Similar Questions

• GPU acceleration disabled after loading image

  Recently I bought Photoshop CS6. I installed Windows 7 and run updates. I also updated my graphics drivers to the latest version (catalyst 12.8). I have an AMD Radeon HD 7700, which has 1024 MB of RAM. This card is on the list of supported cards.

  When I first load Photoshop I can look in 'Preferences-> performance' and see that the GPU has been detected correctly and "use graphics processor ' is checked.

  But after loading any image, including the use of "File-> new" to open a white blank image, the GPU is disabled. Look back in "Preferences-> performance" he says:

  "no standard available with photoshop gpu option."

  What can I do about it?

  You probably want to go back to pilots 12.6 - 12.8 seems to have problems.

• How mod an image after loading it?

  Im trying to load images and resized them all to the same size, considering the attached code:
  
  (1) how can I get the width/height of the image that I just loaded? everything I try, I still get the default size of the clip.
  (2) how is it, if I put the width and height to 20, yet the larger image has more height?
  
  My idea is to load a set of images in a folder and scale them so that they have the same width/height, distortion is not important.
  
  

  You did not indicate the width and height to 20. You set the magnification up to 20 percent. That's what _xscale and _yscale: the percentage by which an object is put across (enlarged or reduced).

  If you want to set a real image width and height:

  image._width = 20;
  image._height = 20;

• "A communication failure has occurred" when you transfer the file in Simulator

  I'm under Blackberry MDS Services 4.1.2 and using device Blackberry 9530 Simulator Simulator.  v4.7.0.75

  -Only the Blackberry browser is an option on this Simulator.

  -The Web page is a form that has an input file browse that selects an image file on the Simulator.  The form sends, but after 20-30 seconds, it seems to start timing and finally returns the error message below.

  -The same Web page works on a real device of Blackberry 9530 Storm without error.

  Error:

  A communication failure occurred with the chosen Mobile Data Service. The server may be busy, please try again later.  If the problem persists, contact your administrator.

  http://www.w3.org/1999/xhtml">
  
  
    
    
  
  
  
  
    
    
  
  
  
  
  Upload
  
  
  * Required field.
  
  
  
  smith, john
  
  
  1111 JAMES DR, New York, NY, 44444
  
  
  9234HH111111 (Property)
  
  
  Effective 02/14/2009
  
  
  
    
  
  
  
  
  File *
  
  
    
  
  
  
  
  Type *
  
  
  
    
  PHOTOGRAPH
    
    
  CLUE REPORT
    
    
  OYSC BUNDLE
    
    
  NY VEH INSPEC
    
    
  AGT FILES
    
  
  
  
  
  
  Desc
  
  
  
  
  
  
  
   
  
  
    
  
  
  
  
  
  
  
  
  ©2009 Insurance Company. All rights reserved.
  
  
  
  

  Support or ideas are appreciated.  Thanks in advance.

  Blueinc good tip.  I noticed that you were using the MDS of the JDE 4.7.0:

  C:\Program search in Motion\BlackBerry JDE 4.7.0\MDS

  I had been using the MDS for the stand-alone package of RIM:

  C:\Program 4.1.2\MDS search Motion\BlackBerry Email and MDS Services Simulator

  As soon as I tried the JDE 4.7.0 MDS, it worked without making any changes of rimpublic.property!

  So it seems that the bug is with 'BlackBerry email and MDS Services 4.1.2 simulators' MDS.  Thanks for pointing me the finger inadvertently in the right direction!

  Would be nice if RIM could fix the own MDS.

• Tecra A - Toshiba Power Saver error after loading the OS

  I have two problems with my XP Pro SP3 operating system

  (1) immediately after loading the OS, I got this error message

  http://photoserver.WS/images/oCVJ4c25d94898215.PNG

  (2) and my job doesn'r to reboot. Stüch Windows HE is shoting down, and I have to manually to swith out of turn.

  How to solve this problem?

  I don't know much about your model, but I think you should update a powerhouse of Eve:

  [Toshiba drivers | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

• SETUP-EPRINT PRINTER COMMUNICATION FAILURE

  LaserJet CP1025nw - I used to print my eprint software, but after updating firmware, everything went wrong. print the status page, no IP address and no network. Printer was uninstalled, reinstalled again. connected to the router; got the new IP address. checked to be in the same network with the router and the laptop; HP Connect recorded for eprint; eneterd assigns the code and adds the device to my account eprint. tried to print when the usb cable is attached works very well.

  The problem is when I try to install the eprint application it shows my printer with the correct IP address but then in the next step it keep saying "communication failure". I disabled windows firewall and no proxy is installed; always impossible to communicate. I have two laptops; working with windows 7 and the other with windows 8. Both has the same problem. I tried all the solutions I found on the HP site but without success. It made me desperate. It is the last solution for me before leaving this printer to buy a new one.

  Hi BAKJAF,

  Welcome to the Forums of HP's Support.  I understand you get a connection error message when you try to activate the web services of your printer, regardless of which computer you are using to enable web services.

  Please define Manual of the printer an IP address manually and DNS servers.  The steps are in the

  Document of the printer is not maintaining the wireless connection .  Look in the Windows section for "three Solution: the printer of the assign a static IP address.  The manual preferred DNS server please use 8.8.8.8 and 8.8.4.4 use for replacing manual DNS server.

  Once you have configured the IP address manually and manual DNS servers please try to enable web services.

  Please let me know how it goes.

• C0000218 {registry file failure} the regestry cannot load the hive (file)

  I have XP pro. on a Dell computer. Think that children may have picked up a few difficulties. When trying to boot into safe mode, I get "Stop: c0000218 {Registry file honor} the regestry cannot load the hive (file): \SystemRoot\System32\Config\Software or its log or replacing." It is damaged, missing, or not accessible in writing. »

  There is no disk that came with it, but I have anouther computer with the same windows. I tried to find a way to make a BOOT disk but cannot find a way. Is there a way to solve this problem with the windows disc?

  It's a pretty popular mistake these days and sometimes easy to get running, but you also want to figure out how it happened.  I always suspect Symantec/Norton products with this error, but we'll see.

  If you currently or have already had a whole isntalled Symantec/Norton products, what are the names and versions (if you know).

  Other variants are:

  STOP: c0000218 {Registry file failure}
  The registry cannot load the hive (file): \SystemRoot\System32\Config\SECURITY or its log or replacing. It is damaged, missing, or not accessible in writing.

  STOP: c0000218 {Registry file failure}
  The registry cannot load the hive (file): \SystemRoot\System32\Config\SOFTWARE or its log or replacing. It is damaged, missing, or not accessible in writing.

  STOP: c0000218 {Registry file failure}
  The registry cannot load the hive (file): \SystemRoot\System32\Config\SYSTEM or its log or replacing. It is damaged, missing, or not accessible in writing.

  I would start with a chkdsk/r since the recovery CD of Console you make (see below) and please answer a few questions...

  Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  Please provide additional information on your system:

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Fill in the blank: my system was working fine until this happened: _.

  If the system works, what do you think might have changed since the last time it did not work properly?

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• failure to communicate with the image drum?

  My m175nw is only 2 weeks... Everything worked great until I did the Firmware update.  Now, I get the following error and I think I printed only one (1) page since I bought this thing

  10.0004 power error
  10.1004 supply memory error

  There is a failure to communicate with the imaging drum.

  The update of the firmware was "2012-08-27, Version: 20120806, 10.28 M" and the error message

  10.0004 power error
  10.1004 supply memory error

  is the display on the printer control panel.   I was running Windows 7 (64 bit) at the time of installation, but I also have a system dual boot and can run MAC EVALUATE which the same message after restarting the printer.  Even with the computer turned off the M175nw displays the same error message.  As stated earlier, the printer is only 2 weeks, I think that I've printed 2 pages (with no problems) and the above-mentioned error did not appear after the update of the Firmware... I tried a reset to the default settings, but unfortunately that has no effect when the firmware has been updated.

• Loading image when using URL query

  I asked for help, for anyone who might be able to * cough * JRab * cough *.

  .... I want to show a small gif of loading when my app is in the middle of sending a URLrequest, so it seems that my application is something, while demand happens... because when the application load it takes a few seconds to get there and also to update the content displayed...

  Any help?

  Hey tensioncore,.

  the ActivityIndicator like all preloaded, including the image he. If you want a custom image, you will need to do the setSkin() method. but I didn't yet. Here's a sample code to test the feature. There is no need of an IF ELSE statement. the corresponding code is nice and clean, and definitely in my top 5 list QNX api hah

  ActivityTest.as:

  package
  {
      import flash.display.Bitmap;
      import flash.display.Loader;
      import flash.display.LoaderInfo;
      import flash.display.Sprite;
      import flash.display.StageAlign;
      import flash.display.StageScaleMode;
      import flash.events.ErrorEvent;
      import flash.events.Event;
      import flash.events.IOErrorEvent;
      import flash.events.MouseEvent;
      import flash.net.URLRequest;
  
      import qnx.ui.buttons.LabelButton;
      import qnx.ui.display.Image;
      import qnx.ui.progress.ActivityIndicator;
  
      [SWF(width="1024",height="600",backgroundColor="#e8e8e8",frameRate="30")]
      public class ActivityTest extends Sprite
      {
          private var _loader:Loader;
          private var _urlRequest:URLRequest;
          private var _image:Image;
  
          private var _btn:LabelButton;
  
          private var _activityIndicator:ActivityIndicator;
  
          public function ActivityTest()
          {
              super();
  
              // support autoOrients
              stage.align = StageAlign.TOP_LEFT;
              stage.scaleMode = StageScaleMode.NO_SCALE;
  
              /**
               * Set up the image placeholder
               */
  
              _image = new Image();
              _image.setPosition(10,10);
  
              addChild(_image);
  
              /**
               * Set up the activity indicator
               * Make sure to do setSize so it gets created
               */
  
              _activityIndicator = new ActivityIndicator();
              _activityIndicator.setSize(100,100);
              _activityIndicator.setPosition((stage.stageWidth / 2) - (_activityIndicator.width / 2), (stage.stageHeight / 2) - (_activityIndicator.height / 2));
  
              /**
               * Sample loader getting google's homepage image
               */
  
              _loader = new Loader();
              _urlRequest = new URLRequest("http://www.google.com/images/logos/ps_logo2.png");
  
              _loader.contentLoaderInfo.addEventListener(Event.COMPLETE, onComplete);
              _loader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, onError);
  
              /**
               * Button that starts things
               */
  
              _btn = new LabelButton();
  
              _btn.label = "Load Image";
              _btn.setSize(150,52);
              _btn.setPosition(10,150);
  
              addChild(_btn);
  
              _btn.addEventListener(MouseEvent.CLICK, onClick);
  
          }
  
          private function onClick(e:MouseEvent):void
          {
              /**
               * Start the animation and show the indicator on screen
               */
              _activityIndicator.animate(true);
  
              addChild(_activityIndicator);
  
              /**
               * Begin the image loading
               */
  
              _loader.load(_urlRequest);
  
              _btn.enabled = false;
          }
  
          private function onComplete(e:Event):void
          {
              /**
               * Stop the animation after image loaded successfully
               * and get rid of it
               */
              _activityIndicator.animate(false);
  
              removeChild(_activityIndicator);
  
              /**
               * set the image to the downloaded image
               */
  
              var bitmap:Bitmap = Bitmap(LoaderInfo(e.target).content);
  
              _image.setImage(bitmap);
          }
  
          private function onError(e:ErrorEvent):void
          {
              /**
               * If there was an error. stop the indicator
               */
              _activityIndicator.animate(false);
  
              removeChild(_activityIndicator);
  
              trace("error: " + e);
          }
      }
  }
  

  There are comments throughout. Basically, this application downloads googles image when you click on load image. and then when its downloading, it displays the activity indicator and get rid of it, when it finishes / generates an error.

  hope that a few things cleared up. Good luck!

• Update 5.0.  Directory of loading Images.  Permission denied

  I am trying to upgrade my APEX to 5.0.  I'm running on XE.

  I followed the steps below.

  Upgrade of Oracle Application Express in Oracle Database Express Edition

  Step 4 succeeded, but I get an error in step 5.

  Some examples of error messages.

  . Loading images directory: name/directory /...

  Directory created

  delcar

  *

  ERROR on line 1:

  ORA-22288: file or LOB FILEOPEN operation failed

  Permission denied

  ORA-06512: at "SYS." XMLTYPE", line 296

  ORA-06512: at line 16 level

  PL/SQL procedure successfully completed.

  I saw the links on the copy the APEX_HOME/images directory in a new directory, then and deleting and recreating it... / images directory and copy files back.  I did, but still get the errors above.

  Does anyone have any suggestions?

  Hi bh56,

  This may be due to you give a bad way while loading images using apex_epg_config.sql or apxldimg.sql.

  Reference: Re: blank page after successfully installing 4.2.0 4.2.6 apex

  In the link above thread, I explained, what is the problem with the parameter you give to the script apex_epg_config.sql and apxldimg.sql.

  Now, at APEX 5.0 during installation or during the upgrade you must use the same script apex_epg_config.

  Reference: Re: problem upgrade 5 Apex
  

  The documentation you follow above is for APEX 4.0, here is the documentation for APEX 5.0 in Oracle Database XE:

  https://docs.Oracle.com/CD/E59726_01/install.50/e39144/oracle_xe.htm#HTMIG29429

  I hope this helps!

  Kind regards

  Kiran

• Dell Precision 490 - Installer reboots after loading install.tgz

  Heya,

  I'm trying to install VMWare ESXi Update 1 4.0 on a Dell Precision 490 workstation. (Yes, not on HCL, I think).

  In any case, I boot on the CD, and it proceeds along until the "Loading image.tgz" Stadium, after which it restarts without delay.

  I took a video of the process, and in the last screen, just before the restart, he says:

  Module: install.tgz

  Loading install.tgz...

  Start-up: MBI = 0 00010150 x, entrance = 0 x 0...

  I tried to add that the 'noACPI' switch to the boot options, same result.

  There seems to be something similar to what occurred here:

  http://communities.VMware.com/thread/263240;JSESSIONID=9C89E876F761BC5E6D528BBB5ABC810F?TSTART=30

  But there is an answer. (I posted here to see if the author has managed to operate).

  See you soon,.

  Victor

  What you use for storage in the PWS490? What the rest of the specification of it (processors, amount of RAM, etc.)? Have you tried to install ESXi on a USB key (a device 2 GB +, SanDisk Cruzer work)?

  Once I have my iSCSI SAN built, I'll be able to see how to boot from the USB goes on my Tower of PWS490... Should be some time later in the day...

  VMware VCP4

  Review the allocation of points for "useful" or "right" answers.

• First Pro CC hangs after "loading media".

  Last week I had to Exchange my media from one HARD disk to another.

  Loading following the project of creation where crashed just after the "loading media" bar, has ended.
  No signs or whatever it be open as not expected. And first became completely unresponsive.

  I went back to the use of the original copy of the HARD drive, but I still had the same problem.
  My soultion was to create a completely new project and import my media.

  Today the same thing happened but I never moved the images on the HARD drive.
  The second project now hangs after "loading media" too.

  Other projects where all the files are on my internal HDD are fine.

  No error report is generated, and I have a small chance to be able to open the Task Manager to close the first. Usually, I have to pull the plug to turn it off because it seems like using 100% of my use of the disk.

  Everything is updated (6.0.5) and I am on Windows 8 (sorry don't know what data you need :/))

  Any help would be much appreciated!

  Try this:

  https://blogs.Adobe.com/genesisproject/2011/02/Premiere-Pro-CS5-maintenance-two-great-tips .html

• Photoshop CS6 bridge hangs on loading image in Photoshop

  Bridge CS6, text in the folder window freezes after loading an image of the bridge in PhotosShop CS6.  The bridge is rendered useless.  Closing Photoshop releases bridge.  Bridge does not update the type in the files window and UN-attached leaves partial tiles of images in the content window.  This time from esch takes place one image is loaded bridge in Photoshop.

  Photoshop CS6 & Bridge have been updated at 11:47 AM PST today 2012-12-07

  Win 7 64 X Professional latest updates from 2012-12-02

  Intel Core i7 Quad Core 950 3.06 GHz, 8 MB

  12 GB OF RAM

  EVGA GTX 460 GrForce - 1 GB graphics card

  'C' drive Intel X 25 120 GB SSD

  Work drive Intel X 25 120 GB SSD

  Two (2) hard drives 1 storage to

  Hi Jeff,

  I have the last video player for Win-7 64 x.

  Thanks for the tip, looking for the info pilot under 'Start', I discovered > "All programs" > "Nvidia Corporation" > "3D Vision" > "disable 3D Vision.  By disabling the "3D view" in the "all programs" menu cured the problem.  Kind of a strange place for a 'switch '.

  Hope this helps someone else as it was a very frustrating problem!

  Esch_ay

• Form of the loading image of jars only once in oracle 10g

  Hello
  
  I have a 10g oracle forms application that loads the image of a jar. Whenever I click on a button 'A' which loads the image 'image' on another button 'B' in the same screen, a message appears in the java console "loaded image: jar: https: / / + IP + / forms/java/+myjar+.jar!/image.gif '. So after 10 clicks, I get the message even displayed 10 times. In the form, I called:
  

  SET_CUSTOM_PROPERTY(p_object_name, 1, 'IMAGE_NAME_ON', '/'||p_image_name);

  My question is this:
  -is it possible to load this image once and use it later without having to load each time I clik on "A"? If so, how?
  
  P.S.: If this thread should not be posted in this forum, please redirect me to the right.
  
  Thanks in advance

  In the once - new - form - Instance trigger defined visible load, button, image, then re - set button is not visible.

  François

• Loading images order & miniature oriented image directly

  Hello

  May I ask 2 questions here.

  1) If you click on this link http://www.prashanthvfx.com/Concepts & Imaginery.html, you can see all my 14 drawings that had been lined up one after the other, try to load at the same time. Is it possible to set priorities, whereby the 1st image load first and second 2nd image loading and so on.

  2) If you click on this link http://www.prashanthvfx.com/art.html , you will find under "Concepts & imaginary ', I had posted 14 vignettes for the link above. All the images are related to the webpage above (14 images). Now, if you click on any thumbnail, it will open the link have been all most 14 large images are displayed from the market. My question is, can we device a way by which, if all first if we click on each image, it points to enlarge the image on the http://www.prashanthvfx.com/Concepts & Imaginery.html.

  Which means, if I click the last thumbnail 'Keep clean city', it will open and directly points to the last image on the linked Web page, based on the vertical scroll bar down, were that enlarge the corresponding image is displayed.

  Friendly note: I am an artist and posting my work on my website. So, I really appreciate your answers.

  Thanking you,

  Prashanth-

  www.PrashanthVFX.com

  The anchor tool to create named anchors on your Concepts & Imaginery .html page.

  Place the pegs above each picture.  Code might look like this:

  On the parent page, your links would look like this:

  Link to image 3

  Link to picture  4

  More on Named Anchors
  

  http://www.DWfaq.com/tutorials/basics/named_anchors.asp

  I think we can feature a simple script by which include the order of the images separated by a comma ', ' and if the browser will not load the 2nd image until it has completely finishined the 1st loading image. Correct me if am wrong.

  You can use a script pre loading image if you wish. But the order in which the graphics appear on the screen is always determined by the browser.  Some browsers first loading in small files. some loading of large files first.  Other loading the files in the order received.

  Related link:

  Best practices for speeding up your Web Site

  http://developer.Yahoo.com/performance/rules.html

  Good luck with your project,

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB
  http://ALT-Web.blogspot.com