Windows Movie Maker-hardware error?

Similar Questions

• Impossible to import PowerPoint file in Windows Movie Maker - codec error

  I am tryping to import a PowerPoint file into Windows Movie Maker to burn it to a DVD, but I get a codec error

  Cannot import the file C:\Users\Karen\Documents\2009 Fundraiser\Yellow Rose 2009.ppt MWP because the necessary codec to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file.

  How can I find this codec and install it?

  Blond highlights Hello,

  Thanks for posting in the Microsoft answers Forum.  Usually, when you try to play a video in Media Player if you do not have the right codec Media Player will automatically download and install the correct codec if it is available.  Since this is a Power Point presentation has video embedded in it?  If so, try to play the video file outside the Power Point presentation and Media Player will go out and get the correct codec if you are connected to the internet.  Here is an article from the Microsoft Knowledge base that explains Media player codecs and configuration to automatically download:

  http://support.Microsoft.com/kb/926373

  I hope this information is useful.

  Thank you

  Jack

  Jack
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message when opening Windows Movie Maker: Runtime Error! Program: C:\ProgramFile\MovieMaker\moviemk.exe this application has requested the execution in a very unusual way.

  Original title: error running with windows movie maker

  I have this problem every time now that I tried to use it.  I get this message below: Runtime Error! Program: C:\ProgramFile\MovieMaker\moviemk.exe this application has requested the execution in a very unusual way. what I would do. I hv windows vist 32 bit sp2 to the system. PL. help Sudhir

  Hello

  • He previously worked? If so, remember you make changes to your computer before this problem?

  Method 1:

  Start your computer in a clean boot, and then check: How to troubleshoot a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.

  Method 2:

  Try to make an auditor of the system files on your computer and search for errors on the disc: How to use the tool File Checker system to troubleshoot missing or corrupted system files on Windows Vista or Windows 7 http://support.microsoft.com/kb/929833

• Windows Movie Maker Codec error?

  Hello
  recently, I switched from windows xp to windows vista. I got nothing else problems with windows movie maker now. I downloaded 3 different clips from my digital camera to edit, and I get this message.

  "The C:\Users\Public\Pictures\Kodak Pictures\3-1-2010\100_0064.mov file cannot be imported because the codec required to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file. »

  I downloaded Windows Movie maker again and updated as well as all my products and windows of windows media player.
  I also downloaded the download from the windows codec supports the download page, it downloaded then said that it was not compatible with my software.
  (I looked upwards of codec for windows vista & downloaded. Then I get a notice that its only for windows 2007 and windows xp, but it said on the site windows vista!)
  also, I rebooted and waited 72 hours without change.
  I downloaded my software of kodiak and the fotage plays perfectly there but not anywhere else!

  I read some other reviews and they have not helped either, im so frustrated!
  Please help as soon as you can!

  Hello
  recently, I switched from windows xp to windows vista. I got nothing else problems with windows movie maker now. I downloaded 3 different clips from my digital camera to edit, and I get this message.

  "The C:\Users\Public\Pictures\Kodak Pictures\3-1-2010\100_0064.mov file cannot be imported because the codec required to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file. »

  I downloaded Windows Movie maker again and updated as well as all my products and windows of windows media player.
  I also downloaded the download from the windows codec supports the download page, it downloaded then said that it was not compatible with my software.
  (I looked upwards of codec for windows vista & downloaded. Then I get a notice that its only for windows 2007 and windows xp, but it said on the site windows vista!)
  also, I rebooted and waited 72 hours without change.
  I downloaded my software of kodiak and the fotage plays perfectly there but not anywhere else!

  I read some other reviews and they have not helped either, im so frustrated!
  Please help as soon as you can!

  ========================================
  MOV files are not compatible with Movie Maker.

  Might be worth trying to convert .mov files
  format .wmv before import into Movie Maker.

  The following freeware can convert:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you can uncheck
  all the boxes on the last screen)

  After downloading and installing Format Factory...
  Open the program and choose an output folder...
  (this is where you will find your files when they are
  converted)

  Drag and drop your clips video .mov on the
  main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows Movie Maker publication error ANSWER QUICKLY please. EXTREMELY LIMITED TIME.

  When I tried to publish my movie, I got this:
  The following problem occurred in your film: (is 0 x 80131620)
  I NEED THIS TO BE FIXED SO I CAN PUBLISH IT FOR MY STUPID PROJECT. PLEASE SOMEONE HELP AND ME WHAT TO DO.
  The video is 9 minutes and 32 seconds. It is updated on a computer updated version. Just if you need nothing of all this.

  Hi ClaudeFaustus

  
  You can refer to the link below and check if this helps-
  http://windowslivehelp.com/thread.aspx?ThreadId=158ce5fb-daf7-47D8-874f-7214e49ed07d

   

  In dealing with the problem while using Windows Live Moviemaker I recommend you to check specific to Microsoft Windows Live resources. Please visit the links below to find a community that will provide the support that ask you in the right direction for applications Windows Live-

  http://windowslivehelp.com/forums.aspx?ForumID=f5dad528-638d-4AD1-BE14-31751f8af98f

  I hope this helps.

• When you use Window Movie Maker the rundll32 error message

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem
  • Windows Movie maker
  • Error message and the program closes
  • Rundll32

  Hi watusi.

  Your question does contain all the required information necessary for us to help you. Please include more information to continue troubleshooting as a result.

  For more information, see How to ask a question .

  During this time, perform a scan of the checker (SFC) system files on your computer and check to see if that fixes the problem.

  Learn How to use the tool File Checker system to resolve missing or corrupted on Windows Vista or Windows 7 system files

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Window Movie Maker has encountered a problem and needs to close

  When I open the window Movie Maker an error massage pops up saying. Window movie maker has encountered a problem and needs to close, how can I solve this problem

  Hi ottomatic,.

  Follow the steps listed in the link below: error message when you try to start Windows Movie Maker in Windows Vista: "Movie Maker has stopped working": http://support.microsoft.com/kb/923122

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Using Windows Movie Maker on the error message XP__ not indexed _ bad quality

  I use Windows Movie Maker XP (version 2.1?).  I've converted and imported a lot of videos.  I have a group of short videos recorded the same day.  I (with free STROKE) converted to AVI and they play with no audio and several play accelerated.  I've then diverted to ASF and some of them imported correctly.  Most of them gave me an error message that they were not indexed.  I downloaded several things to remedy this from online forums: I uninstalled K-Lite pack codec, Expression Encoder 4, WinDVR AVI, DivFix, lame and a number of things.  That's a family movie, I spent a lot of time on it.  If anyone can help with my old hardware and software configuration at this point I'd appreciate it.  The original film seems to be of much better quality than what I am able to import.  Thank you!

  The most reliable video format for Movie Maker is. WMV.

  No guarantee... but the following freeware converter
  may be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  You will need to unzip the file... or you could just drag
  the Setup.exe from the file out of the folder and drop it on your
  desktop and install from there.

  Once installed... Open Sothink and go to... Add the files button...
  Find and select the clips you want to convert.

  Next... in the encoding settings... Choose... Video credits.
  WMV - Windows Media Video (*.wmv).

  Choose an output folder and on the left, click on the button convert.

  You can experiment with other settings later but
  This should help you get started.

  Good luck...

• Window Movie Maker will not import a mp3 file get that a C: {file location} .mp3 error could not be imported

  OP: Window Movie Maker will not import an mp3 file. Why?

  I tried to imort a song from my music file which is in mp3 format, but the program won't. She won't tell me why, it just says: "C: {file location} .mp3 cannot be imported."  I imported 2 other songs that are the same exact format. Why is it cant import the file?

  Hello spardigus,

  1 - is the full error you get when you try to import the file?

  Some of the Mp3 files can be compressed in various formats. I suggest that you search information below and check out them if you are able to import the files.

  It might be possible that the file may be corrupted and is not readable by Movie Maker. I suggest that you copy the file to a different location on your computer and you are trying to import.

  Also check the size of the file. If it shows 0 bytes, there are good chances that the file may be damaged.

  I suggest that you try to convert this file to avi format using an Audio Converter. There are several converters which helps you convert the file in the required format. Convert the file and try to import.

  You can use your favorite search engine to find the program that will help convert the files.

  DISCLAIMER OF THIRD PARTY SOFTWARE:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Movie Maker - error message not indexed

  When I try to import a video to Windows Movie Maker, I get the following error message: the file C:\My Documents\video\VID00023.wmv is not indexed and cannot be imported.

  You can use the windows re media file editor - index wmv file.  It is installed as part of the windows media encoder.

• Windows Movie Maker error - interface has too many methods to fire events from

  I get this error when I try to import video into Windows Movie Maker.

  "D:\profile.cu\Desktop\Live\10_1_11 Outside\july 032. AVI could not be imported. "An interface has too many methods to fire events from.

  What it means?

  Hi Joe Frick,

  1. You receive a similar error message when you import .avi files in Windows movie maker?
  2. Are you able to import other types of files in Windows movie maker?
  3. Did you the latest changes on the computer?
  4. Where you import video into Windows movie maker?

  I suggest that you try to import other files in Windows movie maker avi video and also check if you import another file format in Windows movie maker.

   

  Formats supported by Windows Movie Maker in Windows XP file

  http://support.Microsoft.com/kb/308464

• Windows Movie Maker cannot be used because the required audio hardware cannot be found on your computer.

  Windows Movie Maker cannot be used because the required audio hardware cannot be found on your computer.

  Help, please.

  original title: MM not working,.

  Laughing out loud!

  I found the awnser!
  It was two things,
  I have a dell and in some sort when I returned to XP SoundMAX Digital 7 Starter was deleted,.
  Then I got the thing plugged into the wrong entrance!

• Windows Movie Maker 6.0 error during recording: check if the original sources are still available, the saving location is available and if there is enough disk space

  Original title: Windows Movie Maker 6.0 Save Bug?

  Something's weird with Windows Movie Maker...

  It cannot record movies, I create somehow.

  Immediamente when it starts to save, it gives an error signal: check if the original sources are always available (and yet, they all), there is no such thing as the save location (of course it is!) and if there is enough disk space (a lot of). Still, it will not save. How can this be possible?

  I use an mp3 file (pendulum - watercolor) and have a lot of footage, often used with effects. They are 1280 x 1024 and a .avi file. Everything should work fine, but still does not work. Help me!

  Something's weird with Windows Movie Maker...

  It cannot record movies, I create somehow.

  Immediamente when it starts to save, it gives an error signal: check if the original sources are always available (and yet, they all), there is no such thing as the save location (of course it is!) and if there is enough disk space (a lot of). Still, it will not save. How can this be possible?

  I use an mp3 file (pendulum - watercolor) and have a lot of footage, often used with effects. They are 1280 x 1024 and a .avi file. Everything should work fine, but still does not work. Help me!

  ============================
  It is sometimes possible to publish / save in the
  Even if the DV - AVI format. WMV fails. If you are
  running Vista Movie Maker 6.see the following:

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  WIndows Vista Movie Maker 6
  The following chart shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg

  And sometimes unchecking that will enable all filters
  registration in progress...

  Reach... Tools / Options / compatibility... tab and
  Uncheck all filters / OK.

  The error that you received can be caused by the following:

  (1) source incompatible or damaged files (photos,
  video clips, audio clips).

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  (2) the project is too big or too complex for your system
  resources. Made video is time CPU and
  can sometimes cause blackouts.

  The following items may be worth a visit:

  Movie Maker - problem resolution - "cannot record a movie.
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

  Windows Movie Maker error
  Cannot complete the Save Movie Wizard
  http://moviemakererror.blogspot.com/

• Error: Format of Windows Movie Maker not taken in charge when sending slide show

  original title: need help in windows movie maker... *...

  I use Windows Vista Home Premium and windows 7 on this computer. I am confused about how to view the slide show of pictures of classic cars, I took at a car show last weekend. I tried to put the slideshow on my external account and another external account, but got an error message in the sense of Windows Movie Maker format is not accepted. I was told that the file I have must be in WMV format. I tried a converter, but it did not have the required conversion. I can put slidshows together but how to get the updates and other, I'm kind of a total newbie to know what to do. Is there someone out there who can help me try to get this converted so I can view the slide show in the two external accounts I want to use? I don't know if it is acceptable to say what two external accounts I need, because sometimes forums do not allow the names of these accounts unrelated to the issue at hand.

  Any help is greatly appreciated and welcomed. I have the slide show minimized in my taskbar, so I will not lose her, but I'd love to get help as soon as possible. I'll check in here to see what kind of assistance is coming to meet me.

  I use Windows Vista Home Premium and windows 7 on this computer. I am confused about how to view the slide show of pictures of classic cars, I took at a car show last weekend. I tried to put the slideshow on my external account and another external account, but got an error message in the sense of Windows Movie Maker format is not accepted. I was told that the file I have must be in WMV format. I tried a converter, but it did not have the required conversion. I can put slidshows together but how to get the updates and other, I'm kind of a total newbie to know what to do. Is there someone out there who can help me try to get this converted so I can view the slide show in the two external accounts I want to use? I don't know if it is acceptable to say what two external accounts I need, because sometimes forums do not allow the names of these accounts unrelated to the issue at hand.

  Any help is greatly appreciated and welcomed. I have the slide show minimized in my taskbar, so I will not lose her, but I'd love to get help as soon as possible. I'll check in here to see what kind of assistance is coming to meet me.

  =========================================
  It seems that you saved the file (mswmm or wlmp project
  Depending on your version of Movie Maker) that is
  useful for a re-release in Movie Maker and cannot be read
  by others.

  Try to save your project in the. WMV Movie format...

  If you use Vista Movie Maker 6... try the following:

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista - Edition
  http://www.Papajohn.org/Vista-publishing.html

  If you run Windows Live Movie Maker... try the following:

  How to save the project in Windows Live Movie Maker to WMV Format
  http://www.YouTube.com/watch?v=ZyqZm5MBc7o

• Edition file Windows Movie Maker as my Windows DVD Maker solution get an error unspecified 1.6% each time?

  I can't publish my holiday video (multiple files linked together by me in Windows Movie Maker with title screens before each clip and music) as Windows DVD Maker claims an unspecified error of 1.6% each time. I changed the output directory, but that did not help. Also, when in Movie Maker / a lot of DVD Maker icon stream through the bar near the clock, some white with small print out and some red with "Ffv", which I can only think fact obstacle to the whole process!

  I was wondering if I could download it my Windows Movie Maker in another free DVD file, making the software and if you have any suggestions?
  Thank you

  Last reply first... No, are the Movie Maker project files
  not compatible with other video editing software.

  You are running Windows or Vista Movie Maker 6
  Live Movie Maker?

  It is possible that your project is too complex for
  your system resources but it is more than likely
  some of your files source (Photos, video Clips,
  Audio clips) are not fully compatible with Windows
  Movie Maker.

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  Conversion to formats compatible before importing
  in Movie Maker may be the solution.

  There are many converters available on the net... some
  free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster download)
  (the file you want to download is: > FFSetup290.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag > FFSetup290.exe< out="" of="" the="">
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...