error date time

Similar Questions

• CF8 Mysql ODBC valid Date / Time 0000-00-00

  CF8 and MySql 4.1.10 MyISAM on windows 2003 webed
  
  Some of my DBs have 0000-00-00 dates.
  
  It was not a problem in CF7, but now in CF8, after doing a basic select invalid error date / time.
  
  Select * from shops Where State = "NJ".
  
  ' Cannot convert value ' 0000-00-00 00:00:00 ' 12 timestamp column.
  
  I found a work-around, if I change the Data Source driver of "MySql (4/5)" to "MySql (3)" everything works as it did in CF7.
  
  My concerns are:
  
  (1) am sacrificing performance by the use of the wrong driver?
  (2) what will happen when I switch to MySql5
  (3) is one zero date a bad coding practice? (should be NULL)
  
  Thank you
  Thomas
  

  one way is to add the zeroDateTimeBehavior = convertToNull to the URL of the DSN

  http://dev.MySQL.com/doc/refman/5.0/en/connector-j-reference-configuration-properties.html
  HTH
  --
  Tim Carley
  www.recfusion.com
  [email protected]

• root properties in the connected data store: error when accessing the date/time storage

  When you browse the properties my connected data store I get an error message when you try to read the value of the property of 'storage date/time': object doesn't support this property or method.

  Here is a minimal example:

  Dim oMyDataStore, MyProperty, oMyProperties
  
  Set oMyDataStore = Navigator.ConnectDataStoreByParameter ("TOC", "" & "C:\Program Files (x 86) \National 2012\Examples\Data\Example_data.tdm" & "" ')
  
  Set oMyProperties = oMyDataStore.RootElements (1). Properties
  
  For each MyProperty in oMyProperties
  
    Call MsgBoxDisp ("property name:" & MyProperty.Name & + "\n"&"property value:" & MyProperty.Value "")
  
  Next

  Why can I not access this particular property by default?

  Hi Phex,

  for the date/time properties, an object called UsiTimeDisp is returned. This object allows to that extend features of service as access to each part separately (day, year, hour, seconds,...) of your date/time value. If you want to print the value of time with MessageBoxDisp, you can use the VariantDate this object property.

  Your code might look like this then:

  Dim oMyDataStore, MyProperty, oMyProperties
  
  Set oMyDataStore = Navigator.ConnectDataStoreByParameter ("TOC", "" & "C:\Program Files (x 86) \National 2012\Examples\Data\Example_data.tdm" & "" ')
  
  Set oMyProperties = oMyDataStore.RootElements (1). Properties
  
  For each MyProperty in oMyProperties
  
    MyProperty.DataType = eTime Then
  
      Call MsgBoxDisp ("property name:" & MyProperty.Name & + "\n"&"property value:" & MyProperty.Value. ' ") VariantDate)
  
    On the other
  
      Call MsgBoxDisp ("property name:" & MyProperty.Name & + "\n"&"property value:" & MyProperty.Value "")
  
    End If
  
  Next

  I hope this helps.

  Good day

  Eva

• conversion of the error of date / time when using easy excel reports

  I export a 2D array to an excel file using Excel reports easy vi. I have no problem with that. My data has a number of areas with different formats (text and date/time). My problem is the following:

  * some (in other words, not all data is in the same worksheet) the veiled values of date/time to mm/dd/yyyy format whereas they should be in mm/dd/yyyy (is the excel format it is y in!). Essentially, I have 30/09/2008 (September 30, 2008) in a cell. After ticks on Oct. 1, it will display the date as, 01/10/2008. Excel thinks that this date is in the format dd/mm/yyyy.

  This is a known error in earlier versions of Excel (2002), in particular when you convert a .csv, .xls file. The solution, it was not to add "Local: = True ' at the end of the vba command string (see here: MS Knowledge Base). Here, in LabView I'm not sure how to proceed.

  I tried to change the format of the column in question to the 'text' by calling an Excel Macro in LabView, but do you think I can find the vba command to do? No, not so much.

  LabView saves the Excel file in 97-2003 format (I use MSOffice 2007) and I wonder if the version they are using does not consider the time correction, as described in the knowledge base (or if it applies).

  Any suggestions, I'd love to hear from you.

  Kind regards

  David.

  Hi LaRisa,.

  I was able to find the cell Format Excel set vi and successfully change the format of the value of the cell. It wasn't until I had found the vi that I realized that I've been down this road before. Change the format after the table has been created does not change values dd and mm switching that has already occurred. However, if I did before I "created the table" (or vi Excel table) and set the format to be '@' then it displays the string like 'Text' in the Excel file. That's nice. I can control what cell, row, or column to format now. If I want to be in a date format then I must apply the Format of cell vi after the easy Excel table vi.

  It sounds like a stupid race around me...

• TDMS of MDF time stamp conversion error / storage date time change

  I fought it for a while, I thought I'd throw it out there...

  Let's say I have a file TDMS which has a channel of labview time stamp and thermocouple 2.

  

  I load in DIADEM, I get this:

  

  Perfect!  But now let's say I want to save the PDM as a MDF file so I can see him in Vector sofa.  I right click and save as MDF, perfect.  I started couch and get this:

  

  The year 2121, yes I take data on a star boat!  It seems to be taking the stamp of date/time storage TDMS as starting point and adding the TC_Timestamp channel.

  If I change the channel of TC_Timestamp to 1, 2, 3, 4, 5, 6, 7 etc... and save as MDF, I get this:

  

  Very close, 2012!   But what I really want is what to show of the time, it was recorded what would be the 10/09/2012.

  The problem is whenever I do like recording, date storage time is updated right now, then the MDF plugin seems to use it as a starting point.

  is it possible to stop this update in TIARA?

  

  Thank you

  Ben

  Hi Ben,

  You got it right that the MDF use written the time of storage to start MDF that is updated by DIAdem when writing time. We are working on this and will return to you, if there is no progress.

  To work around the problem, you can try convert TDMS MDF in LabVIEW storage vis.

  Something like the following, you can write your start time of measurement to the MDF file.

  

  Hope this helps,

  Mavis

• Write the Date/time value to a Ms Access table

  I have a headache. Here is the statement I send and the error I get:

  INSERT INTO VALUES (TestID, DateTime) measure (8732, #' 2015 - 01 - 28 16:17:58 ' #);

  NI_Database_API.lvlib:conn Execute.vi-> 2.vi Untitled-> Untitled 1. VIADO error: 0x80040E14
  Exception occurred in the Microsoft JET Database Engine: syntax error in INSERT INTO statement. in NI_Database_API.lvlib:Conn Execute.vi-> 2.vi-> vi Untitled 1 Untitled.

  I tried most of the possible combinations of #, "," around the datetime string and I also tried datetime string formats YYYY/MM/DD hh: mmS AM/PM, DD/MM/YYYY "

  In writing to the other data fields don't cause any error, I only get the syntax error when I try to write in the DateTime field (data type Date/Type)

  I use LV2012 with database connectivity kit and MS Access 2010 (stuck with it, cannot be changed). Same problem with the connection of the user DSN or UDL (jet engine).

  It works with the DB tools Insert Data.vi but we want to use a direct INSERT statement using the DB tools run Query.vi, because we have had a few locks error 0 x 80004005 which can be caused by the DB tools Insert Data.vi using ADODB. Recordset.

  Is attached the vi that I use for debugging.

  Ben64

  Finally found the problem!

  Even if the data type is Date/time in Access, and it is possible to define the name of the DateTime field it seems to be a small Word when you use a SQL statement. The solution is to add DateTime hooks like this:

  INSERT the EXTENT (TestID, [DateTime]) VALUES (1,'2015-01-28 06:52:16 ');

  Thanks for your help Cosworth.

  Ben64

• CMOS Date/time not Set__CMOS Settings Wrong

  Hello

  I use Windows XP and Vista.

  When I turn on my computer, it displays the error message:

  CMOS Date/time not set

  Fault of CMOS settings

  How could I solve this problem without changing the motherboard?

  Replace the CMOS battery. It's cheap (~ $5.00) and easy. After replacing the battery, you will need to go into the BIOS to set the date and time.

  How to replace the CMOS in your PC battery -http://www.liverepair.com/encyclopedia/articles/cmosreplace.asp
  How to replace the CMOS battery - http://www.computerhope.com/issues/ch000239.htm

  MS - MVP - Elephant Boy computers - don't panic!

• How to connect a container ActiveX to a chain of Format Date/time control

  Hello

  I have an ActiveX container with the Date of Microsoft & Time inside selector object. I am trying to connect to control of the Format Date/time string. When I do that, it gives me an error saying: "You have connected a polymorphic terminal that cannot accept this type of data."

  What should I do?

  Kind regards.

  

  Is that what you want to do?

• time and Date/time in seconds

  Judging by some than others, it is a long-term problem.

  With the help of LV 8.6 incidentally.

  I'm trying to convert a date/time for LV timestamp format using the vi Date/time of seconds"." Recently converted time has been displayed as an hour before (I am in UK & DST is now in effect)-a problem I thought that I had healed.

  I wrote a simple test for the VI program (create a constant of the entry and use it to drive a bundle of cluster name to set s/hour/day/month/year etc.) With the function in a loop (0.5s) I have controls to change the month and isDST in the folder & isUTC in the function call - and displays the output in the form of stamp and as EXT. If the month is Pre-dst, everything is ok (for example, an hour of 10 stays at 10), if the month is 5 (DST) then the hour at 11 awards - unless isDST is set to 1 and isUTC set to false. but when this combination of controls is used with the months, a value of 2 - time becomes 9.

  As I say, I thought I had it healed and remember something on the Windows DST flag - and I had recently exchanged PCs - so I turned off the Windows DST (wDST) - no effect. This morning, I rebooted the PC to watch once again this program - to my astonishment, that the 'problem' had gone. I then checked the wDST it was always off. I stopped the criterion VI and closed and on wDST when you attempt to reload the VI of test I had a very weird error message telling me that my VI disk did not 'part of LV in memory' and inviting me to "come back". I stop LV completely rebooted and got the same effect. I restarted the PC and 'come back' was gone and the problem returns (wDST checked).

  So my initial dose had been disable wDST on my m/c origin.

  However, my query is what is the point of setting Date/time to seconds isUTC - it seems doing nothing like what he promises. What little LV blocks also on after I closed the program remember probably the DST Windows defining - maybe wrongly?

  
  

• I get the certificate error every time.

  To the right, when I try to access AKO, army knowledge online (www.us.army.mil) I get the certificate error every time.  Not only I got one when I first on the site, but also when I try to access my mail from the army and other features of the site.  I checked the settings of date and time, and they are all correct.  Also, the certification is valid until 2012.  Any help would be greatly appreciated. P.S. I am using XP

  It is simply because Microsoft does not charge the military by default root CA certificates.  All you need to do is load the certificates on your computer.  To do this, the instructions are on this Web site:

  <>http://dodpki.c3pki.Chamb.DISA.mil/rootca.html >

  HTH,
  JW

• I need to know the file current date/time number stamp and the version of "spoolsv.exe" in Vista Home Premium 32-bit with SP2.

  I need to know the file current date/time number stamp and the version of "spoolsv.exe" in Vista Home Premium 32-bit with SP2. My spooler file got corrupted and I need to know what that the stamp of date/time on the latest version of the file: spoolsv.exe. I did a search on my hard drive and found 8 copies of the file with 7 different dates. I need to know which copy in my file C:\windows\system32\. I suspect that the problem was caused by some kind of malware. I think that some of the different versions on my machine of the initial installation of the Vista, SP1 and SP2. 3 copies that would explain. I tried all the suggestions in this forum and several others. I tried sfc/scannow and it simply replaces the corrupted file by another. I understand how works this file and a simple copy will do the trick if I knew that the file to use. I know that I don't want to go back to the first version of 2006.  BTW... my symptoms are all my printers have disappeared, and when I try to 'add a new printer' I get an error message saying that my spooler service does not work. When I opened my services window it shows that indeed, he is arrested, but I will not start because the description column contains only the code garbled machine indicating that the file is corrupted, or it may contain a virus. I had been using F-Prot until this virus got by and now I use AVG. I scanned my machine with several cleaning packages and it is is more infected, but I worry that from this corrupt file grow something. I know that the problem is not with my printers or drivers, because everyone on my home network can print on all of my printers. None of the people I know are on Vista 32 bit. They are all running System 7 or XP. I have XP, except that a few years ago I suffered from the "Syndrome of Pepsi" on my laptop and when I bought a new HP, it came with Vista.

  Version 6.0.6002.18294

  Day 17/08/2010

  Duration 14:11

  Duration may vary in different time zones.

• Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes.

  Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes. I tried to reinstall vista without success of the problem being fixed

  Hello

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Behavior of the data import wizard when he meets a date/time field

  Hello

  Recently, I downloaded SqlDevelper 4.1.2.20 and used the wizard importing data for the first time.  In general, this has been a process easy and simple to use.

  I noticed a strange behaviour and I was wondering if that was seen by someone else.

  On importing data from an Excel worksheet, I met several fields with the date/time data,

  The Import Wizard is almost always empty the format field and showed in the "Columns of data sources" section this column and EACH column of data once it is in error.

  Once you get the correct format, I often found that I have to press the 'Back' button to clear the other columns of data to be deceived.   And, in some cases, I saw where the columns previously posted were then marked as error.

  Basically, anything after the column date corrected was wrong until an update of the "Source of data columns" has been done.

  If anyone else has noticed this?

  RandyN

  haven't noticed, does not mean that it is not a problem

  If you are an employee of the Oracle, send me an email with the details

  If you are not an employee of the oracle, email me anyway, with your sample excel worksheet and table DDL and I'll take a liquidator. Or open an SR with MOS (preferred)

• Date/time/web address stamp - printing problem

  My printer has always printed the stamp of date/time/site address when the Web well above the edges of the paper up to a month. Now print only about 1/5 of the line and is not readable... other 4/5 printing is above/below the edge of the paper down. I adjusted the margins and the header/footer settings and that did not solve the problem. Any help is appreciated. Have an officejet all-in-one 4620.

  I solved the problem myself... I printed some photos and on properties that I chose without borders, as opposed to (default) border... by trial and error, I found that it was the problem. When I chose with border, the info will print correctly.

• Converts a date into a date/time object string

  I have a JDBC call to enter data, including a date/time stamp.  For the life of me, I can't understand how to convert this string to a date/time field correct.  It is important, because I need to use validation strings to present a time more simplified users on a form.  But I like to keep the original date/time, so I can insert it again into a SQL db at the end.  I created a test process, so I can watch the progress.

  
  ' input string = ' 18/08/2010 16:41:23.

  Expression = dateTime-analysis-withFormat (/process_data/@datestring,"yyyy/MM/dd hh', 'FR', 'US', 'WIN',"CDT")
  
  Result = 18 August 2010 22:41:23 this
  
  So I try to put this value into a date field and I get the error:
  : Invalid ISO8601 DateTime:August 18, 2010 21:41:23 GMT:java.text.ParseException: date of: "August 18, 2010 22:41:23 this."

  
  I tried like 100 different variations to associate with an object date and time with the same result.  I can use the functions of analysis-dateTime or analysis-dateTime-withFormat throughout the day, but I can't get this string value in a proper date field.  Any ideas?  Please help as I'm about to pull out my hair... ... who won't be pretty.

  (Note: I know that my time zone came through OK but I am not concerned about it right now)

  To resolve this problem, I use ExecuteScript activity with the code:

  import java.util.Date;
  import impossible;

  String dateString = patExecContext.getProcessDataStringValue ("/ process_data/@input");

  SimpleDateFormat formatter = new SimpleDateFormat ("yyyy-MM-DD hh: mm :"); ")
  Date date = (Date) formatter.parse (dateString);

  patExecContext.setProcessDataValue ("/ process_data/result", date);

  where

  entry - process line with the dates of the string variable '2010-01-01 23:59:59 '.

  Date - date process variable