Error 0xc0000906 when you try to run .exe files.

Similar Questions

• 5 error message when you try to run gimp - 2.18.16 - Setup could not create the directory

  5 error message when you try to run setup.exe gimp - 2.18.16 after downloading... it reads:
  Setup could not create the directory
  c:\Users\DEBSWO~1\AppDate\Local\Temp\is-IKDP5.tmp ".
  Error5: Access denied
  In the Temp folder under Security I have:
  'SYSTEM' with full control
  "Administrators" with full control
  "Username" with full control
  All of which is listed in the permissions, but the box for'Include the permissions that can be inherited from the parent to this object "below is checked but not really dim so that you cannot check or uncheck the box?"
  The two latest downloads gave the same error message.

  Thank you for your time.
  Debbie

  I suggest you do this:

  1. click on the start planet.
  2. type cmd.exe in the search box.
  3. press on Ctrl + Shift + Enter
  4. click on "run as Administrator".
  5. type the following commands exactly and press ENTER after each:
  takeown /f "%Temp%" / r

  Cacls "%Temp%" / t/c/g "%nom user %": F System: F

  (Enter Y when you are prompted "Are you sure?")

• 8024A 000 error code when you try to run Windows Update on Vista 32-bit

  I get the above error when you try to run Windows Update on Vista 32 bit.

  I use an Asus laptop and have used the Asus recovery cd.
  I just replaced the old HD (500 gb) as it failed with a 750 GB HD.
  I tried the SP1 upgrade to SP2 and this causes a "catastrophic failure".
  Any help would be greatly appreciated.
  Thank you
  Sam

  Thanks for the support. I got the Asus machine this morning and they have corrected the problem in a few minutes by running a short script. In my view, that it is a common problem with Asus and Western Digital HD. Anyway congratulations to Asus. Here, after the service is impressive.

  See you soon
  Sam

• I downloaded creative cloud, Dreamweaver and Muse.  I get the following error message when you try to run Dreamweaver: '... Unable to start properly.  0xc000007b'. Muse started ok.

  I downloaded creative testing Cloud, Dreamweaver and Muse.  I get the following error message when you try to start the Dreamweaver application '... Unable to start properly.  0xc000007b'. Muse starts without a problem.  Is there something wrong with the download trial of Dreamweaver or is it my computer?  I downloaded the Windows 7 premium, Intel, processor Pentium B940 2.0 ghz, 4 GB ram, 64-bit operating system.

  ... 07 b problems http://forums.adobe.com/thread/1355374?tstart=0

• Process Explorer error BES when you try to browse the files and folders; and Internet Explore AppHangB1 when you try to attach files to download in Windows 7.

  Hi everyone, auggy,

  I really hope you can help me with a problem I have on a single workstation at my office.  It is an accumulation of 32-bit Windows 7 running MS Office 2010 Standard.  It differs from other generations in our office because it is used by the head of the team of our accounts, and so it has a number of custom pieces of software that she only needs access (payroll software, etc.).

  All the basic features of the computers seem to be well, except the two following, and I would really like to help get to the bottom of it.

  (1) process explorer error when you try to browse the files and folders of BES.

  I can call Windows Explorer absolutely perfect and be sailing away on his machine, and then suddenly the process explore will die, with the following error: -.

  Signature of the problem:

  Problem event name: BEX

  Application name: explorer.exe

  Application version: 6.1.7601.17567

  Application timestamp: 4d6727a7

  Fault Module name: StackHash_0a9e

  Fault Module Version: 0.0.0.0

  Fault Module Timestamp: 00000000

  Exception offset: 03e2f944

  Exception code: c0000005

  Exception data: 00000008

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 2057

  Additional information 1: 0a9e

  More information 2: 0a9e372d3b4ad19135b953a78882e789

  Additional information 3: 0a9e

  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  Read our privacy statement online:

   http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  I can start windows Explorer, and it will happen again--it's a repetitive event.

  (2) Internet Explorer AppHangB1 when you try to attach files to download

  I think that these two errors may actually be related, like IE (and Chrome as well by the way, this be why I think that the two issues are related) works fine, until I just any type of site where I need to download a file.  This happened in the light, as our Chief of accounts needs to download a flat file in a room online banking software.  What's going to happen (and, again, this can be repeated as needed) is: -.

  (a) you need to click on which will generally be a "Browse" button

  (b) a traditional dialog box opens, but instead which allows you to navigate to the location and select the folder you want, he immediately greys out as if the process explore is falling.

  (c) shortly after, the following error is returned: -.

  Description:

  A problem caused this program blocking interact with Windows.

  Signature of the problem:

  Problem event name: AppHangB1

  Application name: iexplore.exe

  Application version: 11.0.9600.16521

  Application timestamp: 53114399

  Hang Signature: ffae

  Hang Type:                                          513

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 2057

  Signing of additional blocking 1: ffaeadd6649c2780023c6d9ea230850d

  Signing of additional blocking 2: e32d

  Signing of additional blocking 3: e32d1064528f9bd1cbe46cdd0db7b0f1

  Signature of blocking additional 4:0498

  Signing of additional blocking 5: 0498e046eb6db4d68a7cd9b11dab2644

  Signing of additional blocking 6: effb

  Signing of additional blocking 7: effb796b5c1ff7f6708d2722fa7c24bd

  Read our privacy statement online:

   http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  On auggy recommendation, I've set up a registry key insert that returns the explorer.exe hangs in a dump file, and I am trying to load two reports on SkyDrive - I'll post the URL in this thread as soon as I finished it.

  Can someone help me please?

  Thank you very much!!

  David.

  Hi auggy, Andy,.

  Well... in a way, I am very disappointed, but we will respond to it.

  Andy, I checked and iCloud, Control Panel has not been installed on its terminal, but thank you very much for suggesting it :)

  auggi, when I got back on my colleague's PC, I thought I would test to see if the feature didn't always before considering saving data dumps etc, and it worked fine!

  I left it overnight with instructions for the lady who uses the PC to test this morning and see if it's all workers, and it is still, it seems that the fix does not immediately solve the problem of browser, but there later - maybe after a second reboot or something... very strange!

  In all case, this matter can now be considered closed, so all that remains for me to say thank you very much for your help, you are amazing :)

  All the best, very, very,.

  David.

• 42 error code when you try to delete the file

  PDF file which can be opened and read.  However, when you try to delete the file, error file not found 42 made its appearance.  MacBook Pro computer

  Please relaunch the Finder , and then try again. If there is no change, restart the computer.

• Error ESSLANG when you try to run ESSCMD after migration

  Hello
  
  Migration from 7.x to 11.1.3 and when I try and run ESSCMD I get the below error. It's been a while since I did this so don't know what to do.
  
  Thank you...
  
  Essbase command Interface in 64-bit Mode - version 11.1.1 (ESB11.1.1.3.0B126)
  Copyright (c) 1991, 2009, Oracle and/or its affiliates. All rights reserved.
  
  US 5 359 724 patent number
  Number 6 317 750 US patent
  
  
  
  ESSLANG environment variable not defined
  
  Could not get locale. Please define good environment ESSLANG.

  Installs the version 11 do not make path and environmental settings of variables available to all user IDs. I think 9 system and has done before.

  I think that the id that installs Essbase becomes the path, arborpath, essbasepath, eas_path, etc environment variables. Has no proof of identity. (The people who actually have a clue regarding the facilities will correct me if I have this wrong.) It's a pain.

  I had to put these values manually so that all ID on the server get variables.

  Navigate to the startmaxl, the startesscmd, the .cmd files was icing my cookies.

  Kind regards

  Cameron Lackpour

• 0xc015004 error code when you try to run ACDSee

  Whenever I try to install ACDSee application it installs apparently successfully, but when I try to open it I get the Message error "the application could not initialize properly (0xc015004)...". "and it closes its doors. I contacted the technical support of ACDSee and they tell me it's an operating system error code.  I tried to uninstall ACDSee, including to remove and reinstall, registry keys, but the same error code is displayed.
  Anyone have an idea what is wrong?
  Jack

  Ken

  I abandoned the Inplace upgrade and tried once more with the same result.  He "stuck" in the same place I did a complete reinstallation of the operating system.  Everything works fine now, and I was able to install ACDSee without any problem.

  Thanks to everyone who tried to help me.  In the end, you me headed in the right direction.

  Concerning

  Dealbarta

• How to stop the computer to ask what program to use when you try to run a file ".exe"?

  Whenever I select a program runs it prompts me to choose what program should I use to run the program.  He acts like he can not find the "ini" file which allows to go along with the program.  The "ini" file usually defines the settings for the program works.  It sets up the lanes for the necessary files can be found.  How my computer is, he cannot understand the program that wants to be run because the definitions are not defined.  What can I do to fix this broken configuration? All this began after I got rid of a bunch of malicious programs.

  It seems that your .exe file associations have been lost.  To restore file associations, perform the procedure in the following site specific associations to exe.  Make sure to read the Special Summit as note specifically relates to lost .exe associations:

  'Windows XP file Association problems'
    <>http://www.dougknox.com/XP/file_assoc.htm >

  HTH,
  JW

• "Impossible to copy the requested resource is already in use" error message when you try to move the file to the thumb drive.

  I'm going to try really hard to do this makes sense, but I don't know much about computers.  Bear with me.

  Brother gave me a computer.  A graphics Nvidia GeForce 9800 inside.  Because it restored the system settings, the drivers are missing.  Can not connect this computer to the internet.

  So, I went to the nvidia site and downloaded the necessary drivers on my OTHER computer, which is what I'm now on the right.  The download ends, and when I try to move the (drivers) file in the USB, I get this delicious "cannot copy xxxx that the requested resource is already in use".  It is not in use.  I can't even use it on this computer as its pilots for a graphics card that is not yet part of this computer.

  What should I do to make sure I put the file with the drivers on a USB key, on the port to the other computer.

  (by the way, this also occurs with a few random mp3s of the mine.  10 of the 12 tracks on a CD, for example, does copy on the USB no problem, but then two of them to come up with the error message, for no apparent reason.  Don't know if it's relevant)

  Try another USB key. That one is may be damaged or failing. In the meantime, to burn the drivers on a CD - R disc (not CD - RW) to take the target machine. MS - MVP - Elephant Boy computers - don't panic!

• Received the 0xC00D0FEA error code when you try to play mp3 file of hotmail message.

  I received a 5.6 mb audio recording of my brother's gmail account, and I got the 0xC00D0FEA error code when I tried to play in WMP12.

  My OS is Windows 7 Professional.

  I also tried to download the file, but do not have the option to save it in a media file. Help, please.

  Thank you

  Hello

  1. are you able to play other files on the computer using Windows Media Player?

  2. are you using Internet Explorer? If Yes, what version of IE are you using? Find out what version of Internet Explorer you are using

  http://Windows.Microsoft.com/en-us/Windows7/find-out-which-version-of-Internet-Explorer-youre-using

  You can save the file to the desktop and then right click and select play with Windows Media Player a check if it works.

  Check this C00D0FEA

  Answer with the information required for you help in this matter.

• I keep getting error messages when you try to synchronize the files from the pc to a device

  He starts the synchronization process and finished very quickly not to synchronize files and said 'error' next to each file in the synchronization status, but no other explanation

  Hello

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1 are. what device you referring?

  2. What is the brand and model of the unit?

  3. What is the exact error message do you get?

  4. have there been recent changes to the computer before the show?

  5. do the issue confined to a particular file?

  6. what application you use to synchronize the device?

  Please go ahead and consult the methods mentioned below and later a update on the State of the question.

  Set up a device to sync in Windows Media Player: http://windows.microsoft.com/en-US/windows7/Set-up-a-device-to-sync-in-Windows-Media-Player

  Synchronize music, photos, contacts, and calendars with a mobile device: http://windows.microsoft.com/en-US/windows7/Sync-music-pictures-contacts-and-calendars-with-a-mobile-device

  Windows Media Player sync: Frequently asked questions: http://windows.microsoft.com/en-US/windows7/Windows-Media-Player-sync-frequently-asked-questions

  Please follow these recommended steps and post if you still experience the problem.

• Error 80072efe when you try to run Windows Update (computers)

  In the last week or so, Windows updates have begun failing on our computers to Vista. Sometimes it will work. If there are no updates, there is no difficulty to install. Error # is always the same. Here is a text of the passage of a WindowsUpdate.log:

  + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, URL of the server = https://update.microsoft.com/v6/ClientWebService/client.asmx
  WARNING: Send failed with hr = 80072efe.
  WARNING: SendRequest impossible with hr is 80072efe. Used proxy list: <(null)>list workaround used: <(null)>Auth schemes used:<>
  + Proxy last send request failed with hr = 0x80072EFE, = 0 HTTP status code
  + Appellant provided credentials = No
  + Indicators impersonate = 0
  + The possible authorisation schemes used =
  WARNING: SyncUpdates failure, error = 0x80072EFE, the soap client error = 5, error = 0, status = 200 HTTP code soap code
  WARNING: PTError: 0x80072efe
  WARNING: Failed to SyncUpdates_WithRecovery. : 0x80072efe
  WARNING: Synchronization of updates: 0x80072efe
  WARNING: Failed to SyncServerUpdatesInternal: 0x80072efe
  * WARNING: Could not synchronize, error 0x80072EFE is
  * WARNING: Exit Code = 0x80072EFE

  An interesting sidenote, if we try to navigate to update.microsoft.com in a browser, after a long break, we get a banner at the top of Microsoft, and three empty frames all display connection errors.

  We tried different DNS servers, we bypassed the firewall, we tried all possible parameters in the network configuration of PCs, we tried to define the parameters of Internet security at the lowest level possible.
  At this point, I'm fresh out of ideas.

  Any suggestions? Does anyone else have this problem?

  Hi branchranch!
  Step 1: http://support.microsoft.com/kb/971058
  Reset the Windows updates!

  > Step 2: reinstall Windows Update Agent 3.0
  > ===========================
  > 1. Please download the file from the following link:
  > Windows Vista (32-bit)
  > http://download.windowsupdate.com/v7/windowsupdate/redist/standalone/WindowsUpdateAgent30-x86.exe 
  > Windows Vista (64-bit)
  > http://download.windowsupdate.com/v7/windowsupdate/redist/standalone/WindowsUpdateAgent30-x64.exe 
  > 2. Save the file on the D: drive.
  > Note: Please select a drive where Windows Vista was not responsible because the
  > file cannot be launched directly from the root directory of the system.
  > 3. Click Start-> Run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce.
  > (without the quotes) and then press ENTER to install Windows Update
  > engine.
  > Note: there is a space between "D:\WindowsUpdateAgent30-x86.exe" and
  > "/ wuforce.
  > Now, let's run Windows Update again.

  Hope it would work.
  Bravo!

  Anurag Shukla
  Microsoft Certified Professional

• Error 0x8004231F when you try to run back to the top

  I tried some things proposed for this error msg, but my HP Recovery is still red - only 8,01 MB of 5.09 GB free space.  The msg comes not long after the backup starts.  There is nothing in the trash and I uninstalled nearly all unused files.

  Hi Diana,

  There are two connected problems here and I tried to solve the easier one first.  My first problem is your point No. 1 - not enough space on the backup location (HP recovery).  I get a popup telling me that I have a disk on HP-recovery space, even if I deleted all external files.  For this reason, I tried to make a backup on DVD, which is when my second problem - the error msg on there is not enough storage space shadow.
  I had checked the wires for the solutions to the problem of the second and did something else at the cmd prompt, which checked for problems.

  If I do as you suggest won't that make my too big storage?

  I'm not good at this computer stuff.  Why can't I just remove everything that is in the recovery of HP?  I don't know what happened to suddenly move the red bar.  HP-recovery is an automatic backup there are too many things I don't understand.

  For the moment, I can't afford to pay to get Microsoft to fix the problem.  It will go well if I wait and do nothing, for a month?  Or should I try what you suggested?
  What

• How can I fix error 1083 when you try to run BITS?

  I recently had to reinstall Windows XP on my system due to a virus or corruption of some sort to delete my file NTLDR.  Of course, this came back my system Windows XP SP 3 to SP 1a.  For SP aa to date back to SP 3, automatic updates should work.  Automatic Updates does not work well, because the Background Intelligent Transfer Service does not start.  He throws back Error 1083: the executable program that this service is configured to run in does not implement the service.

  This is the path to the executable, it tries to run C:\WINDOWS\System32\svchost.exe-k - netsvcs

  I have no idea how to fix this, I tried everything I could find on the Support web site.

  BoyCBronco,

  http://support.Microsoft.com/kb/910337>

  06/11 / 1105:05: 14 pm