Error: Format of Windows Movie Maker not taken in charge when sending slide show

Similar Questions

• Error message in Windows Movie Maker 2

  I use Windows XP and have the latest Service Pack.

  In any case, when I download a Youtube video and import it into Movie Maker, it works perfectly. Then I add the clips in the Timeline. I cut the sound. I then cut part of the video. Then when I try to save it to my desktop, it fails and I get an error message saying that I either:
  1 is missing source files (I'm not sure what this is.) I think they are clips, but I already have all the clips when I imported the video.)
  2. not having enough space (I have more than 1.3 GB of space on my hard drive. The film takes only 6 MB.)
  3. the backup location does not exist (My Desktop exists.)
  I already searched the site and got no response. I tried to contact someone who works for Microsoft, but I have to pay $50 (which is a RIP-OFF).
  Can someone help me?

  Apparently the .wmv files you have are corrupted somehow.

  And it is possible that your project is too complex for your system
  resources.

  What format are the videos in the how you downloaded the
  YouTube?

  Here is an article that deals with the error you receive:

  Movie Maker - problem resolution - "cannot record a movie.
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

• Windows Movie Maker, not be able to open or import .mswmm files

  MovieMaker for Windows Vista Edition Home Premium

  I did a movie with effects and audio and save the file. However, when I go to open the file, I can not and I have a msg which States:

  The file C:\Users\Yolanda\Videos\Yolanda's BDay 34th slide show. MSWMM cannot be imported because the codec required to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file.

  In computer science, I'm not notified. I need advice so that I can open and see all the hard work that was put into this project.

  Thank you.

  I did a movie with effects and audio and save the file. However, when I go to open the file, I can not and I have a msg which States:

  The file C:\Users\Yolanda\Videos\Yolanda's BDay 34th slide show. MSWMM cannot be imported because the codec required to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file.

  In computer science, I'm not notified. I need advice so that I can open and see all the hard work that was put into this project.

  Thank you.

  ===========================================================
  MSWMM is not a movie file... it's a project file
  This is only useful for re - edit in Movie Maker.

  If you double click left the MSWMM file... should be
  It can be opened in Movie Maker... If it's not...
  corrupted and starting over might be the solution.

  The following article is maybe worth a visit:

  Windows Vista-
  Work with projects in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/work-with-projects-in-Windows-Movie-Maker

  The following articles provide information about the edition
  (save) in a film format that will play in
  Windows Media Player and can be shared.

  Windows Vista-
  Publish a movie in
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista - Edition
  http://www.Papajohn.org/Vista-publishing.html

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows Movie Maker, not be able to import video

  Windows Movie Maker

  I have the Vista operating system.  I'm opening the camcorder videos in Windows Movie Maker, and I get the error message:

  The C:\Users\Marcia\Desktop\selz videos\Selz that DVD.wpl file cannot be imported because the codec required to play the file is not installed on your computer.

  What should I install to open these videos?

  I have the Vista operating system.  I'm opening the camcorder videos in Windows Movie Maker, and I get the error message:

  The C:\Users\Marcia\Desktop\selz videos\Selz that DVD.wpl file cannot be imported because the codec required to play the file is not installed on your computer.

  What should I install to open these videos?

  =============================
  The .wpl files are probably Windows Media
  Playlist of files... not real video files.

  Here is some info on the .wpl files:

  WPL file extension
  http://www.downloadatoz.com/file-extensions/wpl-file-extension.html

  You can find real video files... maybe
  in your videos folder?

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows Movie Maker, not able to post the video

  I have a problem with the publication in 23 minutes of video!

  I have the same problem with Windows Movie Maker with the same the same reasons. I check everything to make sure that the files are not corrupt or missing, I check that the destination folder has enough space, and make sure that the folder exists and still... IT DOES NOT PUBLISH! IT GETS 1/3 OF THE WAY AND ME GIVES ERROR! HELP PLZ!

  You may need to split the clip 23 min into smaller clips. Publish them separately. Then re-import them in wmm and see if she agrees to publish this time. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows Movie Maker, not able to burn the movie to a DVD

  Director of Windows & dvd creation

  DVD won't burn spent 71%

  DVD won't burn spent 71%

  1. is the format of your video clip supported by Windows?
  Here's the vdieo formats supported by Windows:
  Video files: .asf, .avi, .dvr-ms, .m1v, .mp2, .mp2v, .mpe, .mpeg, .mpg, .mpv2, .wm, and .wmv

  2. how long is the video clip? If it is too long, it would be more easy to use Movie Maker to split the clip into smaller clips, publish them, and then try to burn them in several DVDs. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows Movie Maker is stuck at 96% when posting!

  I made this video with a time of 21 minutes, but I have since found Director if crush I decided to divide it into parts. Then, I got the short pieces and 1 vote against and 15 minutes. They all seemed fine, but bow that I'm putting together and movie maker just gets stuck at 96%! I tried to delete the last part and it got stuck at 99%!

  The files are from the Sims2 and youtube, but some of them have been published on Sony Vegas.
  I've already unlocked all the filters and tried to save it as an AVI file, it still does not work.
  I could say it is too long or too complex, but it was beautiful when he was in 3 different parts: s
  Please help me!
  Thank you *.
  Clara

  If I understand... you have three. WMV video
  clips and you want to combine into one
  . WMV file.

  Format Factory free software has a Video Joiner
  option that will join files very quickly and can be
  worth a try.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Once installed, open Format Factory... to the left
  pane... Choose... Advanced / Video Joiner...
  On the left, click on the button Add file and import your video
  clips. Choose an output format and on the left, click OK.

  On the left, click on the Start button in the toolbar and your
  video files will be combined.

  Good luck...

• Windows Movie Maker 2.6 to crash when recording

  Hello.
  When I try to record a movie published in Movie Maker 2.6 using the "DV AVI PAL' economy mode, my WMM crashes.
  I use professional VISTA and I recorded successfully one more small WMM (high quality VIDEO) file without any problem of crash.
  I have a lot of disk space and memory.
  Why is this happening?
  Any help is greatly appreciated!

  Thank you.
  Italbrooko!

  Hello.
  When I try to record a movie published in Movie Maker 2.6 using the "DV AVI PAL' economy mode, my WMM crashes.
  I use professional VISTA and I recorded successfully one more small WMM (high quality VIDEO) file without any problem of crash.
  I have a lot of disk space and memory.
  Why is this happening?
  Any help is greatly appreciated!

  Thank you.
  Italbrooko!

  =========================================
  Three possible causes of the failure to save:

  (1) the incompatible source files... (eventually... MPG or MP3)
  Sometimes it is useful to disable the filters... Tools / Options /.
  Compatibility tab... Uncheck all the boxes / OK.

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  (2) files source corrupted... the only solution for this would be to
  Remove the source files of the project one at a time and
  try to save each time until the problem file is discovered.

  (3) project is too big or too complex for system resources.
  Create several small projects... Save as WMV.
  Then re - import WMV files collected / drag in the timeline
  and record the final movie.

  The following of the former article has some info.

  Movie Maker 2 - problem solving - "cannot record a movie.
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

• Error that says "WINDOWS INSTALLER are not AVAILABLE. SE WHEN WINDOWS INSTALL IS NOT PROPERLY INSTALLED. "Can anyone help?

  Computer is 2009 ASUS. Operating system is Windows 7. Recently, the problem occurred when you try to use Excel and Word 2007. I find the virus, found nothing.

  2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Substitute:

  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

  1. in the menu 'Start', click on ' execute:.»

  2. in the "Open" box, type "msiexec /unreg", and then press ENTER.

  3. in the menu 'Start', click 'run '.

  4. in the "Open" box, type "msiexec/regserver", and then press ENTER.

  If this is insufficient, the I would say to install the Windows Installer Cleanup utility and run that to remove the Java remains Setup files that can cause problems with your current installation.

  For more information, visit the below mentioned link:

  http://support.Microsoft.com/kb/290301

  ------------------------

  Click Start Orb, in the box, type search: Regedit.

  Highlight: HKEY_lOCAL_MACHINE/SYSTEM/CurrentControlSet/services/msiserver

  Verify that the SYSTEM account has full control. If it does not, add the SYSTEM account with full control.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

• Get the message "Input not taken in charge" when my computer starts. Can't get through.

  Original title: input not supported

  "Input not supported ' message arrives soon I turn on the machine as Windows xp and this message moves around my screen, he said." I'm not able to connect to the machine or to roll this message. May I know why this message is

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  Start the computer in safe mode and check if the same problem occurs:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  I suggest you try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.

• Windows Movie Maker error - interface has too many methods to fire events from

  I get this error when I try to import video into Windows Movie Maker.

  "D:\profile.cu\Desktop\Live\10_1_11 Outside\july 032. AVI could not be imported. "An interface has too many methods to fire events from.

  What it means?

  Hi Joe Frick,

  1. You receive a similar error message when you import .avi files in Windows movie maker?
  2. Are you able to import other types of files in Windows movie maker?
  3. Did you the latest changes on the computer?
  4. Where you import video into Windows movie maker?

  I suggest that you try to import other files in Windows movie maker avi video and also check if you import another file format in Windows movie maker.

   

  Formats supported by Windows Movie Maker in Windows XP file

  http://support.Microsoft.com/kb/308464

• Error message when opening Windows Movie Maker: Runtime Error! Program: C:\ProgramFile\MovieMaker\moviemk.exe this application has requested the execution in a very unusual way.

  Original title: error running with windows movie maker

  I have this problem every time now that I tried to use it.  I get this message below: Runtime Error! Program: C:\ProgramFile\MovieMaker\moviemk.exe this application has requested the execution in a very unusual way. what I would do. I hv windows vist 32 bit sp2 to the system. PL. help Sudhir

  Hello

  • He previously worked? If so, remember you make changes to your computer before this problem?

  Method 1:

  Start your computer in a clean boot, and then check: How to troubleshoot a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.

  Method 2:

  Try to make an auditor of the system files on your computer and search for errors on the disc: How to use the tool File Checker system to troubleshoot missing or corrupted system files on Windows Vista or Windows 7 http://support.microsoft.com/kb/929833

• Windows Movie Maker-hardware error?

  While trying to save/burn a movie on Windows Movie Maker project, I worked, I got the following error message:

  "Windows Movie Maker can not be used because the required audio hardware is not found on your computer."

  Please help, its a long time that I've used WMM, but I used many times before and would be eaten: lose my project, thank you.

  It could be a codec/filter disabled, or inconsistent. In Movie Maker-> tools-> Options-> tab compatibility-> filters, see if your audio filters are checked (all others must be verified), if you haven't put the brakes on their topic.  If all are already checked, click on the "Restore all defaults" button. Other filters will be disabled, you may still need those disabled to run other programs installed them. Enable disabled filter a while then check that filter out the origin of the problem.

  If this does not work, it may be more of a need to get an extra codec rather than switch off. You can use the encoded Xvid or Divx files you need codecs. Make a search for K-Lite, DivX and XviD codecs and install them.

  I hope I could help

• I downloaded my personal movie dvd to my documents, but when I play on their return, that I get them is divided into sections and some say I need a codec it is when I try to import media into windows movie maker.

  Does anyone have any suggestions? It keeps giving me an arror code saying something codec. What shoul I do... help

  Hi napoleonfoo,

  Did you follow the steps provided by John Inzer?

  To better understand the issue, we need the following information:

  (a) what is the exact error that you receive when you import video into windows movie maker?

  (b) what is the file format of the video you are trying to import?

  (c) means the video sharing with each drive that you use or simply with a particular player?

  To clarify, you try to install a program (or download the program)?  What program are you trying to install? You get a specific error message?

  See the link below for the file format supported.

  Import video, images and audio in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-files-pictures-and-audio-into-Windows-Movie-Maker

  You can search online for the codec or convert the file into a format that windows movie maker can understand.

  Note: Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, see the link below:

  Solve problems with importing files in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-importing-files-into-Windows-Movie-Maker

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Movie Maker-film plays with no audio

  Director of Windows

  Why, when I try to make a movie in windows movie maker audio work does not work when I press play?

  Why, when I try to make a movie in windows movie maker, audio
  doesn't work when I press play?
  ?????????????????????????????????????????????????????????????????
  ?????????????????????????????????????????????????????????????

  ==============================================
  Maybe the source files you use are not
  fully compatible with Movie Maker.

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wav, wmv

  Also, it may be worth trying to go to... Tools /.
  Options / compatibility... tab and uncheck all
  the filters.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.