Screen resolution of Windows Updates celine

Similar Questions

• What I need to know is the name and location of the executable that runs when you click on detect monitors in the menu screen resolution of windows 7?

  Original title: name/location of the executable that runs when you click on detect monitors?

  What I need to know is the name and location of the executable that runs when you click on detect monitors in the menu screen resolution of windows 7?

  Hello

  Your question is better suited in the MSDN forums. Please post your question in the MSDN forums.

  You can follow the link to your question:
  http://social.msdn.Microsoft.com/forums/en-us/categories/

  It will be useful.

• Stuck at the screen 'failure of Windows update Setup.

  I have reset my laptop Windows 8 and downloaded the updates required for Windows 8.1. Then I had to reboot my computer and configure updates. Now it is stuck at the screen 'failure of Windows update Setup. He has already restarted once and is back on the same screen. It is an Asus laptop and from what Ive read, this is not exclusive to all laptops Asus. I do not have any disk installation or any way to activate Safe Mode as I have tried (in fact something that requires search or any key entry does not work). I hope you guys can find a soultion, thank you

  EDIT: I think that now it's in a forever continuous reboot, preparation configure updates, failed comfiguring cycle of windows updates.

  Hello

  What is the full error message? An error code is displayed with her?

  Why did you reset the computer? You had problems?

  This problem could be caused due to some incorrect settings or due to a compatibility issue. I suggest you try these steps in the following article and check if the problem persists.

  http://support.Microsoft.com/kb/949358/en-us

  Keep us updated on the results.

• Screen resolution changed with updates

  I just stop my laptop and he proceeded to make updates. After the updates, it changed my screen resolution and I can't get it back. I have a 3 month-old HP G56, someone knows how to fix this? I tried to change the resolution of the screen in the control panel and it always looks weird. Thank you all

  Suggestions:

  1. set the DPI

  Right-click on a free space of the desktop > customize > column to the left, adjust the size of police (in PPP) > uac prompt > click default scale (96 DPI).

  2 do a system restore, back to the date BEFORE the updates of windows that your restore point.

  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  Note: change your windows to MANUAL updates.
  After the restoration of the system, the same windows updates will reappear.
  Install them one at a time. Check on the screen. If ok, install another, check on the screen, and so on.
  In this way, you will know for sure if the updates are the culprites.
  If know you that the updates is the culprite mark down its KB # > doing a restore of the system again > when updates will reappear again, right-click the update incriminated > click Hide

  Go to the Windows Update section, ask a question about this offending update.
  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• How to adjust the screen resolution in Windows Vista?

  Today my laptop Dell inspiron1525 changed a screen resolution of plurrie without changing.  How can I make running Windows Vista to x 800?

  Thanks for help.

  Hi Klair,

  I suggest to access the link below and follow the steps described in the article and change the resolution on your laptop.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  If you can not change the resolution by following the steps described in the article, you can try to download the latest drivers from Dell Web site for your graphics card and install and then try to change the resolution. Access the link below and download the graphic drivers for your graphics card and try to install it.

  http://support.dell.com/support/downloads/driverslist.aspx?os=WLH&catid=6&dateid=-1&impid=-1&osl=EN&typeid=-1&formatid=-1&servicetag=&SystemID=INS_PNT_PM_1525&hidos=WLH&hidlang=en&TabIndex=&scanSupported=True&scanConsent=False

  Also, you can follow the steps in the link below to update the drivers to display on your computer and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Start up hangs before login in screen after the Windows updated 10/26/2010

  Before going to bed, I decided to install all Windows Update after they have been downloaded (don't know what they are).  I do not download anything at night or for the past weeks.

  Yesterday, I went to turn on my laptop and it could be block/gel just before the log on screen and after departure upward. My pointer doesn't move or anything.  Graphics seem to have stopped and remained black with only the pointer that appears.

  I decided to do a reboot to safemode (all 3) and it hangs at ahcix64.sys.  I also tried a recovery back to a month ago and it would be dismissed. (don't remember error number, but will update when I'm back on what it was).

  I tried to use KNOPPIX to get all my fails, and which also failed during startup.  I would rather a restore of the entire system.  Please let me know if this happens to you.

  MODEL:

  HP TOUCHSMART TX2-1270US

  RAM 4 GB

  AMD TURION X 2

  WINDOWS 7 HOME PREMIUM X 64

  Hello
   
   
  1. How do you do the system restore on your computer?
   
   
  First check to see if there are external devices attached to the computer, if so remove and check.
   
  Method 1.
  Let us run repair system at this stage, it might solve the problem.
  See the following articles for additional help and steps on startup repair.
  Startup Repair
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair
  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
   
   
  Method 2.
  a. place the Windows 7 installation DVD into the DVD drive and restart the computer.
  b. start from the DVD in the System Recovery Options screen by pressing the F8 key.
  c. Select command prompt.
  d. in the type invites the next and press to enter.
  CHKDSK C: /f
  Note: In the command above C refers to the hard disk partition. You can run check disk on all partitions.
  e. once the chksdk is complete, exit the command prompt and restart the computer and check.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Empty (black) screen boot after Windows updates

  I had this problem on two computers this week... until now. Run windows update after I restart the computer. When the computer reboots, they can start to a blank screen (black). These were not updated video card basis. Also, I tried to use the safe mode, but it crashes on MUP. SYS. I ran chkdsk... and who has not fixed it. Any ideas other then a new installation? Thanks for your help!

  Kevin_C_K,
  You said you ran chkdsk and it didn't fix it, but it will report all the problems?
  If you are still having this problem here is a couple of things to try (if you haven't already done so).
  Run the sfc/scannow utility.
  When you have run chkdsk if you do not use the /r switch, then repeat the it like Chkdsk/r

  After the clean installation, update you all hardware drivers before you start the Windows updates? Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• For about two weeks screen installation 18 Windows updates at the stop.

  For about two weeks when I shut down Windows 7, I get the message that Windows installs updates 18; do not to stop the computer.   The screen shows that each update is installed and the computer then goes to the closure program.  Installation time is always the same, which indicates that there may be a problem and I see the same updates on a daily basis.

  I did some research on anti virus program bundled in this machine.  I thought I had seen the McAffe program, but apparently, he was anti Norton virus.

  The procedure will be similar, Yes:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4 uninstall AVG Free 9.0 & reboot.

  HOW to uninstall or change a program
       http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  ATTENTION! Now you're "working without a net": no to anything else online (e.g., navigation, control electronics, cat, other downloading) until you have completed the steps #5 and #6 below!

  5. now to do a fresh install of AVG Free 9.0, this time select the CUSTOM installation option and do NOT install (uncheck) Linkscanner Search-Shield, Active Surf-Shield, security or the email of crawl components toolbar.

  Why you don't need your anti-virus to scan your email
       http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  6. manually and regularly update AVG until you get a prompt "no more updates available.

  7 test cycle.

  Note: If you also think there could be a McAfee application installed at a certain point, he could not not bad for download/run the McAfee tool, too, before proceeding to the 'custom' own installation of AVG 9.0.

  Most of these modules of 9 AVG is not compatible with IE8 IMHO (especially LinkScanner). Do yourself a favor & don't install them.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Unable to change the screen resolution in windows XP

  I have a problem with existing XP OS installed on my machine. I installed Windows XP newly.installation in the success.but screen resolution is low, I'm not able to change the screen resolution.please help me in increases the resolution of the screen.

  Make sure that you have installed the latest graphics drivers for your PC. Download and install from the Web site of the manufacturer of your PC, or if the manufacturer of the graphics card. After you install the drivers, you should have I hope more available screen reolutions to choose.

• want to m6 sleekbook: screen flashing after windows update

  After the update windows 8.1 and later to win 10 screen flashes all the time between desktop screen and blue, already install all updates of HP with the intell and Windows safe mode - the same situation, all reinstalled video drivers by myself, but still no result,

  is it possible to solve this problem without getting windows to the previous version? or reinstall the entire system is the only solution?

  Hi @nazik_UA ,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP ENVY m6 Sleekbook and issues with a screen flashing after an update.

  Here is a link to put the laptop in Safe Mode. This occurs in safe mode?

  You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

  Here is a document that shows how update the drivers that do not work correctly with Windows 10.

  If this did not help, you need to reinstall the operating system.

  I hope this helps.

  Thank you.

• blue screen after installing windows update

  Original title: Windows Update system killed 13 March 2012

  After you install the updates Windows yesterday (13/03/12), the screens of the blue system at startup and in safe mode, does not restore system, saying: "a parameter is incorrect."

  Hello

  It is unfortunate to know that you need to perform a reinstallation of the operating system, but there was interference between the files.
   
  You can provide feedback if you have any concerns. Check out the following link.

  http://www.Microsoft.com/mscorp/Execmail/feedback.mspx

• How can I fix the blue screen that appears after the Welcome screen and also the compaq screen changed after windows update the or to the 03/23/11

  March 23 windows set to date. a failure and then managed. After that, the compaq screen has changed and the blue display lights for a little after the Welcome screen.

  Hello

  If you think the update caused the blue screen then uninstall it to check.

  Control Panel - Windows Updates - lower left Installed Updates - uninstall or change

  Or

  Remove an update
  http://windowshelp.Microsoft.com/Windows/en-us/help/182043da-fc3e-4220-AFBC-d9b09f2b2a1a1033.mspx

  Or

  The problems with the removal of updates
  http://windowshelp.Microsoft.com/Windows/en-us/help/5a319824-5cb5-493d-9151-9a97d0f565b61033.mspx
  Or

  How to uninstall updates in Windows Vista
  http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

  Disable or hide optional updates on Windows Vista
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/

  ==============================================================

  If not, remove the updates help then we can troubleshoot the BlueScreens.

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

• Screen resolution of Windows 7 on a netbook?

  I installed OS in my netbook Windows XP in Windows 7 However, now my screen resolution is too low. It was nice when you use XP but now Windows 7 won't let me change my screen what resolution beyond 800 x 600.

  It wasn't a problem when I used XP so I would like to know if there is anything I can do to get back to my old screen resolution which was fine as it was?

  Thank you

  Tuesday, April 15, 2014, 17:11:59 + 0000, IamNads wrote:

  I installed OS in my netbook Windows XP in Windows 7 However, now my screen resolution is too low. It was nice when you use XP but now Windows 7 won't let me change my screen what resolution beyond 800 x 600.

  It wasn't a problem when I used XP so I would like to know if there is anything I can do to get back to my old screen resolution which was fine as it was?

  You need a Windows 7 driver for your video. Check on the netbook
  web site of the manufacturer to see if they have provided a.

• Blue screen, cannot run Windows Update

  I was browsing Reddit when all of a sudden my laptop decided NOPE and closes everything down to make an update. It was 03:00 so I wasn't thinking straight and closed on the rise and went to bed. The next day, while in the class my phone showed me a blue screen with some writing for everything... long enough not to read what was then asked if I wanted to start in different security modes. I thought that this could be because I interrupted an update and I tried to run Windows Update, but it will still not open.   I can't access anything whatever, and I have a paper in four days... Help, please!

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  
  

  WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.

  * Zip up the copy (compress)

  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  Link to find out how to download below.

  http://www.WikiHow.com/use-SkyDrive

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.

  * On the Advanced tab, click Startup and recovery... Settings button.

  * Make sure that automatically restart is unchecked.

  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).

  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.

  * OK your way out.

  * Reboot if changes have been made.

  Please also run MSinfo32 and download the output as well.

  To run MSinfo32 please go to start > run > MSinfo32

  Go to 'file', 'save' and download the PDF is saved with the DMP

  System specs are extremely useful then please include everything you know.

  
  

  Blue screen view and that crashed are often wrong and should only be used in case of emergency...
  
  
  Troubleshooting of Windows/source here
  You can learn more about BSOD here
  You will learn how to test your memory ici 
  An effective question gets help more quick read how here
  Pilot auditor-stalking a GIS behave driver here
  
  
  Co-written by JMH3143
  Team Zigzag3143.com  

• Error screen resolution of Windows 8

  Windows 8 in error on Acer Aspire one (Netbook) D257...

  "The screen resolution is too low for this app run '...
  My resolution is about more...

  Hello AhmedKhateeb,

  You will not be able to use Windows applications if you can not get a resolution of at least 1024 x 768. This requirement will not be changed. Many netbooks do not have a resolution of 1024 x 768.

  See Building Windows 8 Blog about this requirement.
  http://blogs.msdn.com/b/B8/archive/2012/03/21/scaling-to-different-screens.aspx

  Thank you

  Marilyn