error code: fix 0x800B0101 when you run Microsoft.

Similar Questions

• try to do an update and it gives me an error code 80240016 and when i run Microsoft solve this trobuleshooter it does not work and tells me an occure\red error.

  try to do an update and it gives me an error code 80240016 and when i run Microsoft solve this trobuleshooter it does not work and tells me an occure\red error. How can I fix it?

  Hello

  1. what patch did you try?
  2. update you are trying to install?

  Method 1:
  You can follow the steps in troubleshooting this article and check:
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:
  You can also try the steps from the link:
  Windows Update, error 80240016
  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.
  http://support.Microsoft.com/kb/957307

  Method 3:
  You can also perform a clean boot, and then try to install and check.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

• details of error: code 80071a 91 when you try to install the 'a security update for windows vista (kb2855844).

  details of error: code 80071a 91 when you try to install the 'a security update for windows vista (kb2855844).

  does anyone know how to go beyond this error?

  Thank you.

  Moved from Vista to install, upgrade and activate Forum.

  Take a look at this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/unable-to-install-updates-getting-error-code/27a21977-F964-4376-BFAB-2f29ea127c6a

• "" Unknown device is error message "is not a driver" when you run Microsoft Fixit Center

  Original title: driver problem

  When microsoft fixit center running, I get a message that says ' unknown device is not a driver.  What should I do?

  Hello Stephanie,.

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, it seems that you are having problems with Microsoft Fixit Center. "As I understand it, you get an error message" unknown device is not a driver.

  I need to ask you some questions to help you better.

  1. why you use Microsoft Fixit Center?

  2 do you have connected a device to the computer apart from keyboard and mouse?

  Reply with answers to help you in a better way.

• error code 0x800b010e high cotext used run microsoft fix it programs

  Attach it to the usual run files and folders or codex falls down, is back with 0x800b010e and high context error codes.

  Hello

  Including the exact name of the troubleshooting, you tried to run when the issue has been met?

  Provide the event logs to better understand the issue.

  See the links below for more information.

  Procedure to view and manage event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

  Using the event viewer

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Method 1:

  Runt the SFC scan as this problem may occur due to corrupted system files.

  Reference:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 2:

  Clean boot

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note:

  How to configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  1. Click Startand then click run.
  2. Type msconfigand click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.
  4. When you are prompted, click restart to restart the computer

• error 800b0100 code under vista when you run the update

  Updates kb2345886 and kb971737 fail. I searched the forums and help sites; I used the system preparation tool and installed the KB947821 hotfix with her, and the updates always fail with error 800b0100 code. I don't know what to do at this point. Any help would be appreciated.

  Hello

  Windows Update error 800b0100
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-800B0100

  Error message when you try to use Microsoft Update or Windows Update Web sites to install
  updates: "0x800B0100.
  http://support.Microsoft.com/kb/956702
  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ================================================================

  If necessary, you can get free reports of incidents however generally above allows to solve this problem.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

• Error 10 and 28 when you install Microsoft Access Code

  Original title: code 10, code 28

  I am trying to install a Microsoft keyboard on a USB key.  I'm getting code 10 and 28 drivers about code.  Everything must be up to date.  I have a borrowed keyboard that uses a regular port.

  I asked Microsoft updated drivers and told to download the intellitype pro, I did and which does not recognise either.

  I used different ports, no luck.  I plugged a flashdrive in ports and worked, so apparently it's a software problem.

  How/where can I get the drivers that it must apparently (keyboard microsoft comfort curve keyboard 2000)

  Hello

  ·        As I see that you tried to install the software intellipoint for the keyboard, would now what happens when you start the installation?

  ·        How is what you are starting the installation of the drivers?

  Both the error code you get are related to the driver. You can read the articles given below for more information on the student of the error and the resolution.

  http://support.Microsoft.com/kb/310123

  http://support.Microsoft.com/kb/943104/

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error Code D59. -When you try to install Microsoft SQL Server 2005 KB2463332

  I get D59 error Code when you try to install Microsoft SQL Server 2005 KB2463332. Any suggestions?

  Hello

  Try to download and install manually and check:

  http://www.Microsoft.com/downloads/en/details.aspx?familyid=D09C1D60-A13C-4479-9B91-9E8B9D835CDC&displaylang=en

  For more information, see this:

  http://support.Microsoft.com/kb/822798

  It will be useful.

• error code ox c80001fe when you try to update system

  The website has encountered a problem and cannot display the page you are trying to view.

  Hi faouzibenamor,

   

  I suggest you follow the article below:

  You receive the 0xC80001FE error code when trying to connect to the Windows Update Web site or on the Microsoft Update Web site to install the updates.

   

  http://support.Microsoft.com/kb/958048

  I hope that the above information is useful!

• Error 0 x 80090305 when you run MS Xp SP3 Update

  Have not been able to run MS update since July.

  
  Whenever I run the update from MS, it is unable to run more than 15-20 seconds before coming back with an error code 0 x 80090305.
  CCleaner was executed, Malwarebytes, etc..  No virus is present (Avast)
  Tried a MS support ticket, a lot of emails, no results.  He had the Windows Update log to analyze - but none of his suggestions made a difference.  Mr Fixit will not run because of the same error.   Impossible to use IE8 to converse with MS cat, same problem.  Having to do this from a separate computer.
  PC is not upgraded to Windows 7 without a complete reinstallation of the o/s.   I may as well re - install Xp if I'll do it and save $200.  (Its a Hp Pavilion 2005 a1510n, so it's not worth investing a lot $.)
  Any suggestions?  I'll try a restore of the system in the meantime, Ms. supporting never even mentioned as a suggestion
  Erik H

  Disable Avast and Malwarebytes and try to update again, you should not use both.

• Error 404 - NOT FOUND when you run a form in the form of 11 g

  Hi all
  
  I had this problem when I run the forms using internet explore.
  
  I'm working on forms 11g using weblogic 10.3 for the deployment of web forms.
  
  Error 404 - not found
  RFC 2068 Hypertext Transfer Protocol--HTTP / 1.1:
  10.4.5 404 not found
  Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent.
  
  If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
  
  Can someone tell me where it went wrong.
  
  Thank you

  Let's start by clearing up some confusion.

  PORTS
  --------------
  Version 11.1.1.x here are how the common ports are defined by default:

  1 HTTP Server - 8888
  2 WLS_FORMS - 9001
  3 WLS_REPORTS - 9002
  4 WLS Admin Server - 7001

  So, if you understand how ports work in general, you should see that there are two ways to run a form. You can go through the HTTP server or directly call the WLS_FORMS. This means that both of the following might work, although one would be a direct path and the other is route the request through the HTTP server:

• http://ie1fdtfc5zl1s:9001/forms/frmservlet? config = frmdemo
  
• http://ie1fdtfc5zl1s:8888/forms/frmservlet? config = frmdemo

  Port 7001, will always be the port of the default server for the classic domain administrator. By default, the only thing that you can do from here is EM or WLS Console access.

  As for the question of the AMT, by default, the generator and the runtime will wait to find tnsnames.ora in hospitality \config Instance so be sure you add the correct entries to the correct file.

  You can hardcode a path to the file you want to use by setting TNS_ADMIN in default.env (e.g. TNS_ADMIN = C:\Oracle\mytnsdirectory). This will only apply to execution of forms and not the manufacturer.

  Also, here is something that is often a source of confusion for many people... just because you started your form in the constructor does not mean that the form running has nothing to do with the manufacturer at this time. In other words, when you click RunForm button in the constructor all that you do is pass a url in a browser. The browser and the form do not use the constructor parameters except that can be passed in the URL (e.g. name of user and password). Running of all forms are considered to be 'runtime '. This means that all information environment to an active form configuration must be defined in default.env. The manufacturer, on the other hand will be based on the system variable, the Windows registry (or shell if under Unix).

• Received error message "error code 1073 Win32' when you try to stable software.

  What is error: "Win32 error. Code: 1073.

  occurred when you try to install a software registered and paid.  message went on to say, "the specified service already exists", I have a trial version of this software, but it has expired.  This is why I bought it.  Help!

  Uninstall the trial version of the software before you try to install the retail version.
  Then see if you still get the same messge of error.

  Thank you

• Error of identifying incorrect when you run a select statement

  Hi all

  I get this weird error when you try to run the statement select it below:

  Error on line 16

  ORA-00904: "A". "" LIMCU ": invalid identifier

  SELECT

  B.IMAITM,

  A.LIMCU,

  A.LILOCN,

  COUNCS/10000 "COUNCS."

  A.LIPQOH,

  A.LIURAB,

  A.LIGLPT,

  B.IMLITM,

  B.IMDSC1,

  B.IMSRP2

  Of

  BODS_READONLY. F41021 A, BODS_READONLY. F4101 B,

  BODS_READONLY. F41001 C, BODS_READONLY. F4105 D

  JOIN INTERNAL BODS_READONLY. F0005 F5 ON

  F5. DRDL02 = A.LIMCU

  WHERE

  A.LIITM = B.IMITM AND

  A.LIMCU = C.CIMCU AND

  A.LIMCU = D.COMCU AND

  B.IMITM = D.COITM AND

  D.COLEDG = C.CICSMT AND

  A.LILOCN IN ("FM", "SF")

  He worked Frank and thanks.

  Kind regards

  N. Ganesh

• Hi, Ive got error code 50 happen when you try to update the cloud, can anyone help it stops at 50%

  error code 50 showing on cloud adobe when update it gets to 50% then stops. Claire

  Restart the computer and try to update again.

  Always the same?

  Adobe process 1) end all as creative cloud, CoreSync... this from the activity monitor (Mac) or the task manager (Win)

  ( 2) uninstall Adobe Creative Cloud app using the uninstaller CC.,

  https://helpx.Adobe.com/creative-cloud/help/uninstall-creative-cloud-desktop-app.html

  ( 3) download install and reinstall Adobe Creative Cloud and check.

  Windows:

  https://ccmdls.adobe.com/AdobeProducts/KCCC/1/Win32/CreativeCloudSet-up.exe

  Mac:

  https://ccmdls.Adobe.com/AdobeProducts/KCCC/1/OSX10/CreativeCloudInstaller.dmg

• Get the error Code 'WindowsUpdate_8E5E03FB' 'WindowsUpdates_dt000' when you try to download recommended update using the automatic settings 'updates '.

  I just noticed today, pronouncing the 'permission' to Windows to download and install, it is recommended to update it tries to download the update, hit 11% downloaded and then shows the dialog window "update failed", asking me to "Try Again", etc. etc. I googled the error exactly as stated above, and it takes to me an article 'A' answer the Question which recommends a bunch of steps that I have not the first clue of what they mean, or what they will do. I used the option "Microsoft Fix It" after a search, in an attempt to reset the Windows Update settings, but I don't know if it's working or not, although clearly it did nothing to help in the installation of this download. By examining the log of the updates installed, I am able to receive and install other updates, however, it is with a update I see several attempts in the last days to install, and each of them ended in failure.

  When we look at the site of Question answer, other than to check to ensure the update is, indeed, the Automatic value, that it is in accordance with the instructions given that's where I get lost. The following suggestion is something to do with the "C:\windows\system32\catroot" folder, I've never even heard of, and am more than a little reluctant to go messing around with this stuff. Can any that illuminate what he done, or point me in a direction to a response that is written in 'English' for those of us without much experience of computer programming? Live is support available for all what is the cause? Any suggestions much appreciated!

  See you soon!

  Ken, "Medic95."

  See if KB970430 will install after you uninstall IOBit Security 360 & reboot. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft