Error compiling Movie.  Unknown error.  Premiere Pro export failed

Similar Questions

• Media Encoder: Error compiling Movie - unknown error

  As the title, I have problems with Adobe Premiere Pro CC 2014 Adobe Media Encoder CC 2014 and - "Adobe Media Encoder: error compiling Movie - unknown error" appears each time I try to export my video. Both are trial versions, but my Adobe Media Encoder CC 2014 had ended and my Adobe Premiere Pro CC 2014 have left about 1 week of trial. Please help as soon as possible because I have to do a large project for my school, so cannot function without these great apps. Thank you.

  Hi Charles,

  Have you tried to export with Premiere Pro?

  Go to the file Menu in Premiere Pro > project settings > general and change 'Mercury playback engine' (if it allows) to 'Only software Mode' and then try to export from Premiere Pro.

  Mention also, what operating system are you using, hard RAM (Exxternal or internal), or several installed graphics cards and formats of files used in the project.

  Have you tried to make the scenario first before export?

  If possible send a screenshot of the full timeline.

  Vinay

• Cannot restore: error compiling Movie: unknown error

  Hey there,

  Need help,

  I'm working on a short sequence (15 seconds).

  It has a few stacked video channels and I have applied overlays and fixed most of the color channels.

  The film is XMF files from a C300. Sequence of parameters defined in accordance with the proposed recommendation (IE when I dropped the clips).

  I get the "error compiling Movie: unknown error" message whenever I try to make or export.» I went through a lot of steps suggested by a blog post, I found here - I went through the sequence, removed the clip, has tried to return, then removed the effects.

  When I deleted the effects and buried the clips off side by side he made out for me.  That's great, but I have to be able to export the effects all in and empty them in layers. What can I do? Starting to pull my hair!

  Details...

  CS6. O

  MacBook, 4 GB Ram,

  Graphics card: NVIDIA GeForce GT 330 M 256 MB

  Thank you,

  Simon

  Hey,.

  Thanks for the tip - tried all of those, unfortunately with no joy.

  I have not deleted my cache - also no joy.

  BUT I installed a (now 6.0.5) update and it does.

  Thanks for the help,

  Simon

• Premiere Pro export takes forever! Even with CUDA enabled! Help, please!

  I am a sequence in first pro CC which is 1 minute and 40 seconds. the details of the sequence are:

  • Video files Blackmagic Pocket film camera ProRes HQ
  • lugins used for color grading on separate clips (as a comparison between the ranks of different color of the same clip) - convert movie, Magic Bullet Looks and three different LUTs
  • I added a box to the letters 1:2.35 on top of all the clips
  • In each clip to identify what plugin or LUT is used for each shot, I have added a little text

  Here are the specs of my computer:

  • Windows 7 Ultimate 64-bit (service pack 1)
    
  • Dual core AMD APU A4-6320 with graphics Radeon HD (overclocked to 4 GHz)
  • NVIDIA GeForce GTX 750 Ti 2 GB (overclocked)
  • 8 GB GDDR5 RAM 1600 MHz (such as two 4 GB sticks)

  Premiere Pro export settings:

  • H.264
  • 1920 x 1080 (1.0 progressive and square pixels)
  • 23.976 fps
  • Profile: high
  • Level: 5.1
  • Go to verified maximum depth (prores HQ bmpcc gets 10-bit)
  • Pass VBR 2
  • Bit rate = 30 target
  • flow rate Max = 40
  • Use disabled previesws because I have not been made in the workspace to verify it would not make much difference)
  • Made maximum use quality - I tried this checked and unchecked with the same time of export for both (I have read the forums where this should be disabled if you have the MPE CUDA enabled in Premiere Pro, because it is heavy CPU, but then some forums say always leave on any - which is really confusing)
  • I'm exporting to a hard drive with 7200 RPM

  Those 1 minutes 40 seconds sequence takes about 40 minutes to export which is too long. \I really need help understanding what the problem is and why export takes so long. Thanks in advance

  SAFEHARBOR11 wrote:

  What I've read above on these forums is that AMD chips lack any set statement that like the first, and that hurts performance.

  I read that too, and when I looked at the instructions mentioned, they were available in the new amd fx chips. the main problem for instructions is amd doesn't have a boost intels 32bits single thread. Intel has been very wise to make a unique help for former thread programs of 32 bits. the real advantage for users is that works of boost for the sloppy, 64 bit programs as bad coding in the adobe software. what it boils down to is intel offer superior performance, but at a higher cost to match. I recommend intel and amd if budget requires.

• Adobe 2015.3 Premiere Pro export settings

  Hi people,

  iMac (27 inch, at the end of 2013)

  3.5 GHz Core i7

  32 GB 1600 MHz DDR3

  NVIDIA GeForce GTX M 780, 4096 MB

  So, updated to 2015.3 and I see on the window of Premiere Pro export settings have changed considerably. One of the big things for me is I can not put my bitrates as I used a high-end and low-end, one pass, re-encoding, etc., which is kind of a big deal to me. Is there something I'm missing here? My old preset still life in Media Encoder but I can't get it to load first because those moments I export only a single video file.

  Any help is appreciated.

  Jim R.

  Well, I don't know what happened, but when I opened just first again (and I did that several times today since updated the software) the old presets were back. When I installed initially 2015.3 he only had like 6 or 7 presets available, now they are all here. Maybe some kind of anomaly or something weird I did initially. Anyway, I'm back in business. Thank you!

• * Error compiling Movie - Unknown Error * when exporting/rendering.

  Whenever I try to export the media or to restore the timeline, he appears with this error. "Film compilation error. Unknown error. »

  

  As you can imagine it's very frustrating, I followed the same process accurate I always did and he have never had a problem previously. No media is missing, and I even tried to use the YouTube preset - wrong again.

  I use first Pro CC 2015 - I even tried uninstalling and reinstalling as update all the CC apps.

  If the first does not know what is the error, how am I supposed to know? Help, please!

  Error compiling movie... some debates and ideas

  -1, create a new project and import the project that has errors and see if that fixes the problem

  -http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-rendering-or.html

  - and nested sequences http://forums.adobe.com/thread/955172

  - and WMV files of http://forums.adobe.com/message/4629210 frame rate

• 'Error compiling movie/Unknown Error' when exported.  Great list of ' things I've already tried ' s

  Alright, move to the bottom line here, I spent the last hours 3 juggling with clips and sequences of trying to get my VERY average project to encode and export.  I get the dreaded "error compiling Movie.  Unknown error message.  But there are a few details as to where it is tripping when exporting; more on that later.

  Technical details: iMac, 32 GB of ram, Nvidia 780 M 4 GB, SSD from all around.

  First of all, a list of "Things I've tried."  Which many were inspired by multiple threads, I've already read:

  -Make sure there is not still images exceeding the size of my project (1080 p) settings.  Initially, there was one, it has since then been swapped for a completely different image/picture.  Still unresolved.

  -Make sure there is no offset image drop-down conflicts happening between clips and my settings.

  -All images is 1080 p, so there is no scale happening (not with any of the effects either).

  -Switching to export "in/out sequence" export "entire sequence."

  -Created a new sequence, dropped the sequence published in project parameters matched, tried to export from there.  Same question.

  -A tried to make CBR instead of the variable.

  -Tried to use all the rendering engines (software only, CUDA, OpenCL, etc..)

  -At least a few other things too, but it's so darn late now for this reason, and so I'm so tired that I can't remembering everything.  I'll gladly take any suggestions and report back.

  
  

  Now, I mentioned we're listening at a specific point.  I often read that he goes somewhere around 70% through and is approximately the same in my case.  He arrives at a specific clip/couple of clips and blocks in almost the exact same task.  I messed with these clips too many times to count.  Initially it has been remapped both with keyframes, so I changed it to a constant speed without keyframes. nothing.  Had a directional blur on one of the clips, so I completely; and no change.  I think I tried other things with that particular section of the timeline, but as I said, I'm falling asleep here.

  
  

  Please. Help.  I'm very, very, very close to deserting a ship to FCPX total after so many bugs and crashes (it is not the only issue that hinder the project, as many of you know).  Currently, I am a user of dual-app, different applications for projects depending on how how "inside" I need to get, or if I work with different people on different systems.  But I need something that is RELIABLE.  This is supposed to be a professional software and probably priority #1 for professionals is reliability.  At least in FCP almost everything runs very smooth, and I did not yet have a "can't f * ing finish a project" problem with her.

  I'm sorry, please excuse my behavior; I'm frustrated.

  We have progress!

  So, I've discovered some interesting things (maybe not interesting for anyone who has had or has solved this problem before, but new to me).  It is a long summary of what happened, but I want to explain how I came to the conclusion I did:

  First of all, I took advice from Colin and created a new sequence with the troublesome section, removed all the audio clips.  I thought I could try so suggestion of Ann at the same time, so I deleted FilmConvert not only the effects but ALL the effects of the clip.  The settings include: Filmconvert, directional blur (which a clip has the sum of retouching), speed of adjustment (without keyframes), then an adjustment layer with a very small amount of sharpening applied to it.  I did not remove anything from the adjustment layer.  I then exported with only "Export video" checked.  It worked.

  So, I really wanted to try to pin-point, in hopes of helping someone else in the future.  It's when things are interesting.  So I went back and started around, keeping the audio off the coast and little by little the effects removed.  He went down to the directional blur, which I completely spaced the same mention, because I forgot a little on this subject in the middle of all this (sorry about, 100% my fault not to mention blur; some of you could see as the issue immediately, had I mentioned).  With everything, but directional blur applied, it has exported.  I even put the audio tracks to, re-checked Export Audio, and everything worked well.  So the blur effect seems to be the question... or so it seems.  Another interesting thing that's happened is that for one of the first attempts to export without audio, I left the blur effect but take off FilmConvert.  It worked as well.  Finally, my last attempt was to export everything, audio and video and all the effects, however, this time I noticed that on the second clip in the sequence I had accidentally put the blur directional above FilmConvert in the effects Panel (the other clips there like the last effect applied).  So I moved it back to the bottom of the chain of effects.  Of course, it worked.

  Finally, and above all, I tried full export with effects in their place.  SOUL crashed, twice.  Frustrating, but unfortunately enough widespread lately.  However, the project is export straight out of first, first try.  Feeling very relieved.

  I guess my question now is... Why?  Is - this common with all the effects in the first of blur?  To summarize what the section of the clips looked like, it's just a quick moment of time being accelerated x 5, with a slight blur to simulate an exaggerated movement too vague.  Yes, I do usually this kind of effects in After Effects, with more control and better results, but the project is a quick and informal editing, so I don't bother at first.  A big thank you to all who contributed to the discussion, if your suggestion has directly touched the issue or not, it's the community to commit that really matters.  I hope that son like this can get small bugs like these resolved or help someone in a similar situation to learn how works the effect controls panel.  Nevertheless, there is useful information on this topic, for sure.  Thanks again to all who have helped me learn along the way.

• Error "Premiere Pro has found no module compatible video conferencing | Start in

  I don't have that basic intel 4600 graphics card hd and that market until today, can you help me

  Sorry for the inconvenience Timothees but there are a few problems with AVG.

  Please visit the sites:

  AVG antivirus causes problems in Premiere Pro that causes an error message (unable to find capable video game modules) when starting

  AVG Antivirus is blocking all my apps CC

  Thank you

  Ilyes Singh

• Graphics card Intel HD 4000 - error "Premiere Pro could not find capable video game modules"

  Hello

  I get this error message when you start Premiere Pro (Macbook Pro - Intel HD Graphics-4000).

  Update of the software/drivers has not fixed the problem.

  Can anyone help?

  Thank you for your support!

  Hello

  Try this:

  Go to the following locations:

  1 location: In the Finder, click go > go to folder > ~/Library/Application Support/Adobe

  Situation 2: Go > go to folder > ~/Library/Preferences/Adobe

  Location 3: Documents > Adobe

  Everywhere, rename the folders 'Adobe' to 'OldAdobe '.

  Launch the first, accept the license agreement and see if it works.

  Note: You will lose your customized workspaces and keyboard shortcuts.

  Thank you

  Regalo

• Premiere Pro update failed: Adobe Premiere Pro CC 2014.0.1 the Update Installation failed. Error code: U44M2P7

  Hello

  I can't update to Premiere Pro. I get the following message:

  Update Adobe first Pro CC 2014.0.1

  Failed installation. Error code: U44M2P7

  
  

  Tried the patch, no dice. He had to avoid re - install.

  
  

  Would like a member of the Adobe staff to step up and help out on this.

  
  

  Thank you
  

  I contacted creative cloud support and they were very helpful. Srishti G managed to solve the problem (some random linked to the Application Manager).

  Happy with the service.

• Workflow trouble: switch to Media Encoder at the queue of Premiere Pro export

  I have a collaborative project where I have to edit and share short sequences of a larger project. Therefore, I do a lot of export and transcoding on the fly.

  My problem is that whenever I use Media | Export | Queue of Premiere Pro my Mac switches focus to Media Encoder. Since I have Media Encoder to transcode automatically I actually don't need to directly interact with it. I don't need to see. I just need to do his thing in the background so that I can continue working on my project.

  No one knows how to stop the switch of focus to Media Encoder?

  I know this isn't a bigger and a quick cmd + tab will switch me back, but still, it's annoying when I really just a background task.

  Thank you very much

  Michelle

  You cannot change this behavior.

  I'm not in favor of having otherwise, but you can drop a

  Feature request/Bug Report Form

• CC Adobe Premiere Pro export excruciatingly slow... Help, please?

  Hi guys, the project of a school in a few hours and I have struggled with premiere pro for nearly 15 hours on a 15 minute video. It's pretty basic, a few images and pictures in 1920 x 1080, but for the life of me will not export this thing. It starts very fast but slows to a crawl and then curls up and stops. My system is not pulling punches: i7, 3770 16 gb 1600 mhz ram, k-2 x 780 ti. Any suggestions? I'm dying here.

  Hey guys, thanks for all the help. I found the problem: Gaussian blur. I got a clip that was about 3 instances of Gaussian blur, adobe was very unhappy about it and refused to make this (even after a line of four hours , he was stuck). If someone experiences this problem, check if you have consciously or inadvertently stacked Gaussian blur.

• Premiere Pro export problems

  I had problems to export from Premiere Pro with my MacBook Pro with OSX 10.9. My exports fell by executives, sometimes black, sometimes green, sometimes with stripes or patterns of mosaic... I tried to update, I tried installing and reinstalling. I tried to export HD 25 p but I also tried to export settings of sequence and that no longer works. I also tried to use Media Encoder. My original film was HDV. Initially, I was working from an external drive WD with FW800 adapter thunderbolt, but I also tried working from an external drive USB3 and also from my internal drive. It makes no difference. The only 'solution' that I found for the problem was when I exported using a friend's computer.

  Before this problem I used Premiere Pro CS6 version because it was compatible with the editing suites I used at my University. But my project developed file some sort of bug whereby it widened almost exponentially whenever he saved. So it became so big (up to 5 GB) that the computer crashed whenever he tried to auto-save. When I converted the project to a CC project that seemed to overcome this problem, so I continued to work with CC of my lap - top. But then I had problems when I first came to export.

  Hello

  Please launch the first pro and click the option to file on the part superior of the Menu and go into project settings

  File > project settings > General > Renderer

  Change the rendering engine for the reading Mercury (CUDA) engine.

  If you do not get the CUDA option in the drop down menu then quit first pro and install the CUDA drivers from the link below

  6.5.18 NVIDIA DRIVERS

  Now launch Premiere pro and select CUDA.

  It will ask you to remove ads sequences, please do and try to export.

  hope that helps.

  Thank you

  Mohd Naseem.

• Adobe Premiere Pro - application failed to start correctly (0xc0000142)

  Hello

  Recently I got this error when I try to start Adobe Premiere Pro:

  

  I tried using the Adobe Creative Cloud cleaning tool to remove all Adobe apps and then put it back, but it did not work. Does anyone have any suggestions? The number (0xc0000142) means something? I don't really know what could have changed to cause the Premiere Pro suddenly do not work.

  Thank you for your time!

  Error 142 Premiere Pro https://forums.adobe.com/message/8352299

• Convert project first Clip for Premiere Pro project fails... What I am doing wrong?

  I created my first video on my iPad and now want to refine the project in Premiere Pro. I looked at him "refine a Clip of first video in Premiere Pro" and followed all the steps, but something is wrong.

  Although the XML file (and Media folder) if poster in my CC property is not available for first Pro CC (2015.2) when I choose «Convert Premiere Clip project...» ».

  I was able to import a video MP4 Roughcut, but cannot change the actual project. I tried to send the bill back (whenever 'Envoys OK' confirmation appears) & reboot PP, but it does not help. I am connected to my Adobe CC account on all devices.

  Really enjoy working with Premiere Clip, but the app is of limited use to me if I can't send Premiere Pro clip projects successfully. Help appreciated.

  Thank you

  Felicia Lovelett

  Hi Felicia,

  Sorry, you have problems! You have the desktop app creative Cloud installed, with synchronization of file running? This will synchronize your projects first Clip and media locally on your computer, allowing Premiere Pro to open. (If you only synchronize your active CC Web Storage, Premiere Pro is not able to access.)

  From the desktop application creative cloud in your menu bar, click the gear icon, and then click Preferences. Click the files tab, and verify that the synchronization is on. Here is also where you can see the location of your creative cloud on your computer folder. When you choose "Convert first Clip Project" in Premiere Pro, it should point to this folder on your computer.

  Please let me know if it helps!

  Thank you

  Bronwyn