Qosmio G40 - no sound on HDMI

I can't get sound on my LCD TV connected with cable HDMI with my Qosmio G40. Help please.

Hello

I found a very interesting document from Toshiba which provides a step by step instruction how connect a Qosmio G30 to a TV using the HDMI port and why there is no audio over HDMI on Qosmio G30 under Vista.

[No audio over HDMI on Qosmio G30 under Vista. | http://APS2.Toshiba-tro.de/KB0/FAQ7A01ZU0005R01.htm]

_The paper said: _

(1) open the "Control Panel" to click 'Start'-> 'Settings'-> 'Control Panel '.
2) click on 'Hardware & Sound.
(3) left-click on "his".
(4) a window appears where you can select the playback device. Left click on 'device of digital output (S/PDIF).
(5) after selecting the digital output, click on 'Set as default', then 'apply '.
(6) now the signal must be properly transferred correctly to HDMI.

Check this box:
1. fix a television for the Qosmio G40 HDMI while both units are State in a "powered off the coast.
2. turn first on television and then the Qosmio G40.

_Notes on the HDMI connection: _

S ' Please refer always to the manual of your TV on how to select and activate the TVs HDMI input port.
-Please ensure that TVs equipped with a HDMI input port can be connected to the computer.
S ' Please use a HDMI cable (NOT supplied with the computer) commercially available to connect to the TV and the computer.
-Not all TVs equipped with a HDMI input port have been tested for compatibility with the computer. Therefore, does not guarantee that the HD DVD-video content can be displayed on any TV with an HDMI input port. Contents of the DVD - video HD may not display correctly on some TVs.
-Qosmio G40 should automatically detect the HDMI connection and video output can be seen via HDMI to the TV.

Good bye

Tags: Toshiba

Similar Questions

  • Qosmio G50 not sound on HDMI

    * Qosmio G50 not sound on HDMI *.

    Hi all

    I hope everyone recognizes the following and would be kind enough to help me. I searched the forum and tried several of the solutions proposed mainly apply to Vista, but still.

    I hooked up my Qosmio G50 to my Philips LCD HDMI cable. Picture is ok, but there is no sound. I tested the cable with a Toshiba Satellite Pro L550 and it works allright. Image and sound work. But this laptop has Intel HDMI audio.

    I am Windows 7 Home Premium 64 bit slot. I improved by upgrading Toshiba DVD of Vista 64-bit. Unfortunately I do not know with certainty if the HDMI audio worked before that. I think so because I used the laptop to watch a movie on a Panasonic plasma. But I don't remember if it was before or after the upgrade.

    Realtek HD Audio device is installed driver version 6.0.1.5923
    Realtek HDMI Output is selected as default playback device.
    Test gives me graphic response (flashing) but no sound from my TV.
    Choose the other audio device Realtek Digital output doesn't change anything and I do not think it would work anyway.
    I tried to remove the device and then reinstalling the original drivers. I tried the REaltek drivers on their site.
    I tried to change the HDMI view only but what does nog change anything either.

    One thing that worries me is that, under his / Realtek HDMI Output / Properties / he supported Formats are no current format. The satellite gives me audio DTS and others. So I wonder if there should be present formats and if so, how can I change that / add a few.

    Please forgive me if there are mistakes in the text. I translate this to a Dutch version of Windows 7.

    Please help me. All suggestions are welcome!

    I found an article of * Support technique Toshiba * but for Qosmio G30. You must set a default to playback HDMI device

    http://APS2.toshiba-tro.de/KB0/TSB9401B00001R01.htm

    Perhaps, it allows you to...

  • QOSMIO G30 - no sound on HDMI when connected to HDTV in XP MCE.

    Hello-

    Can anyone help with a frustrating problem... How output sound on HDMI in Windows XP MCE?

    I place the video on HDMI output using * Fn + F5 *-I get a perfect image on my HD TV. However, the sound always comes from my laptop speakers.
    I have all the latest drivers and BIOS downloaded from the Toshiba site.
    I entered the settings audio and Sigmatel and tried everything, in particular by unchecking + 'Activate Dolby Digital Live Support' + within the Dolby tab which is recommended in a support forum.
    Nothing works!

    It's relatively easy in Windows Vista, because you can change the audio device by default for + the device of digital output (S/PDIF) + and which switches to HDMI audio, but there is no option under XP MCE.

    Someone who can help to solve this problem is rewarded with all the points and have total gratitude and respect :-)

    Thank you

    Mark

    It is a Toshiba FAQ:
    + No signal on HDMI on Qosmio G30 under Vista +.
    http://APS2.toshiba-tro.de/KB0/FAQ7A01ZU0005R01.htm

    But he of described the problem with Vista OS.

    However, the screenshot shows the codec high definition audio Sigmatel.
    I guess it is the same device that you can see in the menu drop-down

    Maybe you have to activate it.

  • Qosmio G40: No sound on Windows Media player in Vista

    Hi, last week or so the sound has disappeared on my Windows Media Player but only on my Tv Tuner and DVD, the files from the hard drive are not affected. Everything was ok at first but now he even sound start.

    I tried to set up etc, but still no joy?

    The tv on the meter d tuner works very well but has limited options. Is there anything else I can do or try and if not is there any other program that I can use my tv tuner on where I can record etc?

    Thanks, I'm running Windows Vista on a Qosmio G40

    Hi guys

    You should take the recovery disc and needs to be reinstalled the operating system of the provided Toshiba DVD.
    Then visit the Toshiba European page and update the TV tuner and the audio driver.

    Expected to help with this problem

  • Qosmio G30 - no sound on HDMI output

    Hello world.

    I read a lot of documents in this forum about my problem but no solution now.

    I have connected my Qosmio G30-155 (windows vista ultimate) to a full HD Samsung tv with an hdmi cable and the video is fine, but no sound. The sound is in the laptop speakers.

    I have the latest drivers: sigma - 6.10.5462.0

    TV works fine with DVD through HDMI recorder.

    Any idea?

    Thanks in advance.

    Hello

    Did you also check Bulletin for technical support with title cannot hear audio through a HDMI connection on a Qosmio G30 in Windows Vista?

  • Qosmio G30: No sound via HDMI after installation of Vista

    Hello..
    After installing Vista on my G30 HD DVD I have no sound on any application via a HDMI cable. Sound works fine on the internal speakers. He also worked very well under XP. Can anyone help?

    Hello

    The noise does not appear on the external HD TV which was connected to the Qosmio G30 via an HDMI cable. But the internal speakers work. Am I wrong?

    Buddy you check the sound options in the control panel?
    Check if all controls are set at a higher level and are not disabled!

  • Qosmio G30 - no sound output HDMI with Plasma

    Hello

    I tried to coonect my g30 with a Plasma TV, I get that video without sound

    I changed my defult for digital output device (SPDIF Out) device, but it did not help

    I don't have that in playback devices is:
    Speakers / headphones
    Digital output device (SPDIF)

    Help, please

    Hello

    I don't know what Qosmio G30 exactly do you have and what operating system is preinstalled but maybe that this document can help you:
    http://APS2.toshiba-tro.de/KB0/TSB9401B00001R01.htm

    Check it out!

  • No output from HD on HDMI out port on Qosmio G40

    I read the DVD HD guide of my Qosmio G40 "only the computer display panel supports display with treatment high definition. When playback on a TV connected to the computer, the screen on television will be only ordinay screen and not display with high definition treatment. ».

    I don't know if I understand the manual right. He says that I can't view HD DVD HD videos on a TV even if it is connected with HDMI output port? If this is really the case, where HD to HDMI?

    I am very disappointed in this respect. Or I don't interpred bad manual?

    Hello

    I think you have misunderstood something.
    If you will connect Full-HD TV via a HDMI cable to the laptop, you should be able to watch HD-DVD in HD movies.

    But due to technical limitations, HD-DVD can only be looked at on a device at the same time. To read HD - DVD on both devices at the same time is not supported.

    Because of the important data stream when a HD-DVD is read, the machine can manage only a HD signal. If two devices have been accessed at the same time, the machine must manage two signals HD, which is not supported due to the technical limitations of the machine itself.

    Therefore, it is possible view a HD-DVD on a single device at the same time. This restriction is valid only for the HD-DVD playback. The normal clone mode is not affected.

    So you can choose between the laptop or TV, but not the two screens together

    concerning

  • HDMI output on Qosmio G40 - horizontal line on the screen

    I connect my Qosmio G40 to an 46F86BDX of Samsung LCD via HDMI. On all my films, when there is a shift, I see a horizontal line on the screen. Sometimes is in the middle of the screen, sometimes lower.

    I tried my pc with another TV and a different cable, but the same problem. Someone knows the same thing?

    Thanx

    Hello

    > On all my films, when there is a shift, I see a horizontal line on the screen.

    If I understand issue you this horizontal line appears ONLY on and external TV and ONLY if there is some faster movements of the pic.

    If so, then I think it has nothing to do with G40 Notepad.
    I have read that those issues could be related to the new TVs LCD then to watch movies in high definition.

    I think you should read a few tests and reports on similar issues on LCD TVs

    See you soon

  • Qosmio G40: Vista Ultimate - control buttons do not work properly

    Hello friends,

    I have a Qosmio G40 for a few months and everything works well until now.
    The problem is related to the front control panel.

    If I use Windows Media Player, PLAY/STOP/PAUSE/FORWARD/BACKWARD buttons work well, but if I try to use the other buttons like REC (in any case) or turning on LEDS or DOLBY, the button makes the usual sound, but nothing happens, does not open any program that is supposed to open.

    Does anyone have an idea why this is happening. I tried to look for any software configuration of these buttons but can't seem to find.

    My system is Windows Vista Ultimate Edition.

    Best regards
    Ricardo Monteiro

    Hello

    The European driver Toshiba page provides the AV controller Manager
    This tool allows you to customize and TOSHIBA AV Control button preset settings.

    Maybe you should install this tool and it should check again.

    In addition, it would be advisable to reinstall the VAP

    Check it out!

  • Qosmio G40 Windows XP - some drivers/utilities missing

    Dear all,

    I would be grateful if anyone can tell where I can get drivers/utilities for Windows XP for the following:
    -Flash cards (to make the combinations of work: switch between monitors, brightness, ets);
    -Shortcut keys on the keyboard {eleven buttons}.

    All the other drivers/utilities have been found/installed/proved to work correctly. XP seems to work a lot smoother and faster on this beautiful piece of hardware.

    Thank you for your help,
    Kind regards

    The utility of flash cards is only available for Vista.

    I looked on the page of the Toshiba driver and, unfortunately, but I didn t see the XP drivers for the Qosmio G40 at this time.
    I assume that you've found the XP drivers some currents such as graphics card or driver sound on 3 third-party pages. But to use the features of Toshiba as button of keyboard shortcuts, you will need a XP driver and tool designed especially for this laptop.

    Looks like the drivers are not available at this time and we will have to wait until XP drivers will be sorry, but I really put t see another possibility.

    Best regards dude

  • Qosmio G40 - how to monitor audio input?

    I installed Adobe Audition on my Qosmio G40 but were unable to control sound input or get audition to record. (It used to work fine on my xp pc) I was able to record sounds, but he can't listen to as his '' go. '' I also tried to install an external sound card: CREATIVE EXTIGY but can't get the laptop to recognize that it is installed.

    EXTIGY can work with my laptop?

    How to monitor input sound?

    His card is Realtek

    Advice welcome.
    Sean.

    Hello

    Have you checked the Realtek HD Audio Manager in the control panel?
    To do this.

    On the right, you will find the analog ports, internal speakers and mic and digital.

    Unfortunately, I m not a Qosmio G40 owner but I have a Satellite phone with Realtek audio chip and in my case the audio HD Manager provides some settings that can be changed.

    Must check and play with it.

  • Qosmio G40 - Interntet browsers don't show any music, flash, photos

    Hi all

    I have a problem with the internet

    My browser cannot display any video, music, flash, etc...

    I tried a lot of browsers such as: Firefox, google chrome, opera, IE... etc and the result has been one
    I tried another user but the result was one too many.

    No image or flash or text only of the thing.

    Please help me out

    And this photo for my problem

    http://www.Zerovb.com/ZUP//uploads/images/Zerovb-23db23400a.jpg

    My Notebook: Tosiba Qosmio G40
    OS: Microsoft Windows Vista Ultimae / SP2

    Thank you all

    Hmm, it sounds to me like something on your laptop would prevent the Add-ons like flash image to display in the window of the Web browser.
    I doubt that the only browser settings cause this because this problem occurs with different browsers.
    So I guess that a firewall or security tool that is installed on your laptop causes this

    You are using a firewall or use such tools 3rd party who would be responsible for this issue?

  • Qosmio G40 has a problem with HDDVD

    Hello
    I just bought Qosmio g40 laptop friendly, but I can't watch HD DVD movies on it.
    Sound film accidents so update bios Drivers for graphics card, reader HDDVD Toshiba but which makes no changes.

    I don't know where to go and how to solve the problem of last Samurai THAT HDDVD does not play.

    Can anyone help?

    Check this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=28538

    Possibilities are the HD DVD firmware update or the update of the HD DVD player

  • Qosmio G40 - not more healthy with the last driver audio Realtek

    Hi all!

    Whenever I have install the latest audio driver Realtek 6.1.0.53.97 on my Qosmio G40 (Vista), the sound not work more (not at all) so I don't have to return to the previous version.

    Has anyone noticed this problem or has an explanation?

    Thank you.

    Louglitou.

    Hello

    It's not easy to say why you n t get the noise after the update of the audio driver, but in my view, this problem may appear if a problem occurs during the installation/update procedure.
    But I have two questions;
    Why do you want to update the audio driver? You have sound problems?
    I think that if your sound is ok so an update is not necessary, I noticed that the Realtek audio drivers are updated from time to time. My audio driver is about 3 years old and I didn't update because it works very well.

    Best regards

Maybe you are looking for