Pavilion dm4: error diagnostic system

Similar Questions

• 0xe0ef000e on hp Pavilion dm4 error code

  Hei.
  
  I have a new hard drive on my hp pavilion dm4. The recovery cd do not work and do not work the free image click on the two see the error 0xe0ef000e box. What can I do?
  
  Thank you

  Hello again ericmartinez,

  Thanks for the information on your question. 0xe0ef000e error is usually an indication that your master boot record is damaged, but that you have a new hard drive, I think that in this case you use the recovery disks. I recommend that you order a new copy of your recovery media that is always available for your computer. You can order online at the page HP Pavilion dm4-1253 cl Entertainment Notebook PC support - order software support and pilot .

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• Error diagnostic system (resources and performance monitor) - conflict of property values

  Get error message "property a conflict of values" which attempt to run System Diagnostics.

  Looks like you may have a virus or other malware.  Try to start safe mode and run your anti-virus program to make a complete analysis of the system.  There are a number of suggestions along this line to the position of moderator of the forum Keith

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  If none of this helps you run SFC/scannow from the command prompt in administrator mode.

  I hope this helps.  Good luck.

• HP Pavilion dm4-2070us: network adapter Atheros AR8151 PCI - E Gigabit Ethernet Controller Driver Windows 10 Qualcomm

  Network adapter Atheros AR8151 PCI - E Gigabit Ethernet Controller Driver Windows 10 Qualcomm
  Options
  10/11/2015-12:08 AM
  Product name: HP Pavilion dm4-2070us
  Operating system: Microsoft Windows 10 (64-bit)
  Laptop: HP Pavilion dm4-2070us OS: Windows 64-bit 10
  
  Problem with the Qualcomm Atheros AR8151 PCI - E Gigabit Ethernet Controller driver network card driver does not not on Windows 10
  
  I've had this laptop for the past 3 years, running on Windows 7 very well, but a few weeks ago, that I've upgraded to Windows 10 when the Wired internet connection stopped working. Whenever I connect the Ethernet cable in the network settings, it says 'Unidentified network' "no internet access. I tried updating the driver, uninstall and reinstall the driver, call Microsoft to help but nothing seems to work. And there is no update driver for Windows 10 on hp.com is a solution for this problem? Help, please.

  Hi Mrstenter,

  The link (atheros.cz) you provided has the same problem. However, I found solutionon the below mentioned link. He was the pilot I needed and it worked! No both my cable and internet connections don't work.

  SOLUTION: Downloaded the driverscape.com driver, double-click to open, double-click on the appliction of installation file, select the option repair the installation, and then follow the prompts. Restart the computer after installation. Mine worked.

  Thank you very much for your help.

  http://www.driverscape.com/download/Qualcomm-Atheros-ar8151-PCI-e-Gigabit-Ethernet-controller-%28ndis-6.30%29

  

• On a 1100sa Pavilion DM4 how prevents one error message: unable to start Bluetooth stack service?

  I have a HP Pavilion DM4 1100sa, p/n: XE139EAR #ABU, a serial no: CNU1220Z75. I bought it about 2 weeks ago. Shortly after he stopped hibernating when I closed the lid and the fingerprint reader was also very intermittent, also error message unable to start Bluetooth stack service popped up after the computer has been rebooted and after startup of Internet Explorer... My own attempts to remedy that does not so I called your 0844 3690369 number and possibly your man said that the only option was to do a complete restore of the system. For this I made and then reinstalled my commercial software such as M/S Office 2010, Adobe Photoshop elements 9 etc.

  The error (see above) again reappeared and the fingerprint reader was still intermittent, also my Bluetooth mouse is not connected. Yet once, my own attempts to cure these problems have failed, including playback of your pages in the forum, so I phoned again, everything seems to be resolved but the initial problems and the subsequent, reappears.

  So I made an another System Recovery on Thursday, July 26, 2012. I did a full defragmentation and wiped the free space on the hard drive. This time, the only problem that occurs is the error message failed to start Bluetooth stack service. Yet once it appears only after a computer reboot and start Internet Explorer.

  I am very reluctant to spend another hour, or so, on the phone so I want your best and hopefully correct advice on how to avoid this very annoying message from popping up.

  Mike

  We will uninstall the system Broadcom bluetooth driver and that's it.

  We will not install another driver for this device instead.

• Pavilion dm4-3090se: how to use the SSD after restoration of the system of Windows backup disks?

  Hello

  After a lot of work, I finally could restore my OS using Windows backup disks that I created a few years back. (The OS has been corrupted when the power has been accidentally deleted from the system and the battery was dead)

  Restoring backup widows put everything on 444 GB C drive.  Nothing I put on the SSD drive d:-20 GB and there is nothing in the tools of HP E: drive - 4 GB

  How can I make use of the SSD drive to help speed up the system?  I see the system starts and runs more slowly now.  I'm ready to blow the current operating system and re-run the Windows backup utility.  But I need to know how to use the SSD during the restoration.

  Any help is appreciated.

  Thank you

  Bob

  Hey @llebrez,
  
  Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!

  I understand that you have some information about using the SSD in your HP Pavilion dm4 Beats Edition Entertainment Notebook. I'd be happy to help you with that.

  The SSD in your laptop is used for a technology called Intel Smart Response. Intel Smart Response uses the SSD as a type of Cache smart to help load the items faster. The reason why that is not used currently is because the restoration of the system is not designed to use the SSD for intelligent caching and is not able to establish that on its own.

  If you want to configure Intelligent caching on your laptop, you can follow this guide provided by overclock.net: how: implement the Intel Smart Response Technology (SSD caching)

  I hope this helps. If you have more questions that I'm able to answer for you, please do not hesitate to ask.

  Please hold me.

  By pressing the Thumbs Up button below, you can always say thank you!
  
  See you soon.

• Pavilion dm4 does not start: black screen with cursor blinking up to no left, no error message

  Nowhere on my HP Pavilion dm4 close last night and does not restart.  When I turn on the computer, I get a black screen with a cursor blinking in the upper left corner.  I ran a variety of diagnostics and all seems OK (i.e. no error message).

  I am able to start the computer in mode 'Media' - and I see all my files.  However, I'm unable to start the computer normally.  Help, please.

  My computer is old - 1 year and 25 days to 25 days outside the warranty period.

  Thank you.

  Hello

  Boot from the new rescue CD, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart now.

  Kind regards

  DP - K

• Necessary recovery manager. I have hp Pavilion dm4-1222Tx Entertainment notebook, Windows 7 64-bit operating system.

  I lost my DVD to my laptop recovery. Now I Heve reinstalled the OS with the drivers and want to create a recovery media for later retrieval options.

  Please help me to download the Recovery Manager. I have hp Pavilion dm4-1222Tx Entertainment notebook, Windows 7 64-bit operating system. Thank you

  Sorry, but HP only provides Manager HP recovery as part of the installation at the factory. HP doesn't provide downloads of the HP Recovery Manager and you may need to order recovery HP media to get the computer to a factory State. Please contact HP in your country / region via the Portal Support HP's worldwide to the order of HP recovery disks.

  If you have installed a "generic" Windows copy, you should be able to create an image of your hard disk system in Windows. Please see "Back up your programs, system settings, and files - System Image".

  Please click the White Star of KUDOS to show your appreciation

• HP pavilion dm4-3099se: sometimes no sound when I pass

  I have a laptop HP Pavilion dm4-3099se beats edition. Sometimes when I turn on my laptop so no audio from any player. I changed the players but problem not solved. I reinstalled my audio drivers from hp website, but its still occurs. Please help me solve this problem

  Hello @emasadkkhan,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I read your post about the problem of audio and wanted to help you!  I understand that when you start the laptop sometimes, there is no sound.

  First of all, try to review the following document that is related to your operating system and let me know how it goes:

  HP laptops - no noise or sound distortion from speakers (Windows 10)

  Laptops HP - no sound from speakers (Windows 8)

  HP laptops - no sound from speakers (Windows 7)

  HP Notebook PC - error: No. Audio Device is installed (Windows 8, 7 and Vista)

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great weekend!

• incomplete restore on hp Pavilion dm4

  Hello

  I m just try using the recovery system my HP Pavilion dm4 laptop beats edition and it s being a nightmare... the fact that HP Don t includes a CD to reset the computer to factory settings is an incredible headache.

  Model: HP Pavilion DM4-3002ea beats edition Notebook PC Entertaintment

  Product number: A8J22EA

  OS: Windows 7

  I created a hollow of recovery DVDs, media recovery software, but I have tried 3 times and no luck. After I installed all 4 DVD my computer turns off and when I reboot I get a message saying MSDOS:

  "Please wait...".
  upDrvLtr:C:
  _"

  Then, I get a screen that says:

  'Restore Icomplete '.
  The restore did not complete.
  "Please select one of the following buttons: Save log/details/Retry.

  If I click on "Détails", I get the following error:

  «Sysprep not properly launched...»
  "The process results in panic CTO because the image isn't normal."

  So I tried to order a new hollow disk best2serve.com but it s recovery is not possible because my laptop is in English and I live in Germany, whenever I place my order on the English site and I try to pay, the web redirect me to the German site where my laptop model is not found. I send a message but no response.

  I also tried to install a new copy of windows 7, but it stops because it requires drivers for my computer. I downloaded the drivers from your site, but it seems that .exe files are not recognized.

  So... what I should try before you screw up my laptop?

  Thank you.

  After reading dozens of post on this subject, I found the solution... as dumb by changing the USB where I have WIN7 on a different USB port. It seems that I was using a port USB3...

  I now have a clean Win7.

  In any case, thanks for your help.

• HP Pavilion dm4-1024tx Enterta: upgrade to 8 GB of memory and is blue screen problem

  Product: HP Pavilion dm4-1024tx Entertainment Notebook PC
  Product number: XC651PA
   
  I have corsair Vengeance ram 8 GB (CMSX8GX3M1A1600C10) that as a result of the configurations as mentioned below:
   
  SPD 9-9-9-24 latency
  SPD speed 1333 Mhz
  SPD voltage 1.5V
  PC3-12800 (1600 MHz) memo speed
  Tested latency 10-10-10-27
  Tested 1600 Mhz speed
  Tested voltage 1.5V
   
  It passes the test of memory BIOS.
   
  BIOS VERSION: Hewlett-Packard F.27, 21/12/2011
   
   
  But when I boot windows 7, it shows the windows symbol and then it shows the blue screen with the error
   
  STOP: 0X0000007E
   
  If I replace memory corsair with the memory that has been delivered with the laptop the system only works very well.
   
  Corsair memory is not compatible with the system?
   
  I have a dual boot and installed ubuntu on this subject. Ubuntu loads perfectly fine, but after a while the system restarts automatically (IE open application).
   
  I tried memorytest86 to test the memory, but the application continue to crash and reboot and does not provide any results.
   
  Help, please.

  The RAM is not compatible. The system allows a maximum total memory of 8 GB and uses DDR3-1333 which downclocks at 1066 speed. You cannot use a single module of 8 GB. 4 gigs is the large single module supports the system. I suspect the memory that you have will work fine if you had modules of 2 x 4 GB instead of a single module of 8 GB. That's why memtest is not finished. The controller memory motherboard is not able to take up 8 GB of RAM by a single channel.

• Pavilion dm4, replacing hard drive

  So, I have a HP Pavilion dm4 1165 c: windows 7 64 bit, around a Yes and a half old.

  A week before, the hard drive suffered a kind of permanent fatal event and quietly left this death spiral.  If you want to know: any type of shoe was impossible.  System recovery could not even see the drive, an external drive could not speak of it, and it crashed to any machine that has tried.  I had to send it to data recovery - they tell me that the reader has hard errors and at least one of the drive heads does not.  They will be able to pick up stuff for me, but the reader is a loss (yes I know, I know - I should have backed up).

  So in my opinion it - I have two problems to solve.  1. I need a new hard drive.  2 - I need stuff to put on my hard drive (it came with nothing - I don't have the disc for the operating system, drivers, nothing).  That offer HP which determination of these problems?  How much are these options?  Who should I talk to?  (I tried to call tech support, but there was a bit of a language barrier.  Also, I'm out of warranty, and they want $60 to solve problems before they'll still talk about replacement of hardware and/or software).

  Hello:

  You can order a 500 GB hard drive 7 200 to replace your existing one.  You can't go smaller if you want to use recovery disks.

  I love this place to order PC hardware.

  http://www.Newegg.com/product/ProductList.aspx?submit=Ene&N=100007605%20600030594&IsNodeId=1&BOP=and&order=rating&PageSize=20

  I'd go with the first listed, but it is up to you. Look at the reviews and the price and choose the one that suits you best.

  You can order HP recovery discs. You will need to call them as the link to the website to order them is broken.  Cost should be less than $20.00

  You will need the complete model number of your PC. I do not see a dm4 - 1165dm.  I see a dm4 - 1165dx, and you will need to provide the serial number.

  If HP has a set of recovery disc for your PC, you can use this workaround to install W7 on your new HARD drive.

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-s p1-iso-of-digital-River.

  Paul

• Pavilion dm4 - 3013cl - recovery deleted partition

  I'm of the Brazil.

  On a trip to Hawaii in March 2012, a friend bought a HP Pavilion dm4 - 3013 cl entertainment pc, product number A6X70UA # ABA. Of course, it came in English. Given its difficulties with the use of the equipment, I proposed to install windows 7 in Portuguese.

  The system did not accept the update. Then I got the "great idea" to remove the recovery partition. After I created the new partition and formatted. Now, I can not install windows 7 home x 64 premmiun.

  At the end of the installation, in the first start, in the direction of the item "finish installation" opens a window titled "Windows Installer" and reported the following error message:

  "Windows could not configure windows to run on a hardware on this computer."

  When the system has restarted, the 'mouse' was not available and open a window titled "Windows Installer" showing an error message again, this time in Portuguese:

  "Windows is unable to complete the installation. To install Windows on this computer, run the Setup again. »

  When I restart the installation, the problem repeats.

  Unfortunately, because it is an imported product, the HP to the Brazil offers no technical support.

  It would be good to have help from friends here in the forum.

  Best regards

  Turkish Lira

  Problem fixed!
  Obrigado a todos!

• Unable to access Windows Update HP Pavilion dm4 Windows 7 64 bit

  My setting for Windows Update has always been - automatic.  When I realized that the update had done nothing since April, I tried an update manually and repeatedly getting the message: ' Windows Update cannot currently check for updates because the service is not running. "  You may have to restart your computer", I restarted, tried MS 'FixIt' - no change.   64-bit HP Pavilion dm4 window 7

  Paul - the link was not one I wanted to try. I found this fix on the Forum of MS response:

  Go to Control Panel > click on Windows Update

  Click change settings (upper-left)

  under updates, click on the drop down arrow

  Click never check updates

  Press OK

  Close the Control Panel window

  Then the closing session and Re-start Windows fresh.

  When you're ready, go back into the Control Panel > click on Windows Update

  Click on change settings (upper-left)

  under updates, click on the drop down arrow

  Now make the choice you need for automatic updates

  Press OK when done

  Close the Control Panel window

  Then make a fresh visit to Windows Update.

  If you have already tried the fixes that didn't work, the foregoing can at least get a point better, "but with update errors then you can do a system restore.  I did mine to the last point of "automatic system restore" which was 31/05/12.

  It worked for me and I spent 2.5 hours installing all missed updates.  My computer works better when it is new!

• HP Pavilion DM4 1160us - blue screen with rays of light from above

  HP Pavilion DM4 1160us running Windows 7 Home Edition

  I was logged off system and on the rear connection, slider received rotation that never finished, connect.  EU force power off.  (When you start the system, received option 1) attempt to recover or 2) start as usual (same results for both).  Seemed to start as normal - then a progress bar display "loading files" - followed by blue screen (and big arrow cursor) - quick flash of a (too fast to read) command window.  The hard drive activity light was on during a few seconds, the flicker for several times, then went.  Nothing would happen ever after that it and the blue screen remained.

  I also ran well to launch HD diagnostic tests - he failed the extended test.  I removed the original drive Toshiba MK5056GSY and replaced by a 32 GB drive my old Dell Inspiron came with, run installation of a new operating system and the HP boot works fine (less the HP drivers).

  I have not yet tested the "faulty" drive but will be when I get an external hard drive case.  It lasted exactly 3 years.

  I would replace the drive with a WD7500BPKT drive that is 750 GB.

  My question is ' the computer/motherboard/BIOS Board will manage the bigger drive?

  A 750 GB hard drive should work fine.