Error FTP 1207

Similar Questions

• I use Dreamweaver CS4, but when I try to start I get an error code 150:30 and then an error Ftp after Ok is pressed on the first error.  How to solve the problem?

  How to fix error 150:30 with error FTP following the closure of the window for the first mistake?

  Mac?

  Really pay attention to the Important: Articles here:

  Error "Licensing has stopped working". Mac OS

• Error FTP WRT54GH 425

  I've been running a FTP FileZilla Server for more than 2 years now. When I arrived in FTPs was actually the first time I had to port forwarding. External router forward 21 TCP 21 on the LAN, everything was good, FTP works. A few days ago the old router died, and to get a new one, I went for a WRT54GH. When I put in place I have also made sure to forward port 21 to the machine. Now, I try to access the FTP and after a long wait, I get an error 425 unable to open data connection.

  I double checked and checked - is not only the port properly transmitted, but FileZilla actually gets the request and the two negotiate a bit. Since I change anything in the FTP and FTP still works fine on the LAN IPs I will of course blame the router!

  What should I do and how can I solve this problem?

  I do usually not reproduced but I fixed it and I leave this info here for future reference to others:

  It seems that - at least with the first version of the firmware - router alters network packets if she sees they are sent on port 21. He changes IPs their LAN PASV commands, which connecting clients cannot work with. In addition it seems that some other obscure port opening the issue once the connection is established.

  In order to circumvent the arbitrary conversion of NAT on the router, you must forward external port 21 to some other internal ports, for example 12345. The FTP server on the computer must be configured to listen on this port. This will get around the NAT issue.

  For the second question, the server PASV mode must be given a range of fixed ports, for example 65000 to 65100, and in turn these ports should be sent to the FTP hosting machine in the settings of the router.

  -Important set of notes on one or more ports forward!

  Ports passed before changing the address LAN IP (e.g. 192.168.1.x to 192.168.0.x) range MUST be disabled, saved and re-checked, otherwise the rules no longer works! In addition, if the SPI Firewall settings are changed in any way, all ports beaches (beaches, ports not only) MUST be disabled, saved and checked in order to work! Yet another note, DMZ seems to have similar problems. Not knowing this topic can lead to unexpected with the implementation results not only the FTP, but also other applications that rely on shipping, because the router will claim a set of settings, but do not use it.

• Error FTP 425 cannot open the data on the computers of some but not all connection

  I have an Access 2010 database that has a button that runs a VBA module.  One of the things in the module is a Shell Call running one. Bat file which is an FTP server.

  When I open the application (stored on a server, not my computer) and click on the button that makes returns FTP, FTP, "425 can't open data connection".  If I open the same instance of the application (stored on a server) on another computer the FTP transfers the file fine, no errors.

  This test clearly shows the problem on my computer, it is not the average program is written the Shell Script or the server I'm files are coming or going or the modem communication or any other end sits only not on my desk.

  What I'm trying to find, it's what registry entry, OS or the communication on my computer setting may cause the error of connection on a machine and not another.

  Thank you in advance for any help you can provide.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Error FTP Abort operation found no service

  I m using Acer aspire 5755 computer laptop with Windows 8. I have problem with Bluetooth file transfer operation.
  I m in the files sent via Bluetooth from my computer laptop to another device, but unable to receive the file from the device to my laptop.
  whenever I try to send files from the device to my laptop, I find the error message "Operation FTP Abort found no service."
  I tried many things, like updated drivers, although all are up-to-date, I paired, devices by not of these methods worked for me.
  Kindly help.
  Thank you!

  Hello master,

  I had the same problem for a while, whenever I tried to send files from my computer to my Tablet it would appear with the same error message

  "Operation FTP abandon any service not found."

  To solve this problem and transfer files successfully:

  1. go to your desktop, on the bottom right there is a small triangle pointing up, click it, this will show a panel with various options.

  2. right click on the Bluetooth icon and select 'Receive a file' and try to send it again.

  I hope this helps.

  AV

• WebFusion error FTP & host

  My problem:

  I'm launching my first already created Web site in DreamWeaver, DreamWeaver FTP on my Webfusion shared linux server host account. I'm unable to connect to the server from Webfusion.  I don't know if the problem is:

  1. with putting me in the information incorrectly in the Site definition boxes, or
  2. (as Webfusion suggest) a DreamWeaver problem or
     
  3. a problem of Webfusion.
     

  I would appreciate help from any Member who uses DreamWeaver and Webfusion about how to enter my information in the fields of Site definition and how to connect.

  What I tried to do:

  I followed the advice of my "Adobe DreamWeaver CS4 classroom in a book" where (not very well), he explains how to configure a remote FTP site and I have an error message: "an FTP error occurred - cannot connect to host.»»»  The remote host cannot be found. Try to connect to the host server (by using the Test button) also causes a problem in my personal configuration file, I managed to adjust with David Powers 'post dated June 4, 2002, http://forums.adobe.com/thread/417116?tstart=0#cache.

  I searched the help Webfusion support site to fill in the DreamWeaver Site definition box remote Info section, but their article appear to contradict the advice of Adobe.  I also talked to the aid of Webfusion Office. The guy who I spoke gave me help (as he used DreamWeaver himself), but he says that should not help me on this problem because the company did not help on the problems of third-party software.  He don't have reset my password because he thought it could be a problem.  The reset did not help.

  Details:

  I hesitate to put the information I have in my remote info boxes in this post that I don't understand really (except the username and the password) how is personal information for me and therefore should not be posted here.

  Any help would be welcome, as I am really stuck.

  Gill

  Hello

  I am pleased to learn that you have now solved your FTP problems, just for re cap for all customers of Webfusion using Dreamweaver.

  -Check that no software anti antivirus or firewall is not blocking or stopping you to connect to our hosting server.

  Dreamweaver settings

  Site definition

  Access: FTP

  FTP host: 94.136.40.100

  Host Directory: (leave blank or enter public_html)

  Login: (sent in the welcome email)[email protected]

  Password: (sent in the welcome email)

  All other options should be disabled.

  If you want to test only the work of ftp connection you can always do this by using a client such as File zilla FTP.

  How can I download my Web site using FTP?

  http://www.Webfusion.co.UK/support/answers/how-can-i-upload-my-website-aide-FTP-114 /.

• Error FTP by putting the files to the remote site

  Hello. I've never posted here before I really hope that someone can help you.
  
  I've been using dreamweaver for some time now, but... I just changed ISP and bought a new modem, now I can not put my files I opened ports in the modem and turned off firewall but still don't work I just get the error "Unable to connect to host" when he said it could be 4 else, Ive tried all always the same.
  
  When I hit the test button in the configuration of the site its fine but just used for real work. Oh and I managed to get half of my site to the top with the new equipment and ISP im thinking it could be something local.
  
  any help would be great.
  
  PS: if I create a "network place" who are my ftp site it opens too and im using vista...

  OK I have just re-creation of the site in dreamweaver, all working ok now with firewalls on. I hope it works for you too jk31.

• Tried a million times. Error FTP DW8

  I tried searching the forums and several posts were made on this topic, but few answers have been posted.
  Please help me with the following:
  Feature of DW 8 FTP won't connect on that spesific server. I tried other programs FTP (Core FTP and GoLive) and it works fine. DW 8 is also able to connect to another server, to which I have access but not this one.
  
  Here are my current settings:
  Access: FTP
  FTP host: ftp.mydomain.com
  Host Directory: / var/www/html /.
  Login: [email protected]
  Password: correctpassword
  
  Use passive FTP mode: Yes
  
  I get the error message: "...". your login or password are incorrect... »
  
  This is one of those cases where there may be a combination of problems, but someone has an idea?
  
  Help, please! Thanks :)

  Jeezez
  Strange bug?
  I have always used the connection 'test' button in the FTP settings window and received an error message EVERY time... after HOURS of trying, telephone calls and the search of the forums I just dropped. Now just for fun I tried to connect my server in the "files" tab HERE! -I'm in? ----
  Solution: Do not trust the button 'test' If you are having problems. If you know that you have the right settings just assumed that everything is OK and connect as usual in the files tab :)

  Should I report this bug? Probably, but I had a deadline yesterday and I'm out of time... Sorry!

• Error FTP jython in ODI

  Hi all
  
  I use jython code FTP to a server. When I hard code the username and password it works fine, but when I try to read the user name and password in a file, it does not, I get the following error:
  
  org.apache.bsf.BSFException: exception of Jython: Traceback (innermost last):
  
  "< String >" file, line 3, in there?
  
  File ' C:\ODI\oracledi\bin\... \lib\scripting\Lib\snpsftp.py ", line 51, in __init__
  
  File ' C:\ODI\oracledi\bin\... \lib\scripting\Lib\snpsftp.py ', line 79, in connection
  
  File ' C:\ODI\oracledi\bin\... \lib\scripting\Lib\ftplib.py ', line 318, in connection
  
  File ' C:\ODI\oracledi\bin\... \lib\scripting\Lib\ftplib.py ', line 229, in sendcmd
  
  File ' C:\ODI\oracledi\bin\... \lib\scripting\Lib\ftplib.py ', line 202, in getresp
  
  error_perm: 530 Login Failed for User user_name
  
  
  
  at org.apache.bsf.engines.jython.JythonEngine.exec (unknown Source)
  
  at com.sunopsis.dwg.codeinterpretor.k.a (k.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt (SnpSessTaskSqlS.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep (SnpSessStep.java)
  
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession (SnpSession.java)
  
  at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand (DwgCommandSession.java)
  
  at com.sunopsis.dwg.cmd.DwgCommandBase.execute (DwgCommandBase.java)
  
  at com.sunopsis.dwg.cmd.e.i (e.java)
  
  at com.sunopsis.dwg.cmd.g.y (g.java)
  
  at com.sunopsis.dwg.cmd.e.run (e.java)
  
  at java.lang.Thread.run (unknown Source)
  
  
  
  Here is my source code:
  
  import snpsftp
  FSRC = open ('C:\ODI\DebtorInfo_Properties2.txt', 'r')
  FTP = snpsftp.SnpsFTP (fsrc.readline (), fsrc.readline (), fsrc.readline ())
  FTP.setMode ('ASCII')
  FTP.mput (fsrc.readline (), 'DEBITEUR.dat', fsrc.readline ())
  FTP.Close)
  FSRC. Close()
  
  My file structure looks like this:
  
  100.200.3.45
  username
  password
  C:\ODI\oracledi\demo\file
  / ftpfolder/share /.
  
  I tried to read the file and the file to check the write data is correct and it is. If I hard code the username and password, it works very well for example
  
  import snpsftp
  FSRC = open ('C:\ODI\DebtorInfo_Properties2.txt', 'r')
  FTP = snpsftp.SnpsFTP ('100.200.3.45', 'username', 'password')
  FTP.mput ('C:\ODI\oracledi\demo\file', 'DEBITEUR.dat','/ftpfolder/share/')
  FTP.Close)
  FSRC. Close()
  
  Any help on this would be much appreciated. I've been struggling with this for 2 days. IM new to ODI so any help would be grateful
  
  Thank you

  One of the best ways to debug jython code is to use printing statemnent.
  I suggest that you change the code to something like:

  import snpsftp
  FSRC = open ('C:\ODI\DebtorInfo_Properties2.txt', 'r')
  ftpserver = FSRC. ReadLine()
  username = FSRC. ReadLine()
  Password = FSRC. ReadLine()
  Print "ftpserver '%s'" % ftpserver
  print '' %s' username' %le username
  print the password "password '%s'" %
  FTP = snpsftp.SnpsFTP (ftpserver, username, password)
  FTP.setMode ('ASCII')
  FTP.mput (fsrc.readline (), 'DEBITEUR.dat', fsrc.readline ())
  FTP.Close)
  FSRC. Close()

  Run it in an agent, and you feel that statements in the agent log. You may need strip() what you read from the file.

• FTP error. Access denied. The file does not exist (only on the roots)?

  Having a strange problem.

  I just installed CS 5.5 and got one of my sites all over the place. I can connect to my remote server very well and download to any directory other than the root?

  If I do, then I get this error (see below). This happens only when I try and put the files at the root, don't know why. I tried all the little things like:

  -liability of the rocker

  -site to redefine

  .....

  I can use any other FTP program and I can not put the files in the ROOT, so it's just a thing of dreamweaver 5.5. I also tried my Dreamweaver CS3 on my old mac and it works like a charm!

  Any suggestions?

  Thank you!

  Started the: 18/05/11 13:57

  index2.php - error - FTP is an error - can not put index2.php.  Access denied.  The file exists may not, or there could be a permission problem.   Make sure you have permission on the server and the server is properly configured.

  Activity of the incomplete file. 1 file (s) or folder (s) have not been filled.

  Files with errors: 1
  index2.php

  Finished: 05/18/11-13:57

  The FIXED.

  In looking at the FTP log, he's in trouble with a locked file STATSHISTORY.

  So, I just deleted

• FTP error access denied permission issue permission to the server folder may not exist

  I've been using mx2004 then passed to cs3 and errors of publication I upgraded to cs4 thinking that might be the problem.

  I have 2 separate sites with 2 separate logins/passwords ftp.

  Only on 1 of the sites (including one with php and a site of big file that my provider has told me) I can't 'put' publish my site.

  My provider says that has nothing to do with their side.

  When I try and download the KB on the web range from 1 KB to 0kb and wipe the info.

  Each week, I use to update one of my sites.

  I added to the server a coral share Photo Album 2 weeks.

  That's when I could not been / publish my info up-to-date on my pages. But only on 1 site. The other with different site

  login/password allows me to change/to update the pages and put / post them.  It is the site of the coraldraw on.

  I took it off the coast of thinking maybe that was the issue...

  my ftp access is correct.

  my tests of connections to the sites is good.

  When turning on the remote server, it gives the following error:

  THE ERROR I GET:

  Start date: 17/07/2009 19:05

  Connected to "the name of my company."

  testzz.HTML - error - FTP is an error - can not put testzz.html. Access denied.

  The file exists may not, or there could be a permission problem.  Make sure that you have the appropriate permissions

  the server and the server is properly confirgured.

  Activity of the incomplete file. 1 file (s) or folder (s) have not been filled.

  Files with errors: 1

  testzz.html

  Completed the: 17/07/2009 19:05

  When I go to the remote site, the name of the file is showing but no content. zero KB

  I'm working on a pc. Windows xp

  I deleted the files, folders and all the ftp commands. I started on and also updated cs4.

  I removed the web album of corel draw.

  I upgraded to IE 8

  My provider has done a test page.html. I could see with 6kb. When I access the page and put some info on this subject and then put/post it goes to a blank page with 0 kb.

  Help, please... Thank you!

  Have you tried to use a distinct and 3rd party FTP client? If you can successfully connect and download to aid what he would suggest process FTP of Dreamweaver is messed up. And unfortunately, this is not surprising as it may seem, it is a part of Dreamweaver, I can meet quite regularly problems with. You can try to play with the site settings by using the Advanced Options tab, which will provide you with some additional settings for the FTP and see if that helps. Otherwise, you will have to just work around it with another FTP client.

• FTP errors

  
  Converted from a public Service of DW site. Do not use one of the conversion options, just copied HTML, js, and image files into a new directory and made some changes. At ISP take off the front page of site extensions to use the FTP option in dreamweaver. Created in the remote site mgmt, exectuted test options and connected. Tried to download files and got the following error:
  Started the: 22/04/2006-16:40
  
  menu - base.html - error - FTP is an error - can not put the menu - base.html. Access denied. The file exists may not, or there could be a permission problem.
  
  Activity of the incomplete file. 1 file (s) or folder (s) have not been filled.
  
  Files with errors: 1
  menu - base.html
  
  End: 22/04/2006-16:40
  I spoke with the ISP that says that nothing is wrong...
  I noticed in the forum, others had similar problems, but I do not see the resolution. I am new to DW and FTP and would appreciate any help.
  Thank you...
  

  The permissions on the host have been implemented by mistake... Notices received by ISPS that the permissions have been changed and it worked fine. Thanks for all help

• Error message during the download of dreamweaver for Business Catalyst Server model

  I have created several models of Dreamweaver and I get an error message when I try to upload to the server of business catalyst. I created a very simple model with the basis for this code and it will not download.

  I use Dreamweaver CC 2015.

  Here is the error message.

  Path is: /Templates/template-mar9-basic.dwt
  Models: model-mar9 - basic.dwt - error - FTP an error occurred - cannot put the model mar9 - basic.dwt. Access denied. The file exists may not, or there could be a permission problem. Make sure you have permission on the server and the server is properly configured.

  Activity of the incomplete file. 1 file (s) or folder (s) have not been filled.
  Files with errors: 1
  Models: model-mar9 - basic.dwt

  Business catalyst support told me to contact the support of Dreamweaver.

  You close DW & restart your computer yet?

  Nancy O.

• error message on model dreamweaver download

  I get an error message when I try to download a template from dreamweaver to the Server Business Catalyst.

  I put in the {tag_pagecontent} tag. I tried a lot of different models and stripped to the bare bones, it will not download. It doesn't seem to be a problem with a file. I copied from another site for win me time on this site, may be that is the question.

  BC support told me to contact dreamweaver. I think this is a server error not a dreamweaver error. I use Dreamweaver cc 2015.  Any suggestions?

  Error message:

  On the road: 2016-03-09 06:45

  Path is: /Templates/template-mar9-basic.dwt
  Models: model-mar9 - basic.dwt - error - FTP an error occurred - cannot put the model mar9 - basic.dwt. Access denied. The file exists may not, or there could be a permission problem. Make sure you have permission on the server and the server is properly configured.

  Activity of the incomplete file. 1 file (s) or folder (s) have not been filled.
  Files with errors: 1
  Models: model-mar9 - basic.dwt

  In the settings of your site in Dreamweaver to add EU at the end of your username.

  

• Error message: internal data error

  Dreamweaver CS5 has worked perfectly until this morning, when I get the error message: error FTP year, cannot bind to the host. Has encountered an internal data error. What is going on?

  One who suggested I have Symantec's Norton to uninstall and reinstall worked like a charm. Thank you!