Error in exe file

Similar Questions

• Subvis call go dynamically within an exe file (avoiding the error 1003)

  Hello

  I use an architecture where the main program (compiled into an exe) can be supplied with a user-'plugins', which are collections of screw types inside a folder named especially compared to the exe. They can be called in the exe via 'open reference vi' provided by the corresponding strict vi types and corresponding relative paths.

  I want to avoid having to include one of the plugins in some way in the application builder, because users must be able to create own plugins that the request is totally ignore during the generation.

  In principle, this approach works rather well, since these plugins are not extremely complex, but sometimes, I get an error 1003 when loading a plugin.

  I have read many old posts on this error in this particular situation, mainly using versions of LV 7 or 8 (I use 2012). It was suggested to build a source distribution for each plugin, including everything that is used from vi.lib, instr.lib and user.lib. Indeed, it helped in my particular case - however, it bloats the plugin 'distribution' (which consists originally only a couple of the screws of the user) extremely and complicates the development user side.

  Now some good plugins run from in the exe without having to build a distribution source for them (they still use many vi.lib live) while others don't, and I have no idea why...

  These plugins are wrappers for hardware drivers that allow to control any hardware instrument within the main application via a certain API. So, in a particular case, a plugin that produces the error 1003 uses VISA series features (everything inside... \vi.lib\Instr\_visa.llb) and one without error doesn't (yet he uses several features of... \vi.lib\Utility\...).

  I can solve VISA problems in a simple way by including (only) the VISA-vis opportunity (and typedefs) inside the plugin folder and explicitly link to them (i.e. replace the VISA-vis of vi.lib with those copied to the folder of the plugin - I guess that's also what the source distribution).

  However, I'm confused why certain plugins with work of related vi.lib while others screws produce an error 1003 unless these special screws are explicitly distributed and connected with them...

  Oh and just for completeness: all plugins are working fine if the callee in the development system, the problem occurs only if called from an exe file.

  Novgorod wrote:

  However, I'm confused why certain plugins with work of related vi.lib while others screws produce an error 1003 unless these special screws are explicitly distributed and connected with them...

  Oh and just for completeness: all plugins are working fine if the callee in the development system, the problem occurs only if called from an exe file.

  Do plug-ins that work depend on the screw in vi.lib who are already part of your executable file because the main program uses these same screws?

  All the screws that your plugin needs must be available, if applicable can mean to be already loaded into memory (for the main of the application or another plugin), or can be found on the disk and load.  An executable includes all the screws of vi.lib - it includes only those he uses (and the screws that are marked always 'include' in the build specification).  I suspect that the plugins that work only dependent vi.lib screws which are also used by the main executable file.

• Executing an .exe file indicating "Access denied in command prompt" and a pop up with message error "this application can run on your pc.

  Hello team,

  I have a c# console application (EX: Utility.exe) who was once fully functional in windows server 2012 since last year 1. but for a few days while running display of the 'access denied' prompt in the command prompt and a pop up with message

  "This application can run on your pc to find a version for the control of your pc with the software publisher. I am not able to understand why I get this weird error. Other exe files works quite well in the command prompt. below is the screenshot for reference. If everyone is facing the same kind of issues before please answer quickly. are

  Hello

  You may need to ask the question on the TechNet forums:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserver8gen

  Concerning

• said notice of the error runtime error, c:/program files/internet explore .exe - WHAT DO I DO to CORECT THIS I AM OBLIGED to GRT out of WHAT I DO.

  NOTICE OF THE ERROR SAYS - RUNTIME ERROR, C:/PROGRAM FILES/INTERNET EXPLORER. EXE - WHAT TO DO TO CORRECT THIS, I AM FORCED TO SHUT DOWN WHAT I DO

  Hi louglat,

  (1) when exactly you get the error message?

  (2) what is the version of the operating system that you are using?

  If you use Windows Vista or Windows 7, I suggest go you to the link below and run the fix and that might take care of the issue.

  http://support.Microsoft.com/kb/822521

  Let us know if the problem is not resolved or for any other help.

  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error message "Windows cannot open this file" for all .exe files.

  I have talked with agents of cat and directly by e-mail to a person called Betty to and followed the steps all the recommended without correcting this problem. I can only run a .exe file in a folder. Any attempt to run an exe from Windows XP - Pro results in a box with the above mentioned error. He also said "to open this file, Windows needs to know what kind of program created." It is now more than a month to get this resolved. It only allows me to easily perform some maintenance and even investigations when necessary. This is the only problem I have with my system. I used AVG 2011 to clean my system to any virus or Trojan horse, and he pointed out that there is no intrusion. This sounds like there should be a simple solution because nothing else is affected. I am very frustrated not to find a solution after such a long time.

  Stan Hart

  If you are sure that your system is clean of any virus and you have tried the steps mentioned to restore registry and still not be able to open any exe file you can try the method below:

  "12 EXE (lnk and regfile) difficulty for Windows XP" http://www.kellys-korner-xp.com/xp_tweaks.htm.

  I hope this helps.

• Why Windows XP Professional give me error messages 'Bad Image'? With reference to dll32.exe files.

  Why Windows XP Professional give me error messages 'Bad Image'?

  With reference to dll32.exe files.
  \Windows\system32\MSACM32.dll is not a valid system image. Please check this against your installation diskette.
  Other messages relate to the specific 32dll.exe of the application
  It seems to me that the msacm32.dll talk of restore point for system restore.
  Thank you
  Greg

  Hello

  1. What is the number of brand and model of the computer?

  2. you remember recent changes made on the computer before the sissue?

  3. What is the service pack installed?

  4. do you have the Windows XP disc?

  Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

• I can't open any .exe (including regedit.exe) file - if I try to open any program, I gives me an error that the application is not found.

  I can not open all .exe files, including regedit.exe cited as a means to correct this type of error.  If I try to open any program gives me an error that there are no application or the 'Open with' window opens asking me to choose my program.  However, I can open the Word Document, although if I try to click on any shortcut to Microsoft Word it says application is not found.

  I had a virus on my PC and used Malwarebytes to remove it.  The deletion was successful, but he seems to have created this new problem.  I don't know if it is directly related to the kidnapping, or whether the virus changed anything while he was active?

  Thanks for your help.  :)

  Your ".exe" file association is probably damaged.
  To fix it, follow the instructions on this page for the attachment of .exe file associations.  Be sure to read the note at the top of the page specifically about the special considerations to fix .exe associations.

  'Windows XP file Association problems'
    <>http://www.dougknox.com/XP/file_assoc.htm >

  HTH,
  JW

• In XP error message - unable to locate the RUNdll.exe file when trying to open Microsoft files.

  Original title: just had a fight with the virus 'Windows XP security 2011.

  I am running Windows XP Home Edition and managed to get rid of the virus, but now I can't open any microsoft file. that is, control or any downloaded files Ms. I get an error message that it can't locat the RUNdll.exe file. How to solve this?

  Thank you aleweeks

  If sfc/scannow solves your problems, I'll send you (or your charitable organization preferred) $10 American.

  This isn't the answer.  ---> pay attention -------------------------------------------->

  It's time to mark the answer but:

  This "response" meets or exceeds the requirements of Microsoft Answers forum for an "automatic response":

  1. support the answer of engineer or a moderator that is impossible, probably not or will not solve the problem
  2. marked as the answer by a comrade moderator
  3 contains a link to one or more Microsoft KB articles
  4. no activity for 5-10 days

• I get an error hpqtra08.exe - corrupted file

  I get an error hpqtra08.exe - corrupted file, file or directoryc:\users\melinda\appdata\local\temp\redboxlog.txt is damaged and unreadable. Please run the chkdsk utility.  I tried to get him out of the guest of execution but it tells me that my access is denied because I don't have sufficient privileges. you have to invoke this utility running in elevated mode?  I'm ADMIS from my computer?  any help :)

  Hello

  Right-click on "Command prompt" and select "Run as Administrator".

  "How to open a high in Vista command prompt"

  http://www.Vistax64.com/tutorials/181765-elevated-command-prompt.html

  Here's how:

  1. open the Start Menu.

  2 click on all programs and Accessories.

  3 right click on command prompt , and then click run as administrator.

  4 click on continue in the UAC prompt.

   

  And this tutorial will help you.

  "How to run the check disk at startup in Vista or Windows 7"

  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  See you soon.

• Cannot open .exe files. I get the error message by side configuration is incorrect. Event log contains contradictory elements.

  Please help me!

  I have HP Windows Vista Home Basic 32-bit. Cannot open .exe files. I get the error message by side configuration is incorrect. In the event log, it says error in manifest or policy file as a component version required by the application in conflict with one another component version already active. The two components are: c: Program Files\Viewer\Microsoft.VC80.CRT.MANIFEST.

  Problems arise when I deleted some files (don't remember which) I am now myself for kicks. Then I completely restored my system with a restore cd, upgrading to vista, downloaded all the updates and everything else works fine only problem is the opening of .exe files. Can someone please help? I'm no computer wiz only right following the indications :)

  Thank you.

  Hello

  Follow these methods and see if the problem still occurs.

  Method 1:

   

  Scan an System File Checker (SFC) on your computer and see if that fixes the problem.

  Method 2:

  Test the issue in a clean boot State.

  Note: follow step 7 to your computer as usual.

  Method 3:

  Follow the steps in this link as well.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/the-application-has-failed-to-start-because-its/c4a7c2ba-C7CD-41cb-a7ff-9fedafaf33a7?tab=MoreHelp

• Try to run programs .exe produces the error message "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. "

  Hi all

  Help needed please.

  HP dx2250 microtower, running Windows Vista Home Basic Edition, recently attacked by Vista Antispyware 2010. Norton 360 V3 dealt with rather late the virus, but the fall of the remains.

  I am unable to open any .exe file (program) on the desktop, start menu, or through the browser. I can access the programs in opening a data file, for example, double-click a .doc file opens MS Word, etc.

  The error message "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. "

  I tried an automated solution that is available via the forums (exefix_cu.reg) and also a manual suggestion to change the registry, also available through the forum.

  I also splashed by and purchased Regcure, who seems to have done no difference despite who claims to have removed 1500 odd errors. So I'll be request the refund on that one.

  I scanned the forums and found a large number of similar problems, but not one that is as complete as this.

  Any help much appreciated

  Hi all

  Thanks to anyone who has seen this link and made suggestions.

  I was looking at a similar, and is other problems came up with this very useful link, I am grateful to say has solved the problem.

  Sorry MapDrummer, but I'm not sure if it works for XP

  Follow this link to SpiritX who has the answer

  Hi Justalilkink,

  See also the post made by SpiritX on January 24, 2010 17:32 in the link http://social.answers.microsoft.com/Forums/en/vistafiles/thread/086ab3bb-d764-4fb1-a6f3-205bff708e63

  Thank you very much

• "not a win32 application valid" I see this error for most .exe files

  I used win7 evaluation copy (x 86). Then I format my laptop with the ultimate win7 (x 64). But now when I try to set up a file, it gives the error: "... not a valid win32 application." some of the extension .exe files work fine, but mainly I struggle with .exe files. And sometimes, there is also a CRC error occurs.

  I try to format it again with my old vista(x86) recovery cd but I have seen the same problem. and then I tried win7 x 64 again. but there is always the same problem. I also tried to download the files that I wanted in the Setup program, but it does not solve the problems.

  How should I know?

  Irmakkk,

  Please see the thread next where the same question has been answered:

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/589c0300-95f5-48e3-98AB-4342a30cc1e1

  I hope this helps!

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 0xc0000906 when you try to run .exe files.

  Original title: 0xc0000906

  I was installing a software on my laptop running windows 8, and all of a sudden the battery has failed.

  Since then, I ' ve been unable to carry out most of the .exe files.
  I end up getting an error saying request "the application could not start properly (0xc0000906). Click OK to close the application. ' or 'Windows cannot access the specified device, path or file. May not permissions to access you the item"pretty much whenever I try to run an application.
  Can't install anything on my PC...
  Please help me as soon as possible.
  Malice.

  He solved.

  My AV started sandbox everything and so the problems.
  I suspect that there is a corruption while I was updating of the VA.
  Disabled it and everything is back to normal.

• I used to be able to download email .exe files in Adobe Acrobat Reader, but now it gives me an error message and won't let me download?

  I used to be able to download my gmail account .exe files in Adobe Acrobat Reader to be downloaded in PDF format for the work, but now it gives me an error message and don't open them in Adobe. I didn't something different to my internet browser, or Adobe, so I don't know what is the issue. All solutions?

  Acrobat Reader cannot open. Files to ESX.

• I get the 'BAD IMAGE' when many *.exe files is available. The error image refers to "BROWSE ~ .dll." What is the correct file name?

  When I type (OK) the computer continues to the application, I entered, but there may be a range
  in the opinion of the 'BAD IMAGE' with various. EXE files. Somehow gotten past as the correct file name cut short
  what he should ever TRAVEL ~ .dll. I can rename it leaving out the "~" symbol, but I don't know what to rename it.
  Help?

  Hello

  It would be useful to the Windows OS is supported .