Error in c:\windows\system 32\nvcpl.dll lack of entry: nvstartup
This appears when I connect my computer.
Hello
http://www.ProcessLibrary.com/directory/files/nvcpl/19579/
c:\windows\system32\nvcpl.dll is a library for NVIDIA graphics card file. No system like c:\windows\system32\nvcpl.dll processes are created from the software you have installed on your system.
http://www.ProcessLibrary.com/directory/files/nvstartup/25928/
nvstartup is a process which belongs to NVIDIA based graphics cards on and adds additional functionality for this range of graphics products
Make sure you have the latest graphics drivers installed from NVIDIA.
See you soon.
Tags: Windows
Similar Questions
-
original title: how to fix "C.\windows\system 32\TAPI32.dll".
When starting, I get a message saying "C.\windows\system 32\TAPI32.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or support software provider." What can I do to fix this?
Hello
You did changes to the computer before the show?
Method 1: Follow these steps and check if that helps.
Step 1: Try to boot in safe mode and check if the problem persists. Check out the following link to start the computer in safe mode.
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2: If the problem does not occur in safe mode then, restart the computer in clean boot in order to check whether a third-party program is causing the problem. To configure your computer to clean boot follow the link
http://support.Microsoft.com/kb/929135
Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.
Method 2: I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article. The SFC/SCANNOW command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
For more information how to make SFC / scan, please follow this link:
-
Whenever I start my computer this box apiers error in c/windows\system 32\nvmctray.dillmissing entry: nvtaskbrinit
Hello.
It is what explains what it is. I find a slightly different spelling (you are missing an 'a' in your nvtaskbrinit).
http://www.bleepingcomputer.com/startups/Rundll32.EXE_...NVMCTRAY.DLL_NvTaskbarInit-3827.html
See you soon.
-
Problem: Cannot start (not even in safe mode)
Operating system: Windows XP pro
PC: DEll 2400
Error message on blue screen:
"Windows did not start because the following is missing or damaged:------System 32\ hal.dll. I do not reformat the hard drive and lose all my programs and data.
If anyone can help, I would be extremely grateful.
Thank you
HAL811
Hello
I have fixed many times by the steps described in this article...
http://support.Microsoft.com/kb/330184
This is not guaranteed because the problem can be reduced to hard drive failure rather than just the corruption of the boot.ini file.
If it does not solve the problem, post back and I will get back on it.
Tricky
-
This happened a few months & I can't get rid of it.
Hello
Read the answers in the links.
See you soon.
-
c:/windows/system 32/dx7vb4.dll
When I restart my computer say unable to load c:/windows/system 32/dx7vd4.dll
When I restart my computer say unable to load c:/windows/system 32/dx7vd4.dll
Please check the spelling of the name of the file that you list. If your spelling is correct, you need to perform a malware scan. I recommend that scan you with Malwarebytes. Download, update and perform a quick scan, choosing to remove whatever it is detected by the analysis.
-
c/Window/System/dssec32.dll no is either not designed to run on the window or it contains an error. Try to install the program using the original installatn media or contact your system administrator or the provider of software for support
Hello
It is a part of a back door Trojan - check thorough using these methods and don't forget No.
one program detects and removes all malware. Added easy to detect the malware comes often
a much harder to detect and remove the payload. Only when you are SURE of EVERYTHING the system is clean, if you
Execute methods of cleaning included below.It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
the Windows when you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can download it here.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
http://OneCare.live.com/site/en-us/default.htm
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also do to the General corruption of cleaning and repair/replace damaged/missing system files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Pavilion dv2615nr: lack of system 32\NvCpl.dll
I've updated a laptop from a friend, and maybe he just can't run windows 10 64-bit edition.
in any case, I started with Windows 7 Ultimate and had everything works fine but since I went to 10 I have two error messages.
There was a problem starting C:\\Windows\system32\NvCpl.dll and
There was a problem starting C:\\Windows\system32\NvMcTray.dll
I searched and search and I know it is related to the NVIDIA drivers but I reinstalled and it keeps the switch back to default microsoft video drivers. I have to get rid of him on a restart after that relocation, but he came right back the next time I restarted the system.
The laptop seems to work very well and I would be happy to just get rid of the error messages.
I hope for more help!
See you soon,.
Jim
Hi, Jim:
Uninstall all graphics drivers nvidia you have previously installed and restart.
Then manually install the driver Vista support page for your laptop as follows...
This package provides the graphics/video driver and a user interface for graphics NVIDIA MCP67M in the notebook models and operating systems. This driver allows the video display and implements a UI for settingvarious shows the properties.
File name: sp37873.exe
Download and run the above driver file. You will probably get an error not supported operating system.
Conclusion of any windows error you get.
Go to Device Manager and click on the map to display Microsoft base needing the driver.
Click the driver tab. Click on set to update driver.
Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.
This file will be located in C:\SWSetup\sp37873.
Make sure that the include subfolders is selected and the driver should install.
Then restart.
-
Hi when I start my laptot get this time on screen, c:window\system\spool\driver\x64\3lxcf time.dll ewry. lack of entry_run dllentry@16 it please can someone tell me what it is regarding
This DLL (for example, Dynamic Link Library) would have to do with a dynamic timer in your Lexmark printer software. The Lexmark printer software is configured to load each time that you start the computer, so when Windows starts, this error occurs.
First of all, I would like to see if the Lexmark Support site has an update for your printer software. If no update is available, the original software and reinstall it. Who would recreate the DLL registration and should solve your problems.
-
I use window vesta 32 bit, when I start my computer, 1 get an error massage - Microsoft Visual C++ Runtime Library.
Runtime error! Program: C:\window\system 32\nvvsvc.exe. "This application has requested execution to terminate in a.
usual way.
Please contact support team of the application for more information. »
Please do help!
RIMA.
HelloWere there any changes made on the computer before this problem?Try these steps and see if it helps.
Step 1:Start in safe mode and check if you get the error.Refer to this link for help:Step 2:Try to check and clean boot if this can help.Perform a clean boot to verify if a third-party program or service is the cause of the problem.Refer to this article for more information:How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
Steps to perform a clean boot:a. click the ORB start on your desktop
b. type msconfig in the search box and press ENTER.
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
c. in the general tab, click Selective startup.
d. under Selective startup, clear the check box load startup items.
e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
f. click OK.
g. When prompted, click on restart.
NOTE: Please ensure to start your computer in normal mode when you are finished troubleshooting. Follow step 7 of the article mentioned above. -
My parents bought a laptop from a friend, and recently my father ran an antivirus program that came with multiple files in a folder that has been created by this friend. When you try to delete the folder a box appears that says "it is a Windows system folder and is required for Windows work.» It cannot be deleted. "But all the folders inside are empty and of no use to us. Help?
The standard answer to questions that begin with «I bought a used computer...» "is you can do a clean install of Windows, because you know not what could be hiding somewhere in the computer. In this case, it seems as if he is infected with something.
Legally, the seller was required to give you a way to do this reinstall, but in the vast majority of the private sales of used computers, this requirement is simply ignored.
If it's a laptop to 'mark' (e.g., Dell, HP, IBM/Lenovo) there may be a hidden partition on the hard drive that can be used to restore the computer to its "fresh from the factory" State. Of course, this will remove all applications that the previous owner had installed after he or she has bought new, but you should still seriously to consider making such a restore, if the mechanism is available.
What is the name and the version of the antivirus application that has detected the wrong files?
What are the names of the files?
What is the name of the folder that cannot be deleted?
Are you logged on as a user with the rights "computer administrator" when you try to delete it?Assuming that you can not or will not do a clean install of Windows, I suggest the following (do not run scans at the same time, each analysis may take some time, depending on the number of files on the computer):
Connect as a user with the privileges "computer administrator" and do a full scan with each of the following:
http://www.eset.com/us/online-scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx (requires download)
http://www.PCtipp.ch/downloads/Sicherheit/35905/multi_av_scanning_tool.html (page is in German, but the downloaded scanner is in English)Also download, install, update and run a scan complete with each of the following:
-
What does this module do? I didn't notice anything either except monitor problems work inappropriately. Ken
Hello
Malware - to ensure that his party - be very full because it is difficult to remove and may be accompanied by others.
To remove this error message, see the next post below.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can download it here.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also do to the General corruption of cleaning and repair/replace damaged/missing system files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
=======================================
After the above and you are of course his party if you still start up error messages:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
I got an error message 0x8002801c then that he was trying to use Microstratergy Desktop.First I got an error that the ActiveX component cannot create object... plz help me
Hi Ankushkar,
1 are you facing any problem with the windows operating system?
2 is the only limited issue while access Microstrategy?
The 0x8002801c error value means, access to the OLE (Object Linking and Embedding) registry error. You must copy the MSCOMCT2. OCX file in C:\windows\sysWOW64 not C: \windows\system32.
Run the command with elevated privileges, to do this, follow the steps below:a. Click Start in the start search bar type CMD, right-click on the command prompt icon in the box programs and then click Run as administrator.
b. at the command prompt, type regsvr32 wmnetmgr.dll and then press ENTER.Note: Make sure that you are logged as an administrator of the computer.
See the following for more information Microsoft article.
How to use the Regsvr32 tool and solve the Regsvr32 error messages
Keep us updated on the status of the issue.
-
I starts instead of windows displays an error coming. It says I'm missing:
\system\ntoskrnl.exe. How can I fix it? Hello Gwafer74,
This problem can be caused if the Ntoskrnl.exe file is missing or damaged. You can follow the steps described in the article for this problem:
http://support.Microsoft.com/kb/314477
Follow the steps in method 1.
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think. -
error in c:\windows\system32\nvsvc.dll lack of entry: nvsvcstar
I tried a few reg fixers and none of them address this problem for me. Basically my dvd players are only a part of all installed a coup and they appear as usable but I installed anything new.
Hey Raymond,
What is the number and model of your computer?
Difficulty of running save isn't a very good idea, because it does more harm than good.
DVD drive problem
It is a Microsoft Fix it available to solve the problems with the DVD player. You can find the fix here:
Your CD or DVD drive is missing or is not recognized by Windows or other programs
Run it and the problem would probably go away. If necessary, follow the remaining steps in the article.
nvsvc.dll error:
You have an Nvidia card?
On your error message, nvsvc.dll belongs to the Nvidia driver. If you have the Nvidia card on the computer, update the drivers on his last should solve the problem.
Find updates here: http://www.nvidia.com/Download/index.aspx?lang=en-us
For updates of the driver, see this link:
Updated a hardware driver that is not working properly
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
cannot access iPad previous owner does not remember the account of what I can do
I can't access
-
Satellite A100-906 each time after power button
Satellite A100-906 each time after pressing the button will stop exactly in 1 minute.And in Setup mode too. What it means?
-
USB printer not detected on satellite series?
Hello Have a laptop Toshiba Equium and today I bought a printer from a different manufacture.USB cable is not supplied with the printer (not good things) and so had to buy a. Laptop does not accept the USB cable saying something like USB isn't signwr
-
I am faced with the question of battery "plugged in, not charging" for the last 60 days or more. No ONE in the HP customer support has been able to / ready to help me. As a last desperate attempt to write here. Here's a summary of all my interactions
-
I'm confused and I think I must miss a (simple?) detail somewhere. I'm updating the icons of all the members of a class of lvoop of a different color. Specifically, a shade of blue (RGB = 0 - 96-128). However, I get another shade of blue (RGB 0 - 102