Error creating crawl short clover ETL using the component 'SYS_EXECUTE '.

Similar Questions

• Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

    I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

    Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

    OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

  keimanzero,

  Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
  First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

  Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

  Secondly, I suggest that you run the File Checker system while in the same clean boot state.
  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the field search programs and files .
  2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
     If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
     sfc/scannow

  When the analysis is complete, test to see if the problems facing the system have been resolved.

  If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

  Expert MowGreen Windows IT Pro - consumer safety

• Can I automate creating a cluster in LabView using the structure of data created in a generated automatically. CSV, C header or XML file?

  Can I automate creating a cluster in LabView using the data structure created in an auto generated. CSV, C header or XML file?  I am trying to take the data structure defined in one or more of these files listed and have LabView automatically create a cluster with structure types and the same data.  (Ideally, I would like to do it with a C header file only.)  Basically, I'm trying to avoid having to create the cluster by hand, as the number of cluster elements could be very large. I looked in EasyXML and contacted the rep for the add-on.  Unfortunately, this feature was not created yet.  Did anyone done something like this before? Thanks in advance for the help.

  
  

• Hi, I am trying to install Adobe Creative Cloud and I get error 43. I tried to use the Adobe cleaning tool and uninstall but nothing has changed. What can I do?

  Hi, I am trying to install Adobe Creative Cloud and I get error 43. I tried to use the Adobe cleaning tool and uninstall but nothing has changed. What can I do?

  Hi carlottav39691716,

  Please see the following links:

  Error 43 - I can't download any adobe apps CC or creative cloud Manager

  Creative cloud, re-install-Dungeon error 43

  Error in downloading, installing or updating Adobe Creative Cloud applications

  Let us know if that helps.

  Kind regards

  Sandrine Bani

• Error when creating a new DAC connection using the MSSQL connection type

  Hello
  
  I am trying to create a connection DAC, i.e. a new repository DAC in the SQL Server 2008 database.
  Version of the DAC: 10.1.3.4.1
  Database: SQL Server 2008
  
  
  I downloaded from the link below sqljdbc4.jar file and placed it in the D:\orahome\10gR3_1\bifoundation\dac\lib folder.
  [http://www.microsoft.com/en-us/download/details.aspx?displaylang=en & id = 11774]
  
  I entered all the details correctly to the name of the database, the database host, port of the database. I created a new file for authentication.
  
  I get error when I try to test the connection below.
  
  Driver MESSAGE: MSSQL not available!
  CLASS EXCEPTION: java.lang.IllegalArgumentException
  
  com.siebel.etl.gui.login.LoginDataHandler$ LoginStructure.testConnection (LoginDataHandler.java:512)
  com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
  com.siebel.etl.gui.login.ConnectionTestDialog$ Executor.run (ConnectionTestDialog.java:290)
  
  : CAUSE:
  MESSAGE: com. Microsoft.SqlServer.JDBC.SQLServerDriver
  EXCEPTION CLASS: java.lang.ClassNotFoundException
  
  java.net.URLClassLoader$ 1.run(URLClassLoader.java:200)
  java.security.AccessController.doPrivileged (Native Method)
  java.net.URLClassLoader.findClass(URLClassLoader.java:188)
  java.lang.ClassLoader.loadClass(ClassLoader.java:306)
  Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:276)
  java.lang.ClassLoader.loadClass(ClassLoader.java:251)
  java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
  java.lang.Class.forName0 (Native Method)
  java.lang.Class.forName(Class.java:169)
  com.siebel.etl.gui.login.LoginDataHandler$ LoginStructure.testConnection (LoginDataHandler.java:510)
  com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
  com.siebel.etl.gui.login.ConnectionTestDialog$ Executor.run (ConnectionTestDialog.java:290)
  
  
  The error seems to be a problem of connectivity to SQL Server. I use the correct jar file?
  
  Please, help me to solve this problem. Appreciate the help given on this forum earlier.
  
  Thank you

  Add
  .\lib\sqljdbc4.jar
  at the end of the line beginning with SQLSERVERLIB in the file config.bat

  Pls correct brand

• LabVIEW FPGA: Not possible to create an executable file that uses the FPGA in Simulation Mode? I get a weird error code

  When I try to create an executable from a host VI that has an "Open FPGA VI" reference who has run, the value "Dev computer w / Sim i/o" value, the application is built without error but when I try to run it, it opens with an arrow broken to run and has the following error:

  "VI has an error of type 2302200.  The full development of LabVIEW version is necessary to correct mistakes. "In fact, he repeats this message two times in the same window for some reason any.

  Moreover, I * have the LabVIEW full development version and I use 2010 SP1

  While the error message is not as clear as it could be, you're right: you cannot run an executable file that tries to run an FPGA VI in the simulation.  It would be nice if there was an error in compiling.  I always forget to switch to run on the target FPGA before building my application and discover the error until I have it copied on the system in the laboratory.

• "Download failed" error message when you try to use the tab create in Expert mode)

  I use PS 11 elements and following a tutorial that instructed me to click on the tab to create, and then select the Photo book in option (in fact, it does not matter which option - they all produce the same error message).

  I get the initial dialogue, to set the number of pages, etc., but when I click on OK, a window opens saying "active download, please wait". This is followed by an error message "failed download. The server is not available or you are not connected to internet"or words to that effect.

  So far I have checked the software for updates, checked my internet connection and looked into this forum to find answers, but so far nothing has worked.

  Anyone else experienced this?

  I think I can solved the problem by renaming a file (which may have had has been corrupted?).

  Here's what I did:

  "I renamed the file" "MediaDatabase.db3" to "OLD MediaDatabase.db3 ' Library\Application Support\Adobe\Photoshop Elements\11.0\Locale\En_US. restart PSE11 folder and clicked on create, using the default value for an object (A place of Sarcelles) and - after a slight pause while the catalog has been rebuilt - it worked! (previously he had not). Tested with other themes and they were all OK too.

  NB: the path of the file above is on an Apple Mac running OS X Lion mountain - he peut vary between versions of Mac OS X and will certainly be different on a Windows PC (see the post of Surendra, above, for a suggestion of where to start).

• Photosmart HP 6520: HP Photosmart 6520 - error message when you try to use the apps

  I can't access is more apps on my Photosmart HP 6520.  I get the error message "error connection server - 1".

  I don't know if this problem just since I recently changed from a Windows PC on a Mac.

  I very rarely use the apps, so I don't know when it started.

  Everything else seems to work very well I would say.

  Can someone please tell me what could be the cause, or if there is something I can try to sort it out?

  I seem to be going round in circles, and I can't work on what is happening.

  Thanks for your help.

  Hey @TraceyMac,

  Welcome to the Forum from HP Support.  I hope you enjoy your experience here.

  I understand that you are unable to use the pads (Print Apps) on your HP Photosmart 6520 e-all-in-one printer.  I want to help you with this.  A recent installation of printer would not affect your performance of platelets but no loss of connection or wireless Web services could be a factor.

  Note that to access the applications and their use from the front panel of your printer requires two ingredients to be successful: 1) Wi - Fi connection and 2). the ePrint feature (webservices are enabled).

  • Touch the wireless icon () on the front panel of your printer - is the printer connected to your wireless network?  (If not, run the wireless configuration wizard, select your network name/SSID and enter your password wireless reconnect).  If you are connected, proceed as explained below.
  • Tap the icon of webservices/ePrint () on the front panel of your printer.
  • If webservices are not enabled, press OK in order to enable them and allow the automatic updates of printers.
  • This will cause your printer to print an information document describing the characters before @hpeprint.com your printer (ePrint address).  This is known as the claim code.  As another way to use printing applications available for your printer, you can sign in to http://www.hpconnected.com to program applications printing to print and review all the content that ideally will reappear on the front of your printer.
  • From there, you can click the devices tab and use the claimcode to add your printer to the site and take advantage of the available applications, it.

  If these basic steps to respond to a resolution, please, try the following:

  When users encounter this type of problem in general, I suggest from scratch with wireless printer, webservices, and apps printing configuration.  You can clear all of these parameters in a swoop by the factory default restore * your printer.

  Here's how:

  * Note that this step resets the setting up your printer wireless, address ePrint and other custom print settings. If you have created a custom address @hpeprint.com it is permanently erased. For more information about custom addresses ePrint, click here.

  • Front panel of the printer, arrow down and select Tools
  • Select restore default

  Then touch the wireless icon, run the Wireless Setup Wizard to restore your network connection, and then tap the Webservices () and reactivate your webservices.

  If you are able to successfully reactivate your webservices, tap on the icon of your printer wireless () and make a note of the IP address of the printer.  Then, follow these steps to configure a manual DNS:

  • Enter the printer's IP address in a web browser (Chrome, Firefox, Safari, Internet Explorer) and press ENTER to go directly to this page.
  • Click the network tab.
  • In the submenu on the left, click Networking.
  • Then click on the network (IP) address.
  • Click Manual DNS server.
  • DNS preferred as 8.8.8.8 manual entry
  • Auxiliary DNS server entry as 8.8.4.4
  • Click on apply to finalize this change.

  No none of the suggestions above restored the functionality you're looking for?  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to say "You rock!" by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support.  Have a great day!

• Application error 29005 - impossible to reinstall A100 using the recovery CD

  Hi, I need help with the toshiba restore tool...

  I got the blue screen saying the boot not mounted at the beginning and then volume I decide to repair or reinstall the operating system using the recovery CD.
  However, he ceased to work when he came to this screen:

  Toshiba 7.5.1 restore tool

  Progress indicator

  (has no progress in any)

  Statistics
  Completion percentage 0
  Speed (MB/min) 3
  Copied 4 MB
  Remaining Mo 1982
  Time 01:10
  Remaining time

  Details
  Type of local connection
  Partition Type: 7 [NTFS], 38154 MB of original, 2585 MB used, Diskload of Local Q:\BASE\PREINST.6H0 file),.
  38154 MB
  Target partition Type: 7 [NTFS], 38146 MB of drive space [1], 38154 MB
  Current file $MFT 0

  Loading table NTFS MFT

  and then suddenly, it said the Application 29005 error write sector failure: result = 1, disc = 128, 6301439 in 6301503 areas

  Abort 29005

  I don't know what to do to fix this... Please help...

  Hello

  Do you have created all the partitions on the HARD drive?
  Obviously, the HARD drive or partitions on the HARD disk is corrupted.
  In my opinion, that you should first format the whole HARD drive and also delete entire partitions.
  Insert the recovery CD, and then try to install the image of Toshiba.

  Oh, I forgot something; Check if the HARD drive is connected properly

• Can I create two tasks of IA using the same unit of data acquisition?

  Hi all

  Sorry for the question of gumby, but I'm new to all this stuff DAQmx, and I'm trying to understand how it all works.

  I use a USB-6229 with LabVIEW 8.6.1.

  I would use 30 lines HAVE to monitor 30 voltage remote signals.

  I would use the other two lines of AI to perform input voltage independent tasks.

  I tried to create and start the two tasks, but I get an error message when I try to start the second task.  He tells me that the resource is not available.

  What is the cleaner way to configure things working for me?

  Thanks in advance.

  -FB

  Hi diarmaede,

  You can only create one task to HAVE on your card. Read all your DO this card in a loop. You can divide the result and send it to different loops to work on it.

  It will be useful.

  Mike

• Errors during insertion and update form using the VIEW.

  Here is my opinion:

  CREATE OR REPLACE FORCE 
  VIEW  "SH_ADD_EMPLOYEES_VW" ("EMP_ID", "DEPT_ID", "JOB_DESC_ID", "EMPNO", "EMP_FIRST", "EMP_LAST", "USER_NAME", "USER_INI", "DEPTNO", "DEPT_DESC", "ROLES_ID", "ADMIN", "CREATES", "APPROVES", "QUALITY", "CUST_SVC", "SH_LOCAL", 
  "SH_OFFICE", "SYSTEM") 
  AS
    select
  "SH_EMPLOYEES"."EMP_ID" as "EMP_ID",
  "SH_EMPLOYEES"."DEPT_ID" as "DEPT_ID",
  "SH_EMPLOYEES"."JOB_DESC_ID" as "JOB_DESC_ID",
  "SH_EMPLOYEES"."EMPNO"  as "EMPNO",
  "SH_EMPLOYEES"."EMP_FIRST" as "EMP_FIRST",
  "SH_EMPLOYEES"."EMP_LAST" as "EMP_LAST",
  "SH_EMPLOYEES"."USER_NAME" as "USER_NAME",
  "SH_EMPLOYEES"."USER_INI" as "USER_INI",
  "SH_EMPLOYEES"."DEPTNO" as "DEPTNO",
  "SH_EMPLOYEES"."DEPT_DESC" as "DEPT_DESC",
  "DOC_ROLES"."ROLES_ID" as "ROLES_ID",
  "DOC_ROLES"."ADMIN" as "ADMIN",
  "DOC_ROLES"."CREATES" as "CREATES",
  "DOC_ROLES"."APPROVES" as "APPROVES",
  "DOC_ROLES"."QUALITY" as "QUALITY",
  "DOC_ROLES"."CUST_SVC" as "CUST_SVC",
  "DOC_ROLES"."SH_LOCAL" as "SH_LOCAL",
  "DOC_ROLES"."SH_OFFICE" as "SH_OFFICE",
  "DOC_ROLES"."SYSTEM" as "SYSTEM"
  FROM "SH_EMPLOYEES" "SH_EMPLOYEES", "DOC_ROLES" "DOC_ROLES"
  where "SH_EMPLOYEES"."EMP_ID" = "DOC_ROLES"."EMP_ID"
  /
  
  

  Here's my trigger (note - I do not use the EXCEPTION clause or (declaration of it) because it throws an error msg = >: 'This is my message'.) Here, any help would be great as well.)

  CREATE OR REPLACE TRIGGER bi_ADD_EMPLOYEES_VW
  INSTEAD OF insert ON SH_ADD_EMPLOYEES_vw
  for each row
  declare
  duplicate_info EXCEPTION;
  PRAGMA EXCEPTION_INIT(duplicate_info, -00001);
  begin
  insert into SH_EMPLOYEES
  (EMP_ID, DEPT_ID, JOB_DESC_ID, EMPNO, EMP_FIRST, EMP_LAST, USER_NAME, USER_INI, DEPTNO, DEPT_DESC)
  values
  (:new.EMP_ID, :new.DEPT_ID, :new.JOB_DESC_ID, :new.EMPNO, :new.EMP_FIRST, :new.EMP_LAST, :new.USER_NAME, :new.USER_INI, :new.DEPTNO, :new.DEPT_DESC);
  insert into DOC_ROLES 
  (ROLES_ID, ADMIN, CREATES, APPROVES, QUALITY, CUST_SVC, SH_LOCAL, SH_OFFICE, SYSTEM)
  VALUES (
  :new.ROLES_ID, :new.ADMIN, :new.CREATES, :new.APPROVES, :new.QUALITY, :new.CUST_SVC, :new.SH_LOCAL, :new.SH_OFFICE, :new.SYSTEM);
  EXCEPTION
   WHEN duplicate_info THEN
    RAISE_APPLICATION_ERROR (
     num=> -20107
     msg=> 'Duplicate employee');
  END bi_ADD_EMPLOYEES_VW;
  /
  
  

  ERROR ON UPDATE:

  ORA-20505: DML error: p_rowid = 1001,.
  p_alt_rowid = EMP_ID, p_rowid2 = 2, p_alt_rowid2 = ROLES_ID. ORA-01779: cannot change
  a column that is mapped to a table not preserved key

  ERROR WHEN INSERTING:

  ORA-01400: cannot insert NULL in
  ("SPICE_HUNTER1". "" "" SH_EMPLOYEES '. "" EMP_ID") ORA-06512: at
  "SPICE_HUNTER1. BI_SH_ADD_EMPLOYEES_VW', line 3 ORA-04088: error during execution
  relaxing ' SPICE_HUNTER1. BI_SH_ADD_EMPLOYEES_VW' ORA-06512: at
  'SYS. WWV_DBMS_SQL', line 549 ORA-06512: at "APEX_040000.WWV_FLOW_DML", line 1121
  ORA-22816: feature not supported with RETURNING clause

  Error Impossible to process line on table SH_ADD_EMPLOYEES_VW

  I see you manage emp_id is null, you must assign a value if null sequence... This column cannot be null, where the error, and "Edit" a column of this table the DML to this id value.

• Error to fix permissions if I use the backup library

  I have the library on an external hard drive and I starts the backup on a second external hard drive. When I opened the backup of my library in second external hard drive with a photo, it is reported an error to fix permissions. What can I do to use the backup from my library on the first hard drive failure?

  Is what kind of backup?  A Time Machine backup?  A copy of the library? Photos cannot open the library if it is on a volume of TimeMachine.

  And what type of backup drive?  If you want to open a copy of the photo library on an external drive, it's safer, if the file system is Mac OS extended (journaled) and the drive is mounted locally.

  Turn on the indicator "Ignore ownership on this volume" for the external drive the errors of authorization.

  When you select the drive in the Finder and open the Info Panel to the reader by entering ⌘I it should look like this in the "Général" section and in the section "permissions & ownership «:»»

  

• How to create VI execution asynchronous step using the API

  I want to create a "run way asynchronous step VI" using the API TestStand in LabVIEW.

  Navigation on the details of the step and the properties of the object, apparently, that it is a type of 'special' step that is actually a SequenceCall.  However, I don't see how to access the data contained in this type of step.  I enclose my current VI used to 'Browse' the data for reference.

  Please advise on how to create this step.

  Thank you

  Hey LVB,

  I'm sorry, I didn't know that you always wanted to use the "Use the Prototype sequence" checkbox option.  In this case the attached code should demonstrate how this can be accomplished.

  Thank you

• Disk error non system at boot when using the external USB disk

  Hello

  I use Windows 7 Pro.  I have a Seagate external USB disk causing a "Non-system disk error" at startup.
  I had the same problem with a Clickfree drive.
  The problem occurs on my other PC with different versions of Windows.
  How can I get my computer to start and not give me this error message for my backup drive?
  At startup (when the drive disconnected), I get a screen of BACK indicating "Client Mac Addr."... GUID..., DHCP. "I think it's looking for a disk boot from.
  I just need to boot from the internal hard drive.
  Thank you
  AS

  USB external references aren't desingned to be connected on startup, you must also use the safely remove the procedure and disconnect the USB key before closing.

  If you get such a screen "Client Mac Addr... etc" at the start (with usb unplugged), looks like you are using a very old motherboard. If the system starts only with connected usb, then your initial installation of victory is defective or damaged

• I get a 0x80070424c error Code when I try to use the recommended settings for my Windows Firewall

  My PC suddenly stopped sharing music to my Xbox over the 3 days.

  My firewall is weird and it is said that "the Windows Firewall does not use recommended settings to help protect your computer.

  When I click to use the recommended settings, I get an 0x80070424c error Code. I tried following the steps here: http://support.microsoft.com/kb/968002 and it did not work

  Hello

  If you are having problems turning on Windows Firewall, follow these instructions:
  Download and install Windows Repair: '
  http://www.bleepingcomputer.com/download/Windows-repair-all-in-one/
  When repairing Windows opens, click the tab for Startup Repairs click Start. Clear all check boxes except for the following four:

  -Reset the registry permissions

  -Reset the permissions of files

  -WMI repair

  -Repair Windows Firewall
  Then click Start. Once it is finished, restart your computer.
  I hope this helps you.
  Brian