Error (Hex 0xBFFF0015) time-out in NI VISA test panel when you try to play the system
Hello
I try to control the position of three valves actuator of four lanes of Garland. They are VICI Valco and model # EUHA. I connected them via RS - 232 to USB in my computer. I was able to communicate with them, when I sent a few simple commands through hyperterminal and when I open MAX devices appear and the sign says the devices are working properly. However, when I go in the test panel and try to run some of the default commands, I get timeout error, 0xBFFF0015, during the reading of the order. Thanks for any help you can provide.
To get your LabVIEW code, you right-click on the control/string constant and select '-' display Codes?
Tags: NI Hardware
Similar Questions
-
Error when you try to play the game: memory access violation
memory access violation
I have redownloaded a game that has been previously loaded on my computer, now I get this error when you try to play the game "Memory Access Violation".
Your sound card that is more than adequate.
If the game was previously installed and worked fine then maybe it is not been completely uninstalled.
I suggest you uninstall the game, look in the registry for any left over entries that can refer to the game.Then restart and reinstall the game.
Alternatively, you can try to install in compatibility mode. If the program is not compatible, then you try to install and run the program in compatibility mode.
Use the following steps:
(1) right click on the program
2) click Properties
3) click on the Compatibility tab
(4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.Check out the link here: make sure to run older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-WindowsLet us know if that helps.
Marilyn
-
Error message when you try to play the DVD
I get the following error message when you try to play the DVD:
"Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.
My OS is Windows seven, and I don't see any video updates on the HP Support site. Help!
Downloaded the codec?
-
Error 'UID without owner referenced. ' UID: U3020 class: ImageItem "when you try to save the site Muse CC converted in 2014 of the Muse
It works very well in my CC version. But will not let me save my old site. Everything I do is open and it says converted and record that it won't do anything and I tried everything
I suspect that you have purchased the model 'AgencyVisual.muse' of the forest of theme? It seems that this file contains minor corruption which requires repair by the development team. We have tried to contact the author of the model to see that the original model is repaired, but have not yet received any response.
If you send your .muse file to [email protected] as well as a link to this topic, we can repair the file and return it to you.
-
Error Isdone.dll when you try to play the game of FEAR 3
Original title:
I get an IsDone.dll error when I try to play my game Fear3. How can I get rid of him?
Hello
1. is the issue specific to this game?
2. are you aware of any changes made to the computer, before the show?
3. What is the exact error message?
4. when exactly do you get this error (for example at the launch of the game, the game or at random times)?
Method 1:
Perform a clean boot and check for the issue.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.
Method 2:
An analysis of auditor of system files on your computer.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7http://support.Microsoft.com/kb/929833
It will be useful.
-
Original title: when I try to start The Witcher Enhanced Edition 2 since the Launcher I get the error message:
witcher2. EXE - not found entry point
The procedure entry point? setfilesystem@system@fmod@@QAG?aw4fmod_result@@P6G?aw43@pbdhpaipapax2@zp6g?aw43@pax4@zp6g?aw43@44|14@zp6g?aw4 3@4|4@zp6g? aw43@paufmod_asyncreadinfo@@4@z5h@z could not be located in the dynamic link library fmodex.dll
Any suggestions... ?
Hello Nashcat,
Have you tried to run the Launcher in compatibility mode?Have you checked CDprojekt site for an update for the Enhanced Edition? Maybe they are aware of this problem? -
Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file. (((PLEASE HELP)))
I understand that this has been a matter of repetition and I made the suggestions listed and nothing works. This just started happening, although downloading songs, and once they are finished I'm not able to play them with Windows Media Player. The initial message indicates that the file has an extension that is not recognized by Windows Media Player.
I have a Dell Inspiron Laptop with Windows Vista Home. Any suggestions? What should I chahnge how I download and save music?
Hey Taylor09,
You may find that you are getting this message in Windows Media Player due to one of the following reasons.
a. you try to play a file that is not supported by the player.
b. you are trying to play a file that the player does not support, but the file was compressed by using a codec that is not supported by the player.
Step 1:
Confirm that you are trying to play a supported file type. The following article lists the types of files (formats) supported by Windows Media Player.
Information on the types of media files that supports Windows Media Player
Note that if you tried to play the file type is included in this table, the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.
Step 2:
Download the necessary codec to play the file.
For more information of Codec, see: Codecs: frequently asked questions
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
original title: error 0xC0AA02FF
I try to use a "USB" "cruzer" to create a disc repair system, but when I click on this drive to create it I get the following error message:
"The device reported unexpected or invalid data for a command. (oxC0AA02FF)
Hello
What method did you follow to create the system repair disc?
I suggest you to create the system with different USB repair disc and check if it helps.
Means all try the methods and check them off below if it helps.
Method 1:
Try to put the computer in a clean boot state, and then check if it helps.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Method 2:
I also suggest you to perform check disk (chkdsk) on the computer and see if it helps.
http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors
Note: You may lose a small amount of data while performing the check disk.
I also inform you that the data on the USB key will be lost. You should take a backup.
You can also check with the reference article below:
http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc
-
Receive the OXC0000022 error when you try to run the system restore
Original title: OXC0000022 ERROR
My problem started when I went to the site of JIGZONE Jigsaw, the picture window that shows the parts was not correct! I thought I might have a virus so I ran avast, SuperAntiSpyware, and has not helped. So I did the scan SCF/scannow and it did not show anything wrong. Then I tried to do a system restore to an earlier date, that's when I got the error message and it has not restored, I changed to another date and no luck. I went safe mode and tried to do the restore, no luck! Help, please!
My calculation uses Windows 7 Home Premium,
Thank you!
Carrman Daddy 2
Hi Carrman,
Sorry to hear that uninstall tool did not help uninstall you spybot and thank you for your update.
It seems that when we try to uninstall the software, the software looks file uninstall.exe which might have been moved or deleted.
I suggest you post this question on the forum of Spybot.
http://forums.Spybot.info/forum.php?s=62ab5cf724e2426acbd901d146640e2c
For your information: http://www.safer-networking.org/FAQ/How-to-uninstall-2/
I hope this helps to solve the problem, email us for assistance.
-
Error when you try to use the system restore: 0x8004230f
whenever I try to open system restore, I get the error code 0 x 8004230f, I did the SCF scan to see the number of files that could not be fixed what should I do now?
I installed Norton utilities 2011 & Norton anti virus
Hello
There are a variety of reasons for system restore problems
Norton and Norton product Tamper Protection is the main
Read about it:
http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US
http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
You can try restoring the system in safe mode
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
and malware can interfere with the restoration of the system
Download update and scan with the free version of malwarebytes anti-malware
http://www.Malwarebytes.org/MBAM.php
You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes
http://www.bleepingcomputer.com/download/anti-virus/rkill
If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
-
I have Windows Vista and have recently purchase and installed Microsoft Office 2007. When I try to open files that I know to have been created in standard desktop applications, and in this particular case Word, I get an error message that the file is not "a valid WIn 32 application".
I can, however, open Word 2007 application and then open the file and it works, however, it's a pain in the _ and I don't want to do it like that - I want to double click on the name of the file directly from my data stick etc. and magically transported to my next exciting assignment to proffessors (honest)Help me OBI WAN KANOBI - your My only hope!
http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx
Office newsgroups
Discussions of general issues of Word.
They will help you with your questions Word/office in the Office discussion groups above.
See you soon.
Mick Murphy - Microsoft partner
-
Error 0 x 80070534 when you try to save the system from Vista to XP Pro
Hello
File sharing works very well between my computer laptop Vista Business SP2 and my desktop XP Pro SP3 IE. Can I manually read/write files on the desktop from my laptop and vice versa.
I want to implement Vista Backup and Restore Center to create a backup of my Vista files on the desktop computer XP Pro.
Backup and Restore Center, I specify the location of the desktop computer as backup destination:
\\DESKTOPXXX\BackupFolder (I manually tested this place can I read/write files on this site of the laptop.)
After that, Vista invites me for a user name and password for the Office:
Username: MSHOME\Dan (MSHOME is the name shared by two PCs working group)
Password: xxxxThis is where I get the error:
No mapping between account names and security IDS was done. (0 x 80070534)
No idea why?
See you soon,.
DanPS. I use a wireless network.
Okaaaay, it seems I got it work by using the user name "Dan" rather than "MSHOME\Dan".
Maybe it's just a stroke of luck, I'll post here if the problem comes back again.
-
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.C:\Windows\System32>CD "C:\Program Files\Fichiers Files\Adobe\Acrobat\ActiveX"
C:\Program Files\Fichiers Files\Adobe\Acrobat\ActiveX > del AcroIEHelper.dll
C:\Program Files\Fichiers Files\Adobe\Acrobat\ActiveX\AcroIEHelper.dll
Access is denied.C:\Program Files\Fichiers Files\Adobe\Acrobat\ActiveX >
Hello
· How do you try to uninstall Adobe reader software?
I suggest to reinstall the Adobe reader software, then try to uninstall it again and check if it helps.
http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
Also, the article below and check if that helps:
http://kb2.Adobe.com/CPS/402/kb402867.html
Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
-
Run the error when you try to play games online
Original title: access user name
Hello
Can someone tell me how I can access the username I am currently connected to Windows with. I need it to solve a problem I have encountered when trying to play an online game, that I bought that came with "run time error".
Thank you very much
Nick was soonHello
1. are you logged in as an administrator account?
2. what online game you try to play?
3. What is the exact error you get when you try to play the game online?
4 is this problem specific to a particular online game or all games online?
5. what web browser are you using to play the game online?
6. have you made changes on the computer before this problem?If you use Internet explore, you can read the following article.
The problems of games online using Internet Explorer
http://support.Microsoft.com/kb/2528246
Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.See also:
How to troubleshoot script errors in Internet Explorer
http://support.Microsoft.com/kb/308260
Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settingsPlease answer back with more information to help you further. -
Original title: "missing songs" in my windows media player then burn them on several cd :((
I burned songs to several cd using my Windows media player to make different Cd, but after I returned to my library all the songs that I burned to the CD have disappeared, they are there, but they won't play it is as if they have been deleted, a window appears saying that windows media player has encountered a problem when you try to play the file. I did not notice this until after Cd burning a few I can't do more because if I keep going I'm not going to have more songs in my library! I don't know what to do im going crazy, it took me a long time to get all of these songs and now he disappeared! I have Windows 7 Ultimate is the version 12.0.7601.17514 hope that helps
HelloThey were playing before you burn CDs?Method 1:
Open the troubleshooting Windows Media Player settings Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-TroubleshooterOpen the troubleshooter in the Windows Media Player library:
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
Method 2:
This problem may be due to database corruption. You can delete the Windows Media Player database and check if the problem persists.Steps to clear the database of windows media player:
a. exit Windows Media Player.
b. Click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.
c. Select all files in the folder and then click on Delete on the file menu.Note you don't have to remove the folders that are in this folder.
d. restart Windows Media Player.
Note: Windows Media Player automatically rebuilds the database.
If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:
a. exit Windows Media Player.
b. Click Start, click Run, type % LOCALAPPDATA%\Microsoft and then click OK.c. Select the Media Player folder, and then click on Delete on the file menu.
d. restart Windows Media Player.Note Windows Media Player automatically rebuilds the database.
Maybe you are looking for
-
After the upgrade to the 10 window, can not access internet in firefox or chrome
After installation, try to use firefox and chrome, it wouldn't go anywhere, IE edge works very well. Tried to reinstall both programs, does not work
-
I really get upset when software decides to stop what I'm doing and go update himself with asking them first. I disabled the auto update on my Norton and all Microsoft's Products. Before that updates are needed which is BS is just far from obsolete c
-
iPhoto App does not open on Mac Mini
Cannot open iPhoto on my Mac Mini running OS X El Capitan 10.11.2 The application on the dock has the reduced/white circle above the icon, as saying: "not available". When I click on iPhoto, I get this message: "the version of iPhoto installed on the
-
several finite pulse trains of TTL
Dear members of the forum OR,. We have just received a chassis NI SMU-1073 with an SMU-6361 OR switched in PXI1Slot2 and a shielded connector BNC-2111. Aims to generate trains of three TTL pulses to control a laser, sound and shock via Matlab Applica
-
I have a laptop Dell inspiron 1545 and I hope update by adding RAM, I was wondering, seeing that he has only two slots for RAM is the 4gig during one or two slots (two 2gigs)