HP s 4540: error device Base system in 10 windows Device Manager

Similar Questions

• Laptop HP ProBook s 4540: lack of Base system device drivers

  Hello

  Currently, I have a laptop HP ProBook 4540 s notebook PC (Energy Star) and found that my Base system device driversare missing. I have tried very hard to find, but in vain. Honestly, I don't even know not what they are or what they do, but I'm sure that I need them. Please help me if possible.

  PS This is my first question and sorry if the format is confused or lack of useful information. If there is a better way to format this issue please inform me and I wil try to do better next time.

   

  Hello

  Try:

  JMicron card reader Driver

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63637.exe

  If it fails, set the hardware ID.

  

• After restarting windows and then no error in config/system is finally windows starts successfully with no problems quo. __

  "windows couldnot start because the following file is missing" c:/windows/system32/config/system.
  This message appears at the first start, but when I press ctrl + Alt + Delete, restart windows and then no error in config/system does finally come windows starts successfully without problem usually. I searched on the internet that all solutions are given if windows XP does not start. But in my case after restart only a single window loads successfully. I'm dubious before using the recovery console.
  Please help everyone,
  no case I found the solution to this particular problem.

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes pulling and buttons power).

  These can cause corruption in the file system that must be fixed before you do anything else. If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  
  Never, never, never start with the support engineer technical 'expert' who are hired by Microsoft to implement the KB307545.  You are likely to be in for a frustrating waste of time and might just make things worse.

  Always, always, always start with a chkdsk with first error correction.

  There is zero logic to start try to copy files to a hard drive with a corrupted file system so corruption of file system must be fixed first using the XP chkdsk program and run chkdsk can solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Start the Recovery Console Windows using an XP bootable installation CD, or create a bootable CD from the Console of the Recovery XP (no XP media required).

  A CD of XP Recovery Console is not the same as the recovery disks that may have come to a store to purchase the system.

  If you have any bootable CD to run the XP Recovery Console or that you are not sure what type of bootable CD you have, can create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

  If you need instructions to create a bootable XP Recovery CD of Console, we can predict that too (just ask).

  After booting into the Recovery Console, you should be in this folder:

  C:\WINDOWS

  For each of your hard disk partitions, you must then run:

  Chkdsk /r

  For example, at the Recovery Console prompt, enter:

  CHKDSK c: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time to complete or seem to be 'glued '.  Be patient.  If the HARD drive light flashes, it's something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  The chkdsk/r must be completed without error, you may need to run several times until it does.

  Remove the CD, and then type "exit" to exit the Recovery Console and restart the computer and the report with your progress.

• Carbon X 1 base system device error

  I got this error for base system device in my device manager. I installed X 1 Ricoh multicard reader, but even when he can't solve.

  My machine is X 1-3444-BDU, Win 7 pro 64-bit. Could someone help me?

  Thank you!

  Hello

  Welcome to the Community Forums of Lenovo!

  Try ongoing update of the Vantage system think that will automatically detect and install missing drivers for your

  device.

  Best regards

  Mithun.

• Not found base system device driver

  Recently, at startup, I get an error message 'Base system device driver' not found. Windows cannot find the driver appropriate to solve the problem. I use a laptop Presario F756NR with Windows Vista (32-bit) OS.

  I checked the 'properties' of device and find the bus 2 PCI, device 5, function 2.

  Under status: this device is not configured correctly. (Code 1)

  There is no driver selected for the item or a set of device information.

  To reinstall the drivers for this device, click on reinstall.

  Click on reinstall just made sure another Windows search found nothing.

  I tried to download sp38689.exe with NO result.

  Help please!

  Hi, Bob:

  It's all part of this card reader controller stuff.

  I suggest that you do a right click on any card reader devices and select uninstall.

  If there is a check box to uninstall the driver, these boxes too.

  Restart the PC and if the drivers do not correctly install, download and reinstall the card reader driver.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-58981-1&CC=US&DLC=en&LC=en&os=2093&Product=3646836&sw_lang=

  Paul

• Code 28 base system device

  I just installed an ASMedia XHCI USB 3.0 on my Z800 work card (Pro Windows, 64) and while Device Manager indicates that the new USB controllers and pilots work, I now have an error symbol in the other devices section (in Device Manager) showing a non-working "Device Base System."

  Windows 7 troubleshooting tool cannot identify the device or driver.  The hardware IDS are

  PCI/VEN_10B5 & DEV_8609 & SUBSYS_860910B5 & REV_BA

  PCI/VEN_10B5 & DEV_8609 & SUBSYS_860910B5

  PCI/VEN_10B5 & DEV_8609 & CC_088000

  PCI/VEN_10B5 & DEV_8609 & CC_0880

  Perhaps the ghosts of my removing a firewire card? And if so, how can I solve the problem?  All devices that I recognize and use (graph, network card, etc.) seem to be present and working.

  Thank you!

  Hi, just thought that you do not want to hear what that support people at the top says about the error message: basically, they told to ignore it, as long as the USB card worked!  I replied that if this error message (that many people take seriously) is a problem experienced, perhaps it should be noted as such in the ReadMe file, or maybe they could do just their installer so that you do not have a message "your new hardware have not installed properly!

  In any case, thanks for all the time you put into this wild goose hunting!

• Device unknown Base system-> card reader, ThinkPad T430 2349 Win7

  Hi all

  I got a new ThinkPad T430 2349 and installed Windows 7. After installing the drivers, everything works fine, except the card reader. It it is not found, on the contrary, there is a device unknown base system listed in the hardware Manager. The hardware of this base system device id is:

  PCI VEN_1180 & DEV_E822 & SUBSYS_21F317AA & REV_07

  This should indeed be the card reader.

  Should which driver I?

  I have already installed without success:

  http://support.Lenovo.com/de_DE/downloads/detail.page?docid=DS028931

  http://support.Lenovo.com/de_DE/downloads/detail.page?docid=DS029035

  Thanks for any help!

  Andreas

  OK, I had a driver that works in Windows 7, also:

  www.magnetix.rs/activa/E822_X64.zip

• HP ProBook 4540 s missing device unknown and base system device

  Hello

  HP probook 4540 s [Nr Windows 7 (64-bit) ultimate H5J79EA #ABV]...

  

  1 base system device

  PCI\VEN_197B & DEV_2392 & SUBSYS_17F6103C & REV_30

  PCI\VEN_197B & DEV_2392 & SUBSYS_17F6103C

  PCI\VEN_197B & DEV_2392 & CC_088000

  PCI\VEN_197B & DEV_2392 & CC_0880

  Base-2 system device

  PCI\VEN_197B & DEV_2393 & SUBSYS_17F6103C & REV_30

  PCI\VEN_197B & DEV_2393 & SUBSYS_17F6103C

  PCI\VEN_197B & DEV_2393 & CC_088000

  PCI\VEN_197B & DEV_2393 & CC_0880

  3 - Bluetooth controller

  PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00

  PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C

  PCI\VEN_1814 & DEV_3298 & CC_0D1100

  PCI\VEN_1814 & DEV_3298 & CC_0D11

  4 Ethernet Controller

  PCI\VEN_10EC & DEV_8168 & SUBSYS_17F6103C & REV_07

  PCI\VEN_10EC & DEV_8168 & SUBSYS_17F6103C

  PCI\VEN_10EC & DEV_8168 & CC_020000

  PCI\VEN_10EC & DEV_8168 & CC_0200

  5 - unknown device

  ACPI\HPQ6000

  * HPQ6000

  Ethernet:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229457&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123192_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Bluetooth:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229457&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_113004_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• The proBook 6460 b Base system device error message

  I am running Windows Vista 32-bit Enterprise on a ProBook 6460 b.  In Device Manager, I get an error code 28 on the Base system device.  Under the "Détails" and "Hardware ID", there is this value.

  PCI-VEN_197B & DEV_2392 & SUBSYS_161C103C & REV-30

  PCI-VEN_197B & DEV_2392 & SUBSYS_161C103C

  PCI-VEN_197B & DEV_2392 & CC_088000

  PCI-VEN_197B & DEV_2392 & CC_0880

  If there is someone who can help, I'd be happy.  Thank you.

  Hello

  Download and install the driver of player card on the link below.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5045594&prodNameId=5045596&swEnvOID=2097&swLang=13&mode=2&taskId=135&swItem=ob-93389-1

  Kind regards

  DP - K

• HP probook 4540 s missing 2 x base system device

  Hi... I install windows on my new 4540 s HP's Probook. I have install all the drivers but two base system device, I can't find.

  The hardware ID:

  1 base system device

  PCI\VEN_197B & DEV_2392 & SUBSYS_167C103C & REV_30

  PCI\VEN_197B & DEV_2392 & SUBSYS_167C103C

  PCI\VEN_197B & DEV_2392 & CC_088000

  PCI\VEN_197B & DEV_2392 & CC_0880

  base-2 system device

  PCI\VEN_197B & DEV_2393 & SUBSYS_167C103C & REV_30

  PCI\VEN_197B & DEV_2393 & SUBSYS_167C103C

  PCI\VEN_197B & DEV_2393 & CC_088000

  PCI\VEN_197B & DEV_2393 & CC_0880

  Please post here link to download the driver. Thank you

  Hello

  Download and install the driver from this link JMicron card reader.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4132&swLang=13&mode=2&taskId=135&swItem=ob-111155-1

  Kind regards

  DP - K

• Base system device driver error

  I recently installed windows 7 on my Lenovo ThinkPad SL500, now I have problems and it says there is a problem with my base system device drivers and drivers for unknown devices, I have 4 errors, tried to contact the support client lenovo but no answer can someone please help me. Or if anyone knows a good program to remove errors and solve all the problems on my computer... Please help me I am at my wits end with this.  Thank you.

  You have visited this website to get the drivers?

  http://www-307.IBM.com/PC/support/site.WSS/MIGR-70413.html

• Device base system driver code (28)... I use a sony vgn z555dn laptop after I've upgraded to windows 7 this is the error that I can't fix all the others, I managed to solve... Please help

  Remember - this is a public forum so never post private information such as numbers of mail or telephone

  Device base system driver code (28)... I use a sony vgn z555dn laptop after I've upgraded to windows 7 this is the error that I can't fix all the others, I managed to solve... Please help

  Hello

  You updated the BIOS and motherboard (chipset drivers)? All device drivers? By checking
  manually on the link above?

  If so you need to contact the Sony Support as the error is in the provided OEM drivers and not
  Windows 7.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• 4050 proBook s: 10 4540 windows upgrade s base system device

  I did an upgrade of windows 10 and got two bangs of pilot.

  base system device

  SD/mmc host controller

  MS host controller

  help please

  Hello:

  You need this driver...

  FTP://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63637.exe

• Device base system - lack error driver for EliteBook 8540p Windows Pro 8.1

  I'm looking for Base system device drivers.

  Hardware ID

  PCI VEN_1180 & DEV_0592 & SUBSYS_1521103C & REV_14

  PCI VEN_1180 & DEV_0592 & SUBSYS_1521103C

  PCI VEN_1180 & DEV_0592 & CC_088000

  PCI VEN_1180 & DEV_0592 & CC_0880

  I tried my best to solve this problem, but unsuccesssful. Can someone help me?

  Hello:

  Use the Windows 7 driver...

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=4096169&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_79317_2%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Speakers do not work error: device not installed Base and the data Interface system / no driver found

  I have a Dell Inspiron 1420 and recently upgraded to Windows 7. It had Windows Vista before. Now my speakers do not play, and they did it when I am running Vista. I did some troubleshooting and got messages from Interface to data and not installed for Base system device, but when I click on apply this patch, I get the message no driver found.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1