Error FTP by putting the files to the remote site

Similar Questions

• ORA-19846: cannot read the header of the data file of the remote site 21

  Hello

  I have a situation or I can say a scenario. It is purely for testing base. Database is on 12.1.0.1 on a Linux box using ASM (OMF).

  Standby is created on another machine with the same platform and who also uses ASM (OMF) and is in phase with the primary. Now, suppose I have create a PDB file on the primary of the SEED and it is created successfully.

  After that is a couple of log, do it again passes to the waiting, but MRP fails because of naming conventions. Agree with that! Now, on the primary, I remove the newly created PDB (coward the PDB newly created). Once again a couple of switches of newspapers which is passed on to the wait. Of course, the wait is always out of sync.

  Now, how to get back my watch in sync with the primary? I can't roll method until the required data (new PDB) file does not exist on the main site as well. I get the following error:

  RMAN > recover database service prim noredo using backupset compressed;

  To go back to November 8, 15

  using the control file of the target instead of recovery catalog database

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 70 = device = DISK stby type instance

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the command recover at the 18:55:32 08/11/2015

  ORA-19846: cannot read the header of the data file of the remote site 21

  The clues on how to I go ahead? Of course, recreating the eve is an option as its only based on test, but I don't want recreation.

  Thank you.

  I tried like below:

  1 a incremental backup of the primary of the CNS where off the eve also taken primary backup controlfile as Eve format.

  2 copy the backup of the watch parts, catalogged them on the day before.

  3 recovered Eve with noredo option - it fails here with the same error pointing to the 21 data file.

  OK, understood. Try not to get back the day before first, rather than restore the controlfile and then perform the restoration.

  Make it like:

  1. take incremental backup of primary SNA, also ensures the backup controlfile format.

  2. copy pending, get the location of the data file (names) by querying v$ datafile on the eve. Restore the controlfile ensures from the backup controlfile you took on primary and mount.

  3. Since you are using OMF, the path of primary and standby data file will be different. (/). If you require catalog data from the database files pending.

  (Reason: you restore controlfile from elementary to step 2, which takes place from the main access road). Use the details that you obtained in step 2 and catalog them.

  4. turn the database copy by RMAN. (RMAN > switch database to copy ;))

  5 Catalog backup items that you copied in step 2.

  6. recover the standby database using 'noredo' option.

  7. finally start the MRP. This should solve your problem.

  The reason I say this works is because here, you restore the controlfile to primary first, which will not have details 21, datafile, and then you are recovering. So it must succeed.

  In the previous method, you tried to first collect all the day before, and then restore the controlfile. While remedial classes, always watch seeks datafile 21 as he controlfile is not yet updated.

  HTH

  -Jonathan Rolland

• Why can't I preview the changes before putting them live on the remote site in a browser?

  Help, please! I have inherited a website for editing and can't seem to get a preview of my changes without them going to live first. When I click on 'Live', the program hangs and I have to reopen. When I click on 'Preview in browser' he asks me to save the file or not and puts them on the remote site as well. I'm not particularly web savvy and learn on the way. I use CS6 on a Macbook OS X Yosemite.

  Your test server (Mamp) works?  If this isn't the case, you must start it.

  Nancy O.

• Error during communication with the remote host when you create the new virtual machine

  I'm under 7 ESX servers on IBM Blade H22 there is a mistake to invite while I create a new virtual machine

  on the vcenter Server

  At the end of 30-35 minutes, it gives an error

  "Error during communication with the remote host"

  The existing machines are working well... I tried to create virtual machines to other ESX servers as well

  but the same question. I also tried to make the clone of existing machines, but without success

  Can anyone help?

  You rescan the LUNS once?

  You've restarted the management agent?

  You've restarted the vpxa?

  If this isn't the case, please perform the step above and check out them.

• Site Web is updated online, but seem to update the remote site pane?

  I use Dreamweaver 8.

  I am updating a website I have created initially.  I did this summer with success, until I did a major synchronization in order to cleanse the body of some really old files and make the site easier to manage for everyone.  Sync seems fine, but got it wrong in the end and ended up with the 'old' mainwebsite file and a mainwebsite file 'new '.  I then synced and it deleted the 'old' main site file (which is what I wanted to do).

  Now, when I do updates and put them on the remote site... they do not appear online.  Update the side "remote" site of the box of files.

  I tried to remove the site and then re - get the whole thing as if I've ever been in, but it is not yet published on the web.

  When I "re-" the site, he came with the old main site file, so I'm not sure what the field is SEO.  The old site file could be hiding somewhere on the FTP?

  Any ideas I could try?

  Sorry if I don't am not worded this correctly, I am new to Dreamweaver and use this site to learn the basics.  Thanks in advance!

  You need to be sure the site definitions are contained properly, if we're wrong, local or remote, you will have problems that you have.

  http://TV.Adobe.com/#VI+f1592v1760 Watch this video for a better explanation I can give.

  Brad Lawryk
  Adobe, Dreamweaver community expert
  Northern British Columbia Adobe User Group, Adobe user group manager

• Problem connecting to the remote site

  I created a FTP user on the remote server that works perfectly fine, when I click on test connection. Now, when I click on the remote view or download a file, or connect to the remote server I get this message-"Waiting for server" then I get this error message "connection to the remote host is lost. "Click the button connect to reconnect." I disabled my firewall too. This has been driving me crazy for a long time. Any source of help would be a great help.
  Thanks in advance.

  I had finally found the solution. My internet access point was behind the residential gateway, who created an internet cache (something like). I had to install cygwin which solved the problem. Just had to follow the simple rules to install and you have the problem solved. In any case, I would like to thank all those who had given their suggetions.
  Thanks again.

• Traffic redirect Internet from the remote site on the main site using the tunel of vpn ipsec

  Hi all

  I have a problem to redirect internet traffic from my remote to the main site by the IPSEC VPN tunnel. The remote site is a Cisco 2801 router with ios (c2800nm-advipservicesk9 - mz.124 - 22.T) and the remote site has ios (C870-ADVSECURITYK9-M, Version 12.4 (15) T12, fc3 SOFTWARE VERSION). This redirect does not work and the last jump with extended traceroute form the remote site is the ip wan of the main site.

  Is there someone who can help me with the right settings this redirection via VPN?

  the remote site config file:

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Tableau Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 cm 5.4pt cm 0 5.4pt ; mso-para-marge-haut : 0 cm ; mso-para-marge-droit : 0 cm ; mso-para-marge-bas : 10.0pt ; mso-para-marge-gauche : 0 cm ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  crypto ISAKMP policy 8

  BA 3des

  md5 hash

  preshared authentication

  ISAKMP crypto key dgsn2010 address 41.223.X.X

  !

  !

  Crypto ipsec transform-set esp-3des vpn

  !

  vpndgsn 10 ipsec-isakmp crypto map

  Description at HQ

  set of peer 41.223.X.X

  Set transform-set vpn

  match address VPNHQ

  !

  interface FastEthernet0

  IP 41.223.X.X 255.255.255.0

  NAT outside IP

  IP virtual-reassembly

  IP tcp adjust-mss 1300

  automatic duplex

  automatic speed

  vpndgsn card crypto

  !

  interface FastEthernet 4

  192.168.11.1 IP address 255.255.255.0

  IP nat inside

  no ip virtual-reassembly

  !

  IP route 0.0.0.0 0.0.0.0 41.223.X.X

  VPNHQ extended IP access list

  ip licensing 192.168.11.0 0.0.0.255 any

  !

  the main site config file:

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Tableau Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 cm 5.4pt cm 0 5.4pt ; mso-para-marge-haut : 0 cm ; mso-para-marge-droit : 0 cm ; mso-para-marge-bas : 10.0pt ; mso-para-marge-gauche : 0 cm ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  crypto ISAKMP policy 10

  BA 3des

  md5 hash

  preshared authentication

  ISAKMP crypto key dgsn2010 address 41.223.X.X

  !

  !

  Crypto ipsec transform-set esp-3des vpn

  !

  vpncreo 10 ipsec-isakmp crypto map

  Description FOR bastos

  set of peer 41.205.X.X

  Set transform-set vpn

  match address 110

  !

  interface FastEthernet0/0

  Description OF WAN

  IP 41.223.X.X 255.255.255.240

  NAT outside IP

  IP tcp adjust-mss 1492

  vpncreo card crypto

  !

  interface FastEthernet0/1

  Description OF LAN

  IP 192.168.10.1 255.255.255.0

  IP nat inside

  automatic duplex

  automatic speed

  !

  overload of IP nat inside source list NAT interface FastEthernet0/0

  IP route 0.0.0.0 0.0.0.0 41.223.31.241

  access-list 110 permit ip any 192.168.11.0 0.0.0.255

  NAT extended IP access list

  deny ip 192.168.10.0 0.0.0.255 192.168.11.0 0.0.0.255 any

  permit ip 192.168.10.0 0.0.0.255 any

  ip licensing 192.168.11.0 0.0.0.255 any

  !

  You must configure the routing policy based closure for NAT can be invoked on the main site.

  Here is an example configuration for your reference:

  http://www.Cisco.com/en/us/products/sw/secursw/ps2308/products_configuration_example09186a008073b06b.shtml

  Additionally, make sure that you don't do any NATing at your remote end, IE: you must configure the NAT exemption for all traffic from 192.168.11.0/24 to any (Internet).

  Hope that helps.

• How to check if the link exists in the remote site

  Hi all:
  
  Guys please can you me if there is a way I can check if the link exists in the remote site? for example
  
  < cfif hyper link to www.mysite.com exists in www.remotesite.com >
  good... We will continue
  < cfelse >
  Please add link to www.mysite.com before continuing
  < / cfif >
  
  Is this possible... you have to use the spider? If yes how?
  
  Thanks guys,.
  A
  

  to develop the excellent suggestion of tclaremont:

  You can use refindnocase() to search the returned by cfhttp filecontent
  call us at:

  http://www.yourwebsite.com">
  method http://www.VisitorsPage' = 'GET' result = 'Foobar '.
  ResolveUrl = "yes" getasbinary = "auto" >
  <>
  foobar. StatusCode is "200 OK" >
  ] * href [^ >] *' & replace (myurl, '. ',' \.',)
  'all') & '[^>]*>(.*?) <\>', Foobar.filecontent) >
  link
  
  no link...
  
  
  ... connection error or the web page you requested does not exist...
  

  of course, if the www.VisitorsPage site is sneaky and has the link to
  your site code page, but hide it with css/javascript, it's going to
  be difficult to discover using regexp... better just go and watch their
  Web site...

  Azadi Saryev
  SABAI - Dee.com
  http://www.SABAI-Dee.com/

• FTP - cannot create the remote folder

  Help, please!
  
  I use DW 8 on iMac. When you download my site (using sync or put), all two used to work properly, I now meet the following error message and then I hunted:
  
  "error - cannot create the remote folder / folder name and the path--canceled by the user.
  
  I thought that the file may be corrupted somehow and removed completely from the site. On my next attempt, another file has triggered the same message, and so on...
  
  So I am unable to download my site and the bits and pieces that are on the web are truncated because the site is incomplete!
  
  What can I do?

  You may find it useful to stick with the DW FTP. Having the ability to
  Download up/dependent files is nice, as are the other (select features
  more recent, select recently modified, etc.).

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "hfeurstein" wrote in message
  News:fe8fti$K3U$1@forums. Macromedia.com...
  > To be honest, I don't know if I am running a firewall, I used to be a PC
  > user
  > but got so sick of stupid software windows, virus, constant need
  > updates etc that I bought an iMac and I can only assume that it is
  > running
  > some sort of firewall. In any case, I can confirm that during that time the FireFTP
  > has
  > completed download with no defects, this is why I would need is more DW.
  > Sounds
  > as if the investment is perhaps not quite interesting for a novice like
  > me
  > who really isn't a developer and just use it for simple tasks.
  > mercy
  > However, I like the ftp Sync feature and would like to continue
  > use it.
  > However, sounds as if there are a few flaws in the software
  > who
  > need to be ironed out.
  >
  > Having said all that, I really appreciate your help and especially
  > responsiveness, which is not easy to find these days. I'll take one
  > additional
  > Advisor you may have and thank you once more our support.
  >
  > Best regards, Harald
  >

• Resolved - getting error when connecting to the remote database to the host

  Hello

  I try to connect to the remote form of database host and get error. Can someone please help.

  I've seen a few threads about similar issues, but I am not able to solve this problem.

  I use Oracle Apps 12.2.0, Linux 5.1, Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit, using SQL Developer to connect.

  I am able to connect using SQL Developer in distance and using the same credentials in SQL Developer host, but in error

  Status: Failure-Test failed: IO Error: Connection reset

  The host

  I am able to ping remote, but cannot tnsping

  The tnsping error-

  Use settings files:

  C:\app\oracle\product\12.1.0\dbhome_2\NETWORK\ADMIN\sqlnet.ora

  EZCONNECT adapter used to resolve the alias

  Try to contact (DESCRIPTION = (CONNECT_DATA = (SERVICE_NAME =)) (ADDRESS = (PROTO

  (COL = TCP)(HOST=192.168.1.102) (PORT = 1521)))

  AMT-12547: TNS: lost contact

  Here are more details

  I have added the following in the TNSNAMES file. ORA file

  SCREW =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.1.102)(Port= 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = SCREW)

  )

  )

  I have added the following in the listener

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.1.102)(PORT = 1521))

  )

  )

  Finally - the firewall is disabled in Linux Machine

  Can you ping the server IP (or nomhote.nomdomaine) address of the client machine?

  What is the error you get when you issue "tnsping SCREWS" of the client machine?

  You have added the following entry to your client's tnsnames.ora file?

  +++++++++++++++++++++

  SCREW =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.1.102)(Port= 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = SCREW)

  )

  )

  +++++++++++++++++++++

  Can you reproduce the problem with sqlplus? If so, please see (11.5.10 news: run SQL * Net access for guests (Doc ID 291897.1)).

  If the problem with SQL Developer only, please see (SQLDeveloper receives ' java.sql.SQLRecoverableException: IO Error: Connection reset "and ORA - 609 database alert (Doc ID 1483287.1)).

  Thank you

  Hussein

• . Audio OGA works very well with local files, is to play at the remote site.

  I created a mini-site. It works well when I test it on my computer using local files, but the sound does play with it is downloaded on my remote site.
  The problem occurs on multiple computers, with several versions of Firefox, on Windows 7 and OSX Snow Leopard.

  Your server sends the correct MIME information in the Content-Type header? See this link for more information: https://developer.mozilla.org/en/Configuring_servers_for_Ogg_media

• "Cannot display Page" error when you click the Remote Agent

  Hello world! ACS SE 4.0, we have installed and we have added a remote agent running on Windows Server 2003. Recently, we encounter "Cannot display the page" error when we click on the RA under a group of network devices. It's resolved by restarting the device SE ACS and access the web console for ACS still once, but after a few hours, the problem reoccur. By clicking on the links on the web console for ACS is OK at first, but after clicking on the RA, each link displays the error "Unable to display the page." Hope you could help me with this problem. Any person support is much appreciated.

  Thank you!

  Hi Jas,

  Here is the bug CSCsg40444.

  Kind regards

  ~ JG

  Note the useful messages

• Error when connecting with the Remote Console

  We get the attached error when you click on a paralytic to vCloud Director.  The inner coating IP address is the ip address of the proxy console.  Any ideas what might be causing this error?  I thought, it might be something with my SSL certificate, but I'm not sure.

  1. it's a Windows 7 view Client using IE 9

  See the installation and configuration (https://www.vmware.com/support/vcd/doc/rel_notes_vcloud_director_10.html) guide, IE 9 is not supported, and only browsers supported on Windows 7 are Windows and Firefox 3.* 8.*.

  2. it takes about 1 minute and 45 seconds, but the error pops up 2 seconds after the Remote Console window opens.

  Certainly, that's the problem here. It shouldn't take 1 minute and 45 seconds for the remote console to pop up window, in fact, I would say that it should begin in a few seconds (certainly less than 10 seconds). You are not sure if it's because of IE 9?

  4 see attachment log of error messages when trying to access the virtual machine

  The error message looks like it tries to connect to my server vCenter.  Do the users who are connected to vCloud Director must be able to connect on the server vCenter Server?  I thought it would just use the user that configure you when you connect on the vcenter Server.

  The console proxy (a component of the cell of vCloud Director) acts as a proxy for users connected to vCloud Director. It is the latter that connects to your vCenter Server server, and that's what you read in the papers.

  Try this on any other OS/browser support matrix. In addition, if you can dig why it takes more than 10 seconds for the remote console to the pop-up window, you would have found yourself a solution. If this does not work, contact the Support of VMware.

• I can't update to of things - like iTunes, flashplayer or any error games resource or the remote device does not accept the connection

  Hi as I said in the title, whenever I have troubleshoot my connection says the remote device or resource does not accept the connection. I have a race a portable CAREB on windows 7. I can internet eyebrows and watch videos online and things like that, but I can't update things like iTunes, flashplayer or any what games that I run on my laptop. everytime I try I get a message of program control connection what ever I am updating. I checked the other computers in my house and they are all very well, as well as in home game consoles have no problem connecting to the internet and update. someone help me please

  Original title: Troubleshooting my my wireless conecction and it say the remote device or resource does not accept the connection

  Hello

  Thanks for posting in the Microsoft Community. This problem can occur because of incorrect settings of Internet Explorer. Initially, make sure you have Internet Explorer as web browser by default on the computer, refer to this link: http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7

  Research I found that this problem can be solved by resetting the Internet Explorer settings. Try the following steps:

  1. Press the logo Windows + R to open the Run dialog box.

  2. Type inetcpl.cpl in the Run dialog box, press enter.

  3. Now click on the Advanced tab , and then click reset.

  4. Click apply , then ok.

   

  Note: Resetting Internet Explorer settings is not reversible. After a reset, all previous settings are lost and cannot be recovered.

  Please refer to this same thread http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/connection-problem-troubleshooting-the-remote/24bfdbf3-4914-45a8-ae45-38243b59be1c?page=1, he is older but he helped a lot of users.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• DW create the subdirectory on the remote site.

  I used Dreamweaver 2004 years for my site to work without problem. Recently, my remote hosting company moved to a secure server (and vice versa, due to problems). Since then, I can't download pages and then see the updates online.

  The connection tests very well and successfully download files, but they are not the files posted online.

  What happens is that DW is the creation of a subdirectory in the root directory of the /public_html/ on the remote server and pages updated in there. Of course, this means that my updates do not appear online because the link is wrong (my links don't have the subdirectory in them, because there is no such thing as the subdirectory on my local server).

  Why is this happening? It seems that the subdirectory, it creates and puts the files in has the same name as what I called my site locally, but that shouldn't matter, does it? It's just a name.

  My company remote host said it's something on my side (Dreamweaver), but I'm confused because the only thing I changed when they moved the site to a different server and back is once again the IP address.

  Any help you might have would be great. Thank you!!

  Looks like your site definition is somewhat made a blunder.

  Two places to search for an accidental redundant directory are in the window of your local site files. Your index.html page "should" be within the root of your local (all that you named your site). If it is in any other folder, except the local root, this file will be loaded on the server as a redundant directory level.

  It could also be wrong in your FTP settings. If you have something other than public_html in the root of the server (root), it won't go to the right place.

  Post a screenshot of your files window here extended (hit the development of far right button in the toolbar of the window files) while that connected to the server (to scroll both sides at the Summit if file lists are long) and a snapshot of your FTP info (make sure that the password is empty or displayed as dots) will determine what made a blunder.