Error F:\ is not accessible, the setting is incorrect. "after you connect a hard disk.

Similar Questions

• Error - DRIVE - no IS NOT READY - the SYSTEM IS STOPPED after having installed a hard drive.

  Original title: need HELP just installed new HARD DRIVE.

  I adjusted has installed a new drive WD Desktop Hard in a Pent III; TRIED to raise the HD; computer and then tells me that the TRAINING SYSTEM - no IS NOT READY - IS INTERRUPED. I checked all cables & connections; & Yes by turning the hard drive. What am I missing or very probably wrong. Any HELP.  Sincerely of Merlin

  Hi Merlin,

  Thank you for the information.

  Have you tried to run a check disk from the BIOS (Basic Input Output System)? If this isn't the case, you can try to do a hard drive from the BIOS test & see if the problem still occurs.

  If you are not comfortable with the BIOS, you you contact the manufacturer of your computer for help.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• kb2596615 causes ade to failure, error was 459: object or class does not support the set of events

  A couple of my users started getting our application error messages ade grown after you apply this update. Everything is well after its withdrawal. First mistake was 459: object or class does not support the set of events. Basically, no event has worked. Why is this update break my application? It should be removed from the queue of the update.

  Okay, I've worked on it with Microsoft, and the actual cause turns out to be:

  MS12-060 security update affects the functionality of Access database
  http://support.Microsoft.com/kb/2748410

  This article updated fingers MS12-060, specifically KB 2687441, as the culprit.

  It turned out that ActiveX controls on the form (specifically the Microsoft Common Controls 6.0 Toolbar), caused the failure.

  The solution was simple: on a patched machine, open each form with an ActiveX control in design mode, compile and save it. It worked for me. Ignore the details of the solution that I wrote in the previous post!

  You may need to resave MSCOMCTL. OCX, as suggested in the article, to get your databases to work.

  -Ken

• Receive error messages: E:\ IS NOT ACCESSIBLE THE DISK STRUCTURE IS DAMAGED AND ILLISIBLE and unable to run CHKDSK at startup

  Original title: corrupt master file table pleae help

  Hi all I have a problem I hope that someone can help me with
  first of all, I have a toshiba satellite laptop computer running windows vista.i have 2 drives c: and e:
  c being the main one with windows and e being the backup and where I put a lot of my files, movies, etc.
  IV had no problems atall and then I went to the E drive access yesterday and first had it that no info under the drive icon does say just LOCAL DRIVE E:
  When I click on it I get this message E:\ IS NOT ACCESSIBLE THE DISK STRUCTURE IS CORRUPTED AND UNREADABLE
  I tried to run chkdsk at startup and cmd prompt and I get this message "corrupted master file table.
  cannot recover master file table chkdsk abandoned... " Device Manager sees no problem. Event Viewer, says "the file system on the disk structure is corrupted and unusable. Please run the chkdsk on the E: volume utility. »

  I have a lot of files on the drive I want to lose.can someone give me advice on how to solve this problem, I hope iv gives you all the info you need. Thanks in advance

  Hi helzf,

  You can try to run a Checkdisk on drive E to fix disk errors that can cause this problem. You can make a backup of the data on this drive and try to run checkdisk.

  Check out the link:

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk.

  Hope this information is useful.

• Photosmart C5180 using Windows 8. Error message = Z:\is is not accessible - the handle is invalid

  I just bought a new computer with Windows 8.  I loaded the software for my Photosmart C5180 all-in-one printer.  It seems to print fine but when Itry to read a memory card I get an error message: -.

  Z:\is is not accessible - the handle is invalid

  Hello numuc95.

  I guess that the printer is installed network? Have you tried to install the printer with a USB cable? This seems to work best for access to the card reader.

  If you can not install with USB, look at this link to see if it helps:

  http://support.HP.com/us-en/document/c00149194

  I hope this helps.

• "an error internal, the setting is incorrect (0 x 80070057) ' in windows vista

  I tired to make a backup of my computer on an external hard drive but I have "an error internal, the setting is incorrect (0 x 80070057) ' under windows vista. How can I fix it because it won't let me do a backup?

  Hello

  Try the methods listed in the section below and check.
  "0 x 80070057" error message when you back up files in Windows 7
  http://support.Microsoft.com/kb/982736

  Note: The article above applies both to Windows Vista.

  I hope this helps.

• My forum ID is connected to my Apple ID email, but when I log in to the forum with my Apple ID email, I get an error and can not reach the forum. How do I merge my accounts so my Apple sign-in ID is working again?

  My forum ID is connected to my Apple ID email, but when I log in to the forum with my Apple ID email, I get an error and can not reach the forum. How do I merge my accounts so my Apple sign-in ID is working again?

  Apple ID cannot be merged. We'll see if we can get to the bottom of your connection error...

  Tell us step by step, in detail what your actions.

  Tell us a story

  -with a beginning, middle and end. We need to figure out what you know and that you have lived.

  If this problem is new, tell us what immediately preceded its appearance - add software, upgrade or update? New equipment?

  Quoted by of Apple  'how to write a good question.

  To help other members in answering your question, give as much detail as possible.

  • Include your name (peripheral) product and specifications such as the speed of the processor, memory and storage capacity. Please do not include your serial number, IMEI, MEID or any other personal information.
  • Provide the version of your operating system and the relevant applications numbers, e.g. "OS X 10.4.11" or "Safari 4.1.3.
  • Describe the problem and include all the Details on what seems to make it.
  • The list of troubleshooting steps you have already tried, or temporary corrections that you discovered.

  For a detailed 'coaching', please see usage tips , help us help you on these forums and wrote an effective communities of Apple Support question

  "Keep it short and Simple"-take your time... but be thorough - CCC

• I tried to update OSX 10.5.6 to leopard 10.6.3 and was not working due to a disk error but now my mac book does not, as the starting system, but after a few secons it will turn off itself, what should I do? Thank you very much!

  I tried to update OSX 10.5.6 to leopard 10.6.3 and was not working due to a disk error but now my mac book does not, as the starting system, but after a few secons it will turn off itself, what should I do? Thank you very much!

  You probably should have updated to 10.5.8 first.

  Installation or update of Snow Leopard:

  http://manuals.info.Apple.com/en_US/Snow_Leopard_Installation_Instructions.PDF

• I have W XP, SP3. Suddenly, Adobe reader showed the error: Acrobat could not load the DLL base.

  I have W XP, SP3. Suddenly, Adobe reader showed the error: Acrobat could not load the DLL base. Have Adobe reader X (10.0.1) who refuses to be carried away. Other than a drive X (10.1.0) has been reinstalled. Also have Acrobat reader 5.0 is installed from a CD of the Canon scanner slide. The error remains. If anyone can help. Leif Stg

  Hi Leif,

  Where do you get this error message?

  I suggest you to follow the steps and check if it helps.

  Method 1: Uninstall all the instance of Adobe reader and Acrobat reader and install the latest version of one of the drive and check if it helps.

  http://get.Adobe.com/reader/?promoid=DINRS

  Method 2: If the problem persists, perform a system restore and check if that helps.

  How to restore Windows XP to a previous state

• Error 1907. Can not save the fonts. Make sure you have sufficient permissions to install fonts.

  Original title: Windows 7 Installer error 1907

  How do I fix this"error 1907. Can not save the fonts. Make sure you have the necessary permissions to install fonts

  Hello

  
  1 does with a particular font or it occurs with all fonts?
  2 is this problem limited to the installation of fonts?
  3. you are an administrator of this computer?
   
   
  SFC scanner. Analysis (sfc) System File Checker will Windows replace corrupted or missing system files on your computer.
  Scan sfc enforcement procedure:
  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  b. click on continue or provide administrator credentials if prompted.
  c. in the type in the following command prompt window and press ENTER:
  sfc/scannow
  Refer to this article for more information:
  http://support.Microsoft.com/kb/929833

• error 105: could not resolve the address of the DNS server

  error 105: could not resolve the address of the DNS - why what it means and how to fix it?

  I get this message usually one or two times a day, usually in the afternoon, when I try to go to the internet.  I can use IE or Google Chrome - always get the message.
  Eighty-five percent of the time, I get very well connected.  But when I get this message, I unplug the cable modem from the power strip, wait 10 seconds, plug it in and after a few minutes, I'm connected to the internet.  How to solve this regular error?

  Hello

  You have to contact your internet provider (ISP) as DNS are usually associated with ISP. Have they reset their modem or router not only feeding cycle?

  Did you try the following steps below

  Start > all programs > Accessories > command prompt. Do a right click on it and "Run as Administrator". Type follows and press ENTER: ipconfig/flushdns

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  I hope this helps!

• Age of Empires 3 error 0003: could not compile the file 'aiLoaderStandard.xs '.

  People,

  I bought the version of digital download of age of Empire 3 full of steam for installation on my laptop Windows 7 Home Premium. Already, I have the CD versions of all games on my desk, but was also able to install it on my desktop in my Steam account.

  In trying to play the AOE3 game on my laptop, I get the following error:

  00:00:00 (0) xs: error 0003 could not compile the file 'aiLoaderStandard.xs '.

  The net effect of this error is that when I run the game, the AI does nothing. He can place a hometown and a Explorer and/or civil, but they do nothing. I tried to uninstall and reinstall the game several times. I also applied all the patches I could find, to include the last being.

  In addition, when you try to play the TAD version, I do not get the aiLoaderStandard.xs error, but it fails to load the map and never even begins.

  Help, please!

  Hello

  You can view the proposal contained in the link, and check:
  http://Forum.AgeCommunity.com/forums/thread/480165.aspx

  If the problem persists, you can create a new thread in the forum for better support.

• Backup has encountered a problem during backup of the C:\windows\system32\config\systemprofile\Desktop\music file. Error: (System does not find the specified path. (0 x 80070003))

  I had to uninstall iTunes a few months ago and successfully re-installed, but part of my music was missing.   At one point, following the instructions on a thread on the forums Apple or Microsoft, I saved my music library on the desktop. Since then, I do not have a library of music on the desktop file.  In my looooooong hours trying to fix things, I do not know if I deleted it or what.

  Now, I get the message:

  "Backup has encountered a problem during backup of the C:\windows\system32\config\systemprofile\Desktop\music file. Error: (System does not find the specified path. (0 x 8007003)) "whenever I have backup my computer.

  As I understand it, that does not affect really any other files, they rely on the spot (I think), but

  HOW CAN I GET RID OF THIS MESSAGE? or what is the cause?  Of course, I could use help in simple English, step by step, as I'm not very techno...

  Thank you!!!

  Try to be...

  SereneJulie

  Hi serene,

  Thanks for posting your query on the Microsoft Community.

  As indicated by the error, this problem appears, when these files/libraries that are saved automatically are not present on your computer. I suggest you to follow the steps below and check, if it can help solve the problem.

  • Create missing files that are listed in the error message.
  • Exclude files from the files to backup in the backup settings and then include these files in their original location. To exclude folders in other communities and to include these files in the original location, follow these steps:
    1. In Control Panel, open backup and restore.
    2. In the section back up , click change settings.
    3. In the dialog box Configure the backup , click Next.
    4. In the dialog box that you want to save , click Let me choose, and then click Next.
    5. Expand data files, library, expand additional locations, and then click to clear the check boxes folder AppData, Contactsand Research .
    6. Expand computers, expand the element of your system drive (for example, expand Local disk (c)), expand users, , and then click to select the checkboxes AppData, Contactsand Research if they exist.
    7. Click Next, and then click Save settings and exit.
    8. Backup and restore, click back up now to perform a new backup. The backup operation must complete without errors.

  If the problem persists, I suggest you follow the steps in the following article for troubleshooting backup problems.

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors

  http://support.Microsoft.com/kb/973455/en-us

  Come back and let us know the State of the question, we will be happy to help you. We, at tender Microsoft to excellence.

• Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Dropbox\Camera file will be mailed. Error: (System does not find the specified path. (0 x 80070003))

  This is the error message I get after several days of decline in dropbox, my Norton, saying that he was sure loading! I have read and re read most of what people have written, and I have no idea! I'm not a person irritable and can someone put in easy terms what should I do to solve this problem! I read try it who try and read that nothing works. Does anyone know if something works and can it tell me please. Also if someone from Microsoft is reading this why not have you solved this problem?

  Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Dropbox\Camera file will be mailed. Error: (System does not find the specified path. (0 x 80070003))

  Hello

  You did changes to the computer before the show?

  These problems occur because the folders or libraries that you are trying to back up or restore include a reparse point. Analytical points are similar to shortcuts Windows or Unix symbolic links. A point of analysis can be used to point to a file that is moved temporarily to a different drive.

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors
  http://support.Microsoft.com/kb/973455/en-us

  I hope this helps. Let us know if you have other problems with Windows in the future.

• Virtusa Tennis 4: Fatal error! Could not initialize the Games for Windows Live. This application will be closed.

  Original title: Virtusa Tennis 4

  Virtua Tennis 4 error message has

  "Fatal Error!"
  Could not initialize the Games for Windows Live. This application will be closed.

  Hi Ravikumar,

  Of Virtua Tennis are what version you try to work with?

  It seems that Virutal Tennis version is not compatible with Windows 8.1, you can check the Windows Compatibility Center.

  See also:

  
  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  However, uninstall the "games for Windows - LIVE redistributable Microsoft" and 'Microsoft Games for Windows Marketplace' and resettlement of http://www.xbox.com/en-US/Live/PC/DownloadClient allowed little such users mentioned by ' GeraldLuger answered December 30" provided article.»

  Virtua Tennis 4 - games for Windows LIVE
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-gaming/Virtua-Tennis-4-games-for-Windows-Live/81e86e55-6d8c-4703-B09E-190306110238

  Hope this information helps. Response with status so that we can help you.