Error in Date / time SRW2008

Similar Questions

• conversion of the error of date / time when using easy excel reports

  I export a 2D array to an excel file using Excel reports easy vi. I have no problem with that. My data has a number of areas with different formats (text and date/time). My problem is the following:

  * some (in other words, not all data is in the same worksheet) the veiled values of date/time to mm/dd/yyyy format whereas they should be in mm/dd/yyyy (is the excel format it is y in!). Essentially, I have 30/09/2008 (September 30, 2008) in a cell. After ticks on Oct. 1, it will display the date as, 01/10/2008. Excel thinks that this date is in the format dd/mm/yyyy.

  This is a known error in earlier versions of Excel (2002), in particular when you convert a .csv, .xls file. The solution, it was not to add "Local: = True ' at the end of the vba command string (see here: MS Knowledge Base). Here, in LabView I'm not sure how to proceed.

  I tried to change the format of the column in question to the 'text' by calling an Excel Macro in LabView, but do you think I can find the vba command to do? No, not so much.

  LabView saves the Excel file in 97-2003 format (I use MSOffice 2007) and I wonder if the version they are using does not consider the time correction, as described in the knowledge base (or if it applies).

  Any suggestions, I'd love to hear from you.

  Kind regards

  David.

  Hi LaRisa,.

  I was able to find the cell Format Excel set vi and successfully change the format of the value of the cell. It wasn't until I had found the vi that I realized that I've been down this road before. Change the format after the table has been created does not change values dd and mm switching that has already occurred. However, if I did before I "created the table" (or vi Excel table) and set the format to be '@' then it displays the string like 'Text' in the Excel file. That's nice. I can control what cell, row, or column to format now. If I want to be in a date format then I must apply the Format of cell vi after the easy Excel table vi.

  It sounds like a stupid race around me...

• TDMS of MDF time stamp conversion error / storage date time change

  I fought it for a while, I thought I'd throw it out there...

  Let's say I have a file TDMS which has a channel of labview time stamp and thermocouple 2.

  

  I load in DIADEM, I get this:

  

  Perfect!  But now let's say I want to save the PDM as a MDF file so I can see him in Vector sofa.  I right click and save as MDF, perfect.  I started couch and get this:

  

  The year 2121, yes I take data on a star boat!  It seems to be taking the stamp of date/time storage TDMS as starting point and adding the TC_Timestamp channel.

  If I change the channel of TC_Timestamp to 1, 2, 3, 4, 5, 6, 7 etc... and save as MDF, I get this:

  

  Very close, 2012!   But what I really want is what to show of the time, it was recorded what would be the 10/09/2012.

  The problem is whenever I do like recording, date storage time is updated right now, then the MDF plugin seems to use it as a starting point.

  is it possible to stop this update in TIARA?

  

  Thank you

  Ben

  Hi Ben,

  You got it right that the MDF use written the time of storage to start MDF that is updated by DIAdem when writing time. We are working on this and will return to you, if there is no progress.

  To work around the problem, you can try convert TDMS MDF in LabVIEW storage vis.

  Something like the following, you can write your start time of measurement to the MDF file.

  

  Hope this helps,

  Mavis

• PSE8 error change date & time

  I scan in families a lot of old photos and then change the date to the date that the photo was taken, so it appears in the order in the Organizer. Since the upgrade to Win 7 64 bit, I get error takes most of the time when I try to change the date and time, but sometimes I get lucky and the change of date.  Sometimes in the catalog file is disassociated from the original. I also noticed that my trash has copies of failed attempts.  I tried PSE8 removing and reloading, but no change. Never a problem with PSE7.

  Did anyone else encounter this problem and, if so, found a solution.

  I have not seen this problem reported on these forums before, namely the intermittent behavior is very strange.

  Another assumption - try disabling the substantive activities of the PES to see if they're interfering (which could explain the intermitten behavior):

  -Autoanalyzer and face recognition: Edit > preferences > autoanalyzer Options > scan all media and recognize people automatically.  (It's a good idea to keep these off, for various reasons).

  -Watch service folder: in WIndows, start > administrative tools > Services.  Adobe Active File Monitor V8 right-click, select Properties, change the Startup Type to manual and click on stop.

• root properties in the connected data store: error when accessing the date/time storage

  When you browse the properties my connected data store I get an error message when you try to read the value of the property of 'storage date/time': object doesn't support this property or method.

  Here is a minimal example:

  Dim oMyDataStore, MyProperty, oMyProperties
  
  Set oMyDataStore = Navigator.ConnectDataStoreByParameter ("TOC", "" & "C:\Program Files (x 86) \National 2012\Examples\Data\Example_data.tdm" & "" ')
  
  Set oMyProperties = oMyDataStore.RootElements (1). Properties
  
  For each MyProperty in oMyProperties
  
    Call MsgBoxDisp ("property name:" & MyProperty.Name & + "\n"&"property value:" & MyProperty.Value "")
  
  Next

  Why can I not access this particular property by default?

  Hi Phex,

  for the date/time properties, an object called UsiTimeDisp is returned. This object allows to that extend features of service as access to each part separately (day, year, hour, seconds,...) of your date/time value. If you want to print the value of time with MessageBoxDisp, you can use the VariantDate this object property.

  Your code might look like this then:

  Dim oMyDataStore, MyProperty, oMyProperties
  
  Set oMyDataStore = Navigator.ConnectDataStoreByParameter ("TOC", "" & "C:\Program Files (x 86) \National 2012\Examples\Data\Example_data.tdm" & "" ')
  
  Set oMyProperties = oMyDataStore.RootElements (1). Properties
  
  For each MyProperty in oMyProperties
  
    MyProperty.DataType = eTime Then
  
      Call MsgBoxDisp ("property name:" & MyProperty.Name & + "\n"&"property value:" & MyProperty.Value. ' ") VariantDate)
  
    On the other
  
      Call MsgBoxDisp ("property name:" & MyProperty.Name & + "\n"&"property value:" & MyProperty.Value "")
  
    End If
  
  Next

  I hope this helps.

  Good day

  Eva

• Write the Date/time value to a Ms Access table

  I have a headache. Here is the statement I send and the error I get:

  INSERT INTO VALUES (TestID, DateTime) measure (8732, #' 2015 - 01 - 28 16:17:58 ' #);

  NI_Database_API.lvlib:conn Execute.vi-> 2.vi Untitled-> Untitled 1. VIADO error: 0x80040E14
  Exception occurred in the Microsoft JET Database Engine: syntax error in INSERT INTO statement. in NI_Database_API.lvlib:Conn Execute.vi-> 2.vi-> vi Untitled 1 Untitled.

  I tried most of the possible combinations of #, "," around the datetime string and I also tried datetime string formats YYYY/MM/DD hh: mmS AM/PM, DD/MM/YYYY "

  In writing to the other data fields don't cause any error, I only get the syntax error when I try to write in the DateTime field (data type Date/Type)

  I use LV2012 with database connectivity kit and MS Access 2010 (stuck with it, cannot be changed). Same problem with the connection of the user DSN or UDL (jet engine).

  It works with the DB tools Insert Data.vi but we want to use a direct INSERT statement using the DB tools run Query.vi, because we have had a few locks error 0 x 80004005 which can be caused by the DB tools Insert Data.vi using ADODB. Recordset.

  Is attached the vi that I use for debugging.

  Ben64

  Finally found the problem!

  Even if the data type is Date/time in Access, and it is possible to define the name of the DateTime field it seems to be a small Word when you use a SQL statement. The solution is to add DateTime hooks like this:

  INSERT the EXTENT (TestID, [DateTime]) VALUES (1,'2015-01-28 06:52:16 ');

  Thanks for your help Cosworth.

  Ben64

• CMOS Date/time not Set__CMOS Settings Wrong

  Hello

  I use Windows XP and Vista.

  When I turn on my computer, it displays the error message:

  CMOS Date/time not set

  Fault of CMOS settings

  How could I solve this problem without changing the motherboard?

  Replace the CMOS battery. It's cheap (~ $5.00) and easy. After replacing the battery, you will need to go into the BIOS to set the date and time.

  How to replace the CMOS in your PC battery -http://www.liverepair.com/encyclopedia/articles/cmosreplace.asp
  How to replace the CMOS battery - http://www.computerhope.com/issues/ch000239.htm

  MS - MVP - Elephant Boy computers - don't panic!

• How to connect a container ActiveX to a chain of Format Date/time control

  Hello

  I have an ActiveX container with the Date of Microsoft & Time inside selector object. I am trying to connect to control of the Format Date/time string. When I do that, it gives me an error saying: "You have connected a polymorphic terminal that cannot accept this type of data."

  What should I do?

  Kind regards.

  

  Is that what you want to do?

• time and Date/time in seconds

  Judging by some than others, it is a long-term problem.

  With the help of LV 8.6 incidentally.

  I'm trying to convert a date/time for LV timestamp format using the vi Date/time of seconds"." Recently converted time has been displayed as an hour before (I am in UK & DST is now in effect)-a problem I thought that I had healed.

  I wrote a simple test for the VI program (create a constant of the entry and use it to drive a bundle of cluster name to set s/hour/day/month/year etc.) With the function in a loop (0.5s) I have controls to change the month and isDST in the folder & isUTC in the function call - and displays the output in the form of stamp and as EXT. If the month is Pre-dst, everything is ok (for example, an hour of 10 stays at 10), if the month is 5 (DST) then the hour at 11 awards - unless isDST is set to 1 and isUTC set to false. but when this combination of controls is used with the months, a value of 2 - time becomes 9.

  As I say, I thought I had it healed and remember something on the Windows DST flag - and I had recently exchanged PCs - so I turned off the Windows DST (wDST) - no effect. This morning, I rebooted the PC to watch once again this program - to my astonishment, that the 'problem' had gone. I then checked the wDST it was always off. I stopped the criterion VI and closed and on wDST when you attempt to reload the VI of test I had a very weird error message telling me that my VI disk did not 'part of LV in memory' and inviting me to "come back". I stop LV completely rebooted and got the same effect. I restarted the PC and 'come back' was gone and the problem returns (wDST checked).

  So my initial dose had been disable wDST on my m/c origin.

  However, my query is what is the point of setting Date/time to seconds isUTC - it seems doing nothing like what he promises. What little LV blocks also on after I closed the program remember probably the DST Windows defining - maybe wrongly?

  
  

• I need to know the file current date/time number stamp and the version of "spoolsv.exe" in Vista Home Premium 32-bit with SP2.

  I need to know the file current date/time number stamp and the version of "spoolsv.exe" in Vista Home Premium 32-bit with SP2. My spooler file got corrupted and I need to know what that the stamp of date/time on the latest version of the file: spoolsv.exe. I did a search on my hard drive and found 8 copies of the file with 7 different dates. I need to know which copy in my file C:\windows\system32\. I suspect that the problem was caused by some kind of malware. I think that some of the different versions on my machine of the initial installation of the Vista, SP1 and SP2. 3 copies that would explain. I tried all the suggestions in this forum and several others. I tried sfc/scannow and it simply replaces the corrupted file by another. I understand how works this file and a simple copy will do the trick if I knew that the file to use. I know that I don't want to go back to the first version of 2006.  BTW... my symptoms are all my printers have disappeared, and when I try to 'add a new printer' I get an error message saying that my spooler service does not work. When I opened my services window it shows that indeed, he is arrested, but I will not start because the description column contains only the code garbled machine indicating that the file is corrupted, or it may contain a virus. I had been using F-Prot until this virus got by and now I use AVG. I scanned my machine with several cleaning packages and it is is more infected, but I worry that from this corrupt file grow something. I know that the problem is not with my printers or drivers, because everyone on my home network can print on all of my printers. None of the people I know are on Vista 32 bit. They are all running System 7 or XP. I have XP, except that a few years ago I suffered from the "Syndrome of Pepsi" on my laptop and when I bought a new HP, it came with Vista.

  Version 6.0.6002.18294

  Day 17/08/2010

  Duration 14:11

  Duration may vary in different time zones.

• Error message every time I try to update Java

  Original title: Java get error message every time I try to dl
  error message 1606 every time that I try to put up-to-date Java

  http://Java.com/en/download/FAQ/remove_olderversions.XML

  "Can I remove older versions and I need multiple versions of Java installed on my system?

  http://Java.com/en/download/Inc/windows_new_ie.jsp

  'Download Java for Windows'

  I hope that the information above to fix the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• When I try to download the update of windows I get an error code every time: 802440F.

  When I try to download the update of windows I get an error code every time: 802440F. Can you please help me solve this problem?

  @ Evanston only!...

  You see the effects of a hijackware infection! If you had used the computer longer, I might recommend trying to detect & remove infections. But it would probably take a week or two and I'm sure you have better to do with your time right now so I would recommend the following (which shouldn't take any more than two hours of uninterrupted time).

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Win7: see "using the custom installation and formatting the hard drive option" (or "reinstall it Windows 7") http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows-7 article

  NOTE: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install (AKA a "destructive recovery").

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  VERY IMPORTANT! -Online free trial Norton will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool again Norton before installing updates AND BEFORE installing your new application antivirus (for example, Avast5 or Microsoft Security Essentials, free).

  Tip: Do not install Spybot again; It's really overkill in Win7 my humble OPINION, especially if you are installing Microsoft Security Essentials.

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx
  http://www.us-cert.gov/CAs/tips/ST05-007.html

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/w7repair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Wish I had better news for you.  Good luck & achieve before Thanksgiving 2010!

• Behavior of the data import wizard when he meets a date/time field

  Hello

  Recently, I downloaded SqlDevelper 4.1.2.20 and used the wizard importing data for the first time.  In general, this has been a process easy and simple to use.

  I noticed a strange behaviour and I was wondering if that was seen by someone else.

  On importing data from an Excel worksheet, I met several fields with the date/time data,

  The Import Wizard is almost always empty the format field and showed in the "Columns of data sources" section this column and EACH column of data once it is in error.

  Once you get the correct format, I often found that I have to press the 'Back' button to clear the other columns of data to be deceived.   And, in some cases, I saw where the columns previously posted were then marked as error.

  Basically, anything after the column date corrected was wrong until an update of the "Source of data columns" has been done.

  If anyone else has noticed this?

  RandyN

  haven't noticed, does not mean that it is not a problem

  If you are an employee of the Oracle, send me an email with the details

  If you are not an employee of the oracle, email me anyway, with your sample excel worksheet and table DDL and I'll take a liquidator. Or open an SR with MOS (preferred)

• Date/time/web address stamp - printing problem

  My printer has always printed the stamp of date/time/site address when the Web well above the edges of the paper up to a month. Now print only about 1/5 of the line and is not readable... other 4/5 printing is above/below the edge of the paper down. I adjusted the margins and the header/footer settings and that did not solve the problem. Any help is appreciated. Have an officejet all-in-one 4620.

  I solved the problem myself... I printed some photos and on properties that I chose without borders, as opposed to (default) border... by trial and error, I found that it was the problem. When I chose with border, the info will print correctly.

• Start ERROR-OGG-00685 time: extract process abending

  Hi gurus,
  
  I have installed Oracle Golden Gate in the slot environment. But failed to start the extraction process, I'm newer to its installation production and Ogg.
  
  Main site (source): it is production DB up and running.
  
  RAC 2 nodes
  Oracle RAC 11.2.0.1.0
  ASM
  
  Oracle GoldenGate 11g Release 1 (11.1.1.0.0)
  
  Enterprise Linux Server version 5.5 (Carthage)
  X 64 processor type
  64-bit operating system
  
  target Site (destination):
  
  Single stand-alone server - no CARS
  Version 11.2.0.1.0 Oracle
  ASM
  
  Oracle GoldenGate 11g Release 1 (11.1.1.0.0)
  
  Enterprise Linux Server version 5.5 (Carthage)
  X 64 processor type
  64-bit operating system
  
  Error is as below:
  

  2012-08-12 22:57:09  ERROR   OGG-00685  begin time May 1, 2011 11:06:53 AM prior to oldest log in log 
  
  2012-08-12 22:57:09  ERROR   OGG-01668  PROCESS ABENDING. 

  Please suggest, I'm stuck
  
  Thank you
  
  Published by: user13403707 on August 16, 2012 09:07

  ggsci > urban alter now

  Or explicitly specify a date time:
  ggsci > urban alter start 2012-08-13 12:00

  I also noticed that this line:
  table urbanlive.*

  Missing the semi colon closing. It should be:
  table urbanlive.*.

  Make sure you read on current transactions. This is important when you START capturing change data and perform the initial synchronization. If you do not understand this won't boot you properly and you will be always out of sync.

  Good luck
  -joe