CD-Rom indicated that all disks are not formatted.

Similar Questions

• Visual studio displays an error message indicating that these functions are not in the context.

  Original title: c#

  I am using visual studio 2010... but when I use commands like ToInt, den ToDouble etc, it shows an error indicating that these functions are not in the frame... Please give a solution... Thank you

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• All disks are not (but OK after power cycle). 5.3.12 T3

  Hello

  I have a ReadyNAS NV + v2 with 4x2GB HDD.

  He was fine on 5.3.12 T3, but twice in the last week, I noticed the morning (he auto-fermetures to 02:00) on the screen LCD allows you to select the message saying disks 1-4 have failed.

  I have to unplug/Plug and it challenges very well.

  Newspapers by e-mail

  Thank you

  Andy

  Thanks for the newspapers.

  Your disks are in need of a firmware update.

  First back up your data.

  Then update the firmware on your drives firmware CC3D.

• During the process of closing on windows 7, my PC does not enough time see that all programs are not closed

  When I closed my computer to Windows 7 Desktop, the time allowed to see that a program is still running is so brief that there is no time to cancel close long enough so that the other program is finished. I changed a few settings to 1 second earlier, which is probably the problem but I can't remember where I changed the amount of listening time. Do you know where can I change these settings?

  Hi Brenda,

   
  Thanks for choosing Microsoft Community!
   
  You are welcome!
   
  I am happy to know that the problem is solved.
   
  Don't answer if you need more assistance. We will be happy to help you.

• To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  Hello m.velentino,

  Not sure if you are still having the error message isn't valid win32.applicaiton.

  Get the error: not a valid 32-bit application can have several origins:
  I have listed some of them below.

  The file is corrupted, bad or missing.
  -If the hard disk is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.
  -If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

  File is not designed for your version of Windows:
  -If you try to run a program that is not designed for your version of Windows, you can get this error.
  -Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.
  -If the program is an MS-DOS program more former start program or Windows, you can get this error.
  -If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  File is a virus, worm or other malicious program file.
  - This error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.
  -If the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
  
  Hardware incompatibility.
  -If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.
  -Download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Let us know if these suggestions help you.

  Marilyn

• NSS4100 RAID DOES NOT START, please check that all components are present

  Hi, NSS4100 storage system could start the raid10.

  The message is:

  --

  The RAID boot failure
  Please check that all components are present

  --

  All disks are present, as you can see in the picture as an attachment. The system has been restarted twice. Is there a possibility to start the raid without losing data?

  Thank you, Dan

  There number so that you can configure for RAID Array (JBOD, RAID0, RAID1, RAID5, RAID5 + Spare and RAID10). I read your posted, the system configured for RAID10. RAID10 is operated like a pair of mirror of data.

  Here are a few RAID array information:

  (1) JBOD (no data protection, when your drive is bad.) You have lost all the data). The notion of read/write date is the same for PC. Fast at the beginning, but the data you have on the disk, it will eventually slow down.)

  (2) RAID0 (no data protection, however, to write the disk data is better in performance. A drive is dead, then the data is lost)

  (3) RAID1 (data protection. A drive is dead. Others always in activity and degrades performance.)

  (4) RAID1 + Spare (Similarly for RAID1, just an automatic rebuild RAID1 for when a drive broke down)

  (5) RAID5: (Protection of data. Minimum of 3 disks. Authorized a disc goes down)

  (6) RAID5 + Spare: (data protection. Need 4 drives. Auto regeneration when a faulty drive)

  (7) RAID10: (Protection of data. Working together with the disc into the slot 1/2 is first pair and disks in the 3/4 Groove is the second pair). This is important because the disks in the Groove 1/2 cannot be placed on the slot 3/4 if she already had the information RAID10. Error I've seen since the GUI is like to drive may have been moved or exchanged around unintended.

• I like the develop module, but I'm doing something wrong in the library in library, under 'Catalogue, all the photos', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard d

  I love the develop module, but I'm doing something wrong in the library

  In the library, under 'Catalogue, all the photographs', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard drive. When I re-import them in Lr, the changes are not there. My workflow is to do nothing after development or export them to the original with a new file name destination. Anyway, it is that they get a new file name without change of development when they are imported into Lr.  Please help (PC user)

  And others have explained, Lightroom does not apply the changes to the file. All changes are stored in the catalog, and then applied to the image when it is displayed in Lightroom. If you want a copy of the image with any changes so that you can share with others or send it to a laboratory to print, then you must export a copy of this image by using the export dialog box in Lightroom.

  Features of Lightroom as well by its design. The images that you import are always left in their original condition, unmodified.

• When I select Help and support icon, I get an error message indicating that the feature could not start.

  help and support does not work

  When I select Help and support icon, I get an error message indicating that the feature could not start.

  I use a Vista 32 bits on a HP computer operating system model number m8300f.

  In addition, I bought a copy of Win 7, but who could not load freezing during installation.

  Hello

  Try to run the command in the elevated command prompt, follow the steps below, it could help us solve the problem.

  1. open the start menu, click programs principally made, select accessories.
  2. right click on command prompt, and then click "run as administrator ".
  3. type the following commands in the DOS prompt window and press ENTER at the end
  of each line:

  REGSVR32 MSXML3. DLL/U
  REGSVR32 MSXML3. DLL
  REGSVR32 MSXML6. DLL/U
  REGSVR32 MSXML6. DLL

  (At the elevated command prompt command should not give us any error).

  Restart the computer and try to access help and Support.

  For the problem of installation of windows 7.

  We would like to get more information about you to help solve your problem. You better, please answer the following questions.

  1. How did you start the installation process?

  2. you perform a new installation or an upgrade?

  3. what type of drive you are using for installation?

  4. at what stage of the installation has it stopped?

  5. have you received an error message?

  First of all, I would say that you disconnect external devices connected to the computer except the keyboard and mouse.

  If you have performed an upgrade suggests to restart the computer and you will be prompted for a roll back option.

  Once you're on the office suggests to run Upgrade Advisor and check what needs to be done before you start the upgrade.

  Before you begin the upgrade process to ensure that your computer meets the condition of equipment to install Windows 7 and check on the website of manufacturer computer if the computer is good to run windows 7 or not.

  Installing and reinstalling Windows

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows

• I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00. All options are not enabled. How can I change the time, updates are made? __

  I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00.  All options are not enabled.  How can I change the time that updates are made?

  Hi imoffshore,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         When was the last time it worked?

  ·         Remember to make changes to the computer recently?

  ·         You have security software installed on the computer?

  ·         You get the error message?

  When you open the tab automatic updates in the control panel or My Computer property sheet, all options of configuration of the automatic updates may be grayed out. This happens due to one of the following reasons:

  1. You are not logged as administrator (or equivalent)
  2. Strategy of automatic updates is enabled
  3. Automatic updates (and Windows Update) access is blocked by group policy

  The options available for automatic updates.

  You must make some changes in the windows registry.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  • Click Start, run and type REGEDIT to . EXE
  • Go to this location:

  HKEY_LOCAL_MACHINE-SOFTWARE-policies-Microsoft-Windows------WindowsUpdate------AU

  • In the right pane, delete the two values AUOptions and NoAutoUpdate
  • Go to this location:

  HKEY_CURRENT_USER-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------WindowsUpdate

  • In the right pane, delete the DisableWindowsUpdateAccess value

  Using the Group Policy Editor - for Windows XP Professional

  • Click Start, run and type gpedit.msc
  • Navigate to the following location:

  => Configuration of the computer
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, double-click Configure automatic updates and set it to not configured
  • Next, go to this location:

  => User configuration
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, set to remove access to all Windows Update features on not configured

  Change how Windows installs or notifies you of updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I've set up file sharing in Windows Vista, and it shows that all folders are shared even before I share them.

  original title: sharing of Windows Vista

  I've set up file sharing in Windows Vista, and it shows that all folders are shared even before I share them.  When I go the file that he always asks if I want to share the folder and when I look at the properties he says not shared... what happens?

  Hello

  I suggest you to read the following article on the essential elements of file sharing and to try to share the files again.

  http://Windows.Microsoft.com/en-us/Windows-Vista/file-sharing-essentials

• Error "the dynamic disks are not supported by this operating system." what configuration Raid 0 (striped) readers.

  I have my operating system installed on a single disc, and I bought two additional discs I want to implement in a Raid 0 configuration. I'm going to administrative tools > computer management > disk management > right-click on a single disc and select the new striped volume > add the second drive and fill the dialog box until I get to the part where the formatting is supposed to start. Then I am stopped by an error that says "the dynamic disks are not supported on this operating system."

  Who says that hard drives, I bought are not compatible with vista interlacing or it says that vista can not the striped disks. What is the problem?

  You need to configure raid 0 before installation of win, you cannot "convert" s simple drive to the part of a matrix of blocks.

  In general this is not a good idea to use software raid, too a overload the CPU. If you want to raid, invest in a dedicated hardware raid card, which for a decent cost probably more than your motherboard

• How to change settings is disconnected so that other applications are not automatically closed?

  original title: log settings (windows 7 Home Premium)

  For Windows 7 Home Premium, how can we change the log settings so that other applications are not automatically closed with log off?

  I'm trying to keep Microsoft Word and files that I have worked on before closing logon.

  [Moved from the Word forum; please move again, if this isn't the right subforum]

  At best, I think all you can do is Pin password to your taskbar,

  Enable recent items, jump lists

  Right click your Start button and select Properties,

  Check the two boxes of privacy,

  Then at least you will have this item / items on the jump list, you can open it immediately when you log back in.

  

  You will still need to manually, save your work or value Word Auto save every minute / 60 seconds...

  But when your disconnect there is no way to have a program remain open.

• With Adobe Muse when I make a change, I have a second user Admin how do ensure us that these changes are not overridden

  With Adobe Muse when I make a change, I have a second user Admin how do ensure us that these changes are not overridden

  If you're both using Muse, then it is no different that is both using PS, you HAVE, Word, etc. You must use a mechanism that allows all both have access to the most recent version of the .muse file (i.e. the creative Cloud Files, Dropbox, file server location folder, etc.).

  Changes made in the browser will be able to be synced to the .muse file. Changes in Muse are saved in the .muse file and if you go to work on the site of Muse on two different machines then you must have the updated on the other machine .muse file.

• While I'm trying to remove the MPEG-4 file, it says "make sure that the disk is not full or write protected and that the file is not currently in use.

  Original title: When I'm trying to delete file MPEG4, is not deletion. How can I delete file MPEG4?

  While I'm trying to remove the MPEG-4 file, it says "make sure that the disk is not full or write protected and that the file is not currently in use.

  Hello
   
  Method 1: Ownership of the file and then try to delete and see if that helps.
  Reference:
  How to capture a file or a folder in Windows XP
  http://support.Microsoft.com/kb/308421
  Method 2:
   
  Error message when you try to delete a file in Windows XP: "access denied".

  http://support.Microsoft.com/kb/298345

• When you try to download Silverlight, I get a message that says that Windows Installer are not available.

  Windows Installer is not correctly installed

  When you try to download Silverlight, I get a message that says that Windows Installer are not available.  Windows install is not properly installed.

  How can I fix it?

  I am running XP Home Edition.

  Thank you

  Hello

  1. you try to directly run the silverlight program without saving it on the computer?

  Run the following article fixit tool and check.

  Diagnose and solve the program installation and uninstallation problems automatically

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall