 (32-bit) sp1 with the f5 patch installed.  DAQmx 9.6.2 has been installed for the original tests for both cards.  Installation DAQmx 9.8.0f0 does not change the behavior.  The PCI-MIO-16-4 passed the tests of the DAQ Diagnostic Utility 2.1.

  I tried using rtsi6 and rtsi0 as the routing without behavior change trigger signal.

  I have attached a stripped down version of the application that is always the problem.  There are 7 required files so that they are in a single .zip file.  With the frequency setting knob, it takes usually just a couple of "twists and turns" on the controller to cause the entry to the analog error.  The output of the DAQ Diagnostic Utility is also attached.

  Thanks for advice on what I can hurt in this application.

  The solution to the error:

  First attempt, the application had two structures of parallel events that have allowed the frequency be changed while there was also an acquisition that occur.  Modified to have a structure of single event so that the frequency changes may occur between acquisitions (risk of conflict Access Board?).  This made no difference to the error.  He would always get error-200329 after that the frequency has been changed several times.

  Discovered that just reset the jury would clear the error.  Considered catch the error and reset the jury whenever it happened.  Prefer something that will prevent the error from happening at all.

  Final solution was to erase the data acquisition task after each acquisition scan and reset.  It was only necessary erase the tasks of acquisition and not production jobs or a timer.  After several hours of change of frequency, amplitude and phase, no error had occurred.  I think that it has cured the problem.

  I now have two different copies of the application.  One is for use with the PCI-MIO-16-4 (new one that clears the task of acquisition after every scan) and one for use with the NI USB-6221, who uses still two parallel event structures, does never erase the task of acquiring and never shows the error when it is used with anything other than the PCI-MIO-16-4.

• I received this error message after you remove the address something about Cloud.app

  I received this error message after you remove the address something Cloud.app.   Can you tell me how to fix this error message. "  '/'  "  ?

  Hello Phyllis,

  When you receive this error now?

  Let's run boot minimum troubleshooting to find the cause.

  Windows XP:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  Windows Vista and Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Please note that after refine us the cause, it is important that we return to a normal startup and manually delete the startup program.

  Best regards

  Matthew_Ha

• I have an error message after an update, WindowsUpdate_0000737D""WindowsUpdate_dt000, can someone please help, my computer installs updates whenever I stop. "

  I have an error message after an update, WindowsUpdate_0000737D""WindowsUpdate_dt000, can someone please help, my computer installs updates whenever I stop. "

  @cinziac (who has not declared his complete version of Windows):

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• Error message after extraction of sp3 for XP Pro: System cannot find the path specified.

  XP Professional installation error message after extraction of sp3 on hard disk, message: System cannot find the path specified.
  Whenever I try to install, I get the same message. How can I fix it? I can't use the "fix" without sp3 installed.
  Any help would be greatly appreciated!

  "system cannot find the path specified".

  A google search revealed this can help...
  http://aumha.NET/viewtopic.php?f=62&t=33406

  Also, what is your level of service current pack (start-run then type Winver, and then press enter)? If you have no current service pack level, you must first install SP2. Unfortunately, the link for that

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=28

  doesn't seem to work today. If all goes well he'll be reinstated soon.

  Tricky

• I am not able to connect on all sites with my system XP displays a 404 error code after a Trojan horse (trojan. ADH.2) was found and quarantined by norton.

  Hello, I'm not able to get online at all sites with my system XP displays a 404 error code after a Trojan horse (trojan. ADH.2) was found and quarantined by norton. The system is slow or bottleneck at all, but I think that the registry has taken hostage by this Trojan horse. I tried to run Add ons, reset IE8, reinstall IE8 offline, I tried different users, tried to run a different browser (firefox). I can ping all the sites in the cmd prompt, but have no luck connection in the browser. A ran mohamed, superspyware, spybot. Is that what I can do without having to re install? I don't have the OS XP Media.

  original title: error 404 on all sites

  I wouldn't worry IPSec.

  I think the most important things to address are:
  1 search for rootkits.
  2 empty the DNS.
  3 reset the proxy settings.
  4 reset the TCP/IP and Winsock settings.
  Good luck!

• I received an error message after installation encyclopedia British and this application cannot be open.showing the "Startup MFC application has stopped working". How can I solve this problem?

  I received an error message after the installation of Encyclopedia Britannica and this application cannot be open.showing the "Startup MFC application has stopped working". How can I fix this?

  Hello

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe and then by selecting run as administrator to install it

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  ____________________________________________________________

  and read this information MS, too

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-the-program-compatibility-Wizard

• error code after you download security ca roadrunner (application error reads cannot read memory) and some numbers...

  error code after you download security ca roadrunner (application error reads cannot read memory) and some numbers...

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Crazy error message after startup

  I see this error message after the computer is booting up:

  error: Server system.web.services.protocols.soapexception could not process the request not able to connect, please check your credentials and try again

  not sure if it relates to the point of service from Verizon or Verizon internet security suite powered by Mcafee.

  We never seen it before?

  Has anyone found a sollution to this problem? I get the same message. I restart my computer in safe mode, and it does not appear. I wonder if it is a virus. Any help will be appreciated.

• USB not recognized problem, it worked fine before, then update iOS to 6 is out, and when I plugged it in iPad after update, started having error shortly after.

  I conducted an audit of file, the disk check, you click on uninstall the driver in Device Manager and went as far as reinstalling Windows (I sell the laptop) and still have the error! Someone help me please correct.

  It was working fine before, then update iOS to 6 came out, and when I plugged it in iPad after update, started having error shortly after. I tried to install and unistaling software from apple, and as I said, I even reinstalled windows. always error.

  Hello

  Method 1:

  I suggest you to run the fixit from the link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems

  Method 2:

  Step 1:

  In Device Manager, check whether the USB controller appears as working properly or have a yellow on her exclamation when the device is connected. Look for error codes as well.

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  Step 2:

  Check if the device is recognized on another computer.

  Hope this information is useful.

• Acrobat pro v12 DC closes with error "closing" after its launch.

  Acrobat pro v12 DC closes with error "closing" after its launch. Reinstalled and still got the error.

  Error 1402. Error 1406. Adobe Acrobat, Reader

• I can't not persistent install the latest update of Adobe Audition. It is not a CC version but came on disc in CS6. I constantly get this error message after you download the update that does not install: U43M1D207. What are the steps to complete t

  I can't not persistent install the latest update of Adobe Audition. It is not a CC version but came on disc in CS6. I constantly get this error message after you download the update that does not install: U43M1D207. What are the steps to perform this installation?

  Adobe Audition: For Macintosh