Create new project to Phonegap Desktop

Similar Questions

• Error in creating new project to the NDP.

  

  Creating new project in the NDP, I came across the following error. How can I ressemelable this error. I have attached a screenshot.

  Please check if there is a section of configuration as below in Web\npd\web.config.

  And you have a config\Core\EqtUIModelDefinitions.xml file? If so, there could be error in there.

• Cannot create new projects in RoboHelp 7 HTML

  When I try to create a new project in RoboHelp HTML 7, the Type of projects field is empty on the new tab in the new project dialog box. I just bought this product after using the trial version for 30 days. I can open the projects I created before, but cannot create new projects. Help! I need it now!

  OK, this problem is solved, the problem was of RoboSource Control 3.1. I realized that I had installed RoboSource Control 3.1 during my trial installation (the installation option it is checked by default). By running again the trial download (thank God I taped it), I was able to uninstall RoboSource Control 3.1. (I could not uninstall by using the Tech Comm Suite installer or the Add/Remove feature in the control panel)

  Then I ran the installation Tech Comm Suite and reinstalled RoboHelp 7 (without installation of RoboSource Control 3.1).

  RoboHelp 7 HTML now works again. Note that only the HTML version has been screwed upward - Word version ran OK, I just don't need.

  Finally, I just want to say, Support technique Adobe * SUCKS *. After spending half an hour on my first call on September 26, "Ken" directed me to the web page of Adobe's Support and told me to enter my problem myself - thanks for nothing, Ken. He promised a tour of 24 hours around, which didn't happen.

  When I called back on 29 September, I lost another hour with Natasha and Sam, that had run me CSClean, which wiped out my registry for Acrobat and Photoshop entries, forcing a reinstallation of these products. Of course, who did not help me at all.

  Adobe, please stop outsource your Support to the India - these guys don't know anything!

  The answers to this question on the "Customer Portal" has been slow, indifferent and unhelpful. Shame on them!

  I write this fix this problem on this Forum, so the next poor slob may be able to solve their problem by themselves like I did, because the Technical Support will not help you!

• Create new project dialog - extra space generated after the prefix in LV2013

  Hello

  I'm just trying to use the new project dialog box create a LabVIEW2012 order to use the project templates.

  I would use my models from 2012 and the next versions, without having to change my code.

  But it seems that between LabVIEW 2012 and 2013, there is a small difference in the copy of the project template:

  -in LabVIEW2012: the project hierarchy is copied with the file prefix you have entered, the prefix

  -in LabVIEW2013: the project hierarchy is copied prefixed with the prefix of file you entered AND a Bangkok space empty

  What is a 'normal' behavior or just a bug? This generated empty space makes my non-functional projects...

  Is there a way to get around this?

  Thank you very much for your answers!

  We changed the addition of prefix in LabVIEW 2013 and later to add a space after the prefix. However, it does not add space if you include underscore in your prefix. Is your post copy script adding underscore everything generated code once the project created?

• Create new project and a serious error occurs...

  If I try to create a new project at any time during the operation of Premiere Pro program gives me a "serious error" message and does not leading to an accident.

  I'm under Premiere Pro CS6 on Windows 7 Professional.

  Here are the details of event properties:

  Name of the failing application: Adobe first Pro.exe, version: 6.0.0.0, time stamp: 0x4f7177ec

  Name of the failed module: Premiere.dll, version: 6.0.0.0, time stamp: 0x4f7177e5

  Exception code: 0xc0000005

  Offset: 0 x 0000000000012836

  ID of the process failed: 0 x 1810

  Start time of application vulnerabilities: 0x01cf5a695cfb64c0

  The failing application path: C:\Program Files\Adobe\Adobe Premiere Pro CS6\Adobe first Pro.exe

  Path of the failing module: C:\Program Files\Adobe\Adobe first Pro CS6\Premiere.dll

  Report ID: 1cc11ff4-c65d-11e3-9f91-bc5ff4bc429e

  Don't know what other information to give, as appropriate.

  Any help would be fantastic thanks!

  'Serious error' message is far from generic for troubleshooting purposes. Jim has posted this link because the crash news that samsandwich provided reports "Exception code: 0xc0000005.»

  Crashes on launch that begin to occur after the program has run successfully, the first thing I would recommend must clear preferences. Sometimes they get corrupted such that they keep the launch program. Here is an article explaining how to clear the prefs: http://www.larryjordan.biz/premiere-trash-preferences/

• PRE9: Creating new project, or open existing, shows empty window Editor (well enough)

  Hello

  I used PRE8 (elements of Prime Minister) and PSE 8.  Was never really able to Pre8 to work. (I'm happy with Elements 8).  I decided to bite the bullet and buy the items 9/PRE9 together (good deal on Amazon).  I removed 8 elements, PRE8, and a brand new installed v9 for both software (may have been waste of money!)

  Scenario 1:

  I can't get PRE9 to create a project that I can change.  (to be honest, I had a similar problem with PRE8, but it I could create, but it wouldn't let me open it).  It creates the project that seems and then comes the Editor window, but just about everything in the editor PRE9 menu are grayed out.  The 'new' and 'Open (existing project)' with the exception of the menu items.  No way for me to add video clips to the project, etc..  So useless!

  Scenario 2:

  I enter in elements Organizer, select a video, and then in the "Fix" menu, choose "edit video".  Editor of PRE9 rises, again as before, only 'new' and 'Open' menu items available.  Then he said to me 'corrupt project, cannot open file' (or something close to it)

  Any suggestions?   This seems very essential and fundamental, I am amazed, I have problems in the right basic tasks after a cleaning installed.

  Setup: Dell computer Inspiron 17 laptop, processor Intel i7, 4 GB of RAM.  PRIOR to version 9.0.3 elements 9.0.1,. Windows 7, 64 bit.  I have the installation carried out by Dell out of the box. I pretty much only use this PC for items and PRE (and web browsing - which can cause of course who knows what is downloaded on your PC).  I use the MacAfee virus checker.  I have it turned off during the PRE9 installation (not during the installation of items 9 However, forgot to turn off)

  Thanks a lot for any advice.  I'm new to this forum, my apologies if I posted in the wrong place (let me know where to post if I did)

  Stephen

  Stephen JSp wrote:

  I have the installation carried out by Dell out of the box. I pretty much only use this PC for items and PRE (and web browsing - which can cause of course who knows what is downloaded on your PC).  I use the MacAfee virus checker.

  Reference Dell 'out of the box' would mean that most of your drivers are up-to-date. Update video and audio from the web sites of the manufacturers. Your symptoms are very similar to those of the other users here and disabling McAfee during the PRE9 solved their problem and can heal yours.

  You also need to work your way through the tips here: pre hung, or overwhelming - some tips

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

• Create new project in existing HR HTML or import source files

  Hello
  I'm generating HTML using RH (X5.02) help file for Word (Word 2000). My current CHM needs links to DOC or XLS files and I can't work properly, because this help file is not too big, so I decided to import my HR for HTML project as stated in the documentation of such hyperlinks are supported.
  1. If I try to import my word source files, I like cannot create the database because the directory may be read-only . I talked with my colleagues below, tell me the directory is not unalterable, that all goes well and there is nothing to do with them.
  2. If, in despair, I try to create a new project, I'll by selecting the type of output, then on the screen where you specify the name of the project, the location, the name of the first subject. When I click on "Finish", I'm back for the type of output file and nothing else happens. If I use Windows Explorer, my directory for the project has been created, some files are there (with extensions of DPC, glo, hpr, syn, and css), but no project file.
  Aaaaaaaaaaargh, I'm starting to stress about this .
  Everyone knows that before? What can I do?
  

  I think I'd be inclined to uninstall and reinstall of HR to ensure that your connection is used with admin rights.

• Display of the error of period q, PA when create new project

  Hi all
  
  I am facing a problem when creating a project template, although I opened PA and GL class periods, but it is still showing following error of
  
  "Impossible to copy a budget for a period that is beyond the reach of the system defined periods (e.g. PA period or GL).
  
  Please help me solve this.
  
  Regads
  Madhu

  Hello

  I guess that your budget model has periods within the date range of the model project, between the start date and the completion date of the project.

  When you copy the template to create a new project, enter the start date of the new project as the start date of the model. If your start date of the project is different from the date of beginning of the model, the system will try more end date and also, try moving the fiscal years, for those who will canned the same length, but from the new project start date. In these cases you can either create budgets in other periods and then initial budget model.

  Dina

• Creating new project fails in operator ODI

  When you create a project, I get the following error, someone has seen this?
  
  java.lang.NullPointerException
  at com.sunopsis.dwg.DwgObject.computeNextId (DwgObject.java)
  at com.sunopsis.dwg.DwgObject.getNextId (DwgObject.java)
  at com.sunopsis.dwg.DwgObject.getNextId (DwgObject.java)
  at com.sunopsis.graphical.frame.b.it.cy (it.java)
  at com.sunopsis.graphical.frame.bp.cB (bp.java)
  at com.sunopsis.graphical.frame.bq.cB (bq.java)
  at com.sunopsis.graphical.frame.bp.bG (bp.java)
  at com.sunopsis.graphical.frame.b.it.bG (it.java)
  at com.sunopsis.graphical.frame.bo.q (bo.java)
  at com.sunopsis.graphical.frame.bo.t (bo.java)
  at com.sunopsis.graphical.frame.bo.f (bo.java)
  at com.sunopsis.graphical.frame.bo.z (bo.java)
  at com.sunopsis.graphical.frame.bo.c (bo.java)
  at com.sunopsis.graphical.frame.w.actionPerformed (w.java)
  at javax.swing.AbstractButton.fireActionPerformed (unknown Source)
  in javax.swing.AbstractButton$ ForwardActionEvents.actionPerformed (unknown Source)
  at javax.swing.DefaultButtonModel.fireActionPerformed (unknown Source)
  at javax.swing.DefaultButtonModel.setPressed (unknown Source)
  at javax.swing.plaf.basic.BasicButtonListener.mouseReleased (unknown Source)
  at java.awt.Component.processMouseEvent (unknown Source)
  at java.awt.Component.processEvent (unknown Source)
  at java.awt.Container.processEvent (unknown Source)
  at java.awt.Component.dispatchEventImpl (unknown Source)
  at java.awt.Container.dispatchEventImpl (unknown Source)
  at java.awt.Component.dispatchEvent (unknown Source)
  at java.awt.LightweightDispatcher.retargetMouseEvent (unknown Source)
  at java.awt.LightweightDispatcher.processMouseEvent (unknown Source)
  at java.awt.LightweightDispatcher.dispatchEvent (unknown Source)
  at java.awt.Container.dispatchEventImpl (unknown Source)
  at java.awt.Window.dispatchEventImpl (unknown Source)
  at java.awt.Component.dispatchEvent (unknown Source)
  at java.awt.EventQueue.dispatchEvent (unknown Source)
  at java.awt.EventDispatchThread.pumpOneEventForHierarchy (unknown Source)
  at java.awt.EventDispatchThread.pumpEventsForHierarchy (unknown Source)
  at java.awt.EventDispatchThread.pumpEvents (unknown Source)
  at java.awt.EventDispatchThread.pumpEvents (unknown Source)
  at java.awt.EventDispatchThread.run (unknown Source)

  Have you ever been able to create projects?

  Looks like it's having problems try to get the next sequence of the repository. You have made no changes to the database recently.

  see you soon
  James

• Create new project with old project vi

  So I have this 'project' I have worked since for quite awhile. I know I couldn't do it, but to save time, I reused a lot of code from the original project for a few other tests. So I just continued to add directories to this project.

  Now I need to take some of the best level vi and make a separate project, so I can store the source with the other files on our network in real engineering project folder.

  The high level vi is easy, but how do I make sure I get all down level vi and dependencies?

  I mean besides from the top level and moving it, then run to see what is missing?

  Is there an easy way?

  Use a 'Source' Distribution in the project that contains the high level of page VI (s) and configure it to "preserve the hiarchy."

  When the distribution the rest it will pick up the upper level screw and and all the screws under move them to the new location and link to point to the new location.

  Ben

• Windows 7 unable to create new folder on the desktop, the names are automatically names of birds, pigeon, hawk and Turkey

  someone had this problem and how to fix it?

  N ° hold it down. I bet you use a software called ALZip?
  If so, while the software is name these new folders with bird names...
  Read here: http://www.altools.com/Support/faq.aspx?&articleIdx=43&m=3

  Beep beep

• Impossible to find in the JDeveloper business rules when creating new project

  Hi all
  
  I'm in Chapter 9 creating a rule of Non - SOA Java EE Application for JDevloper 11 g. I'm following the instructions given in the chapter.
  However I can't find a category of business rules for the creation of a directory of business rules.
  
  It must probably be activated from a place.
  I tried to look for its meaning with JDev installation but do not have anything.
  
  However, it seems very basic level problem... Please let me know if anyone knows how to solve
  
  Thank you
  Haman.
  
  Published by: user11223806 on August 12, 2009 07:48

  Have you installed the extension of SOA for JDeveloper for help-> updates?

• When I create a new project, there is no project Panel.

  I don't know how to open or create a project Panel.

  How to open or create a project sign?

  How can I ensure that a project sign is created when I create new projects?

  Hi, matts7493369. Press window-> project or SHIFT + 1. You can create your own project defalt and save a copy of it every time that you start a new project.

• First Pro CC does not create a new sequence with a new project

  I'm sure I must be missing something, but when I create a new project in first Pro CC, it does not automatically create a new sequence.

  In CS6, create a new project would cause a list of sequence presets, and then create a sequence is empty for you.

  In CC, once you have created a project, you end up looking at an empty timeline.  You then go to the file, new, sequence and it do.

  Looks like a strange step to include, no?

  Is there a setting that I have not found so made CC to create new projects with a sequence like CS6?

  Yes, as Jim mentioned, there are other ways to create a sequence.  For example, simply import your video footage and then with a clip selected, choose file > New > sequence of the Clip.  Or in the project Panel, drag an item to a new item icon.  Much easier create the sequence of way, rather than by reading all the parameters in the dialog box new sequence and try to understand which attributes correspond to the media they work with.

• options of workflow while creating the new project type

  Hey Dina,
  
  I have a doubt on below 2 options that are available in the "Project status, Workflow" tab while creating a new project type.
  
  Activate the workflow for projects
  Activate the workflow for Budgets
  
  Could you explain what what will be the exact flow of two work above, impact if we allow them when creating new project type.
  
  Thanks in advance,
  RPD

  Hello

  These two options will affect any new project created using the type of project you are developing.
  For example, you create a project type called "Capital Construction Projects", designated for individual projects that will be created when your company began construction of a new factory or office, for its own operations.
  For this type of project, you can enable the flow of project work and budgets.

  Later business user creates a new project of this type, for the construction of offices for a new Department, he or she will submit the project for approval. By using the workflow your company would install rules so that system knows which should be the approver of this creation of project, or later, any change in the status of the project.
  Once that project was created the business user need to budget for the expected costs of this investment. Another workflow is now used to submit the budget for approval.

  If unnecessary business rules a formal process for approval of two state changes of project or the base line of the budget of the project, then you need not enable these options for the type of project.

  Dina