Error code C00D11B1 in WMP 11 when streaming!
I get this error code when you try to listen to the radio from the following site:http://belmizikfm.com/wplayer.php and despite trying all the solutions of a variety of forums (DRM, Codecs, deleting files, etc) I can not find a solution. Sometimes it plays for a few minutes then stops and according to their administrator no one else has this problem. I have this problem on my desktop running XP and on my laptop that runs VISTA.
I have no other problem with WMP11: I can read CD, watch videos, RIP, listen to the radio via the Media Guide, etc. and I have no problem, listen to internet radio stations, which don't use WMP. If at this point, I'm totally "puzzled" and looking for help with this problem. I tried almost everything I can think of, but still want to meet this challenge!
Thank you for any assistance that would be greatly appreciated.
Bob
I just tried to read the stream in WMP on my Vista system, and he played very well for more than 30 minutes, up to what I stopped it myself. There might be some problem with the connection on your side (e.g., dropouts), VLC is somehow able to handle better than WMP.
If possible, I suggest that you try to play the stream on your laptop via another Internet connection (perhaps at a friend's House), preferably using a different ISP.
Tim Baets
http://www.BM-productions.TK
Tags: Windows
Similar Questions
-
How can you correct error code 800 F082F I get when trying to install SP1?
How can you correct error code 800 F082F I get when trying to install SP1?
Hello
1. you are trying to install service pack 1 through Windows Update?
2. What is the exact error message?Cause of the error 800F082F: cannot install this update with the other updates. Therefore, if you have already installed other updates without rebooting, and then you try to install this update, you may receive error 800F082F. To resolve this issue, restart your computer, and then install this update again.
If the problem still persists, then download SP1 from the Microsoft Download Center and install it.
For 32-bit computers: http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=30
For 64-bit computers: http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=21299 -
error code 0x80072EFD-0 x 20000 when I tried to download windows 10 free download
Original title: help
(Gateway) computer will not download anything, games, windows, properties of facility repair reimage, error msg 0 x 0 when he tries to set up regular updates. error code 0x80072EFD-0 x 20000 when I tried to download download free windows 10... Help
Follow these steps that works for everyone who tried to overcome Windows Upgrade failure - Microsoft Community 10.
Because of the obvious corruption I backup your data can do the media and choose to Upgrade savings or boot media to make the superior Clean install Windows 10 improvement that will be activated after the installation by following the steps described in the WIki.
-
error code 0 x 80246007 appears when you try to install updates and the windows store purchases.
any help appreciated
Original title: error code 0 x 80246007
Hello
Please try the patches for Windows Updates:And for store related issues, use Troubleshooting Windows App tool:Hope this helps, good luck :) -
What does the error code 1003? It appears when I want to perform an automatic update of the creative cloud.
-
Error code:-5006: 0 x 80070005 when you try to install a game
Original title: Error Code:-5006: 0 x 80070005 - HELP PLEASE!
Error code:-5006: 0 x 80070005
PS - I'm running Windows 7 Ultimate - 32 bit.
Any help would be grateful :)
Thank you!
Hi stevepayne1994,
-What is the game you are trying to install?
Try to install the game in administrator mode and check if this solves the problem.
To install the program in administrator mode,
a. Locate the program icon, right-click and select run as administrator.
b. when the UAC message is displayed, do one of the following:
· If logged in as a standard user, or if UAC is configured to always require credentials, enter the appropriate administrative credentials, and then click OK.
· If you logged in as an administrator and UAC is not configured to always require credentials, click Yes to start the application.
Proceed with the installation and check whether the problem is resolved.
Gokul - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
error code 0 x 643 returned when Windows Update failed in the XP Home laptop system
Could not install Win Update (KB951847) x 86 called MS .NET 3.5 service pack 1 + update .NET framework 3.5 .NET 2.0 to 3.5 worm family. I need help to fix my laptop Win XP Home to accept this update, but also cases of simultaneous failure of (KB969615) windows update error code 0 x 4397 - MS Office 2003
You will have to reinstall applications
1. how to fix corruption problems MSI software update registration
http://support.Microsoft.com/kb/9711872. If this does not work-
Versions of the .NET framework must be installed in this order, .net Framework 3.5, .net Framework 1.1, .NET Framework 1.1 SP1
Follows (in reference to the removal for the framework and associated information tool)
When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
http://support.Microsoft.com/kb/923100When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
http://support.Microsoft.com/kb/976982TaurArian [MVP] 2005-2010 - Update Services
-
I can't return Macafee for them to help me
When you uninstall McAfee, it often leaves remainders you need the tool to remove.
You will have to contact McAfee yourself.
Take the phone Option!It is a separate link under the Chat/email link.
Click on 'Customer Service phone' > put to the United Kingdom as country > phone number > Contact McAfee
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~http://support.Microsoft.com/default.aspx/KB/948465
Information about Service Pack 2 for Windows Vista and Windows Server 2008
Read the info at the link above.
If the above does not, Windows Update issues:
Windows Update Forum:
This is the recovery and repair of Vista Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
Error code 200020 after self-test when chassis turns off
Hello
This may seem absurd, but I accidentally ran a self-test to the MAX on one of the NI PXI boards (6533) in my chassis (NI 1042 q) when chassis power was off. He returned with an error code of 200020. The same thing has happened with three other NI PXI boards: 6723 6713 and 6221. I turned on the chassis and the same error code occurred. Then I restarted my computer, responsible for MAX, and no devices were found even more.
I followed the steps here to reset MAX, as well as the devices were recognized again, all the self-tests have passed again.
However, I am concerned as to why it happened. Why the error code keep occurring after that I turned on the chassis? Why MAX ceased to recognize my devices? Something is screwed up when I tried to connect with an off camera? In addition, what does error code 200020? I couldn't find documentation about it anywhere.
Thank you
Hey,.
From your description, it seems that you disable the chassis when the PC is still on. This will cause certainly some problems with your PXI devices, because you're basically hot-swapping PXI devices in your system. This may have also messed up things in MAX, as you saw. You should always have your PXI chassis before your start your computer turned on and turned off after your computer has been shut down. This allows your BIOS correctly enumerate the PXI card, which should hopefully avoid these mistakes in the future.
-
Error code 646 keeping coming up when I try to download KB981715
Try to download KB981715 but get an error code 646
http://support.Microsoft.com/kb/2258121/en-AU
You receive the error code 0 x 80070646 or 646 error code when you try to install Microsoft Office updates
http://www.Microsoft.com/downloads/en/default.aspx
Also, try to put the number in the search at the above link > then download it manually.
If the above does not solve it:
Windows Update Forum:
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon
Mick Murphy - Microsoft partner
-
Error code C00D11B1 playing ripped web help
original title: Windows Media Player
Windows Media Player will not play my ripped web aide said music C00D11B1 error code but my sound is fine?
You have a pack of codecs or another media player installed on your system? You can uninstall and check if it solves the problem?
If you receive error C00D11B1 code, it can be a problem with the components of security of your digital media player to play the files on your computer. Follow the instructions in the article given below, because it can help you solve the problem
Windows Media Player C00D11B1:
http://Windows.Microsoft.com/en-us/Windows7/C00D11B1
You can upgrade the security of your digital media player components and check: http://drmlicense.one.microsoft.com/Indivsite/en/indivit.asp
Also take ownership of the files you are trying to play by right clicking on the file and taking possession.
-
win with error code update 64 c (only when trying to install MS update silvelight)
I have already seek and find some answers useful, but without any results. In windows update every time I try to install the update, I get error code 64 c (only for silverlight)
If I try to install it with the exe file via the official website says that I should uninstall the previous version.
I can't uninstall from Add/Remove the Panel (I see not old because updates to intalld after a system restore, I was warned that most of the wount programs work for sure, and as I sayd, I don't see the old updated list)
So I was woundering how I can uninstall it manually becous this is the only way I think.
operating system: win7 ultimate 6.1.7600 32-bitWho has the same problem I just follow these steps http://blogs.msdn.com/rpomeroy/archive/2008/06/10/how-to-manually-clean-up-a-bad-silverlight-installation.aspx
It worked for me. And "PA bear MS MVP" thank you for the help -
Error code: update 0 x 8007040424 when you try to start Microsoft Security Essentials
I can't update MSE. I have a red symbol indicating that I am unproteceted and whenever I try to start the update I get the same error code. I ran PC Cleaner and Malaware bytes, but it is still there.
According to your 'me, too' answer to another thread, you have managed to solve your problem, is that correct?...
... I have tried everything to get rid of the error code 0 x 80070424 that keep me update Microsoft Security Essentials. I tried all suggestions to http://support.microsoft.com/kb/968002#method2 5, downloading and running the tool Norton removal by despair, but he persisited. Finally, I removed the Microsoft Security Essentials completely and it recharged from the MSE Web site, but I chose the new version for 64-bit applications. Downloaded, scanned the readers and found 2 more cleared Trojan horses their and I can say that I am back to normal. Finally.
Source: http://answers.microsoft.com/thread/ae1f980e-5f7b-e011-9b4b-68b599b31bf5
-
I get these two error codes 65535 and 0x8000ff, I'm running Vista 32 bit, with only 1 GB of Ram and use a memory stick as a RAM boost option. System starts as usual, I can connect to the Web, but don't load all files, folders and applications. I have icons on the desktop, but like I said nothing loads. have you tried Live One Care safety scanner, downloads, but used to run, just get the codes above, no matter what I try. In desperation I tried a complete reinstall, still did not work and can not find the productkey.
Thanks for the reply, we, ve decided that the hard drive is shot to pieces, and will install and old windows xp disc i've got. to solve the problem.
-
error code C101002B I get this when I try to play my zune
- Error messages keep stop my newly downloaded work zune
Check the Zune site for technical support: http://www.zune.net/en-US/support/. They also have forums where people who are experts, and Zune users will probably be able to help you - forums are listed on this link. It includes installation instructions and other information that can solve your problem (whatever that is). I looked at the error code and found nothing of value--almost anything.
If the above does not help you, please transfer your question in music and its Forum:http://social.answers.microsoft.com/Forums/en-US/vistagaming/threads , where the audio specialists will be happy to help you.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Maybe you are looking for
-
Cannot start gmail after refusing cookies. How to cancel it?
I clicked on refuse to accept and now I can connect to gmail, but get a message that the page cannot be loaded. It seems that there is nowhere to re - enable cookies. If I use internet explore, it works again, but I prefer to use firefox
-
Screen resolution of Windows Updates celine
original title: after you download several Windows updates... After you download several Windows updates on my comp. my pages on the site are so huge, that I only see half of the page at a time. Anyone know how I can solve this problem to a normal si
-
I read an answer to fix a registry problem for "userappdata", but at the point when I OK to "show the hidden files and folders", I can't find where to go to find the 'properties' to complete the correction. Where can I find "Properties"?
-
Recent Flash kills out of Captivate player
This isn't a Christmas present. I'm pretty busy on the Captivate forum and today we get a lot of complaints. The latest version of Flash Player (20.0.0.267) prevents all published course Captivate with output as SWF to play. Same thing happens to out
-
Where them re-download CS6 Master Collection? [was: lost disk]
Several years ago, I bought the CS6 Master Collection for my son. We moved into a new House since then. Now, I had to reformat the computer, and then reinstall everything from scratch.Yes, you guessed it! I'm not able to find my installation discs o