Error device PhoneCallLog 8830

Similar Questions

• HP s 4540: error device Base system in 10 windows Device Manager

  Error device in system in the Device Manager in windows base 10.

  How can I solve this. Thank you.

  ID

  PCI\VEN_197B & DEV_2393 & SUBSYS_17F6103C & REV_30
  PCI\VEN_197B & DEV_2393 & SUBSYS_17F6103C
  PCI\VEN_197B & DEV_2393 & CC_088000
  PCI\VEN_197B & DEV_2393 & CC_0880

  PCI\VEN_197B & DEV_2392 & SUBSYS_17F6103C & REV_30
  PCI\VEN_197B & DEV_2392 & SUBSYS_17F6103C
  PCI\VEN_197B & DEV_2392 & CC_088000
  PCI\VEN_197B & DEV_2392 & CC_0880

  Hello:

  You need this driver for both ID's

  The media JMicron card reader driver allows the card slot multimedia integrated in the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63637.exe

• error device "sequence contains no matching element.

  Hallo,

  I just got the VirtualBench and I could use it as I connect it for the first time. I then downloaded and run the program to Window7, so that I would be able to run the program from my PC.

  Since then, I can't work increasingly with the virtualbench. It still gives the same error: device error: sequence contains no matching element.

  What it wronf what should I do?

  Note: I've read a similar question, but it seems that the error missing somehow for some unexplained reason. So, there was actually no mentioned of solution for this problem.

  Thanks in advance for any help.

  Hello Zach Hindes,

  Your idea has solved my problem.

  After the zero (button at the rear of the instrument virutalbench) I could successfully start the application. The error message disappeared and I could interactively use the instrument interactively.

  I reinstalled the software on my PC (Win7) and it runs smoothly also.

  The solution is so simple that I wonder that I wasn't thinking about him in the first place...

  Then, I suggest that developers could add the suggestion to reset the error message. I am sure, that would help a lot of people.

  with my best regards

  Stone

• Error "device ID is not valid" USB-6501?

  Hello

  When I run the script "USB-6501 Control.llb Interactive", I have this error "device ID is not valid"?
  If you know another script that animates the "USB-6501" to check its lines, please help me?

  Best regards

  Right now, I don't have the time to look in the code example, you provided...!

  But why not use DAQmx functions OR DAQ Assistant to write code with whatever functionality you need...?

• Source:-elxcna (adapter Emulax CNA) event ID:-129 error:-\Device\RaidPort1, restore the device, has been published.

  Hi all

  Source:-elxcna (adapter Emulax CNA)
  Event ID:-129
  Error:-\Device\RaidPort1, restore the device, has been published.
  Server:-Server Rack, Windows 2008 R2
  Installed application:-installed Backup tool and IBM tape library connected by Cisco nexus switch

  Summary:-each time the backup tool initiating any SCSI command etc. for library of tapes, just after a few minutes in the event log, server shows "restore the device, \Device\RaidPort1, has been issued." and the tape library configured in backup tool disconnected from the physical tape library.

  Up to now steps below was taken but no luck:
  1. test Unit Ready has been disabled in the registry
  2 adapter ANC, fresh of zoning has been replaced.
  3 firmware and driver from the adapter of the ANC has been updated.
  4. timeout was defined according to the guidelines of this document:- http://blogs.msdn.com/b/ntdebugging/archive/2011/05/06/understanding-storage-timeouts-and-event-129-errors.aspx

  Comment:-26 fev 12:00 Am, I put to tape library firmware update and then we got
  This 129 February 26 event id error 03:00.

  Need help? :)

  Hi SabarnaDeb,

  Thanks for posting your query in the Microsoft Community Forums.

  As the question is limited to Rack in Windows 2008 server, it is better suited for the IT Pro TechNet public. Please ask your question in the Forum on TechNet Support.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• Blu - ray error: "device error" Code: "3", note: "AS-StorageError =-97060.

  I just lost 2 Blu - Ray discs, try to burn a project. I tried to burn a very simple project: a chapter two Blu - Ray with two episodes of 55 minutes of a TV on this topic show.  Recently I used the exact same computer to do exactly the same work successfully, so I don't know what the problem is.
  There are no menus in the project: it's just a rudimentary auto play disc with stereo sound.  Layer the watch 24.37 GB used on a single BD disc.

  The files are consistent and that construction starts, the following error appears:

  Blu - ray error: "device error" Code: "3", note: "AS-StorageError =-97060.

  System information:

  Windows 7 Professional

  Service Pack 1
  Intel i7 8 cores @ 2.80 GHz

  12 GB 1600 RAM

  AMD Radeon HD5870
  File HD 7200 RPM WD 3 TB NTSC system

  Pioneer BD - RW BDR-206 ATA burnerncore

  Adobe still CS6

  I do not see another example of this type of error the "97060" in it.

  I never have confidence I think remember me this, but note that the GB 24.37 may actually be 24.37 GiB, which may be too big to fit on a single layer Bluray. You should get another error, but who knows.

  I would try the building to a folder to see if this succeeds. Then you can return to the question of the combustion. Many of us prefer ImgBurn to burn and not yet.

• "ORA-19554: device allocation error, device type: SBT_TAPE device name:

  Hello expert.
  why I can't delete obsolete?
  I have this error:
  "ORA-19554: device allocation error, device type: SBT_TAPE device name:
  but I did not all bands. How can I remove this from my config of rman?
  Thank you very much, as usual.
  see you soon,
  Lain
  
  

  RMAN> show all;
  
  RMAN configuration parameters are:
  CONFIGURE RETENTION POLICY TO REDUNDANCY 2;
  CONFIGURE BACKUP OPTIMIZATION OFF; # default
  CONFIGURE DEFAULT DEVICE TYPE TO DISK;
  CONFIGURE CONTROLFILE AUTOBACKUP ON;
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/oraclesvi/TMP/backup_db_archive/cf_%F';
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE SBT_TAPE TO '%F'; # default
  CONFIGURE DEVICE TYPE 'SBT_TAPE' BACKUP TYPE TO COMPRESSED BACKUPSET PARALLELISM 1;
  CONFIGURE DEVICE TYPE DISK BACKUP TYPE TO COMPRESSED BACKUPSET PARALLELISM 1;
  CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
  CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
  CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
  CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
  CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT   '/oraclesvi/TMP/backup_db_archive/ora_df%t_s%s_s%p';
  CONFIGURE MAXSETSIZE TO UNLIMITED; # default
  CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
  CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
  CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
  CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/opt/oracle/product/10.2.0/SvilTMP/dbs/snapcf_DBTMP.f'; # default
  
  
  RMAN> report obsolete;
  
  RMAN retention policy will be applied to the command
  RMAN retention policy is set to redundancy 2
  Report of obsolete backups and copies
  Type                 Key    Completion Time    Filename/Handle
  -------------------- ------ ------------------ --------------------
  Archive Log          1      28-MAY-10          /oraclesvi/TMP/flash_recovery_area/DBTMP/archivelog/2010_05_28/o1_mf_1_22_60086j50_.arc
  Archive Log          2      29-MAY-10          /oraclesvi/TMP/flash_recovery_area/DBTMP/archivelog/2010_05_29/o1_mf_1_23_6014bh9j_.arc
  Archive Log          3      30-MAY-10          /oraclesvi/TMP/flash_recovery_area/DBTMP/archivelog/2010_05_30/o1_mf_1_24_603o6gls_.arc
  
  RMAN> delete obsolete;
  
  RMAN retention policy will be applied to the command
  RMAN retention policy is set to redundancy 2
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of delete command at 06/14/2010 14:43:17
  ORA-19554: error allocating device, device type: SBT_TAPE, device name: 
  ORA-27211: Failed to load Media Management Library
  Additional information: 2

  Try

  CONFIGURE DEVICE TYPE 'SBT_TAPE' clear;

  Werner

• Delete Obsolete gives error device allocation

  Hi experts RMAN,
  
  It comes to 10.2.0.4
  
  I use RMAN to make backups scheduled the disk. Never on the Strip.
  
  Today, when I ran RMAN > remove obsolete; I got 2 errors:
  
  ORA-19554: error device allocation, type of device: SBT_TAPE device name:
  ORA-27211: unable to load the media management library
  
  I don't know what I can do to work around this error. Do I need to set the default device the disk type?
  
  Thank you
  
  John

  Hello

  CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' MAXPIECESIZE 35 G;
  is the source of the problems.

  Run:
  CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' CLEAR;

  And check if all entries in sbt_tape disappeared in the output of
  If so try to backup again.

  Kind regards

  Tycho

• Portege R600: SIM inserted but error: "device not found".

  Hello

  Portege R600 under XP.
  Put a SIM card in the slot, but I get the error above: Wireless Manager Toshiba "device not found".

  Cannot find the configuration options or anything like that in the manual.
  Can someone point me in the direction of literature?

  Thank you very much!

  Evan

  Hello

  Here you can download the latest version of 3G driver and tool:
  http://APS2.toshiba-tro.de/WLAN/?page=3gdownloads

  Here you will find a knowledge base on the topic of G 3:
  http://APS2.toshiba-tro.de/WLAN/?page=3ghowto

  and here you can find a HowTo create + how to create a Dial-Up connection with 3 +.
  http://APS2.toshiba-tro.de/KB0/HTD9802OF0000R01.htm

  Hope this helps

• Error device basic system for my Satellite Pro A300

  Laptop = Satellite Pro A300
  Platform = Visa PS2

  In my device manager, I have two errors.

  Under "Other devices", mean "Base system device".
  Under the heading hardware ID, one says:

  PCI VEN_1180 & DEV_0592 & SUBSYS_FF1C1179 & REV_12
  PCI VEN_1180 & DEV_0592 & SUBSYS_FF1C1179
  PCI VEN_1180 & DEV_0592 & CC_088000
  PCI VEN_1180 & DEV_0592 & CC_0880

  The second says:
  PCI VEN_1180 & DEV_0843 & SUBSYS_FF1C1179 & REV_12
  PCI VEN_1180 & DEV_0843 & SUBSYS_FF1C1179
  PCI VEN_1180 & DEV_0843 & CC_088000
  PCI VEN_1180 & DEV_0843 & CC_0880

  I believe it has something to do with my card reader.
  Can someone direct me to the right web site, use the drivers?

  Here's a nice page:
  http://www.PCIDatabase.com/

  You can find the details of PCI devices.
  FRI means seller
  DEV: device

  FRI 1180 = Ricoh
  DEV 0592 = Ricoh Memory Stick Controller

  So the case is clear: he controller s card reader.

  I recommend reinstalling the driver.

• Get "unexpected error" device cannot be verified

  I went to the devices tab and this computer is here - I checked the serial number. Download from the app store gives "error unexpected device cannot be verified.

  I have the same problem with my IMac 27 "2015.  I think that this may be linked to an Adobe Creative cloud update that deleted files level root.  I'm under El Capitan.

• HP Envy M4 1115dx: Qualcomm QCA Atheros Driver Installation error | Device not found wireless adapter

  I just replaced my old HD with a new SSHD Seagate. Everything is going well until I tried to connect to internet in wifi wireless mode with. I think it was a pilot error because I just do a blank Windows 8 install on my new SSHD (hybrid drive SSD). So I went to find the Driver for the WLAN Module.

  HP is automatically detected my laptop model number and gave me a list of drivers. I selected "Qualcomm Atheros QCA90000 series Wireless LAN Driver for Microsoft Windows" under the list of Driver Network in the menu dropdown.

  In the middle of the installation of this driver, I was arrested and met a titled error message, "802.11a/b/g/n Wireless adapter device not found". Just below this title was a big red circle with a white X sign. Besides, he said: "the device may not be present or could have been ejected unplugged from the system. Abortieng the installation, please insert the card and try again the Setup program. »

  Below is a screenshot of what I mean.

  

  Problem solved. I uninstalled all the drivers but the Ralink. Think I know what may have caused this.
  
  The recommended for WLAN driver was based on a misinterpretation on behalf of HP. HP auto detected my laptop as a 1150la instead of the 1115dx model.
  
  I'm not sure why HP thinks that my model is another, but it may have something to do with the SSHD and thermal fan replacement I did before this error WiFi.

• error "device could not be calibrated" to PXI-5105

  Hello

  I want to calibrate my PXI-5105. But I get an error in MAX and a calibration vi. I tried to install NO-SCOPE 4.1.3 on PXI, but that does not solve the problem. I have labview time real 13.0.1 installed. I enclose the error messages.

  See you soon,.

  Syed

  Syed,

  So there is not a lot of good information on this error.  Automatic calibration works by connecting a known signal that is embedded in the digitizer at the ADC and to adapt the constants and phase shift.  The 234107 error means that there is a problem with this calibration signal or the signal to the ADC path, etc.  This known signal is calibrated during the external calibration and since your device is off external calibration (calibration necessary since February 2011), the problem is probably the calibration signal drifted too far from its known value.

  To resolve this problem, you will need to send the jury in external calibration, and I would recommend National instruments, send it because if there is a problem with the hardware with the Commission, we might be able to solve this problem, as well as of him have calibrated.

  I hope this helps.

  -Nathan

• Attempt to start in the recovery environment gives 0xc000000e error - "device is not accessible.

  HP Pavilion g4-1117dx laptop computer 4 GB, Win 7 Home Premium SP1 64-bit running

  Tried to boot into the recovery environment through the HP Recovery Manager (v 2.0.9.0 Rebecca.exe 3/25/12)

  However, I get to the Windows Boot Manager screen that says error 0xc000000e - device is not accessible

  I scanned the partition HP_TOOLS for errors, including an analysis of the sector, but it does detect any errors.

  FYI - I have repair disks that I created.  Is it possible to repair or recover only the partition HP_TOOLS?

  Just to be clear, the problem is with my Recovery partion only.  Win 7 in main boot works fine.

  Suggestions to fix or repair, please?

  Don't know what else to suggest other than using recovery discs to reinstall. If you have recovery disks, the recovery partition is not really necessary, more a convenience than using disks, that's all.

• HP 630: error device Device manager see the two

  Sir Help My Device Manager Find Me this driver display yellow error on two devices. I had to download driver hp site but not installed driver. "Open popup" does not meet Minimum system requirements.

  Hello

  Please try:

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55085.exe

  and

  FTP://ftp.HP.com/pub/SoftPaq/sp58001-58500/sp58429.exe

  Otherwise please use following instructions to get hardware id missing then return:

  http://www.WikiHow.com/find-hardware-ID

  Kind regards.