Error device (RFCOMM Protocol TDI) any attempt to access invalid memory facility

Similar Questions

• Access invalid memory location during export for iOS error

  I was recently asked to convert an application for us flash on the iPad. When I try to publish the .ipa file, I get the following error:

  Access invalid memory location 0xceip = 0x55492db4

  I have no idea what could cause this and my google search of the error message came pretty empty. If I delete the document class and republish it works fine so I know it has something to do with my code but I don't have a clue where to start looking so I was hoping that someone else had a similar error and could point me in the right direction.

  Thank you very much

  -Ryan

  I was able to understand it through check and guess laborious. Just thought I'd share the bug in case someone else ever runs into it.

  A library third party I was using says try bad catch statements:

  try {}

  catch (Error :*){

  }

  No idea why the original author did it, probably never intended to write "error: *" and release shift fast enough after the "(" mais comme vous pourriez le soupçonne "Erreur" est un nom d'objet réservé à ne peut être déclaré en tant que paramètre variable) "

  When replaced by:

  try {}

  catch (error: Error) {}

  }

  the memory access bug went away. What is strange, is that the incorrect try/catch statement works fine when published in format swf, air or android and is only a problem with the converter of iOS and of course produced a very cryptic error.

  I used CS5.5 so maybe that this problem has been corrected (if not, I would say making it a compile error), but just thought I would post my findings.

• Receiving data using the device RFCOMM Protocol activate bluetooth

  Hi all

  I want to apply that receive the data of bluetooth device using the RFCOMM Protocol.

  I'm pasting some of my code

  Server StreamConnectionNotifier = null, Server1 = null, server2 = null;

  Hi all

  Can some body having any idea or sample code to receive data using the for Bluetooth RFCOMM Protocol. I am able to find a device to activate bluetooth and also connect with it.

  And ther eis a problem plus I only magnified device does not form some sort of link (link Url SPP, OPP Url link, etc.) for bluetooth.

  But I can verify that this device is correct because I am able to receive data from this device to my computer by checking the connection port and to open this port.

• File system error (1003) on any attempt to access files

  First of all - I have blackberry.io.file in the config.xml file.

  Anytime, I try to read the file, extract of its existence or save it - I get the same exact message each time.

  File system error (1003).

  Handheld is a Torch 9800

  AT & T

  6.0.0.246.

  Funny, that's exactly the same code works fine on a 5 9700 version handset.

  Any ideas would be appreciated.

  TIA

  It work?

  var fileLocation   = "file:///store/home/user/documents/MCMClient.dat";
  

  or do this?

  var fileLocation   = "file:///SDCard/MCMClient.dat";
  

  I was under the impression that only the file:///SDCard and the file:///store/home/user/... are writable.  Maybe wrong however.

• Any attempt to access Microsoft Update leads to "Internet Explorer Cannot Display the Webpage"

  No error message appears. "Analyze the network connection" does not work.
  I have XP with SP3, IE7, automatic updates on, no firewall other than Windows, all other work on Web sites, including updates for antivirus (Avira Antivirus personal), I've deleted browsing history and disabled the unrecognized programs modules. I have tried to run a UpdateFix.bat one of these positions without result. Help!

  15 + months your computer of late on the Windows updates. Do not waste time trying to solve it: the computer must not be connected to the internet or networks in its current state.

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  CF. http://michaelstevenstech.com/cleanxpinstall.html#steps

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
       http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  Good luck! You should be able to accomplish all of this in a few hours or more.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Any attempt to access of inaccessible property via a reference RADIUS static type ball.

  Hai guys...
  I don't know why my code can not run...
  This is the problem that I have to face...

  package

  {

  import flash.display.Sprite;

  import flash.events.Event;

  public class bubble extends Sprite

  {

  private var balls: Array;

  private var numBalls:Number = 30;

  private var bounce: Number = - 0.5;

  private var spring: Number = 0.05;

  private var gravity: Number = 0.1;

  public void Bubbles()

  {

  init();

  }

  private function init (): void

  {

  bullets = new Array();

  for (var i: uint = 0; i < numBalls; i ++)

  {

  var ball: Ball = new Ball (Math.random () * 30 + 20,

  Math.Random () * 0xffffff);

  ball.x = Math.Random () * stage.stageWidth;

  ball.y = Math.Random () * stage.stageHeight;

  ball. VX = Math.Random () * 6 - 3;

  ball. Vy = Math.Random () * 6 - 3;

  addChild (ball);

  Balls.push (ball);

  }

  addEventListener (Event.ENTER_FRAME, onEnterFrame);

  }

  private void onEnterFrame(event:Event):void

  {

  for (var i: uint = 0; i < numBalls - 1; i ++)

  {

  var ball0:Ball = balls [i];

  for (var j: uint = i + 1; j < numBalls; j ++)

  {

  var ball1:Ball = balls [j];

  var dx:Number = ball1.x - ball0.x;

  var dy:Number = ball1.y - ball0.y;

  var dist:Number = Math.sqrt (dx * dx + dy * dy);

  var minDist: Number = ball0.radius + ball1.radius;

  if(dist < minDist)

  {

  var angle: Number = Math.atan2 (dy, dx);

  var tx:Number = ball0.x + Math.cos (angle) *.

  minDist;

  var ty:Number = ball0.y +.

  Math.Sin (angle) *.

  minDist;

  var ax: Number = (tx - ball1.x) *.

  Spring;

  var ay: Number = (ty - ball1.y) *.

  Spring;

  ball0. VX = ax;

  ball0. Vy = ay;

  ball1. VX += ax;

  ball1. Vy += ay;

  }

  }

  }

  for (i = 0; i < numBalls; i ++)

  {

  var ball: Ball = ball [i];

  Move (ball);

  }

  }

  private void move(ball:Ball):void

  {

  ball. Vy += gravity;

  ball.x += ball.vx;

  ball.y += ball.vy;

  If (ball.x + ball.radius > stage.stageWidth)

  {

  ball.x = stage.stageWidth - ball.radius;

  ball. VX * = rebound;

  }

  ElseIf (ball.x - ball.radius < 0)

  {

  ball.x = ball.radius;

  ball. VX * = rebound;

  }

  If (ball.y + ball.radius > stage.stageHeight)

  {

  ball.y = stage.stageHeight - ball.radius;

  ball. Vy * = rebound;

  }

  Else if (ball.y - ball.radius < 0)

  {

  ball.y = ball.radius;

  ball. Vy * = rebound;

  }

  }

  }

  }

  The error said you that your ball class does not have a RADIUS property.  Chances are you need create such a property in this class.

• Signature errors and "...". attempt to access the API blocked"error

  We have a Smart Phone WebWorks very simple application that opens an external URL to start. The app works when it is deployed to a device using the JavaLoader to install cod from the directory StandardInstall, but it does not run when installed using a JAD file from the directory OTAInstall (using JavaLoader or downloaded with the browser).

  Error message displayed at startup is: "error starting d6x102xdc6ff029cb2aedf9ecc1cc45a5fb474d: Module 'd6x102xdc6ff029cb2aedf9ecc1cc45a5fb474d' trying to access a secure API."

  Inspect the event log shows two errors of apparent signature:

  time GUID:0x97C9F5F641D25E5F: 15:38 Friday, may 25, 2012 severity: 0 type: 2 appystem data: CMM: d6x102xdc6ff029cb2aedf9ecc1cc45a5fb474d (5376) No sig 0 x 545252

  ....

  time GUID:0x97C9F5F641D25E5F: Fri may 25 15:38:03 2012 severity: 0 type: 2 appystem data: CMM: d6x102xdc6ff029cb2aedf9ecc1cc45a5fb474d (5376) No sig 0 x 414252

  Other posts on this forum indicate that the error is due to missing signatures. We have installed three signatures using signature tool:

  customer-RBB - xxxxxxxxxx.csi

  customer-CPR - xxxxxxxxxx.csi

  customer-RRT - xxxxxxxxxx.csi

  The installation is confirmed by running the signature on each of these files, tool that displays the message: "Signature tool has already been registered with this signatory. If you try to record with the same signature twice, you will overwrite the previous record":"

  The application is built using bbwp then signed with signature tool with the recursion on the output directory, for example:

  C:\Program Files\Java\jdk1.6.0_26\jre\bin\java.exe -jar c:\Program Files\Research In Motion\BlackBerry WebWorks SDK 2.3.1.5\bin\SignatureTool.jar -a -c -C -p ... -r c:\temp\_546ade8eae214e950293e490c8eda702/output/d6x102xdc6ff029cb2aedf9ecc1cc45a5fb474d
  

  No errors are reported bbwp or signature tool. Running signature tool on each of the files in the Directory displays OTAInstall COD an empty window, by clicking on the query button displays a message: "no signature not required".

  Our web server is configured with the necessary mime types for COD and JAD files.

  All this seems to indicate that the necessary signatures are installed, the COD files are signed, but somehow the signatures are currently not recognized when the application is deployed on the handset.

  We use Java JDK 1.6 on Windows 7 (32 bit). The device that we test this on is a BlackBerry Curve 8520 with OS 5.0 Bundle 1096 (v5.0.0.592, platform 5.2.0.64).

  Here are copies of the file config.xml, index.html, event log.

  Config.XML:

  
  http://www.w3.org/ns/widgets ".
  "xmlns:RIM ="http://www.blackberry.com/ns/widgets"
  version = "2.0".
  RM:header = "" Widget-RIM: RIM/widget ">"

  http://www.d6technology.com' rim: copyright 'Copyright D6 technology' = > D6 technology

  The King Edward VII School

  The King Edward VII School

  <>ermissions >
  <>Ermit > access_sharedermit >
  ermissions >

  subdomains of http://d6communicator.com"="true"/ >

  Index.html:

  
  
  
  
  

  
  

  loading...

  
  
  

  Event log:

  time GUID:0x97C9F5F641D25E5F: 02:00 Thu Jan 01 1970 severity: 0 type: 2 appystem data: JVM:INFOp = 293e80a8, a = '5.0.0.592', '5.2.0.64' = o, h = 8c000f03
  time GUID:0x7D52B2987EC80054: Fri may 25 15:37:47 2012 severity: 0 type: 2 app: net .rim .fd data: FDOf
  time GUID:0x1A77581FBCC4EC23: Fri may 25 15:37:47 2012 severity: 0 type: 2 app: net .browser data .rim: WPTCP - S TCP - js, ss, bg, em, WiFi:bb,http://live.vodafone.com/
  time GUID:0x316C1626A9DDC375: Fri may 25 15:37:47 2012 severity: 0 type: 2 app: net .rim .tcp datapen
  time GUID:0x3B91E1630F0745BC: Fri may 25 15:37:47 2012 severity: 0 type: 2 app: net .rim .tunnel datapen - MagicRudyAPN.rim
  time GUID:0x3B91E1630F0745BC: Fri may 25 15:37:47 2012 severity: 0 type: 2 app: net .rim .tunnel dataTac - MagicRudyAPN.rim
  time GUID:0x1A77581FBCC4EC23: Fri may 25 15:37:48 2012 severity: 0 type: 2 app: net .rim .browser data: loading time: 1641
  time GUID:0x1A77581FBCC4EC23: Fri may 25 15:37:48 2012 severity: 0 type: 2 app: net .browser data .rim: Brtd 1742 828
  time GUID:0x3B91E1630F0745BC: Fri may 25 15:37:48 2012 severity: 0 type: 2 app: net .rim .tunnel data: closed - MagicRudyAPN.rim
  time GUID:0x316C1626A9DDC375: Fri may 25 15:37:48 2012 severity: 0 type: 2 app: net .rim .tcp data: closed
  time GUID:0x1A77581FBCC4EC23: Fri may 25 15:37:48 2012 severity: 0 type: 2 app: net .browser data .rim: WPTCP - S TCP - js, ss, bg, em, WiFi:bb,http://www.vodafone.com/
  time GUID:0x316C1626A9DDC375: Fri may 25 15:37:48 2012 severity: 0 type: 2 app: net .rim .tcp datapen
  time GUID:0x3B91E1630F0745BC: Fri may 25 15:37:48 2012 severity: 0 type: 2 app: net .rim .tunnel datapen - MagicRudyAPN.rim
  time GUID:0x3B91E1630F0745BC: Fri may 25 15:37:48 2012 severity: 0 type: 2 app: net .rim .tunnel dataTac - MagicRudyAPN.rim
  time GUID:0xB247BA8FCCE09BFE: Fri may 25 15:37:48 2012 severity: 0 type: 2 app: net .rim .udp datapen
  time GUID:0x109F36E312864507: Fri may 25 15:37:48 2012 severity: 0 type: 2 app: net .rim .dns datansQ 1
  time GUID:0x109F36E312864507: Fri may 25 15:37:49 2012 severity: 0 type: 2 app: net .rim .dns datansR 1
  time GUID:0x109F36E312864507: Fri may 25 15:37:49 2012 severity: 0 type: 2 app: net .rim .dns data: RetQ
  time GUID:0x3B91E1630F0745BC: Fri may 25 15:37:49 2012 severity: 0 type: 2 app: net .rim .tunnel data: closed - MagicRudyAPN.rim
  time GUID:0xB247BA8FCCE09BFE: Fri may 25 15:37:49 2012 severity: 0 type: 2 app: net .rim .udp data: closed
  time GUID:0x1A77581FBCC4EC23: Fri may 25 15:37:50 2012 severity: 0 type: 2 app: net .rim .browser data: loading time: 1570
  time GUID:0x1A77581FBCC4EC23: Fri may 25 15:37:50 2012 severity: 0 type: 2 app: net .browser data .rim: Brtd 1617 896
  time GUID:0x1A77581FBCC4EC23: Fri may 25 15:37:50 2012 severity: 0 type: 2 app: net .browser data .rim: WPTCP - S TCP - js, ss, bg, em, WiFi:bb,http://www.vodafone.com/ppc.html
  time GUID:0x1A77581FBCC4EC23: Fri may 25 15:37:51 2012 severity: 0 type: 2 app: net .rim .browser data: loading time: 648
  time GUID:0x1A77581FBCC4EC23: Fri may 25 15:37:51 2012 severity: 0 type: 2 app: net .browser data .rim: WPTCP - S TCP - js, ss, bg, em, WiFi:bb,http://192.168.1.144/cic/download/102//blackberry/OTAInstall/d6x102xdc6ff029cb2aedf9ecc1cc45a5fb474d...
  time GUID:0x316C1626A9DDC375: Fri may 25 15:37:51 2012 severity: 0 type: 2 app: net .rim .tcp datapen
  time GUID:0x3B91E1630F0745BC: Fri may 25 15:37:51 2012 severity: 0 type: 2 app: net .rim .tunnel datapen - MagicRudyAPN.rim
  time GUID:0x3B91E1630F0745BC: Fri may 25 15:37:51 2012 severity: 0 type: 2 app: net .rim .tunnel dataTac - MagicRudyAPN.rim
  time GUID:0x1A77581FBCC4EC23: Fri may 25 15:37:51 2012 severity: 0 type: 2 app: net .rim .browser data: loading time: 445
  time GUID:0x1A77581FBCC4EC23: Fri may 25 15:37:51 2012 severity: 0 type: 2 app: net .browser data .rim: AfDB
  time GUID:0x1A77581FBCC4EC23: Fri may 25 15:37:51 2012 severity: 0 type: 2 app: net .browser data .rim: Brtd 508 381
  time GUID:0x1A77581FBCC4EC23: Fri may 25 15:37:53 2012 severity: 0 type: 2 app: net .browser data .rim: Brtd 69635 3234
  time GUID:0x3B91E1630F0745BC: Fri may 25 15:37:53 2012 severity: 0 type: 2 app: net .rim .tunnel data: closed - MagicRudyAPN.rim
  time GUID:0x316C1626A9DDC375: Fri may 25 15:37:53 2012 severity: 0 type: 2 app: net .rim .tcp data: closed
  time GUID:0x97C9F5F641D25E5F: Fri may 25 15:37:55 2012 severity: 0 type: 2 appystem data: CMM: Add d6x102xdc6ff029cb2aedf9ecc1cc45a5fb474d (5376)
  time GUID:0x97C9F5F641D25E5F: Fri may 25 15:37:55 2012 severity: 0 type: 2 appystem data: CMM: Add d6x102xdc6ff029cb2aedf9ecc1cc45a5fb474d-1 (5384)
  time GUID:0x97C9F5F641D25E5F: Fri may 25 15:37:55 2012 severity: 0 type: 2 appystem data: CMM: Add d6x102xdc6ff029cb2aedf9ecc1cc45a5fb474d-2 (5412)
  time GUID:0x97C9F5F641D25E5F: Fri may 25 15:37:55 2012 severity: 0 type: 2 appystem data: CMM: Add d6x102xdc6ff029cb2aedf9ecc1cc45a5fb474d-3 (5416)
  time GUID:0x97C9F5F641D25E5F: Fri may 25 15:37:55 2012 severity: 0 type: 2 appystem data: CMM: Add d6x102xdc6ff029cb2aedf9ecc1cc45a5fb474d-4 (5477)
  time GUID:0x97C9F5F641D25E5F: Fri may 25 15:37:56 2012 severity: 0 type: 2 appystem data: VM: + RR! net_rim_bb_browser_daemon RX = 21.8 M, RF = 26.8 M, FF = 152.9 M, OF = 489 K, OS 9.4 M =, = 126.9 K, OR = 0, EN = 1 K, TR = 3.7 K, RR = 0, IS = 19 K RA = 12.4 M, RS = 9.4 M, RN = 66.9 K TA = 1. 5 m, TS = 0, TN is 17.5 K PA = 0, PS = 0, PN = 7 K R0 is 55.2 M 1 = 800.2 K, 2 = 20 K, 3 = 86.6 K, 4 = 1 M, 7 = 277.9 K, 8 = 6 K, 9 is 10.3, 10 = 16.4 K, 11 = 51.5 K, 12 K, 13 270,2 is is 19.1 K, 15 = 371 K, 20 = 3.9 K, 21 = 524, 22 is 62.8 K, 23-is 72.2 K 24 is 16.5 K
  time GUID:0x97C9F5F641D25E5F: Fri may 25 15:37:56 2012 severity: 0 type: 2 appystem data: VM:-RRnet_rim_bb_browser_daemon RX = 21.8 M, RF = 27.2 M, FF = 152.6 M, OF 489 K, OS = 9 M =, = 126.9 K OR = 0, EN = 1 K, TR = 3.7 K, RR = 0, IS = 19 K RA = 12 M, RS = 9 M, RN = 65.3 K TA = 1. 8 m, TS = 0, TN is 19.1 K PA = 0, PS = 0, PN = 7 K R0 = 55.2 M, 1 is 800.2 K, 2 = 20 K, 3 = 86.6 K, 4 = 1 M, 7 = 277.9 K, 8 = 6 K, 9 = 10 M, 10 = 16.4 K, 11 is 51.5 K, 12 K, 13 270,2 is is 19.1 K, 15 = 371 K, 20 = 3.9 K, 21 = 524, 22 is 62.8 K, 23-is 72.2 K 24 is 16.5 K
  time GUID:0x97C9F5F641D25E5F: Fri may 25 15:37:56 2012 severity: 0 type: 2 appystem data: CMM: d6x102xdc6ff029cb2aedf9ecc1cc45a5fb474d (5376) No sig 0 x 33
  time GUID:0x97C9F5F641D25E5F: 15:38 Friday, may 25, 2012 severity: 0 type: 2 appystem data: VM:LINK d6x102xdc6ff029cb2aedf9ecc1cc45a5fb474d
  time GUID:0x97C9F5F641D25E5F: 15:38 Friday, may 25, 2012 severity: 0 type: 2 appystem data: CMM: d6x102xdc6ff029cb2aedf9ecc1cc45a5fb474d (5376) No sig 0 x 545252
  time GUID:0x97C9F5F641D25E5F: 15:38 Friday, may 25, 2012 severity: 0 type: 2 appystem: 5376 data module cannot refer to net.rim.device.api.system.RuntimeStore
  time GUID:0x97C9F5F641D25E5F: 15:38 Friday, may 25, 2012 severity: 0 type: 2 appystem data: Module "d6x102xdc6ff029cb2aedf9ecc1cc45a5fb474d" trying to access a secure API.
  time GUID:0x97C9F5F641D25E5F: 15:38 Friday, may 25, 2012 severity: 0 type: 2 appdata error: Linker ystem: "VerifyError" for d6x102xdc6ff029cb2aedf9ecc1cc45a5fb474d
  time GUID:0x97C9F5F641D25E5F: Fri may 25 15:38:02 2012 severity: 0 type: 2 appystem data: CMM: d6x102xdc6ff029cb2aedf9ecc1cc45a5fb474d (5376) No sig 0 x 33
  time GUID:0xED7944AEBD0C4AE2: Fri may 25 15:38:02 2012 severity: 2 type: 2 App: application of data-control: IvHS
  time GUID:0x1A77581FBCC4EC23: Fri may 25 15:38:02 2012 severity: 0 type: 2 app: net .browser data .rim: JAD 900
  time GUID:0x97C9F5F641D25E5F: Fri may 25 15:38:03 2012 severity: 0 type: 2 appystem data: CMM: d6x102xdc6ff029cb2aedf9ecc1cc45a5fb474d (5376) No sig 0 x 414252
  time GUID:0x1A77581FBCC4EC23: Fri may 25 15:38:03 2012 severity: 0 type: 2 app: net .browser data .rim: WPTCP - S TCP - js, ss, bg, em, WiFi:bb,http://live.vodafone.com/
  time GUID:0x316C1626A9DDC375: Fri may 25 15:38:04 2012 severity: 0 type: 2 app: net .rim .tcp datapen
  time GUID:0x3B91E1630F0745BC: Fri may 25 15:38:04 2012 severity: 0 type: 2 app: net .rim .tunnel datapen - MagicRudyAPN.rim
  time GUID:0x3B91E1630F0745BC: Fri may 25 15:38:04 2012 severity: 0 type: 2 app: net .rim .tunnel dataTac - MagicRudyAPN.rim
  time GUID:0x1A77581FBCC4EC23: Fri may 25 15:38:06 2012 severity: 0 type: 2 app: net .rim .browser data: loading time: 2836
  time GUID:0x1A77581FBCC4EC23: Fri may 25 15:38:06 2012 severity: 0 type: 2 app: net .browser data .rim: Brtd 2875 828
  time GUID:0x3B91E1630F0745BC: Fri may 25 15:38:06 2012 severity: 0 type: 2 app: net .rim .tunnel data: closed - MagicRudyAPN.rim
  time GUID:0x316C1626A9DDC375: Fri may 25 15:38:06 2012 severity: 0 type: 2 app: net .rim .tcp data: closed
  time GUID:0x1A77581FBCC4EC23: Fri may 25 15:38:06 2012 severity: 0 type: 2 app: net .browser data .rim: WPTCP - S TCP - js, ss, bg, em, WiFi:bb,http://www.vodafone.com/
  time GUID:0x316C1626A9DDC375: Fri may 25 15:38:06 2012 severity: 0 type: 2 app: net .rim .tcp datapen
  time GUID:0x3B91E1630F0745BC: Fri may 25 15:38:06 2012 severity: 0 type: 2 app: net .rim .tunnel datapen - MagicRudyAPN.rim
  time GUID:0x3B91E1630F0745BC: Fri may 25 15:38:06 2012 severity: 0 type: 2 app: net .rim .tunnel dataTac - MagicRudyAPN.rim
  time GUID:0x7D52B2987EC80054: Fri may 25 15:38:07 2012 severity: 0 type: 2 app: net .rim .fd data: FDOn 0
  time GUID:0x3B91E1630F0745BC: Fri may 25 15:38:07 2012 severity: 0 type: 2 app: net .rim .tunnel data: closed - MagicRudyAPN.rim
  time GUID:0x316C1626A9DDC375: Fri may 25 15:38:07 2012 severity: 0 type: 2 app: net .rim .tcp data: closed
  time GUID:0x1A77581FBCC4EC23: Fri may 25 15:38:07 2012 severity: 0 type: 2 app: net .rim .browser data: loading time: 453
  time GUID:0xDCC3165DB06A81D6: Fri may 25 15:38:07 2012 severity: 0 type: 2 app: net .rim .wlan .cm data: CMIC
  time GUID:0x1A77581FBCC4EC23: Fri may 25 15:38:08 2012 severity: 0 type: 2 app: net .browser data .rim: Brtd 1399 898
  time GUID:0x3B91E1630F0745BC: Fri may 25 15:38:08 2012 severity: 0 type: 2 app: net .rim .tunnel data: closed - MagicRudyAPN.rim
  time GUID:0x316C1626A9DDC375: Fri may 25 15:38:08 2012 severity: 0 type: 2 app: net .rim .tcp data: closed
  time GUID:0xED7944AEBD0C4AE2: Fri may 25 15:38:14 2012 severity: 2 type: 2 App: application control data: IvHG
  time GUID:0xED7944AEBD0C4AE2: Fri may 25 15:38:14 2012 severity: 2 type: 2 App: application control data: IvHG
  time GUID:0xED7944AEBD0C4AE2: Fri may 25 15:38:14 2012 severity: 2 type: 2 App: application control data: IvHG
  time GUID:0xED7944AEBD0C4AE2: Fri may 25 15:38:14 2012 severity: 2 type: 2 App: application control data: IvHG
  time GUID:0xED7944AEBD0C4AE2: Fri may 25 15:38:14 2012 severity: 2 type: 2 App: application control data: IvHG
  time GUID:0x97C9F5F641D25E5F: Fri may 25 15:38:14 2012 severity: 0 type: 2 appystem data: VM:LINK d6x102xdc6ff029cb2aedf9ecc1cc45a5fb474d
  time GUID:0x97C9F5F641D25E5F: Fri may 25 15:38:14 2012 severity: 0 type: 2 appystem: 5376 data module cannot refer to net.rim.device.api.system.RuntimeStore
  time GUID:0x97C9F5F641D25E5F: Fri may 25 15:38:14 2012 severity: 0 type: 2 appystem data: Module "d6x102xdc6ff029cb2aedf9ecc1cc45a5fb474d" trying to access a secure API.
  time GUID:0x97C9F5F641D25E5F: Fri may 25 15:38:14 2012 severity: 0 type: 2 appdata error: Linker ystem: "VerifyError" for d6x102xdc6ff029cb2aedf9ecc1cc45a5fb474d
  time GUID:0x97C9F5F641D25E5F: Fri may 25 15:38:14 2012 severity: 0 type: 2 appystem: data from d6x102xdc6ff029cb2aedf9ecc1cc45a5fb474d error: Module "d6x102xdc6ff029cb2aedf9ecc1cc45a5fb474d" trying to access a secure API.
  time GUID:0x9C3CD62E3320B498: Fri may 25 15:38:14 2012 severity: 1 type: 3 app:Java data exception:
  RuntimeException
  Error starting d6x102xdc6ff029cb2aedf9ecc1cc45a5fb474d: Module 'd6x102xdc6ff029cb2aedf9ecc1cc45a5fb474d' trying to access a secure API.
  net_rim_bb_framework_api-1 (4BCA1C67)
  ApplicationEntryPoint
  run
  0x147F
  net_rim_bb_ribbon_app-3 (4BCA1F39)
  ApplicationEntry
  invoke
  0x4D8
  net_rim_bb_ribbon_app-1 (4BCA1F39)
  RibbonLauncherImpl
  
  0x5E6D
  net_rim_bb_ribbon_app-1 (4BCA1F39)
  RibbonLauncherImpl
  launch
  0x3AA4
  net_rim_bb_ribbon_app (4BCA1F39)
  ApplicationMenu
  trackwheelClick
  0xA78
  net_rim_bb_ribbon_app (4BCA1F39)
  ApplicationMenu
  navigationClick
  0xA98
  net_rim_cldc-12 (4BCA1C15)
  Screen
  dispatchNavigationEvent
  0x71D6
  net_rim_cldc-13 (4BCA1C15)
  UiEngineImpl
  processMessage
  0x743B
  net_rim_cldc-8 (4BCA1C15)
  Application
  
  0x29CF
  net_rim_cldc-8 (4BCA1C15)
  Application
  processNextMessage
  0x1AE3
  net_rim_cldc-8 (4BCA1C15)
  Application
  enterEventDispatcher
  0x1A20
  net_rim_bb_ribbon_app-1 (4BCA1F39)
  RibbonLauncherApp
  main
  0 x 3202
  time GUID:0x97C9F5F641D25E5F: Fri may 25 15:38:18 2012 severity: 0 type: 2 appystem data: JVM:INFOp = 293e80a8, a = '5.0.0.592', '5.2.0.64' = o, h = 8c000f03

  I apologize for the response to my own post, but I think I have found the cause of the problem.

  The indicator has been in the error log:

  Error starting d6x80x5eb0f0ad298dd67a21dc74be0323b592: Module ' d6x80x5eb0f0ad298dd67a21dc74be0323b592-1' attempts to access a secure API. "

  It seems that each .cod file requires corresponding .cso and .csl file. The OTAInstall directory contains several, numbered in the order the .cod files. Each of these files requires a pair of .cso and .csl files with the same name as the file .cod.

  
  

  For example, for an application with the "app", the OTAInstall directory name can contain several .cod files, that is to say:

  App.COD, 1.cod - app, app - 2.cod, up to n.cod - app. The same directory should contain app.csl, app - 1.cso, 1.csl - app, app - 2.cso, app.cso, app - 2.csl, up to n.cso - app, app - n.csl.

  This seems to be undocumented behaviour in bbwp.

  Did someone in the community able to answer why bbwp does not create these files? Is there a documentation which can confirm this obligation? Is there another method prescribed to create applications that mitigates these problems?

• Attempt to access an invalid address - Adobe Acrobat Reader XI or Adobe Acrobat Pro XI

  My spec:

  -OS: Win 7 Ultimate SP 1 64-bit

  -currently have Adobe Acrobat 9 Pro v 9.0.0 (works fine) - (AA9P)

  -I want to install the profile is an administrator account

  -All the A / V is disabled to include real-time protection real MS Security Essentials

  -MS EMET is off

  I tried the upgrade to Adobe Acrobat Reader XI (AARXI) or the trial version of Adobe Acrobat Pro XI (AAPXI) and get the same debugging message "attempt to access invalid address."

  I UNINSTALLED AA9P and THEN restarted. I then tried to install AAPXI = even debug message. No error was present during the installation and I also checked the MD5 signature on the download, I get a full set of install package

  I then UNINSTALLED AAP XI, then restarted.

  I INSTALLED AAPRXI and received no error during installation. Yet once, all facilities are caused under an ADMINISTRATOR account with all security software disabled. Tried to open AAPRXI and get the same debugging message.

  My OS has every available patch installed for Microsoft and third party.

  Any suggestions on how to correct this installation?

  I fell right on this issue when I disabled it EMITS to perform debugging things. Taken a few troubleshooting to understand.

  Aparently, if you have installed anytime EMET, that adobe is installed, the drive does not start unless the EMET options are enabled for AcroRd32.exe. So either you set EMITS the parameters of maximum security (you can do unless you're a programmer or tester pen) or EMET set all options for at least asking Opt In and configure Apps so the EMET options are enabled for AcroRd32.exe.

  Or... Uninstall EMET, but then your box will get jump overnight 0, so don't do that.

• attempt to access an invalid address

  I got the "attempt to access invalid address" message when you try to start the games that worked earlier, but also when trying to load new games. What should I do? What is the result of an update of a certain type? I use Norton and I think that the problem started then I subscribed.

  Hello

  ·        What game are you trying to play on the system?

  I suggest to find errors in the event viewer and let us know is it there.

  Procedure to view and manage event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

  If the question has recently started then, I suggest you do a system restore and check whether the problem is resolved.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Samsung SCX 4200 printer spooler service is not running"error; any attempt to add a local printer

  Samsung SCX 4200 printer spooler service is not running"error; any attempt to add a local printer

  For example, the print spooler runs?

  Type Services.msc in the box run from the start menu and check the parameters print spooler, set it to auto start.

  John

• Any attempt to create results by "Access denied" error zip file

  Windows 7 Professional 64 bit.  I am logged in as administrator.  UAC is not active on this machine.

  Any attempt to create a zip file results in a dialog box stating "unable to complete the operation.  Access is denied. "

  If I select a file or group of files/folders, do a right click and say 'Send to Zip', I get this error.  Interestingly, while the error dialog box is still open, the zip file will be displayed in the current folder.  Clicking OK in the box dialog error cancels the dialog box and deletes the zip file.

  This seems to be some sort of permissions thing.  Can I create a zipfile by clicking right in the Explorer window by clicking on "new", then "compressed (zipped) folder", and it will create the file very well.  I can even give it a name.  Any attempt to copy anything in this new zip file generates an error "file not found or no read permission.  Try to delete the zip file says 'you need permission from administrators to make changes to this file.
  So now, I open the properties for the zip file and go to the Security tab.  It was there that I discovered that this file has no owner are entrusted to him.  I can then change owners, add my name as the owner of the file, assign full control to myself, apply the changes, and now the zip file can be read/written/removed normally.
  So whenever I need to create a zip file, I have to go through the steps of creating-> change the properties of the-> Assign owner-> Apply-> add files to the Zip file.  It's a royal pain in the keester.
  My question is: what changes to do to confide as the owner by default when a zip file is created?  This seems to happen with only zip files, any other type of file gives me this problem.  What happened since I got this computer brand new with Windows 7 64 - bit on it.  I can't say that it is a "Virgin" installation, he was photographed by a group of COMPUTER companies (I work for a fairly large company).  This group is a clue what happens and apparently others in our society do not report this problem.

  Solved! The problem is with the permissions on the 'TEMP' directory which is used during the process of zip. See this announcement and scroll down to "more useful answer.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-files/when-i-try-to-use-the-send-to-compressed-zipped/264ba861-1262-4181-94ed-0f00325604f5

• I am trying to convert a pdf to Word and continue to receive an error message "year error occurred during the attempt to access the service.  Any suggestions?

  I am trying to convert a pdf to Word and continue to receive an error message "year error occurred during the attempt to access the service.  Any suggestions?

  Hey lee,

  Are you still facing this problem?

  Have you tried accessing the service by using the browser: http://cloud.acrobat.com/exportpdf

  Kind regards
  Rahul

• BlackBerry smartphone Error Message "an error has occurred during an attempt to access a file on the computer"

  I get this error message when I try to sync my contacts from my outlook on my device:

  "An error occurred during an attempt to access a file on the computer"

  I use the new desktop version 7.0.0.43

  Any ideas?

  No problem at all.  I appreciate your help.  I finally solved the problem in parade the following:

  Via the Command line, run the following:

  Reg delete "HKCU\SOFTWARE\Classes\CLSID\" /f {B54F3741-5B07-11CF-A4B0-00AA004A55E8}

  Then, run the following via CMD line:

  c:\Windows\system32\regsvr32 vbscript.dll

  Uninstall worked after that and I reinstalled it the version you suggested.

• error device "sequence contains no matching element.

  Hallo,

  I just got the VirtualBench and I could use it as I connect it for the first time. I then downloaded and run the program to Window7, so that I would be able to run the program from my PC.

  Since then, I can't work increasingly with the virtualbench. It still gives the same error: device error: sequence contains no matching element.

  What it wronf what should I do?

  Note: I've read a similar question, but it seems that the error missing somehow for some unexplained reason. So, there was actually no mentioned of solution for this problem.

  Thanks in advance for any help.

  Hello Zach Hindes,

  Your idea has solved my problem.

  After the zero (button at the rear of the instrument virutalbench) I could successfully start the application. The error message disappeared and I could interactively use the instrument interactively.

  I reinstalled the software on my PC (Win7) and it runs smoothly also.

  The solution is so simple that I wonder that I wasn't thinking about him in the first place...

  Then, I suggest that developers could add the suggestion to reset the error message. I am sure, that would help a lot of people.

  with my best regards

  Stone

• Source:-elxcna (adapter Emulax CNA) event ID:-129 error:-\Device\RaidPort1, restore the device, has been published.

  Hi all

  Source:-elxcna (adapter Emulax CNA)
  Event ID:-129
  Error:-\Device\RaidPort1, restore the device, has been published.
  Server:-Server Rack, Windows 2008 R2
  Installed application:-installed Backup tool and IBM tape library connected by Cisco nexus switch

  Summary:-each time the backup tool initiating any SCSI command etc. for library of tapes, just after a few minutes in the event log, server shows "restore the device, \Device\RaidPort1, has been issued." and the tape library configured in backup tool disconnected from the physical tape library.

  Up to now steps below was taken but no luck:
  1. test Unit Ready has been disabled in the registry
  2 adapter ANC, fresh of zoning has been replaced.
  3 firmware and driver from the adapter of the ANC has been updated.
  4. timeout was defined according to the guidelines of this document:- http://blogs.msdn.com/b/ntdebugging/archive/2011/05/06/understanding-storage-timeouts-and-event-129-errors.aspx

  Comment:-26 fev 12:00 Am, I put to tape library firmware update and then we got
  This 129 February 26 event id error 03:00.

  Need help? :)

  Hi SabarnaDeb,

  Thanks for posting your query in the Microsoft Community Forums.

  As the question is limited to Rack in Windows 2008 server, it is better suited for the IT Pro TechNet public. Please ask your question in the Forum on TechNet Support.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.