Error: 'capture string not in correct format' when tried to run Microsoft Fix it

Similar Questions

• Error: "Windows could not complete the format" when you try to write to blank DVDs

  I get this error when you try to copy files to a blank DVD.  I am trying to drag and drop files into the dvd player and after a small roar, the dvd ram drive stops and the error message.  Then the drive no longer recognizes blank dvd inside.  I am running Vista 32 bit and my dvd ram is a matshita dvd - ram uj880as ata.  I tried to switch to the microsoft 'FixIt' site, but the problem is not resolved.  I think that the report mentioned that the reader could recognize not writable or something to that extent.  The player can play DVDs fine, however.  Is there a solution to this problem by replacing the dvd ram drive?

  Hello

  Have you tried to close all programs and then insert the disc to see what is happening? Try a slower
  speed or mastered format. Have you added any burning new software lately - these tend to compete
  for resources and can interfere with each other.

  Should which CD or DVD format I use?
  http://Windows.Microsoft.com/en-us/Windows-Vista/which-CD-or-DVD-format-should-I-use

  ====================================

  You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
  Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  CD have a tolerance + - and you can write on the outside edge.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -----------------------------------------------------------------------

  Try this troubleshooting:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Many web sites does not not with correct format minus 8.0

  Many web sites does not not with correct format minus 8.0 but work fine with IE. At first glance, my internet connection has problems because the text was load but the format and images had problems, but not the internet connection. Example is www.msnbc.com or www.blueovalnews.com

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• code 646 error when trying to install microsoft 9

  When trying to install microsoft 9

  See: http://support.microsoft.com/kb/2258121

  TaurArian [MVP] 2005-2011 - Update Services

• Cannot run Microsoft Fix It for Program_Install_and_Uninstall error: ' we're sorry, but we encountered an unexpected problem, one or several upload components and can not run...»

  Original title: cannot run Microsoft Fix It to Program_Install_and_Uninstall

  When I run Microsoft Fix It for Program_Install_and_Uninstall, I get "we're sorry, but we encountered an unexpected problem, one or several upload components and cannot run the troubleshooter now...» »

  Hello

  Why you try to run the fix it tool?

  Post to fix any problem with Microsoft tool in Microsoft Fix it Center forums.
  http://social.Microsoft.com/forums/en-us/category/msftsupporttools

• Cannot run Microsoft FIXIT error: "an unexpected error has occurred.

  Title: Microsoft Fix it fails

  Hello

  Whenever I try to run Microsoft Fix it, I get an error message saying something like "an unexpected error has occurred.  The fix that it Wizard cannot continue. "I used to see if the Fix, it would help solve the problem of update that take place on this Dell Inspiron laptop running Windows Vista 32-bit Service Pack 1 with Norton 360.  I thought that I had made progress on the issue of the update, but now they are all fail during installation, including Service Pack 2.
  The Dell PC Checkup shows as operating without any problems portable equipment.
  Thanks for any help that can be offered.
  Kind regards
  Roxy111

  Hello

  -What is the FIXIT you have tried to solve this problem?
  -Do you have problems with the installation of the Windows updates?
  -You receive an error message while trying to install updates?
  -You are aware of any changes made on the computer before this problem?
   
  Step 1: I suggest you to see the link below and cehck if the problem persists.
  FIXIT solution Center
  http://fixitcenter.support.Microsoft.com/portal/FindSolutions
   
  Step 2: File system (CFS) Checker

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  (a) click Startand type cmd in the box start the search.

  (b) right click on cmd in the programs list and then click run as administrator.

  If you are prompted for an administrator password or confirmation, type your password or click on continue

  (c) for the command prompts, the following line and press ENTER:

  sfc/scannow

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7?

  http://support.Microsoft.com/kb/929833

   
  Step 3: Clean boot

  I suggest to maintain the computer in clean boot mode and check if the problem still persists. A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, see the link to start to set up the computer in normal clean startup mode.

  For reference:
  Information about Service Pack 2 for Windows Vista and Windows Server 2008
  http://support.Microsoft.com/kb/948465
   
  Hope this information helps.

• When I run Microsoft Fix it, it says I have no firewall; so I see Security Essentials and everything is GREEN. Why is this?

  When I run Microsoft Fix it, it says I have no firewall; so I see Security Essentials and everything is GREEN. Why is this?

  * original title - I have Microsoft Security Essentials? *

  Good news is THAT MSE is showing protection is enabled and given that you do not receive notification of Security Center advising the firewall is not enabled it can be assumed that it is enabled. Bad news is that I don't have an answer. You have any other real time protection(Avast, AVG, etc.) currently installed? What, if any, previous protection in real time of programs have been installed and they did include a firewall? You made using tools and methods to remove properly uninstall completely?

  Since it is a problem Microsoft Fix it I suggest you consider posting your question in the fix it Center Forum.

  Microsoft Fix it Center Forum
  http://social.Microsoft.com/forums/en-us/fixitcenter/threads

  You can also consider opening a Support box.

  Support-contact us
  http://support.Microsoft.com/contactus#TAB0

  Attach to e-mail
  E-mail address is removed from the privacy *.

  I hope this helps.

• error 14001 itunes not installed correctly, get the Assembly error when you try to reinstall

  installation iTune error

  I tried to install iTunes for the past few days, I have an old one that I have to adjust that give me and error when you try to open "itunes is not installed correctly. "Please re install itunes error 7 (windows error 14001)" so I try to install the new I adjust 10.5 and I get this message

  "a mistake occrred in the installation of the Assembly microsoft.vc80.crt, type is"win32", version +"8.0.50727.6195".publickeytoken ="1fc8b3b9a1e18e3b".
  processorArchitecture = "x 86". See Help and support for more information. HERSULT:0X800736FD ".
  I get very frustrated because I need I tunes to get into my new i pod. I looked for solutions on apple, but nothing came.
  also, I get this error when I try to install the new QuickTime 7.7.1, tried to uninstall itune and whatever it takes like I said here: http://support.apple.com/kb/ht1925, but still, I get the same error when trying to install everything back. I read, you can resolve this error by installing each update Windows but my windows updates also give me an error when I check updates saying ' an error occurred while searching for new updates for your computer or errors found: update code 80080005 windows has encountered an unknown error. " Can someone help me please. I get very frustrated by that. Thanks in advance

  Hello

  I suggest you to return these KB articles and check if it helps.

  http://support.Apple.com/kb/TS3074

  http://support.Apple.com/kb/TS3074

• Error: ' ATL. DLL was not found"when trying to run any application.

  Original title: ATL. DLL was not found.

  I can't run applications in my pc someone in my house could not get into the computer and changed operating system to windows xp, which allows to be decommissioning of this t. Now, I get this message when I try to run an application: the application failed, because ATL DLL is not found, re - install the applicationmight solve the problem, but I get this message after you have re-installed and I don't know what else to do. Slow computer charges and freezing, something he has never done before. Same IE you have a problem, the only thing that works well, it is the remote assistant who helped me to get here and to him intermet, actually all of this with the dll thing started after I deleted the firefox browser because it froze the computer. Unable to restore my recovery utility, I tried a TI ran and told me it is impossible to get it back before I uninstalled firefox.

  Unfortunately, the support engineer technical 'expert' who is hired by the tips from Microsoft to run sfc/scannow will not help you.

  I would say that, as usual, the technical support engineer has not bothered to reproduce the problem and tried their own suggestion.

  If the atl.dll file is missing, sfc/scannow will launch but it does not work.

  It's just another wild goose chaseSupport Engineer.

  A lot of things will not work if the atl.dll file are missing.  System Restore will not work, Event Viewer do not work, you will not be able to get on the Internet, etc., until the file has been replaced.

  You try to run the system restore, you see the following message is displayed:

  Rstrui.exe - Unable to locate component
  The application has failed to start because ATL DLL not found.  Reinstalling the application may fix this problem.

  Try to open the event viewer, you see a message like this:

  MMC could not create the snap.
  MMC could not create the snap.  The snap-in may not be installed correctly.

  Name: Event Viewer
  CLSID: {975797FC-4E2A-11D0-B702-00C04FD8DBF7}

  Running sfc/scannow will be launched, but it will not run if the ATL DLL file is missing and you will see events like this in the event log (when you arrive, it works again):

  The server {8BC3F05E-D86B-11D0-A075-00C04FB68820} is not registered with DCOM within the required time.

  You can't get on the Internet using any browser.

  You have to somehow replace the missing or damaged file.

  The file might really be missing if he has been quarantined (actually deleted) by your antivirus not specified.  If the file is simply missing, you can just replace it and then later determine what happened to the file and decide what to do about this.

  You can search Windows on your system for ATL DLL and replace the missing file.

  THE ATL. DLL file must be in this folder (assuming that Windows is installed on your C drive):

  c:\Windows\System32

  Check and see if you can find the ATL DLL file in this folder, or if he's really missing, you will need to replace it:

  Depending on what applications you have installed, when you search for your ATL DLL system, you can find ATL DLL in several places on your system.  You must be sure get you the correct that belongs in c:\windows\system32.

  The most likely place to find a good copy of Atlant. DLL will be in one of these folders:

  c:\Windows\System32\dllcache
  c:\windows\system32\ServicePackFiles\i386

  Locate a copy of the correct Atlant. DLL from the file in one of these folders and copy/paste in the folder c:\windows\system32.

  Answered in the affirmative if invited to replace the existing file.

  There is a copy of the file on my SkyDrive, you can download a system not affiliated and then copy the file to a Flash DRIVE or a floppy disk and apply it on the afflicted system c:\windows\system32 folder.  Here's how:

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called atl when the name of the file should really be called atl.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

• When I run microsoft fix it I get error saying that the Recycle Bin is corrupted and not to set

  folders and programs disappear or stop work system restore will not work

  Hello

  ·        What Microsoft Fix it are you trying to run on the system and why you try to run the patch on the system?

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  ·        What is the exact error that you are experiencing?

  I suggest you follow the steps mentioned below.

  Method 1:

  I suggest you follow the steps mentioned in the article below and let us know if the problem is resolved.

  Error message: the trash on C:\ Is damaged or invalid. Don't you want to empty the Recycle Bin for this...

  http://support.Microsoft.com/kb/297760

  Method 2:

  Apart from that, I suggest you check in the clean boot state, if the problem persists. Follow the steps mentioned in the article below.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Method 3:

  I suggest to run a SFC (System File Checker) scan on the system and then check if the problem is resolved.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Webcam USB 2.0 on my laptop with windows vista error device does not work correctly

  Original title:

  I just plugged a usb2.0 webcam on my laptop with windows vista. It is loaded ok, but the device manager says that the device does not work correctly. Any ideas please.

  I just got a webcam via ebay and plugged into my laptop. I'm working on windows vista. He finds and load device software right away, no problem. But I can't work. go into my device manager it tells me that the device does not work correctly. Any ideas please.

  Hi Matthew,

  The first thing I would try is to connect the webcam to another computer to make sure that the webcam is not defective.

  Now, check out these links and return to the State of the question.

  When hardware installed in or attached to a computer doesn't work properly, it is often because of a driver problem.

  Here are a few common problems with drivers and the means to solve them.

  See the following link for more information:

  Tips for solving common driver problems

  Also check out the following link and run the fixit available.

  Hardware devices do not work or are not detected in Windows

  The fixit diagnose and solve problems with the equipment. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

• "" Unknown device is error message "is not a driver" when you run Microsoft Fixit Center

  Original title: driver problem

  When microsoft fixit center running, I get a message that says ' unknown device is not a driver.  What should I do?

  Hello Stephanie,.

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, it seems that you are having problems with Microsoft Fixit Center. "As I understand it, you get an error message" unknown device is not a driver.

  I need to ask you some questions to help you better.

  1. why you use Microsoft Fixit Center?

  2 do you have connected a device to the computer apart from keyboard and mouse?

  Reply with answers to help you in a better way.

• Windows service install is not installed correctly shows when you try to download. I could not even download / enable microsoft Fix to solve the problem

  After using a utility program to defrag and solve other problems and registry, I started to have problems. All started when I tried to download the new OS 2.0 for my playbook. Then, when I tried to find what has increased, I tried to make a different download and when I went to run it, a message appeared, Windows install is not properly installed. When I tried to do a windows system recovery to get back 2 full days, he started the process and then an error message appeared and was unable to perform the restore. I went to Microsoft to get object Fix solution and downloaded but cannot run. All the ideas and where can I find the real file name in an attempt to do a cover of just him.

  Saturday, June 23, 2012 23:37:07 + 0000, DTkareboutkatz wrote:

  After using a utility program to defrag and solve other problems and registry, I started to have problems.

  What program did you use? Defragment is OK, but when you say "fix."
  Register' looks like you used a registry cleaner.

  If you did, this is definitely what caused your problems. They
  should never be used.

  Registry cleaning programs are all snake oil. Cleaning of the
  registration is not necessary and is dangerous. Let alone register and
  do not use any registry cleaner. Despite what many people think, and
  What software record cleaning suppliers are trying to convince you,
  have unused registry entries is not really make you hurt.
  The risk of a serious problem caused by a registry cleaner by mistake
  delete an entry you need is much greater than any potential benefit
  It can have.
  Read http://www.edbott.com/weblog/archives/000643.html
  and http://aumha.net/viewtopic.php?t=28099
  and also
  http://blogs.technet.com/markrussinovich/Archive/2005/10/02/registry-junk-a-Windows-fact-of-life.aspx

  Let me stress that neither me nor anyone else who warns the
  use of registry cleaners never said that they always cause
  problems. If they have always caused problems, they would disappear from
  the market almost immediately. Many people have used a registry
  cleaner and never had a problem with it.

  The problem with a registry cleaner is that it carries with it
  the risk of a significant problem. And since there is no
  benefits of using a registry cleaner, running that risk is a very bad
  good deal.

  Ken Blake, Microsoft MVP

• Error: It's not the correct recovery disks.

  I replace the hard drive in the pavilion a6432f pc desktop by using the recovery cd and keep the error message: these are not the correct recovery disks. Ive checked that the AUCTION # s match of the cd recovery with SUBMISSION # on the bottom of my pc. The only option Ive been able to find online is also install another operating system.

   

  I have a problem with that. The only other operating system, I have Windows XP and the pavilion a6432f supports Windows Vista, so there is no drivers for some of the critical components of the system.

   

  Y at - there someone who can help me with this problem. I have not either the option of performing from the hard drive. The previous hard drive has failed and been replaced since the mfg'r. That's why I'm using the recovery cd

  It is usually a problem with the BIOS that is causing the problem.  Recovery checks the BIOS to determine the model and other info before it will install to prevent recovery used on discs machine no HP or on the wrong model of HP machine.

  It usually takes HP service to insert the correct information in the BIOS.

  Have you ever used before recovery disks?

  Any material changes other than the new HDD machine?

  Windows 7 would be a nice update to the machine. Win 7 has an abundance of builtin driver support, and if necessary most Vista drivers work in Windows 7.

• Not able to install any updates for my computer Error 1606 could not access network location % APPDATA%\. How can I fix it?

  I can't install any updates for my computer at all, even the window updates is one of the many error messages I receive, Error 1606 could access the location %APPDATA%\ network. How can I fix it?

  Hello

  This problem occurs because there is incorrect entries in the Shell folder of the user who is logged on to Microsoft Windows. When Windows Installer goes to the sale of Shell folder of the user who is logged on to the computer, Windows Installer cannot locate the correct entry. The solution is inhttp://support.microsoft.com/default.aspx/kb/886549.

  The steps to correct this problem involve editing the Windows registry.

  WARNING:

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk. I suggest that you first back up your registry as follows: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry.

  Here are the steps to fix it.

  Step 1:

  a. Click Start, click Run, type ""regedit ' in the Open box, and then click OK. "

  b. find the following registry key:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell dossiers\

  c. remove the entries that show the path that is listed in the error message.

  Step 2:

  886549 KB http://support.microsoft.com/default.aspx/kb/886549:

  Open Regedit a. once again. In the left pane, click User Shell Folders, point to new, click expandable string value.

  b. type the value name that you want to restore (AppData), and then press ENTER.

  c. right-click on this value, click modify, type the value in the value data for the value name box and then click OK. The value data must be: % USERPROFILE%\AppData\Roaming.

  Step 8 KB 886549 suggests that you also check the values in HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders. However, by fixing my problem, I had not to change values in the registry key. If this does not work, follow ALL the steps in the referenced article.