Error CODE on the HP deskjet F4480 printer,
and CANNOT PRINT or SCAN, this is perhaps because I had 2 FILLED-UP cartridges...?
I UNINSTALL the DRIVERS and the new Reinstalled 3 TIMES, and these PROBLEMS are not RESOLVED
Thank you!! DIAGNOSIS of HP said, they are NOT COMPATIBLE...
Thank you
Try this:
http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
Tags: Windows
Similar Questions
-
error code 1722: the RPC server is unavailable. (I can't print documents)
Hello
I can't print my documents, I have message from UN code error 1722 the RPC server is unavailableI started solving the problems on my printer, Windows did not find problem.I bought a software to repair Windows (Regenie), I was able to print during the morning, and the afternoon impossible.I restarted the Regenie software, I restarted my PC, and always impossible to print documents, with the same error error code 1722 the RPC server is unavailableI don't know what to do, thanks for your helpThanks for your repliesGood to youHello
See this page to select your language:
http://support.Microsoft.com/common/international.aspx
====================================
Or sorry that it is area English.
Left click at the bottom of the Microsoft Community page
English and set your language.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
HP 15-f305ddx: I haveva hp 15-f305dx with an error code and the password of the bios 58495227
I have a haveva hp 15-f305dx with an error code and the password of the bios 58495227
Thank you so much, you're the best
-
I'm trying to download the updates of windows, but some of them don't download and all I get is an error code of the 57th. Help please?
How to view the log of update Windows
Click Start and then click Run.
In the Open box, type %windir%\windowsupdate.log
and then click OK.
Scroll down to the last entries find the error codes associated with the last attempt to download/install. If the appropriate copy and paste the codes of errors in this thread if someone may be able to help you. On the other hand, you can find the error code and other suggestions by searching the forum.
Also check the Windows file called Ko folder * .log (* = number of update KB896688 ie) and send the contents of the update has failed.
This may even provide clues as to why the update failed.
How to read the Windowsupdate.log file: http://support.microsoft.com/?kbid=902093
-
57 a error code during the installation of Windows Update KB2598290
Windows downloding this update, but allow to install this update
57 a error code during the installation of Windows Update KB2598290
Options-
1. let your office product installation media in the drive and try to install the update.
2. try manually download and install the update: http://www.microsoft.com/en-us/download/details.aspx?id=29770
3. repair Office and try to install the update.
http://support.Microsoft.com/kb/924614 -
Cannot change anything in the action center error code and the blue screen and stops.
I can't do anything on my computer with windows7 can not install updaets or sofyware of security I get an error code and the blue screen and stops
OT:everytime I try to change anything whatsoever in the action center ndour windowws blue security and my computer shuts down
Hey Chrisb,You did changes to the computer before the show?
Step 1: I suggest to start the computer in safe mode and check if the problem persists.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-modeStep 2: If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.Hope this information is helpful and let us know if you need more assistance. We will be happy to help. -
1001 error code in the registry when you try to remove an old program using programs and features in Control Panel. How can I fix?
Computer Windows 7
Tried to reinstall the older version, she received error 1001 something again with the registry. Does not remove old software.
Hi Carol,
1. what program or software you are trying to delete?
2. What is the code or an exact error message?
Please provide us with more information on the specific question, to find a solution as soon as possible.
Follow the link below and check them with the question:
Solve problems with programs that cannot be installed or uninstalled:
http://support.Microsoft.com/mats/Program_Install_and_Uninstall/
I hope this helps.
-
Unboxing and set up the HP Deskjet 1000 printer.
Hello
I'll post a useful tip on how Unbox and set up the HP Deskjet 1000 printer. I know that many customers buy the new office jet 1000 and the difficulty in establishing unity. Please follow this video that will guide you through the unboxing conversion and set up the printer.
If you have any questions about setting up the Deskjet 1000 printer, please ask.
Remember if you find one of my post useful or want to say thanks don't forget to click the White Star under my name to give me congratulations.
I really appreciate it!Thank you!
I hope it's useful.
Remember if you find one of my post useful or want to say thanks don't forget to click the White Star under my name to give me congratulations.
I really appreciate it!Thank you!
-
With ten windows error code during the installation of CS4 design standard
With ten windows error code during the installation of CS4 design standard
What a code of error NUMBER or text message?
CS4 is REALLY OLD and can not (probably won't) works with Windows 10
An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others
- or run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)
-
Set the error code for the exception qualified using the pragma exception_init
Hello
I did experiments on exception management in oracle plsql. In my experiments, I did the following anonymous plsql block.
+ < < outer_block > > +.
declare
+ exceptions. +
Start
+ < < inner_block > > +.
+ State +.
+ exceptions. +
+ start +.
+ recovery outer_block.exc +;
+ exception +.
+ What then outer_block.exc +.
+ dbms_output.put_line ("' outdoor Exception caught"); +
+ What then inner_block.exc +.
+ dbms_output.put_line ("'Inner Exception caught"); +
+ end; +
end;
When I run the code, I got the output "external Exception caught".
------------------------------------------------- PLSQL Block 2 -------------------------------------------
I changed the code a little differently by assigning exceptions error codes.
+ < < outer_block > > +.
declare
+ exception exc; +
+ pragma exception_init (exc,-20001); +
Start
+ < < inner_block > > +.
+ State +.
+ exception exc; +
+ pragma exception_init (exc,-20001); +
+ start +.
+ raise_application_error (-20001, "Error"); +
+ exception +.
+ What then outer_block.exc +.
+ dbms_output.put_line ("' outdoor Exception caught"); +
+ What then inner_block.exc +.
+ dbms_output.put_line ("'Inner Exception caught"); +
+ end; +
end;
When I run the above code, I got the following error.
Error on line 1
ORA-06550: line 15, column 9:
PLS-00484: exceptions redundant "EXC" and "EXC" must appear in the same exception handler
ORA-06550: line 5, column 1:
PL/SQL: Statement ignored
Script done on line 21.
------------------------------------------------- PLSQL Block 3 -------------------------------------------
To avoid this error, I changed the code again by qualifying exceptions with their block names. This time, I got a different error.
+ < < outer_block > > +.
declare
+ exception exc; +
+ pragma exception_init (outer_block.exc,-20001); +
Start
+ < < inner_block > > +.
+ State +.
+ exception exc; +
+ pragma exception_init (inner_block.exc,-20001); +
+ start +.
+ raise_application_error (-20001, "Error"); +
+ exception +.
+ What then outer_block.exc +.
+ dbms_output.put_line ("' outdoor Exception caught"); +
+ What then inner_block.exc +.
+ dbms_output.put_line ("'Inner Exception caught"); +
+ end; +
end;
Error on line 1
ORA-06550: line 4, column 38:
PLS-00103: encountered the symbol ". «» When expecting one of the following values:
), = >
The symbol"were replaced by". "to continue.
ORA-06550: line 9, column 42:
PLS-00103: encountered the symbol ". «» When expecting one of the following values:
), = >
The symbol"were replaced by". "to continue.
Question:
Pourraient several exceptions with the same name of the exception defined in the set of nested blocks plsql assign error codes using the pragma EXCEPTION_INIT? If there are errors in the PLSQL 2 blocks and 3, please suggest.
If the same thing could be accomplished by other methods, please explain.The problem in your code block 2 is that you have not only used the same name of the exception, but you have assigned them with the same exception code. If the code is different so it will work...
SQL> set serverout on SQL> ed Wrote file afiedt.buf 1 <
> 2 declare 3 exc exception; 4 pragma exception_init(exc,-20001); 5 begin 6 < > 7 declare 8 exc exception; 9 pragma exception_init(exc,-20002); 10 begin 11 raise_application_error(-20002,'Error raised'); 12 exception 13 when outer_block.exc then 14 dbms_output.put_line('outer Exception caught ' ); 15 when inner_block.exc then 16 dbms_output.put_line('Inner Exception caught ' ); 17 end; 18* end; SQL> / Inner Exception caught PL/SQL procedure successfully completed. SQL> ed Wrote file afiedt.buf 1 < > 2 declare 3 exc exception; 4 pragma exception_init(exc,-20001); 5 begin 6 < > 7 declare 8 exc exception; 9 pragma exception_init(exc,-20002); 10 begin 11 raise_application_error(-20001,'Error raised'); 12 exception 13 when outer_block.exc then 14 dbms_output.put_line('outer Exception caught ' ); 15 when inner_block.exc then 16 dbms_output.put_line('Inner Exception caught ' ); 17 end; 18* end; SQL> / outer Exception caught PL/SQL procedure successfully completed. -
Can anyone help me please with 0xc000012f error code during the installation of Flash Player version 11.6.602.180? I tried several times to install to no avail. Thanks in advance.
Download installer of http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header offline and save it to disk, and then close all browser windows and run the downloaded installer.
-
Word and Adobe tell me that the printer is offline. I received the error code when I tried to turn the printer off.
Hello
Please try the steps below...
- While the printer turned on, unplug the power cord from the back of the printer.
- Turn off the wireless router.
- Wait 30 seconds.
- Connect the power cord to the printer. Look for the error.
- If there is ERROR, like you said, printer then needs to be REPAIRED.
- power on the router and look for the error. If there is ERROR, like you said, printer then needs to be REPAIRED.
If there is NO error and the printer shows offline when printing then download and run the HP print and Scan Doctor www.hp.com/go/tools
-
3310xi is to get an 0xc05d2381 error code. Ink system has failed. Unable to copy, receive phases or printing. See documentatiom of the printer. Thank you for your help. Windows XP
Generally, these 0 x codes indicate an internal error state in the printer. Generally, these are related to the ink system, but not always. Your printer says ink system failure in the error message?
Also, see the steps in the document found here to solve this error code. Let me know how it goes.
-
HP deskjet f4480 printer range: cover open Message, hp deskjet f4480 printer
Hello
I accidentally broke the door sensor for my printer.
The solution says: "Open" and it will not be printed.
I tried to install the broken sensor myself, that says 'C 15' on it.
but I have no idea where it is supposed to go.
Thank you.
Hello @Jen91,
Welcome to the Forums of HP Support!
I understand that you have a sensor of door broken on all-in-one printer, HP Deskjet F4480. Unfortunately, the door sensor is not replaceable part in your HP Deskjet printer. Therefore, to correct the error message 'Door open' on your printer a whole unit replacement would be necessary.
I recommend at this point, contacting the Technical Support queue by phone to explore hardware options.
HP Technical Support can be reached at the: 800-474-6836.
If you do not live in the United States / Canada region, please click the link below to get help from your region number.
I wish you good luck going forward with this!
-
How to copy Step.Result.Error.Code in the local Variable
How can I copy Step.Result.Error.Code to a stage in particulat to a local variable.
I want to print the value of Step.Result.Error.Code in my test report.
Help, please. Thanks in advance.
Kind regards
Sagar Joshi
Yes of course!
This is better handled by the recall of SequenceFilePostStepRuntimeError:
(1) StepResultCode (number) is added FileGlobals
(2) add SequenceFilePostStepRuntimeError callback to your movie file
(3) the next stage of the declaration adds the recall of SequenceFilePostStepRuntimeError :
FileGlobals.StepErrorCode = Parameters.Step.Result.Error.Code
Here is an overview of the sequence:
I hope this helps.
Maybe you are looking for
-
My iMac end 2013 started to be very slow in response to normal applications. I can't think of anything I did that could be the cause. How I try tp repair my SSD... If necessary.
-
HP Pavilion 23-q102nl: upgrade Ram on HP Pavilion 23-q102nl
Hello I want to upgrade the RAM on my HP Pavilion 23-q102nl. He currently holds 4 GB. I would like to know if these 4 GB are currently on a slot or 2x2gb, If she keeps 1x4Go and has a free location, what ram are compatible? can I add 1x8gb and 12 GB
-
E4X57PA #ACJ: graphics software
Readon AMD graphics driver does not find to my Windows laptop, 10
-
Slow loop inside the quick loop
It's my first week of work with LabView so perhaps the answer is very simple. Here's my question: How can I include a slow loop (event B) inside a quick loop (event A)? What I would like is for event B run every 1000 milliseconds, and the event has e
-
APEX 5.0.1 and APEX_UTIL. CREATE_USER
Hi allI would like to create a page, on which admin users will be able to create new users in my application.For this I created a procedure of datasbase with the following content:CREATE OR REPLACE PROCEDURE create_user (p_username IN VARCHAR2, p_pas