Error in installing ESXi 5 on PC

Similar Questions

• Error while installing ESXI

  Hi all

  while I'm installing ESXI on my BladeCenter (FlexSystem) on the node

  I get this error message

  What can I do?

  THX

  THX, anything that's help me

  Problem in costumization ESXI from FlexSystem (cannot be installed on the usb - hdd need only port)

• Failed to load lvmdriver error on install ESXi 4 on a XP pro 64 - bit SP2

  I get the following error on the ESXi installation on the boot cd: "failed to load lvmdriver" (after he went through the installation process of the workload does ' t program).

  ESXi cannot be installed on a machine pro 64 - bit SP2 XP (wih virtualization enabled in BIOS)? What are the requirements for hostsystem material and BONES?

  I want to use it for a productionenvironent,

  In this case, you need to install ESXi on a bare metal system.

  And the system must be in HCL if you want to use for production (just to be sure that all can work):

  http://www.VMware.com/resources/compatibility

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• Error when installing ESXi 5 on 8 workstation

  Hello team,

  I'm dounia. Recently, I completed my training as a VCP on vSphere 5. But when I try to set up a lab in my personal pc using workstation 8, it gives the VT is not enabled on your processor error. I even checked in my physical syustem BIOS and it has been activated. I disabled it and re-enabled again. Then, turn power off and power on the same. But still the same error. I checked the BIOS settings on the operating system prompted but unable to find VT settings on it.

  I am using Windows 7 32-bit operating system

  Intel i3 processor

  I allocated CPU 2 and Core 2, GBB 50 HDD, 2 GB of RAM to the ESXi.

  Please help me!

  Thank you

  Dounia

  Welcome to the VMware communities forum.

  You will need to tweak the virtual machine a little to get VT crossed at the prompt.

  Workstation 8 / Player 4

  Virtualized HV is available for the hardware virtual version 8 virtual machines on the hosts that support Intel VT - x or AMD - V and EPT of IVR. To activate the HV virtualized, select VM-> settings and access the processor settings screen. Check the box 'Virtualiser Intel VT-x/EPT or AMD-V/IVR.' You will see a warning that virtualized HV will make this inconsistent VM with other VMware products. In particular, if this virtual computer is moved to a 5.0 ESXi host, virtualized HV is available without twist additional.

  For more information, please see this document - http://communities.vmware.com/docs/DOC-8970.

• Installing ESXi 5.5, the following error message is reported:

  Installing ESXi 5.5, the following error message is reported:

  Hardware virtualization is not a characteristic of the CPU, or is not enabled in the BIOS

  LAHF/SAHF is not enabled in the BIOS. -It would help you.

• Cannot install ESXi 5.1 U1 or U2, error CPU_CORES

  
  Hello!

  I can't install ESXi 5.1 U1 or U2 on a Supermicro X10SLM + f motherboard with a quad-core Xeon-E3-1220 v3 CPU. It displays "ERROR CPU_CORES" claiming that I have only a single core and stops the installation. I was able to inject the drivers NIC to go beyond the failure of the 'no network adapter', but now I get this error of CPU.

  Someone at - it tried with this combination and has managed to install ESXi?

  Thank you for your time!

  Gregg

  Root cause found by Milton Cai to Supermicro tech support.

  Flash the BIOS to v2.0 was not completed correctly. Move the jumper to pins 2 and 3 JPME2 and re-flashing, then back to pins 1-2, fixed it.

  See these FAQS:

  http://www.Supermicro.com/support/FAQs/FAQ.cfm?FAQ=18279

  http://www.Supermicro.com/support/FAQs/FAQ.cfm?FAQ=17137

  Gregg Hill

• Install ESXi 4 PE Dell 310 if an error occurs

  Hi gentlemen

  Try to install the last install ESXi on a Dell PE T310.

  I heard that he dislikes the H200 raid controller, so for now I'm just installing on a single drive running off the SATA controller.

  Get to select the drive to install to, and then receives the error displayed in the image as an attachment.

  Can anyone shed light on this point, as I google for hours without result!

  Thanks in advance

  Josh

  Did you do a checksum? It is important to do? Also do the checksum against the CD. Make sure they match. There is nothing to gain by saying that it should be OK. Test to make sure. You can also try to write the image CD and not DVD. Try to write it using another drive.

• Error installing ESXi 4

  Hello world

  I am trying to install ESXi 4 but I get this error: "could not load the module/usr/lib/vmware/vmkmod/vmfs3

  It's off my hardware specifications:

  • CPU Intel 1366 i7 930 box (2, 80GHz)

  • ASRock X 58 Extreme

  • OCZ Memoria PC Platinum Low Voltage Triple Channel 3 x 2 GB DDR3 - 1600 PC3 - 12800 CL7

  • SAPPHIRE TECHNOLOGY Radeon HD 4550-512 MB GDDR3 - PCI-Express 2.0

  I leaned on the vmware hardware compatibility list and I find not all components of this exactly, but some of the research I did, I noticed that there are people who has successfully installed this platform in someless material.

  Do you have any idea what might cause these problems?

  Thank you.

  JN

  Thank you very much.  That was exactly the problem.

  Board: Gigabyte GA-G31M-ES2L v2, processor E6500

  Integrated NETWORK interface is undesirable Atheros.

  Replaced by the current Intel PCI NIC, disabled onboard, ESXi 4.1 installs fine.

  Thanks again.

• Initialization failed: press a button to try again... when installing ESXi ISO

  After a repair of an already open a question problem, a new question was raised.  I open another question because this problem is new, and I thought that a new question must be requested in this regard.

  Following the instructions of this question, I have re-recognized my blade twice.  Looking at the KVM, I have not seen a no boot device message, which was to be expected.  I went to re - install ESXi 5.5 (which was already installed on the SD card before the open-ended question) and I am now met with the following message is displayed:

  isolinux: disk error 20, AX = 422D, reader EF

  I rebooted several times the blade to re - try unsuccessfully to installation.  I even went back to an ISO of 5.1 ESXi, who gave the best results.

  The ISOs I use are UCS VMware ISOs downloaded directly from VMware.

  Please check the question as answered future users faced with the same question

  -Kenny

• How to install Esxi 5.5 on a card mother-GA-H97N-WIFI

  Hello

  I have some problems to install Esx on my new configuration.

  My configuration is:

  -Processor I5 4590S

  -GA-H97N-WIFI Motherboard

  -Crusial Ballistix Sport - DDR3 - 16 GB

  -GeForce Quadro 600

  -1 drive sata hard

  Whenever I tried to install esxi 5.1, 5.5 or 6.0, I have a black or pink screen with the fatal error.

  Has anyone an idea?

  Thank you

  Hello

  I finally found the solution, my RAM memory are defective.

  When I turned it off, I can install Esxi wells.

  Thanks for your help.

  Concerning

• Install ESXi 5.5 restarts the Adaptec RAiD card

  Hello

  I have a job im trying to install ESXi 5.5 on. I got it running on the machine perfectly well until I added a map of Adaptec Raid 3805. Now when I try to install ESXi it restarts everything when trying to load the AACRAID driver. It isn't hanging or show all errors. It just restarts immediately.

  VMware claim the Adaptec 3805 is compatible with ESXi 5.5

  Anyone got any ideas on why this is happening?

  Managed to solve this problem.

  I had to disable virtualization technology Intel® for Directed i/o in bios and now the installation program works perfectly

• Cannot install ESXI 5.5 HP 3500 PRO series

  Dear all,

  Try to install ESXI on HP PRO 3500 MT series 5.5. Its gives me the following error.

  "NO network adapters have been detected.

  Can someone please help?

  Thank you
  Sriram Das A

  Im not saying there is a problem with your network adapter, its just ESXi does not have a suitable driver for it. IM assuming that you use Realtek RTL8171E gigabit ethernet (received this HP site). There was a blog post from Vladan Seget on how install driver 8169 vib. http://www.Vladan.fr/Realtek-8169-NICs-not-detected-under-ESXi-5-5/

  But once it comes to 8169. I'm not sure if there is a driver available for 8171 (8171and same 8169 is not in the list of VMware support)

• After installing ESXi 5.1 computer does not boot any device

  Hello VMware Experts,

  This certainly isn't my are of expertise as I work most of the time on the bet network but in any case here is my problem area, and I hope that some of you can help me with this.

  So I bought a PC on Ebay hoping that I could define as an ESXi Server (here's the link:http://www.ebay.com/itm/Gateway-Intel-i5-3330-3GHz-8GB-1TB-Windows-8-Desktop-PC-DX4870-UB318-/321165075173?pt=Desktop_PCs & hash = item4ac6ee22e5 )

  )

  So I downloaded ESXi 5.1 and begun to installed

  First surprise, I had (it did not recognize my network card, I went to amazon and bought an Intel PCI Express NIC to get there)

  After 2 weeks, I received it today.

  Finally, I put the PCI network card in the motherboard and begin the installation.

  Everything seems to be perfect, great when I had until I completed the installation... I smile and then saw the message Installation successful, remove the CD from the CD room and restart the server.

  Right Awesooome! But then the problem occurred.

  After that the unit is back from the restart process he did not recognize any boot image installed on the drive hard (hard disk already set from the BIOS as a startup option)

  An error message like:

  does not recognize the bootable media

  I tried re installation, overwriting without success. (Same behavior)

  I know it's a very simple process, but what might happen here,

  Any ideas?

  Kind regards

  Jcarvaja

  I have no idea why you install esxi on a metal bere machine but I assume you want for a lab at home.

  Well from my experience, when I started to learn Vsphere 5.1 - I was installing windows 7 on a desktop computer - then bought Vmware Workstation - I installed 5 ESXI host on it and tested all the features (HA, DRS, FT, VMotion etc.).

  I have a HDD i5 Desktop 2 t and 32 GB of Ram - but you could look for at least 8 GB of Ram it works perfectly.

  Let me know if you need help setting up Esxi in workstation...

  Concerning

• Help with installing ESXi 5.1 with SSO

  So I'm setting up a testlab and used a combination of guides in the links below.  Install ESXi seems very simple and it passes through unhindered.  I managed to log in via the Client VSphere Vcenter, but when I try to open the Web Client I get a "Page not found" error  I ran across two times and I'm stumped.  The local client works so I do not know why the Web Client is not.  I tried Https://10.0.0.100:9443 / vsphere client and https://vcadmin.testlab.local:9443 / vsphere client and no luck.  If you need more information please let me know.  Thanks for your suggestions, you can offer as I'm just learning.

  vCenter 5.1 Installation (Part 1) & amp; #8211; Prepare data bases

  I did all the pieces of 1-5 with this guide.  Once I got the error in the screenshot below I created new machines, started from scratch and used this second guide below (all parts), but always the same mistakes with the web client.

  http://www.derekseaman.com/2012/09/VMware-vCenter-51-installation-part-1.html

  

  I agree that the Web Client did not work because the SSO and Vcenter services were not started.  So after a few tests, I determined that the reason why these services wouldn't start and gave me errors I have screenshot in my second post here is because I only had 1 GB of RAM dedicated to the virtual machine.

  1st test - VM with 1 GB of ram.  Local customer opens well but the Web customer service does not even start.

  2nd test - VM with 2 GB of ram.  Local client continues to work and now the Web Client services start automatically as it should, but Web Client is terribly slow.

  3rd test - VM with 4 GB of ram.  Customer Web works without in any way slow down large

  4th test - VM back up to 1 GB of ram to double check.  Web customer service do not start.

  After these tests, so you need 2 GB or MORE ram dedicated to your VM/lab server to ensure the work of WebClient.  It's something good to know.  Thanks for your help, I appreciate it.

• Newly installed ESXi 5.1 on HP DL360p gen 8 Gets a yellow light

  We recently bought a pair of DL360p gen 8 and install ESXi 5.1 using image provided by HP and everything is fine. But after cutting using vSphere client, there is a yellow light says "Host Baseband controller status", indicating that the ILO has warnings.

  We have no bits set and plan of not is there. Is it normal to yellow light? Two hosts has the same problem, so I don't think that the ILO has really the problem...

  Hello..

  If your interface of the ILO is not connected at all vcenter throws this error... If you plan not to do heavy duty at all, you can turn off this alarm in vCenter (name of the alarm is 'Host Baseboard Management Controller status')

  / Rubeck