Error code "Could not find Macromedia Flash"

Similar Questions

• Help! During the new installation of windows 8 from windows 7, received the error message "could not find readers.

  First post: I have a hp Envy 4-1030us ultrabook comes with windows 7.  from 3 months (after about 1 year of use), he started having the BSOD (blue screen of death) to STOP the messages of error 0x0000007e constantly interrupting sessions.  factory reset which has worked for 2 months but started to do it again.  tried the factory reset again, but now he makes mistakes BSOD after 2-10 minutes of use.  I was so fed up that I had a new OEM DVD of windows 8 and try to start it from the external DVD player connected via USB (laptop doesn't have a DVD player in itself).  When I get to the custom installation, without partitions or drives are listed and the error message 'we could not find all the readers'.  Since it is an ultrabook there is a 32 GB SSD and a 500 GB HARD drive.  in windows 7, these discs are seen without problem.  What I am doing wrong?  Why install it windows 8 can't see the internal drives?  Thanks in advance for any help you can give.

  Hello

  See the links below:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/Windows-8-install-unable-to-find-my-SSD-hard-drive/e54ff7bc-50a9-4e05-85cd-542ca71f621d

  http://www.eightforums.com/tutorials/9573-SATA-driver-load-Windows-8-Setup.html

• Error: Windows could not find the username, when residential group folder sharing.

  Original title: Windows could not find the user name

  I use Window 7 Ultimate and have set up a homegroup. In Windows Explorer, I select a folder and choose share with. I have in the file sharing dialog box, select a user name (I checked that it is a valid user), and then click Add. I get the message "Windows could not find . I can't find a reference anywhere on the web for this problem. I'm the first one to see it?

  Hi David,

  For any question of shared folders in the homegroup, run the resolution of the problems of shared folders to automatically find and fix some common problems.

  Follow these steps to run the troubleshooter.

  a. Click Start, type troubleshooting and press ENTER.

  b. click on show all the link in the left panel.

  c. click on Shared Folders to run the troubleshooter.

  Also have a look if you have file sharing set up properly.

  For more information, you can consult the following articles.

  File sharing essentials

  Share files with anyone

• LabVIEW support 3 error code: could not load front panel

  Hello

  my colleague has a problem after the update to LV2011 (from 2010) and now get: LabVIEW support error code 3: could not load front panel

  Even on my system (also tried a massive compilation)

  

  He's afraid of losing some of his works.

  Zipped file is attached

  Hi Henrik,

  It should work now.

  Instructions to fix a corrupted in 2011 VI or more:

  1. close LabVIEW

  2. Add connPaneRecoveryMode = true to the file LabVIEW.ini (-the file LabVIEW.ini is located in the folder of National Instruments > LabVIEW 2011 > LabVIEW.ini)

  3. open the VI corrupt.

  4. press CTRL + A on the block diagram and the copy / paste to a new VI.

  5. save the new VI.

  6. close LabVIEW and remove the token of the ini (VERY IMPORTANT)

  7 restart LabVIEW and load the new VI and check that it is correct. Save

  Cheers, RMathews

• I want to uninstall "Weather Channel" of my netbook, but getting error code "could not open file uninstall.log.

  I want to uninstall "Weather Channel" of my netbook. I get the error code: ' DO COULD NOT OPEN UNINSTALL. LOG file. Can someone help me get it my computer?

  Original title: uninstall error Code

  Hello CindyKlein,

  You can either try reinstalling weather channel and then try again to uninstall via control panell, or you can download the free trial version of 30 days of Revo uninstaller from the link below.

  http://www.revouninstaller.com/

  I hope this helps.

• did not find macromedia flash

  Error message received as "couldn't find the macromedia flash.

  Uninstall/reinstall Flash. Get it from Adobe . MS - MVP - Elephant Boy computers - don't panic!

• Error signature: "could not find the signature key file: author.p12.

  I'm trying to configure PhoneGap development HTML5, but get a strange error message.

  Author.p12, barsigner.csk, and barsigner.db files are placed under C:\Users\[user]\AppData\Local\Research on the move, as explained in https://developer.blackberry.com/html5/documentation/signing_setup_bb10_apps_2008396_11.html

  I can sign with Momentics and stunts without problem.

  I followed the Start Guide for BlackBerry:

  http://docs.PhoneGap.com/en/2.5.0/guide_getting-started_blackberry_index.MD.html#getting%20Started%2...

  I entered qnx.bbwp.dir, qnx.sigtool.password, qnx.device.ip, qnx.device.password, and qnx.device.pin files of the sample project.properties project.

  But when I type ant qnx load-device at the command line, I always get an error message indicating that the file author.p12 is not found. Do I have to copy the files from signing anywhere else? Where he seeks for them?

  qnx:
  
  load-device:
  
  generate-cod-name:
       [echo] Generated name: cordovaExample.bar
  
  clean:
     [delete] Deleting directory D:\projects\phonegap\bb10\example\build
  
  package-app:
      [mkdir] Created dir: D:\projects\phonegap\bb10\example\build\widget
       [copy] Copying 25 files to D:\projects\phonegap\bb10\example\build\widget
       [copy] Copying 3 files to D:\Program Files\Research In Motion\BlackBerry 10 WebWorks SDK 1.0.4.11\Framework\ext
        [zip] Building zip: D:\projects\phonegap\bb10\example\build\cordovaExample.zip
  
  load-device:
       [exec]
       [exec] D:\projects\phonegap\bb10\example>"D:\Program Files\Research In Motion\BlackBerry 10 WebWorks SDK 1.0.4.11\third_party\node\windows\node.exe" "D:\Program Files\Research In Motion\BlackBerry 10 WebWorks SDK 1.0.4.11\lib\bbwp.js" D:\projects\phonegap\bb10\example\build\cordovaExample.zip -g [signing-password] -o D:\projects\phonegap\bb10\example\build -b 22 --loglevel error
       [exec] [BUILD]   Populating application source
       [exec] [BUILD]   Parsing config.xml
       [exec] [ERROR]   Cannot sign application - failed to find signing key file: author.p12
       [exec] Error: File does not exist or not a file or cannot read: D:\projects\phonegap\bb10\example\build\device\cordovaExample.bar
  

  I finally got it to work!

  With Windows process monitor, I was able to find out where he was really looking for the key signature files.

  Turns out it was looking for them on the remote network drive, although HOMEPATH is simply pointing to ' / '.

  I have now copied the three files to a new folder \\server\share\username\AppData\Local\Research in Motion\. For me, which did the trick.

• Error Code 800706BE and the 800706BE error Code could not update windows. CSP as also stopped working.

  I can't update windows. I get to 800706BA and error Code 800706BE codes. I also get frequent error messages that Cryptographic Services like stopped working. I would really like to fix this way! Thank you.

  OPTION A:

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  OPTION B:

  You see the effects of a hijackware infection!

  NB: If you had no installed anti-virus application or subscription has expired at thetime the first machine was infected and/or your subscription has expired since or the machine is not been kept fully patched in Windows Update constantly, don't waste your time with any of the following: Format & reinstall Windows.  A repair install won't help!

  Microsoft PCSafety provides users at home (only) with free assistance in dealing with infections by malicious software such as viruses, adware and spyware (including unwanted software).
  https://support.Microsoft.com/OAS/default.aspx?&PRID=7552&St=1

  Also available via the homepage of Support of consumer safety: https://consumersecuritysupport.microsoft.com/

  Otherwise...

  1. see if you can download/run the MSRT tool manually: http://www.microsoft.com/security/malwareremove/default.mspx

  NB: Run the FULL scan, not analysis FAST!  You may need to download the MSRT on an uninfected machine and then transfer the MRT. EXE to the infected machine and rename it to SCAN. EXE before running it.

  2A. WinXP-online Windows Live Safety Center scanner 'Protection' (only!) in Mode safe mode with networking, if necessary:http://onecare.live.com/site/en-us/center/howsafe.htm

  2B. Vista or Win7-online this scanner instead: http://onecare.live.com/site/en-us/center/whatsnew.htm

  3. now run a thorough check for hijackware, including registration required before a proper Court, logs don't here. DON'T SKIP THIS STEP!

  I can recommend the assistance of experts available in these forums: http://spywarehammer.com/simplemachinesforum/index.php?board=10.0, http://www.spywarewarrior.com/viewforum.php?f=5, http://www.dslreports.com/forum/cleanup, http://www.bluetack.co.uk/forums/index.phpand http://aumha.net/viewforum.php?f=30

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Try to install the Windows Media Player plug-in and receive an error message "could not find the environment Option that was entered? How can I fix it?

  I can't watch the video of MSN homepage.  The Device Manager in the Control Panel also gives me same error message.  Any help would be appreciated.

  Hi bears Beltran.

  1. what browser do you use for viewing?
  2. What plugin you are trying to install?

  Method 1
  I suggest you to run the fixit from the following link:

  Fix Windows Media Player video and other media or http://support.microsoft.com/mats/windows_media_player_diagnostic/ question library
  Method 2
  I suggest you to scan SFC. Scan SFC will replace missing or damaged files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3
  I suggest you try the steps from the following link:

  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651#reso3

  Method 4
  I suggest you try the steps from the following link:

  The video problems when you use Internet Explorer
  http://support.Microsoft.com/kb/2532294

  Additional information:
  Plug-ins for Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

• LabVIEW support 3 error code: could not load façade (LabVIEW 2014)

  
  

  Hi mnml.

  You cannot save one of these copies, you mentioned?

• error-not find macrmedia flash

  periodically, I get a pop-up error message that says "macrmedia flash cannot be found. My adobe flash player is up-to-date and functional. Why do I get this message?

  I think the solution to this problem. The issue is the screen saver. The problem started when I installed a screen saver. So I thought that maybe the screen saver uses flash . So I uninstalled the screensaver and then reinstalled the screen saver and no more "error message-can not find macromedia flash.

• Impossible to install XP SP3 (could not find the file specified)

  I looked at and followed the steps described in

  Article ID: 950717 - steps to take before you install Windows XP Service Pack 3
   
  I do not have

  • Microsoft Shared Computer Toolkit
  • Pack MUI Remote Desktop Connection (RDP) 6.0 (update 925877 for Windows XP)

  I tried to install SP3 with and without my Antivirus, Antispyware and firewall running programs (several times – 4, 5, or more).  Each time, I get an error staing "could not find the specified file."  Then after being told that SP3 can not be installed and that "Windows XP has been partially updated and may not work properly", I have to restart my system.

  I also followed all the steps in this article (Article ID: 950718 - how to troubleshoot an installation fails in Windows XP Service Pack 3) and still the same thing as above.

   

  I tried to download SP3 directly from the Download Center - same results as before.

   

  I started the BITS service and tried again - same results as above.

   

  I've disabled auto updates and removed to software distribution (download renamed folder as shown) - same results as shown above.

   

  I tried to restore my system to an earlier date - 4 these attempts using different dates and set points during the last wee - ALL have failed.

  I also tried the proposals 1 to 3 in this article (Article ID: 950249-how to remove Windows XP Service Pack 3 from your computer), and none of these steps worked.

  I spent over 8 hours today and yesterday a couple just trying to solve this problem and still don't get anywhere.  I am beyond frustrated at this point.  I know that say Windows can not work properly, and I need my computer to do my job.  Any help would be appreciated.

  You could do a repair installation with a CD of Windows XP with SP3 integrated already.  However, unless this is a new installation that you have installed SP2 on so you could get then SP3 installed on it - you have obviously been broadcast for some time without a lot of fixed security and tastes and your system could very well be stripped because of this.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 11 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you need to do before you install Windows XP SP3:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  Come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.

  Once the computer has been put by the top meat grinder (do it all, like data. even if you JUST did some of them) - download you ' HE Installer "SP3, save it to your desktop, restart and login as an administrator and run this file, following the signs.

• Error code 28: could not find the drivers. Windows 7 64 bit could not find the drivers for my Seagate Expansion Portable Drive. The same system works for another 32-bit version of windows 7.

  Hi, I would be grateful for help on this, I bought a new seagate expansion external hard drive not too long ago (abt 3 months old) and tried to use the device only recently (to back up my files). Windows has detected the drive but says that it could not find the drivers. (code 28)

  When I tried the drive on a 32-bit computer, it showed up working find and dandy. When it is plugged in the computer of the alien-ware, same error.
  Tried the uninstall from Device Manager and restart the computer, still the same error.
  Services.msc open and found windows install offshore. He turned on automatic, but the same error came out. Plug and play Windows was already working.
  Checked Windows SP1 worked, still the same error.
  He got me completely baffled.
  Before this, I had other problems with USB and disabled driver signature Verifier (I think that's what it was called) before you boot into windows. Worked very well for my flash drives each time that I did.
  I also had another external HARD drive which was held only 160G and it worked, so I'm not sure what the problem is with this particular external hard drive.
  Please help, I'm going crazy on this problem...

  The specifications of my devices are as follows:

  Computer

  Model:

  Alienware M14x

  Type of system:

  64-bit operating system

  Hard drive model:

  Portable Seagate Expansion 1 TB drive

  Hello

  28 error code means that the device was not fully installed.

  Method 1: Connect the device, run the hardware and devices Troubleshooter and check if that helps.

  To open the Troubleshoot utility equipment follow the given link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: You can update the drivers and check out them.

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Additional information.

  Install a USB device:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Hope this information helps.

• "Window could not find updates. Error (s) found: Code 80244018. Update the window has encountered a problem.

  Hello!

  I found the error in my system, "window 8.

  The message that is displayed when the search for updates,

  "Window could not find updates. Error (s) found: Code 80244018. Upgrade from window fell on a problem".

  To get help on this error, no feedback is provided by help and support section as well.

  Please help me solve this problem

  Concerning

  Generally attributed to a proxy server or a firewall.

  See the info here:

  http://answers.Microsoft.com/en-us/Office/Forum/officeversion_other-OneNote/i-cant-install-one-note-app-for-surface-RT-error/4737171e-6fce-48f6-88d1-8c44ac0e6ae0

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_store/cannot-upgrade-to-Windows-81-error-0x80244018/56c64112-d374-40Cf-B1B1-8c4fd4924d69

  Discussion:

  http://social.msdn.Microsoft.com/forums/en-us/a8c813ab-5b18-482C-82c4-12f1cc57b460/what-issue-is-attributed-to-error-code-0x80244018

• "Could not find the good (s) below referenced in the catalogue:" error found in the catalog.

  I created a catalog in the catalog for the workspace folder to the same location as the Default.cxml is. I created a library of service interfaces and a library for implementations of service following the instructions in the http://help.adobe.com/en_US/enterpriseplatform/10.0/AEPDeveloperGuide/WSabb771403789c7a3-3 1e63d5312fb7375fac - 8000.html #WSe851854fd1e0856a3adf5f4513046ea7dc4-7ffe. When I use the annotations described my service and the interface library interfaces are added automatically.

  When I deploy my catalog there is no error. I use CRXDE Lite and go to the/content/mosaic/catalogs / [my catalog name] and I can see my interfaces and classes in this service.

  I have create a new Flex for ADEP experience Services and selected the catalogue project that I created. In here, I create a new style sheet in the package of style sheets, and it is created in [project] / src/styleSheets / [name of the style sheet]. I have a right-click on the style sheet and selected "Compile CSS to SWF". My stylesheet is automatically added to the catalog.

  I try to deploy the catalog at this point and it gives me the error "could not find the good (s) below referenced in the catalogue:"and then lists my style sheet. "

  Is that what someone has had this problem and have an idea of what hole I'm fall in?

  I reinstalled Flash Builder and deleted the folder of crx-quickstart on Services of experience so he would have to rebuild.

  I am able to deploy the catalog with a specified pane. I created a stylesheet at the top level of the src folder, it did not appear in the catalog and the catalog deployed.

  I'm not sure what was the causes of the problem with the tiles. I saw it reappear briefly. I deleted the project and re-created and the problem disappeared.