Error creating playlist and cannot rip cd music...

Similar Questions

• I can create playlists, and they are visible under playlists, when I close wmp 12, they no longer avaialable

  I use an Asus Zenbook UX 31 win 7 pro.

  I can create a playlist and use and it is visible under playlists, if I close wmp 12 and re - open, the reading list is no longer available.

  If I open the rip folder playlists, I created at different times are stored in the folder located in the rip folder selections.

  Selected playlists and auto are affected.

  Any help would be appreciated

  Cordially CB

  Hello

  I understand that when you close Windows Media Player 12, you can't see the playlists. I understand the inconvenience.

  I suggest you run Microsoft Fixit mentioned in the article and see if it helps.

  Solve the problems of Windows Media Player video and other media or library

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

   

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

   

• Error code: C00D0FD6 and can not read music and games.

  Original title: music & games

  Hello Jeremy,.

  I posted this message because I have two problems, one of which is on WMP, I wanted to play a game and listen to the music, but I found that the drive was not working as usual so I left, go for him again once I found that he remained the same when I got to the dialog box that there is a problem check what he was He said I have met and the error message that is C00D0FD6, if you ask me to go toTools and click onPlugins I was Tools but could not find Plugins is an alternative to the difficulty of WMP, don't know if that makes a difference, but it's version is 11.

  Come to the 2nd problem, he is playing the music files, I looked for a particular mp3 file which comes one numbered (e.g. 07?.) WMA) WMA, convert MP3, it still does not play, would it be because it's a numbered file?

  Thank you

  Sincerely,

  Frampton rocks

  y at - it freeware, DRM to MP3 Converter I download/install?

  No, if a file is protected by DRM, so it is impossible to remove this protection (otherwise, the protection would be quite useless).

  Now on the extraction of CD, I had snatched a because its tone was a little too low, so I had to adjusted WMP eq, after burning the files that I went to read the drive CD, but to my surprise it not played - No Disc, try on MP, he did play - what's the big idea? !!

  WMP is probably set to burn data CDs containing MP3s, instead of CD audio real. Most CD players can only play the button burn to audio CDs. click right WMP above, make sure the Audio CD is checked and burn the CD again.

  Also, note that the settings of the equalizer in WMP have only effect during playback of songs. They do not change the audio data, so you won't hear any difference when you save the files again.

• Error creating of databases - cannot load the library backend "oci.dll.

  Hi all
  I'm newbie Timesten IMDB (in memory database). I do not wish to use oracle RDBMS.
  
  I installed the Timesten IMDB on Win2003.
  
  E:\TimesTen\tt70_32\bin > ttVersion.exe
  TimesTen release 7.0.5.0.0 (32 bit NT) (tt70_32:17000) 2008-04 - 05 T 00: 54:16Z
  Forum admin: m4sadm
  Home Directory Forum: e:\TimesTen\tt70_32
  Demon base directory: e:\TimesTen\tt70_32\srv\info
  
  
  When installing, I followed the Viewlet at: [http://www.oracle.com/technology/products/timesten/viewlets/tt70_install_win_viewlet_swf.html]
  
  Now, I'm planning to create a database and therefore the Viewlet subsequently: [http://www.oracle.com/technology/products/timesten/viewlets/tt70_create_db_win_cc_viewlet_swf.html]
  
  However, when I give the command (according to the Viewlet), I get the following error:
  Command > select * from v version $;
  5102: unable to load library 'oci.dll' for Cache Connect backend. "< Empty > OS error message."
  The command failed.
  
  
  Can someone provide pointers to solve this problem?

  It is perfectly possible to use TimesTen as a stand-alone datbase without a backend Oracle database. TimesTen is a comprehensive database full and includes the persistence and the HA according to the needs. Many customers use TimesTen in this way. To do this, you must:

  1. to install time only install the abd TimesTen IMDB do not install TimesTen IMCD (in-memory database cache) option.

  2. in the configuration data store (s), do not include in your ODBC attributes everything related to implementing caching Oracle.

  3. understand that while TimesTen can act as a cache for oracle data and supports much of the same SQL etc. Oracle, there also a lot of differences from oracle. Such a difference is that TimesTen does not have the various V$ tables Oracle's. When you use TimesTen you yourself need to restrict things that supports the TimesTen.

  Chris

• Desktop HP Pavilion p6-2380ea: error AVG firewall and cannot install Windows updates

  HP Pavilion p6 2380ea desktop PC

  8.0 Windows improved to 8.1

  After recently making a system restore because my internet security AVG said there is a firewall "error". The system restore has not resolved the situation with the firewall. My PC is also impossible to install updates. There were more than 85 updates recently [932 MB], some have been installed, today I managed to get this up to 75. The point being no update will be that which leaves my system vulnerable to attack or make it unstable? Can someone advise me a solution to get around this PC does not complete a cycle of update?

  I noticed when using the HP Support Assistant, it will be impossible to complete "Download HP PC Diagnostics UEFI" tool.

  The second problem is in the lower part of the tool bar right, that a 'bubble' guard informing them of the low disk space you run lack of disk space on the recovery image [d]

  Click here to see if you can free up space on this drive. Once more can someone advise me a fix?

  Roger271112

  Please check this FAQ of AVG, more will help you

  http://www.Avg.com/EU-en/FAQ.Num-3265

  o fix to your problem, follow these steps:

  (A) check if no program on your computer may be in conflict with AVG Firewall (e.g. another firewall, utility of filtering and monitoring of anti-virus or network), try to remove the conflicting program.

  (B) If no conflicting program is installed, try to reset the configuration of the firewall, it will solve the problems caused by a corrupted configuration:

  To reset the configuration of the firewall:
  1. open the AVG program.
  2. click on the firewall component.
  3. click on refresh configuration.
  4. follow the steps displayed to reset the configuration of your firewall.
  5 restart the computer.

  After the computer restarts, you can be presented with associated applications firewall AVG dialogues you have previously allowed or blocked.

  (C) if the problem persists, perform an AVG repair installation

  To perform a repair of AVG installation:
  1. download the latest installer on this Web page:

  http://www.Avg.com/download.PRD-ISC.line-2012
  (AVG Internet Security 2012)

  2. click on the "Download" button and when asked, choose to save the file.
  3 choose the desktop and then click Save.
  4. double-click on the AVG installation file.
  5. click on repair the installation and follow the instructions in the wizard.
  6. when the installation is complete, restart the computer.

  (D) if the problem persists even after the repair facility, send diagnostic Support AVG from your computer data.

  To send the AVG Support diagnostic data :
  1. download runner.avgdx on this link:
  http://www.AVG.com/filedir/util/support/runner_en.exe

  2. double-click on the file, the AVG Diagnostics tool runs automatically.
  3. Enter your email address and a detailed description of issue in the appropriate boxes.
  4. click on 'results diagnose and send '.

  This will provide AVG with support additional program log files and data, allowing them analyze the problem and find the right solution.

  See you soon

  Mohammed Hamed

• Error BCCode: 1000008e and cannot print using Microsoft word or excel

  Original title: I have 2 questions.

  (1) error message (BCCode: 1000008e - BCp1:c000005 - BCP2:BF9472FD - BCP3:AB6A91D4 - BCP4:0000000 - OSVer:5_1_2600 - SP:3_0 - product: 256_1)?

  (2) I have HP LaserJet 6 L printer and it will print the test page put not print other pages to print such as word or Excel.... etc? Note that the test page didn't print that from the printer not your PC

  Hi TurmanTurman,

  1. Did you the latest changes on the computer?
  2. Exactly when you receive the error message? You are able to boot into Windows after the error message?
  3. You are able to print using WordPad or Notepad?
  4. What happens when you try to print using Microsoft word or excel?

  The stop error 0x0000008E occur mainly due to the following:

  • Drive hard damage
  • Problems of material General configuration with the BIOS, memory, hard drive, or with other devices
  • Incompatible device driver
  • Incompatible software

  Check out the articles below and try the steps mentioned, check if it helps.

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"

  http://support.Microsoft.com/kb/945658

  You may receive an error message on a Windows-based computer: "STOP 0 x 00000050" or "STOP 0x0000008e"

  http://support.Microsoft.com/kb/903251

  I suggest that you see if you can print using WordPad or Notepad on the computer.

  If you are unable to print only when you use the Microsoft office application then I suggest that you post your question in the forums of Microsoft Office.

  http://answers.Microsoft.com/en-us/Office/Forum

• My laptop does not recognize the cd/dvd drive, gives the error message 19 and cannot load/reload driver TSST. Any suggestions?

  Device Manager says: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged (code 19).»  Mr. Fix - it (Microsoft) indicates the CD/DVGW TSSTcorp TS-L632M ATA Device drivers & filters are corrupted or damaged.  Mr. Fix - it could not download the updates/drivers for TSST.  Mr. Fix - it has been able to get the computer to recognize, but unable to take the function of CD/DVD.

  Hello

  Perform the following methods and check if it helps.

   

  Method 1:

  Please run the difficulty of following article and check if that helps.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

   

  Method 2:

  You can read the following article to see what might cause this problem.

  When you insert a CD or a DVD, Windows Vista may not recognize the disc

  http://support.Microsoft.com/kb/939052/en-us

  If you had recently upgraded the computer to the Vista operating system or install the Service Packs, then try the steps as described in the following article.

   

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

  http://support.Microsoft.com/kb/929461/en-us

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/  

  Hope this information is useful.

• error code 800F080D and cannot install winzip

  Hi, my question is my pc caanot install winzip. When I update the window appears the question like this: error code 800F080D. How to solve this problem?

  Thanks for your help!

  Thank you.  These screenshots have helped.

  For the Fixit, you press the Fixit button and it will give you the possibility to check run aggressive Mode.  Do not check it.  Press the next button.   It should work in default Mode.  Restart Windows Update - if it did not work, run the Fixit in aggressive Mode

  To run it in aggressive mode, check the option of aggressive Mode when you press the fixit again.  Restart Windows Update

  http://support.Microsoft.com/kb/971058

  If successful with Windows Update you must do more.

  Rename the Software Distribution folder-

  Follow directions here - don't forget to right click on the command prompt window and select run as administrator

  http://www.ehow.com/how_7182602_rename-software-distribution-folder.html

• I get error code 800703FB and cannot get Microsoft updates.

  I can't find all the information that tells me how to solve this problem.  Can anyone help?

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• I get the error code 204 and cannot install the creative cloud. Need help!

  Currently, I'm trying to install the creative cloud but error: 204 keeps popping up stating «It seems to be a problem of access to a critical file for download...» »

  Can someone help me?

  Thank you

  For this a little late but I just had this problem and it was my malware program which was causing the problem. Just turn it off and it works perfectly.

• Error Microsoft FIXIT and cannot install Windows Media player

  Original title: microsoft solve this report: cannot install Windows Media Player 9 because the folder permissions used by W.M.Player need to be repaired. How can I do this?

  Windows xp pro, windows version - 5.1, arch / x 86 re

  Kostas,

  Thank you for the information required on this issue.
  
  Please provide the following information:
  
  Have you been able to solve the problem after following the methods?
  We would like to know the status of this problem now after following the proposed methods previously.
  We know with the results on this issue.

• I get 0009C error 48 code and cannot solve the problem?

  This problem has occurred continuously for more than a year. Don't know what that means. Impossible to find similar problem is your forum.

  When you get this error?

• Get error 80072745 code and cannot access the Messenger. All solutions

  My question is simple... I can't access Messenger, either through my account or web access.  I either get error 80072745 or I see loading forever program.  I can't even to check the options or paly with parameters.

  Hello

  they will help you with your questions/problems Messenger when repost you the link below in the Messenger forums

  http://windowslivehelp.com/product.aspx?ProductID=2

• AppleScript: Select the audio files in the Finder, to create playlist

  So, I have modified this Applescript courtesy of WoodenBrain and tried to deconstruct to use. What I need to do, is to be able to select the audio 3-4 files in the Finder, then contextually, select the function "Add to iTunes Playlist", that iTunes ask me for the name of the playlist, create playlist and add files. The script below which realizes, but has an additional step that allows you to select available playlists. I want to remove and don't have iTunes adds the music files to the newly created playlist.

  I know that the solution is somewhere between the block of choice, but I can't seem to get the name of the created playlist and use the the_plvalue. Any ideas?

  on run {parameters}

  Try

  Activate application "iTunes."

  say application "iTunes."

  define newFile to the text returned by (display dialog box default response "Playlist name?" » »)

  make new user playlist with properties {name: newFile}

  set the_playlists to the of each user playlist whose name friendly special is none and smart is false

  the value the_playlists to iSort (the_playlists) to me

  (* to remove the next block *)

  say me to the value the_choice to choose from the list the_playlists with prompt "Add selection to this playlist:

  If the_choice is false then error

  the value the_pl to issue 1 of (every playlist whose name is the_choice)

  (* end choice block *)

  activate

  the value reduced to window 1 to false

  the value cn to (number of points in entrance)

  Repeat with I have from 1 to cn

  say application 'Finder '.

  game of the_item to (point as aliasentry, I)

  If I = 1 then set iname to the name of the_item

  end say

  Add the_item to the_pl

  end Repeat

  end say

  end try

  back entrance

  end run

  on iSort (_list)

  _length set to length of _list

  If _length > 1 then

  Repeat with I have since 2 to _length

  Set temp to the point I of _list

  set j to i - 1

  Repeat while (not (j = 0)) and (point of _list j > temp)

  set agenda (j + 1) of _list to the point of _list j

  set j to j - 1

  end Repeat

  set agenda (j + 1) of _list to temp

  end Repeat

  end if

  return _list

  end iSort

  on is

  Hello

  Put the output of the command of playlist make new user in a variable.

  No need of a loop, the add command takes a list of files.

  -----------------

  the term {parameters}

  Try

  Tell application "iTunes".

  activate

  the text returned by the value tNom (show the default dialog response 'The Playlist name?' » »)

  the value of the_pl to the new playlist user with properties {name: tNom}

  Add entry to the_pl

  reveal the_pl - show the new playlist

  tell the end

  try to end

  Back entrance

  end of race

• WMP NOT ME LETS NOT RECORD SOME MUSIC FILES ON MY EXTERNAL HARD DRIVE I ADDED IT IN ORGANZE AND AN ERROR POPS UP IT CANT RIP, ONE OF THE FOLLOWING SONGS HE USED TO STORE THEM THERE BUT IT WON'T SAVE TO THE FORMAT MP3, FORMAT OR ANY SIZE

  IT CAN'T SAVE MY MUSIC FILES IN MY EXTERNAL HARD DRIVE TO FORMAT, MP3, FILES I WENT TO ORGANIZE AND CELA HAS CHANGED OUTSIDE AND I GET AN ERROR SAYING THAT IT CANNOT COPY ONE OR MORE OF THE SONGS

  Try to run, type: diskmgmt.msc in msc, locate & L.click hard disk, go to actions, all, search &

  Select 'Enable' closing msc... Also, in WMP, go to tools, options, 'music rip tab' select external

  HD as a default value, leave options, or change the other tabs as necessary.