Error in saving hard

Similar Questions

• HP Photosmart Premium C410A: error: an error occurred saving the file because it could not be written to. Check the properti

  I just upgraded to Mac OS 10.12 Sierra. Now my HP Photosmart Premium C410A apparently scans the document perfectly (I can see it on the screen of the computer when the scan is complete). However, he craps out when I try to save the document. Enforcement either abnormally is abandoned and firm, giving me this error pop up with ad nauseam screen computer jibberish, or I get the following error message: "error: an error occurred saving the file because it could not be written to." Check the properties of the file to ensure that it is not dead. »

  Scanning and saving documents are critical to my business. I just have to solve this ASAP. Looking for solutions. Any ideas?

  Hello

  It is incompatible with the Sierra of HP scanning.

  Applications > file HP travel HP Scan to the trash, then empty the trash.

  Download and install HP Easy Scan instead, it will be installed in the Applications folder:

  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg

  Kind regards

  Shlomi

• Error: "an error occurred saving the file because it could not be created" during the recording of digitized file

  Original title: I'm not able to save the scan through my HP Officejet 6210 all-in-one.

  I get this error message: an error occurred saving the file because it could not be created. What should I do? I used to be able to save documents in the form of files .pdf until recently when my computer has been infected by a virus, and someone helped clean up remotely.

  Hi ameerlakhani,
   
  Try to save the scanned in a different file format and check if it helps fix the problem.
  Follow the steps in this article and check if it helps.
  Using the HP scan Diagnostic Utility
   
  If this is not enough, post your request in the support forum HP for assistance.
  Visit the following link to do the same thing:
  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/BD-p/scan

• Get several errors in the hard drive and the slowness of the system XP

  COMPAQ Evo N600c, has a lot to a lot of errors on the hard drive. Slow to load, slow to respond to commands, sites will freeze in the middle of the operation. A way to clean the system of mistakes without having to spend money (amount X). ?  Ran, Anti - Virus, also hard drive cleaner and have Windows SP3 update. Thank you, Thomas,.

  * original title - mistakes, mistakes, mistakes and Everwear *.

  COMPAQ Evo N600c, has a lot to a lot of errors on the hard drive. Slow to load, slow to respond to commands, sites will freeze in the middle of the operation. A way to clean the system of mistakes without having to spend money (amount X). ?  Ran, Anti - Virus, also hard drive cleaner and have Windows SP3 update. Thank you, Thomas,.

  Please be specific on what you mean by "far from many errors on the hard drive."  What kind of mistakes? Do you mean the drive read errors? Please quote the error message you get exact, verbatim.

  How many mistakes is "too much"? How many times they do they happen? They occur only when doing certain things or anything?

  If you really get a lot of the drive read errors, the drive is defective and must be replaced.

  But if you're talking about freezing, slow, etc. This is another question entirely, and I wouldn't call it 'errors on the hard drive. The little info you provided the mind, it is difficult to know what this problem is, but one of the things these days plussusceptibles is malware infection. What antivirus do you run (they are far from being just as good, and some of the most popular are among the worst). Do you also run an anti-spyware program? If not, it's * very * likelythat you are infected. I recommend that you download and run the free MalwareBytes AntiMalware to http://www. Malwarebytes.org/products/malwarebytes_free

• PSC 2510 - wireless configuration - "error while saving the settings of the device.

  While trying to configure my PSC 2510 to be wireless I get an "Error." error while saving the settings of the device. This comes after selecting the network connection, select printer device, choose WEP, enter key and clicking next.

  PSC 2510

  Windows Vista

  Using the latest HP sfotware to install

  Thank you

  Dennis

  PROBLEM SOLVED... based on PrintDoc response to penn (refrence section "C4385 printer - Netgear DGN2000 Wireless Setup".-

  PrintDoc response has helped me find my problem (to reset the network settings on the printer to the factory) if different same printer.

  Thank you

• How can I check all the errors on my hard drive?

  I was awarded errors on my laptop which is running windows 7 that I might have an idea how to do to check and correct these errors. Thank you

  Hi Grandpa

  Thanks for your posting in Microsoft Community

  You can help solve some computer problems and improve the performance of your computer by making sure that your hard disk has no errors.

  1. Open the computer by clicking on the button start , and then clicking computer.

  2. Right click on the hard drive you want to check, and then click Properties.

  3. Click on the Tools tab and then, under error-checking, click check now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

     To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.

     To perform a full disk check, select search and attempt to recover bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.

     To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.

  4. Click Start.

  Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

• CS6: could not complete your request because of a program error when saving a PSD file.

  Hello

  Currently an error when saving a PSD file.

  Any help to solve this problem?

  Thank you so much ~

  Hi KOGHelpdesk,

  Try to restore Photoshop preferences to default.

  Steps to follow:

  To re-create the Photoshop preferences files, start the application while pressing Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop settings file?"

  Let us know if that helps.

  Kind regards

  ~ Mohit

• Error in saving as PDF

  Hello
  
  We are on HFM financial reports 11.1.2.1.00 and 11.1.2.1.103 and I'm having a problem when running a lot of report. I have a lot that I run every month that contains some reports that are emailed to users. For some reason, the second time the batch runs on one of the reports to another entity (using snap on the entity), I get the error message below.
  
  Error in saving as PDF
  Index: 3, size: 3
  
  Any thoughts? Email is fine and the other reports are very good.
  
  Thank you
  Jason

  Check the article KM 1504257.1 id.

  It is said as a result of solution:

  1. on the EN server, go to Oracle-Middleware------EPMSystem11R1------products------borrowing-bin.
  2. double-click on FRConfig.cmd.
  3. when the Java window (Java monitoring & Management Console) opens, click on the MBeans tab.
  4. develop com.hyperion > Financial Reporting > attributes.
  5. search for the entry of PrintServers.  Remove all invalid server in the value field names.
  6. stop and start the Application Web Hyperion Financial Reporting.

• I get an error "the disk hard virtual parent is in a saved state. Discard the saved state or stop the virtual machine and try again. "during the installation of XP mode.

  I have Win7 Pro SP1 x 64.  I downloaded WindowsXPMode_en - us.exe (from Microsoft downloads) and run it.  The installation seems to work OK (I've specified a different location for the parent virtual hard disk file).  Then, installation happening and I provide the information requested (name of user and password for the XP Mode), updates Windows and OK to the issue of sharing.  The installation program then reports the following error:

  The disk hard virtual parent is in a saved state.  Discard the saved state or stop the virtual machine and try again.

  I get the error even if I try manually configure XP Mode (use the Setup Wizard).  I downloaded the installer XPMode (3 times) and reinstalled several times, always with the same result.  If it helps, I can't locate anywhere .vsv file.

  Any idea what's going on?

  Original title: XP Mode Setup error

  Hi smithnr10,

   

   

  You must post your question in the TechNet forums because it caters to an audience of it professionals.

  To do this, you must consult the link-

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

   

  Hope this helps!

• "Access denied" error on all hard drives external and MagicDisc

  I just purchased a Lenovo B575 running Win7 Home Premium and I'm very frustrated that I can't access my external hard drives, which are essential to my work. I get the error "Access denied" the normal start, but I'm able to use disks normally in safe mode. Here are some of the things I've tried:

  -Change the permissions/ownership after normal startup: does not work. Windows doesn't let me change the permissions or ownership, even if my single user account is set to administrator.

  -Change the permissions and ownership in safe mode: I found a solution online saying "Everyone" to add to the list of users in the Security tab. It works * temporary *, until I unplug my hard drives. When I plug back them, it's back to square one.

  -Install MagicDisc to access some files I saved in the form of ISO images: MagicDisc seems to work very well and load images normally... but also, I get the error "Access denied" when you try to open the drive in Explorer.

  -USB flash drives: same problem.

  -Other erratic behavior: one of my USB drives will not stop read/write as soon as I plug. I don't know if it's the McAfee antivirus analysis each of millions of files that I have on this subject, or if something else is happening.

  I had NONE of these issues on my old Acer and HP to my friend has no problem loading my readers. If I can't find a solution soon, I'll be forced to return this laptop that I need to access my work files.

  I lost my patience all yesterday and not the OneKey Rescue, restore my system to nine. Then, I named my new laptop of the same name that my old (relevant at all?). He immediately provoked a hard drive to work. The 750 GB it does not work yet, but I changed the permissions AND ownership to "Everyone" in SafeMode... now it seems to work correctly. No problem with other removable disks.

  That they are related or not, I have not initialized or changed some settings on the programs supplied with the laptop. My guess is that port Locker has something to do with the question I had - even if it has been disabled before. I'm uninstalling as I did not need. BioExcess, face recognition... everything goes down the drain. These should be optional, not enabled by default. Too many background services! I'm disabling a bunch of unnecessary stuff.

  Detective Conan?

• Disk error backup external hard Time machine

  Hello
  While that hurry to catch a flight, I accidentally disconnected my external hard drive (which I use for time machine backups) before ejecting.  Now the House, the time machine backup does not recognize my external hard drive.  I went into disk utility to try to repair the disk.  Here's what he said:

  
  

  Verification and repair card partition for "Time Machine external HDD ' Verification of prerequisitesChecking map of partition partition listAdjusting to adapt to any disk as a requiredChecking for a partitionChecking of the system EFI sizeChecking of the system partition EFI systemChecking of file system EFI the EFI folder of the system partition contentChecking partition data HFS charger spacesChecking boot partitionsReviewing support loadersChecking Core Volume physical storage partitionsUpdating Windows boot.ini boot files of score as card requiredThe partition seems to be OK

  Verify and repair volume 'Time Machine' Repair file system. File system check exit code is updated 8. support partition for the volume as requires it. Error: disk utility can't repair the disk. Back to the top as many files as possible, reformat the drive and restore your backed up files.

  
  

  I could really use some help as to how I should proceed.  Any advice?
  

  I think you need to clear this backup disk, and while you are this and do a full backup (which takes all afternoon to all night) you will be working without a net. If you do in idle time, and after checking your boot disk, the risk of catastrophic failure while the backup is low. Start now and in the future, you will have a backup.

  If you have a different backup disk, add it and Time Machine will create a new independent backup on it, and then Time Machine alternate disks automatically.

• Satellite M70-173 - fatal error - new drive HARD and recovery.

  Excuse my lack of knowledge.

  I received a Satellite M70-173.

  to turn on before charging readings - fatal error; I have to save all my data and replace the hard drive.

  I don't know if it's fixable and that's what I have to do. I also said that when you replace a HARD disk I need a recovery disk.

  I reside in Cyprus and don't have is not easy access to the shops of style PC big supermarket.

  I was wondering if I could use a generic HDD and if so is there a particular one that I need to acquire?

  Also

  where would I go to get a recovery disk?

  I got the laptop I can't afford to buy a new one at the moment and it is still in very good condition apart from the above-mentioned problems!

  I wish that all the advice on what type of HARD drive, I would need or is available - rough cost so I don't get ripped off and if we change the disk HARD is as easy as I read. Also where I should go to get a recovery disc and if that's all I need to fix the laptop.

  Thank you very much in advance for any help I can get.

  Peter

  > The laptop does turn on - is it possible to make a recovery of a damaged laptop disk

  How do you do if you can't turn on the laptop?

  What you could do is to remove the HARD drive, then place it into the drive enclosure HARD 2.5 external, then connect the HARD drive to another computer, to save the data.

  In my opinion this is what you could do

• T1200XE error fall on hard disk 0 initialization

  Hello!

  I just bought an older T1200XE. When I start the laptop, it prints the message "error initializing hard disk 0" after the memory test, (a few seconds). I have to start with a floppy disk BACK.

  If I run FDISK, after awhile, it says 'Disc read error fixed', but if I run FDISK/status it shows me the disk of 20 MB. I downloaded FreeDOS and the FDISK, including in this OS says "controller error".

  I have an another T1200XE and this is exactly the same!
  I can't believe that two controllers or hd is dead!

  It may be possible that the free battery CMOS have erased the BIOS, but, how can I access the BIOS and configure the 20 MB HD? any idea? The setup1.exe program do not have a HD section...

  Help please!

  Thank you to.

  Hello

  Press F1 at startup to enter the Bios.

  http://FTP.Toshiba.ca/support/TechSupport/TSBs/all/-TSB000733.htm

• The journ.e Touch software error - how do hard reset?

  Hello

  My Journ.e Touch crashed software...

  A lot of Windows CE error in the application .exe file and an error 'unaspacted' so that it is turn on.

  If it is possible, how can I do a hard reset or restore default?

  Thank you to
  Luca

  > Then I did a hard reset (bottom) but no chance of passing on the tablet. Only a screen Toshiba invitation
  Have you done this correctly?
  To reset the trip you must move the left then right reset button again. Press the power button on the right side at least 3 seconds.

• HP 250 Portable G2: 0xc0000225 error code. Hard drive is not accessible, computer laptop HP 250 G2

  I'm doing a clean Windows 8.1 64-bit as a result of a fall, but I'm getting 0xc0000225 error code, using built-in HP recovery utility. Installing Windows also says: Windows could not retrieve information about the disks on this computer. Kindly help. Thank you

  If your computer is originally shipped with Windows preinstalled by HP (as it should) - it would be better to use the HP recovery media that will repair Windows, applications, and all the default partition to factory. It will use the license of your machine for Windows and should automatically active Windows after installation.

  If you are using the 8.1 Windows installation media, you may need a facility to post license Win (depending on the type of used windows).

  -If you want to use the original that are preinstalled windows, you can get a HP recovery media as described above

  -If you are using the 8.1 Windows installation disc and install Windows from using your driver's license, follow these steps:

  1 boot from the Windows DVD
  2. click on install now
  3. in the configuration screen, click Custom (Advanced)
  4. click on Drive Options
  5. Select the partitions to format
  6. click on Format - this will delete EVERYTHING on this partition - format and delete all partitions
  7. create a new partition, and then select a partition to install Windows on.
  8. continue the installation.

  If the Windows installation disc does not work for the above you can do the following to reformat your hard drive:
  1. download a Gparted ISO from here:
  http://gparted.org/LiveCD.php

  2 burn the ISO to a CD or DVD
  2. start from the CD/DVD of Gparted disk.
  3. use Gparted to delete all partitions on the hard disk.
  4. under 'Device' choose Create Partition Table to a new table partition.
  5. create a NTFS partition (or you can wait and create a partition during the installation of Windows).

  Finally, boot from the Windows installation disc and install Windows.

  Let me know if it works for you