Error in communication on V715w
Recently I get a Communication error message:
What seems strange to me is that I get this with the green light of Wi - Fi, and I can ping the printer and get an immediate response, so I know that the printer and the computer are in communication. What is causing the error message? Several times, I just clicked OK, after a short pause, I get the error message again once, I re - click OK and repeat this process for a few minutes and finally the job will print. Sometimes I lack patience well and either restart the computer or the printer. Any ideas on what I need to change to put an end to these Communication error messages?
shelquis,
Restart the computer. After have connected you, wait 2 minutes and then try it. I don't know any other solution. It has to do with Internet Explorer, but with all the updates, do not know if other updates are involved.
From time to time, if an antivirus program is updated to a new version, this could happen, but not likely.
Rick
Tags: Dell Peripherals
Similar Questions
-
Error during communication with the remote host when you create the new virtual machine
I'm under 7 ESX servers on IBM Blade H22 there is a mistake to invite while I create a new virtual machine
on the vcenter Server
At the end of 30-35 minutes, it gives an error
"Error during communication with the remote host"
The existing machines are working well... I tried to create virtual machines to other ESX servers as well
but the same question. I also tried to make the clone of existing machines, but without success
Can anyone help?
You rescan the LUNS once?
You've restarted the management agent?
You've restarted the vpxa?
If this isn't the case, please perform the step above and check out them.
-
OfficeJet 6700 analysis via radio to 90% and then fails with an error of communication
New HP Officejet 6700 Premium; no error during installation; -device not scan via radio: scan to ~ 90% with the visible image in the preview is when inaccessible window of the Scanner is returned with the error message "Scannner communication cannot be established. Ensure that your product is turned on, check the connection... ».
Dell Inspiron E1505 laptop. Vista; Trend Micro Titanium 2011 Dell
- Network wireless, print, fax work very well.
- Software has been uninstalled, cleaned and resintalled.
- Fixed IP address received.
- Windows drivers are the most common, HP device firmware is up-to-date.
- When the trend is disabled, scanning works completely.
- All scanning functions and work completely through USB with active trend.
- MS Paint scanning to the device wireless without problem with active trend.
- Ports below were opened in the Windows Firewall.
TCP UDP
137 137
138
139
161427 427
9100
9220
9500
- Printing and scanning doctor works and ends when the trend is disabled.
- Print and scan doctor hangs up on Scan Test and returns the same communication error window when the trend is activated but no further information or help.
- Contacted Support of trend, which has provided information on how to create an exception in the product and advise him to: "... to add the file scanner to the program exceptions list." Trend has been unable to give advice on what specific HP or the files to add to the exceptions list.
- File by file, the following files have been added to the list of exceptions of trend without effect:
C:\Program Imaging\devicemanagement\hpzscro1.exe HP
C:\Program 6700\bin\HP Officejet HP Officejet 6700.exe
"\HP Officejet 6700UI.dll.
'\HPNetworkCommunicator.exe '.
'\HPScan.exe '.
'\HPScanDisco.exe '.
ScanToPCActivation.exe
ScanToPCActivtionUI.dll
Toolbox.exe
ToolboxUI.dll
C:\Windows\twain_32\HP Officejet 6700\HPScanUI.dll
'\Scanapp.ini '.
'\hpxsTwain.ds '.
- Device IP address correction has been added and listed as an exception in Web site.
- Other computers are able to scan wireless unit.
Are there other HP file or file windows called scanner of HP who participates in the scan Communication that must be added or tried?
A short history:
After spending 4 hours and countless computers, printer, router restarts, channel changes etc, on the phone with HP printer support, to solve this problem, I was called back to my firewall provider (Trend Micro) when the product is disables scan works. (Yes, it's the same question that I started.) As you can imagine made me unhappy...? Since I had already made contact with them for advice on how to configure the product before posting here in the first place and, possibly, appellant assistance from the printer.
The solution was finally trend had me to rename a file in the registry, which, I presume, caused the trend product regenerate a clean version of the file. As trend firewall exceptions had already been saved, scan over wireless works now! I post the location of the file and registry name, unless you use the identical product etc. to modify your registry database is scary business.
Naturally, because it was just going to be like that, scan network worked, but then the network printer showed offline and I couldn't online despite shooters evil etc. In the end today I completely uninstalled the product and the resinstalled it and now everything works. Hard to be too crazy about HP, when, notwithstanding this saga, HP was right to send back me the vendor of the firewall... everyone gets their turn in the barrel of the dysfunction of the technology, and it was mine.
What a striped set incredibly complicated of technologies that we depend on. Travis, thanks for your help and trying on it.
-
This has been my problem since. I didn't download any application still via the computer. Help me guys.
Hi hamza
Welcome to the community
If you use a Chrome or Firefox, I suggest you use Internet explore for now, once the plugin since intalled on the browser, Chrome and Internet explorer share almost the same settings, it should work well with Chrome after him.
Please leave a message if you have any other questions.
Ron
-
Unable to connect to the VPN, get error 800, communication
I am trying to set up a connection to a VPN, get this error 800:
The remote connection has not been because attempts VPN tunnels failed. The VPN server is maybe inaccessible. If this connection tries to use an L2TP/IPsec tunnel, the required security settings for IPsec negotiation is may not be configured correctly.
Hello
Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads -
HP photosmart 6520: communication error message - distorted impression
I updated my computer and when I install my printer hp photosmart 6520 goodbut everything then when I go to print I get the following message.
Unable to communicate with the computer
The print job is not complete because the printer is unavailable or offline. Check your wireless connection or the cable and make sure the printer is powered on and ready.
If you have installed this printer by IP address, you may need to update the IP address. Use the element to IP address update at the entrance to start for this printer menu.
Click Help for additional support information.
To cancel the print job, click Cancel.
I am connected via a cable and you have never configured with an IP address. The printer will print on what I want, but it is all distorted and the colors are all off. Please can someone help me solve this problem.
Thank you
Hi @Jo_74,
Welcome to the HP Forums!
I see that you get an error of communication, with your printer HP Photosmart 6520, Windows 8.1. And I'm happy to help you!
What happens when you print a test page from the printer control panel? Video: printing a Test Page. See you again distorted impression?
You see error messages on the display of the printer?
In the meantime, try the following steps:
(You can skip step 6 If you want to, because it is not a network connection)
-
Original title: communication failure 145905 [invalid header]
When you try to install a program I always get this error each time message: Server error 145905 communication failure [invalid header] would appreciate any help that anyone can provide. Thank you.
Hello
That is the application that you are trying to install?
I suggest you follow these methods and check.
Method 1: Run the hotfix to correct the following problems with programs that cannot be installed or uninstalled
http://support.Microsoft.com/mats/Program_Install_and_Uninstall/
Method 2: Perform the clean boot, try to install application.
Follow the suggestions of this link.
http://support.Microsoft.com/kb/310353
NOTE: Once you check the functionality, follow the suggestions under steps to configure Windows to use a Normal startup state.
If the problem is specific to the program, I suggest you please contact the manufacturer of the program for utilities.I hope this helps!
-
I want to remove the communication error message. Printer works now ok
I had to reinstall my Epson CX3200 printer. I can now print ok, but I get a message that says error of communication despite the fact that it is printing ok.
Hello KMallon,
Thank you for your message. We will try to remove the printer Epson NOT THE DRIVER software. Then restart your computer, you still have the error of communication? Otherwise, you can install the printing software Epson and everything should be back to normal.We can't wait to hear back on your part.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
Canon PowerShot SD1200 IS digital camera 10MP - Communication error
Recently the camera communicates more with one of my computers (one is 32-bit, the other is 64-bit). When I connect the camera, it displays a message that says: ERROR of COMMUNICATION. I tried using a different USB cable, but it does not help. Recently, this problem started to occur. Previously the camera would upload photos to a computer very well.
I would like any suggestions or solutions.
Hello
I suggest you follow the advice given by Rohit Lydia from following link and check if this can help:
I hope this helps.
-
Often get error Communication Link failure
Frequently to link failure error in Communication with the host downstream, we recently Upgraged our FMS to 5.6.4 5.5.8
Pls suggest any quick solution
Sriram salvation,
Sorry for the delay in responding.
The log you posted has about 7000 errors in this document, eight of which are "Communications link failure".
These mistakes and others in the file, suggest that there is some network downtime intermittent between SGF and its database and monitored hosts and the FMS.
It would be wise to correct these network failures and also address the other issues identified in newspapers of this.
Is recommended to open a pension case .
I enclose an automated analysis of the log file created by the consultant of Foglight excellent David Mendoza.
Kind regards
Brian Wheeldon
-
I have two computers that share a Dell V715W printer. The office is connected to the printer via the USB port and the laptop is connected to an Ethernet network. Also, the printer is connected to the Ethernet network. The office is running 64-bit Windows 8 and the laptop is running 32-bit Windows 7.
I never have a problem from the desktop printing, but the laptop is going to print, then ends up back with an error. Communication is not available, the printer cannot communicate with the computer. Generally a restarting the laptop will resume printing. If this does not work I have to reinstall the printer on the laptop.
jturcich,
Try the above settings?
Why is the printer using the usb cable? This is a wireless printer. If the wireless card is configured, a laptop can print wireless and an office that is connected to the wireless router allows to print wireless, no usb cable required.
Check the Zone Alarm. Had printers block Zone Alarm several times.
Rick
-
Wireless communication is disabled - Satellite A660
This is the second time this question has had this machine. The first time, it has been resolved by applying the defaults in the BIOS.
Now, 6 months later it's back:
The wireless switch is turned on. If I push the button it goes off for a second then turns back on. By pressing functionF8 gives this error: "Wireless Communication is disabled. Please activate the wireless communication switch "." Networking troubleshooting said to turn on the wireless capability.I have:
1 opportunity F9 and F10 in Bios to reapply the default settings
2 remove the card entries from Device Manager (Microsoft & Realtek) wireless network and restarted.
3. apply the latest version of the BIOS and rebooted.None of them have had no effect on the issue.
Can anyone help?Hello
Try this:
-Uninstall the Value Added Package
-Uninstall the Support of Flash memory card utility
-Uninstall the Wlan driver
-Restart the laptop
-Clean the registry with CCleaner
-Restart the laptop
-Install the latest Wlan driver http://aps2.toshiba-tro.de/wlan/
-Restart the laptop
-Install VAP
-Restart the laptop
-Install the Support of Flash memory card utility
-Restart the laptop
-Try to turn the Wlan using FN + F8Good luck
-
Communication failure USRP 2952R after loading image
Background
I recently started working with the NOR-2952R (X 310) and I'm trying to contact her on the 1 GB NETWORK card on a Linux server. I am very familiar with the USRP N-210 and I'm looking to use it in a similar way.
Problem
My host uses UHD 003.007.001 so when I first performed a uhd_usrp_probe, I got the standard incompatibility message shown below, so I reimagee with the X 310 bit file comes from uhd_images_downloader. The little-used file was usrp_x310_fpga_HGS.bit.
Error: RuntimeError: number of firmware compatibility 0x3 WAITED, but had 0x4.0
After loading the new image, I received x 300 errors of communication/fw as follows:
[user@host ~] $ / usr/bin/uhd_usrp_probe - addr = 192.168.10.2 args
Linux; GNU C++ version 4.4.7 20120313 (Red Hat 4.4.7 - 4); Boost_104100; UHD_003.007.001 - 0-unknownUHD error:
x 300 failure communication fw #1
EnvironmentError: IOError: x 300 poke32 fw - answer has expiredUHD error:
x 300 failure communication fw #1
EnvironmentError: IOError: x 300 peek32 fw - answer has expiredAfter a repair this problem for a few hours, I think I have bricked my device and I train using the JTAG interface to reimage the appliance.
Question
What is the right image to load for the UHD 003.007.001 driver and how to fix the failures of communication? My server using a Broadcom NIC and I saw another post, suggesting that users had issues with Realtek NIC.
Thank you.
As a follow-up, my camera was indeed bricks by a corrupt charge. I initially loaded (and subsequently recovered) my camera with the command below.
[user@host ~] $ sudo/usr/bin/usrp_x3xx_fpga_burner - addr 192.168.10.2 - fpga-path /usr/share/uhd/images/usrp_x310_fpga_HGS.bit
I was able to retrieve my device via JTAG with the same bit file and persisted in my image with the same command above.
Go Hoos.
-
Each cycle of operation of 5 I get error 50405
Dear,
I am trying to solve this problem for the last month, it make me crazy every day.
I posted the same post ago last month and I got the answer from the experts OR, that its the problem of leting the vi running for only 5 cycle (previously showed only after 2 cycle), after the 5-cycle the error appear again.More information link
I tried to solve the problems to the existing solution in this forum. I still get error 50405
Here's my vi updated seal and some information, hope someone can help you resolve this error.
Thanks for your support and help Lynn.
Hi MESHA'AL,.
Error-50405 is normally related to an error in communication between your device and your computer. I suggest updating your DAQmx driver to the most recent who will support your version of LabVIEW. See the compatibility chart for more details.
I also suggest upgrading your computers USB drivers and try the different USB ports, hubs and even the cable if you have another.
If possible, try to run your program on another computer to see if you can reproduce the behavior on another system.
Finally, if the presists of the error, try to run some of the sample code provided with LabVIEW so we can narrow this down to a problem with your code. At this point I'm leaning more towards a driver/hardware however problem.
-
Shared Variable deployment error
I need to use Variables shared in my code, and when I try to run the code I get the following error.
My computer deployment
Ventilation Library.lvlib\\169.254.192.23\Ventilation library of deployment deployment has failed (error:-2147220712, MAX: internal error (Hex 0 x 80040318): the customer has failed to connect on the server configuration, perhaps because the server is too busy or encountered an error of communication.) Note: the steps that you did which led to this error and contact technical support).
Completed with errors of deploymentThe code was working yesterday with shared variables, but it won't deploy today and I can't imagine any changes that I made to do this. I tried to run the code on my cRIO and the PC. I have used amd 2015 2014 and I get the same error on all.
Any help with this problem would be great.
What is the IP 169.254.192.23? It looks like an auto-negotiation-to-peer (e.g., crossover) connection IP or the IP address of your computer on the network?
Is the library with shared variables located under 'my computer '? If you right click on 'my computer' in the project - he shows here? IP address you think it correct?
If you check the custom address 'specify' and put 127.0.0.1 (loopback IP address), it works?
I also look in Windows Services and verify that the shared Variable service (and other services OR that it requires) are running.
Maybe you are looking for
-
Firefox crashes apparently no reason, no perceptible trend
I'm going to be reviewed, and Firefox will stop. It's usually when I click on something, but sometimes when I'm looking at the screen. After the last crash, I have opened Firefox and all my tabs are back. It happens once a day, sometimes more. The fr
-
I'm trying to set up parental controls for my pc. I downloaded windows for family security, etc. When I try to use it, it tells me that I have not accepted the terms. Help.
-
CD rom read as not all w 7 disk drivers are updated and without errors
Update vista to 7 w when the computer starts there is no icons or taskbar and cd rom does not read any disk says it all works fine without error
-
How to stop a program to declare - XPP
in Windows XP, if once you have uncheched in the start menu in MSCONFIG, restarted the computer and the program always starts when the computer is turned on, how to stop the program to start the power?
-
Windows Media Player - how to set the repeat function?
I set a schedule to play music using Windows Media Player, if I set the repeat function, then it will play the file audio repeatly, but first I would annex plays a sound at a specific time only once without repeat and play another his repeatly at ano