error code 646 keeps appearing when I try to get critical updates?

Similar Questions

• Error code 0 x 80040154 when you try to run Windows Update

  I get the error Code 0 x 80040154 when I try to run Windows Update. Need help!

  Hi Linda,.

  Are you sure that the Virus has been completely removed from your system? The behavior you describe looks like maybe it's still there, or there may be damage he did while he was in your system.

  You can try running this repair order: http://support.microsoft.com/kb/929833

  Also run this tool: http://support.microsoft.com/kb/947821

  and see if there are damaged/corrupted files.

• Error code 646 is displayed when I try to install the following updates

  I have a problem installing the following 4 major updates, whenever I tried they do not give an error code 646
  Update of security for Microsoft Office Excel 2007 (KB973593)
  ImportantUpdate for Microsoft Office Word 2007 (KB974561)
  Update of security for Microsoft Office 2007 System (KB973704)
  Update for the junk e-mail in Outlook 2007 (KB975960) filter

  Hello Sue A31.

  Thank you for using the Microsoft answers Forums.

   

  Solution for error 646:

  Disable all Firewalls and try to install the updates and the stand-alone installation (download manually).

  Reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Restart the computer after the update is installed.

  Also check with

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/6e716883-7af4-4A9F-8665-2f4dd57eee8d

  http://support.Microsoft.com/kb/822798

  That should solve the problem.

  Thank you.

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO. C

• Error code 646 is displayed when I try to install & reinstall KB2680317. It will not install

  I tried typing in the KB2680317 and tried a manual install and again, it won't install the update but comes up with the error code 646 and 1 update failed. What can I do else? Thank you!

  Hello

  These can help you:

  Method 1: Run the Microsoft fixit

  Review the information in the site mentioned below

  http://support.microsoft.com/kb/2258121.

• Error code 0 x 80248014 when you try to run MSE Update on Vista 64 bit OS

  Tomb guard Windows Update crashes when you try to run the Service Pack 1 for Vista 64 even if it seems to have installed service pack when I view installed updates.  Update the window continues to show the service pack update according to availability.  So far, I ran it three times and he shows as installed three days in a row, but he does not appear in the properties view and continues to show an available update when I check for updates.

  It's a little confusing because the error code 0 x 80248014 appears when you try to update to MSE, so there seems to be two issues.  The MSE error one and two, the apparent success of the installation of the Service pack 1 for 64 bit Vista Home Premium but not appear in the properties view and always appear when checking for updates, even if each attempt to install appears to be successful.

  Hello

  Run the system update tool

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-system-update-readiness-tool

  Retry the update

  Reset the Windows Update components

  http://support.Microsoft.com/kb/971058/en-us

  Error MSE - which describes the boots s. is what will do the above tools.

  http://answers.Microsoft.com/en-us/protect/Forum/MSE-protect_start/error-code-0x80248014/3c3f7fca-F9E0-4D50-afa2-63acab6fb163

• I use Windows XP and get the error code 0 x 80070424 when you try to use Windows Update.

  When I try to access Windows update, I get an error code 0 x 80070424. I've read many threads, but want to make sure that the solution is for Windows XP

  Try this link

  http://www.techiecorner.com/112/error-number-0x80070424-in-Windows-Update-solution/

• I get the error code 0 x 80240036 when you try to install the updates.

  I just be reformatted my old pc. Dell Dimension 5000, 9 years. Windows XP. I try to use the windows updates, but he repeats to me "the website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem"and I get error code 0 x 80240036.

  I installed internet, itunes etc so I know that the computer is updated for other programs.

  I reformated this computer once or twice during his lifetime but did not encounter this problem before.

  Any advice would be great.

  Thank you

  Original title: Windows update problems on pc of the year 9 after reformat

  Hello Crom

  My first advice is to slowly get out of Windows XP... It's time to upgrade, but that's my opinion.
  This problem is very common and can be easily solved by:
  1. Download the latest Windows Update Agent
     http://download.windowsupdate.com/WindowsUpdate/redist/standalone/7.4.7600.226/WindowsUpdateAgent30-x86.exe
  2. Then click on your keyboard click the Windows + R at the same time
  3. Type CMD and press enter
  4. Now, enter the command

     net stop bits

  5. Run the Windows Update Agent
  6. Enter the following command at the command prompt (step 2):

     net start wuauserv

  7. Now, enter the command

     Net start bits
  Let me know if it solves your problem.
  Yuri

• Error codes (8000641, 0070641, 641) when you try to do an update?

  I get these error codes in windows updates is an automatic update.

  Hi scotty_469,

  Try this, it will fix your Windows Installer problem

  Open Notepad.

  Copy the following into Notepad and save it as fixme.reg

     push all the files and then save it to your desktop.

  Windows Registry Editor Version 5.00

   

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\msiserver]

  'DisplayName"="@%SystemRoot%\\system32\\msimsg.dll,-27 '.

  "ImagePath" = hex (2): 25, 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 72, 00, 6f, 00, 6f, 00,------.

  74,00,25,00 5 C 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 6 D,------.

  00,73,00,69,00,65,00,78,00,65,00,63,00,20,00, 2f, 56, 00, 00, 00, 00

  'Description"="@%SystemRoot%\\system32\\msimsg.dll,-32 '.

  "LocalSystem ObjectName"=""

  "ErrorControl" = DWORD: 00000001

  "Start" = dword:00000003

  'Type' = dword:00000010

  "DependOnService" = hex (7): 72, 00, 70, 00, 63, 00, 73, 00, 73, 00, 00, 00, 00, 00

  "ServiceSidType" = DWORD: 00000001

  "RequiredPrivileges" is hex (7): 53, 00, 65, 00, 54, 00, 63, 00 62 00, 50, 00, 72, 00, 69, 00, 76,------.

  00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 43, 00, 72, 00, 65, 00, 61, 00,------.

  74,00,65,00,50,00,61,00,67,00,65,00,66,00,69,00, 6 C, 00, 65, 00, 50, 00, 72, 00, 69,--------.

  00,76,00,69,00 6 c 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 4 c, 00, 6f 00, 63, 00,------.

  6B, 00, 4 d, 00, 65, 00, 6 d, 00, 6f, 00, 72, 00, 79, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

  00,65,00,67,00,65,00,00,00,53,00,65,00,49,00, 6F, 00, 63, 00, 72, 00, 65, 00, 61, 00,------.

  73,00,65,00,42,00,61,00,73,00,65,00,50,00,72,00,69,00, 6f, 00, 72, 00, 69, 00, 74,------.

  00,79,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00,------.

  65,00,43,00,72,00,65,00,61,00,74,00,65,00,50,00,65,00,72,00, 6 d, 00, 61, 00, 6e,------.

  00,65,00, 6F, 00, 74, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 C, 00, 65, 00, 67, 00, 65, 00,------.

  00,00,53,00,65,00,41,00,75,00,64,00,69,00,74,00,50,00,72,00,69,00,76,00,69,------.

  00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 53, 00, 65, 00, 63, 00, 75, 00, 72, 00,------.

  69,00,74,00,79,00,50,00,72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00,------.

  00,53,00,65,00,43,00,68,00,61,00, 6F, 00, 00, 65, 67, 00, 4F, 00, 6f, 00, 00, 69, 74, 00,------.

  66,00,79,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53,------.

  00,65,00,50,00,72,00, 6f, 66, 00, 00, 69, 00, 6 c, 00, 65, 00, 53, 69, 00, 00, 6F, 00, 67, 00,------.

  6 c, 00, 65, 00, 50, 00, 72, 00, 6f, 00, 63, 00, 65, 00, 73, 00, 73, 00, 50, 00, 72, 00, 69, 00, 76,------.

  00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 49, 00, 6 D, 00, 00, 65, 70, 00,------.

  72,00,73,00, 6f, 00, 6F, 00, 61, 00, 74, 00, 65, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

  00,65,00,67,00,65,00,00,00,53,00,65,00,43,00,72,00,65,00,61,00,74,00,65,00,------.

  47.00, 6 c, 00, 6f, 00, 62, 00, 61, 00, 6 c, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00, 65,.

  00,67,00,65,00,00,00,53,00,65,00,41,00,73,00,73,00,69,00,67,00, 6F, 00, 50, 00,------.

  72,00,69,00, 6 d, 00, 61, 00, 72, 00, 79, 00, 54, 00, 6f, 00, 6 b, 65, 00, 00, 6F, 00, 00, 50, 72,------.

  00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 52, 00, 65, 00,------.

  73,00,74,00, 6f, 00, 72, 00, 65, 50, 00, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00 65 00, 67,.

  00,65,00,00,00,53,00,65,00,49,00, 6F, 00, 63, 00, 72, 00, 65, 00, 61, 00, 73, 00, 65, 00,------.

  51,00,75,00, 6f, 00, 74, 00, 61, 50, 00, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00 65 00, 67,.

  00,65,00,00,00,53,00,65,00,53,00,68,00,75,00,74,00,64,00, 6f, 77, 00, 00, 6F, 00,------.

  50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 54,------.

  00,61,00, 6B, 00, 65, 00, 4f, 77, 00, 00, 6F, 00, 65, 72, 00, 00, 73, 00, 68, 00, 00, 69, 70, 00,------.

  50,00,72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 4 C,

  00, 6f, 00, 61, 00, 64, 00, 44, 00, 72, 00, 69, 00, 76, 00, 65, 00, 72, 00, 50, 00, 72, 00, 69, 00,------.

  76,00,69,00, 6 c, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 42, 00, 61, 00, 63, 00, 6 b------.

  00,75,00,70,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00,------.

  00.00

  "FailureActions" = hex: 84, 03, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 03, 00, 00, 00, 14, 00, 00,------.

  00,01,00,00,00, c0, d4, 01, 00, 01, 00, 00, 00, e0, 93, 04, 00, 00, 00, 00, 00, 00, 00, 00, 00

  Go to your desktop and double-click the file name fixme.reg

  or

  Click Start.

  Type regedit in the search field and press to enter.

  On the registry change windows click on file and select import.

  Navigate to the location where the fixme.reg file and select the file.

  Click ok on the windows screen once the registry is merged successfully.

  Restart computer and check if updates installs.

  I also had iolo which weaken my Windows Installer, then I uninstalled it. Figured out that caused the problem

  Hope this helps

  Please come back if you need more help

  Thank you

  Makoi

• Error code 646 is displayed when I try to install & reinstall KB2680317. It will not install and my pc (Windows Vista 64-bit) keeps crashing.

  My pc has attempted to install Windows Update (see above) without success. Tried the Microsoft Fix It without success. Computer continues to crash with attempts.

  Hello

   
   
  
  Were there any changes (hardware or software) to the computer before the show?
   
   
  Method 1: try the manual steps from the link below and see if the problem is resolved.
  http://support.Microsoft.com/kb/2258121 
   
   
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  
  Method 2: perform the steps from the link below and see if it helps.
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
  
   Method 3: download and install the update manually and see if it helps.
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=29346
   
   
  Hope this information helps.

• Error code 1935, Code 643 & Code 8007000 b appears when I try to update Windows

  Hi, I hope I'm posting in the right part of the forum. I just had to restart my computer after a virus & I now get 1935 error code, Code 643 & Code 8007000 b appears when I try to update.

  There are currently something like 100 updates of odd windows trying to download right now & that none will not charge.

  The full error message for Error 1935 is - Microsoft.VC90.ATL, version = "9.0.30729.1', the public key token ="1fc8b3b9a1e18e3b"processorArchitecture ="x 86", type = win32" HRESULT:0x800736B3 "

  I don't know if this makes no sense.

  A small digression - when I try to update Java, the error message contains something about a connection "proxy" regarding the internet connection. I'll contact my ISP that do of course all is on their end.

  I don't have a great understanding of the side 'tech' of computers so I hope this is enough information. Thanks for any help you can give me :)

  I'm leaving the Vista operating system. Are you sure that you are now free of infection?

  FYI

  Error message when you use Microsoft Update or Windows Update Web site to install updates: "0x8007000B"
  http://support.Microsoft.com/kb/956699/

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Otherwise, you will need to consider more updates failed if no help not reset the settings of WU etc..

  1. open Windows Update by clicking the Start button, all programs and then click Windows Update.

  2. in the left pane, click view update history.

  3. find an update for Windows that has failed to install, and then double-click the update to view more information.

  Updates that have failed to install will display failed under status, next to the name of update.

  4. in the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.

  5. click on the links in the dialog box Windows Update under more information or help and Support to try to solve the problem, then try to reinstall updates by using Windows Update in Control Panel or by mail with the error code and maybe someone may be able to help others.

  Note If you see the error code '800f0826' in your history, it indicates a previous update failed to install and additional facilities prevent the updates. If the information reveals 800f0826 move on the following, until you get the update that displays a different error code of 800f0826.

  Once you have located the update that failed and caused the problem, so that must be fixed before you can install other updates.

  TaurArian [MVP] 2005-2010 - Update Services

• error code 80070020 keeps appearing

  Windows up date works except when I try to update it. Error code 80070020 keeps appearing.

  Hello

  Were there any changes made on the computer before the show?

  I suggest you to return the item and check if it helps:

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

  Note: run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

• Receive the error code: 0 x 0070017 when I try to save it on a Vista 32 bit.

  Original title: I get the error code 0 x 0070017 when I try to save it on a Vista 32 bit. I tried disk repair & restoration. does not work. any help appreciated, Doug

  Recently, I have code failure error 0 x 0070017 when I save.   Using the error checking & repair disk hard does not help, nor restores at the earliest.  I tried the restore dates & get restore disk failed. All the disks are clean virus according to Norton 360.   This computer running Vista 32 bit.

  Any help is appreciated... Doug

  Hi Doug,.

  1. What is the full error message that you receive?

  2. are you trying to backup to an external drive?

  3. you have any third-party backup program installed on the system?

  4. have you made a recent software or hardware changes to the system?

  I'm sorry to know that you are always faced with the question after performing a restore of system and control of disk. However, you can try the following steps and check if it helps:

  Method 1:

  You can try to change the backup location and see if it helps.

  For more information, see the article:

  Change when you save your files

  Method 2:

  You can temporarily disable antivirus software and firewall on the computer as a test and check if it makes a difference.

  If disabling the antivirus/firewall resolves the issue, you may need to configure the settings of the antivirus/firewall accordingly. Please contact the software vendor for assistance in this regard.

  Note: Make sure that you enable the antivirus software and firewall after the test.

  Please post back and let us know if the steps helps to solve the problem.

• error code (0x000000d) windows vista when I try to print, also cannot open windows updates or control panel

  error code (0x000000d) windows vista when I try to print, also cannot open windows updates or control panel

  Hi lisafuller,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. What is the serial number and model of the printer?

  4. what happens when you try to access that Windows update and Control Panel?

  5. do you have security software installed on the computer?

   

  Method 1

  See the below Microsoft article and try the steps mentioned, check if it helps.

  Error message when you try to install a network printer on a Windows Vista-based computer: "Windows cannot connect to the printer operation cannot complete (error 0x0000000d).

  http://support.Microsoft.com/kb/947236

  Method 2

  If the previous step fails, then check out the link below and run them the troubleshooter, check if it helps.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Due to Windows update run the Windows Update troubleshooting, check if it helps.

  Open the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Also check if you can access control panel from safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

• 1001 error code in the registry when you try to remove an old program using programs and features in Control Panel. How can I fix?

  1001 error code in the registry when you try to remove an old program using programs and features in Control Panel.  How can I fix?

  Computer Windows 7

  Tried to reinstall the older version, she received error 1001 something again with the registry.   Does not remove old software.

  Hi Carol,

  1. what program or software you are trying to delete?

  2. What is the code or an exact error message?

  Please provide us with more information on the specific question, to find a solution as soon as possible.

  Follow the link below and check them with the question:

  Solve problems with programs that cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

   

  I hope this helps.

• Help! I get the error message 0 x 80190194 when I try to enable Windows Update in Windows XP Professional

  Help! I get the error message 0 x 80190194 when I try to enable Windows Update in Windows XP Professional

  Current solution: download IE8 for XP, run who, follow the Setup Wizard, wait for his failure. Download manually upgrade restart, recommended.

  Restart the installation of IE8, wait that he remove previous IE. Reset.

  Installation of IE8 restart to restart. Let it run. May need to restart.

  Try to run windows update again. IF it works, woot, otherwise download the SP3 of XP service pack from Microsoft. As the Windows update fails, you must not download an installer, but an ISO standard. Burn the ISO to a CD and install (way to go...) or download a free tool like 7Zip and unpack iso and install a go from there.

  From there on, the installation of SP3 and hope this works...