error in the schema import

Similar Questions

• How to work directly with the schemas imported or included xml db?

  Hello Forum,
  
  + [my system: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0, windows 7, 8 GB of RAM, Enterprise edition of altova xmlspy 2007] +.
  
  Help, please? I browsed this forum. I googled like crazy. I have read and reread the db xml docs. for 16 hours straight, I tried everything I can think of to fix this. but I can not yet understand what goes wrong.
  
  After you have added annotations that are appropriate to the hierarchially-dependent five (imported and/or included) third patterns, I registered successfully the schemas in the xml db repository. all patterns and their associated with successful instance documents validate in Altova XMLSpy.
  
  I was able to insert a xml instance doc successfully in an auto-generated XMLType table ("+ ct - valid.xml + ') which was based on one of the patterns (" + envelope-v2 - 0.xsd + '). However, when I tried to insert in its corresponding XMLType table, one other instance doc ("+ cis - valid_irenvelope_request_0.xml + '), based on another of patterns (' + AgentAuthRequest-v1 - 2.xsd + '), I got:
  
  

  ERROR at line 1:
  ORA-30937: No schema definition for 'PeriodEnd' (namespace
  'http://www.govtalk.gov.uk/taxation/AgentAuthRequest/1') in parent
  '/IRenvelope/IRheader'
  ORA-06512: at "SYS.XMLTYPE", line 295
  ORA-06512: at line 1

  the "+ IRenvelope +" element (defined in "+ AgentAuthRequest-v1 - 2.xsd + ') refers to her child" + IRheader + "element of a schema included (" + base-v2 - 0.xsd + "); ' + IRheader / PeriodEnd + "is set to" + base-v2 - 0.xsd + ".
  
  Please, help me understand what I need to do to make this work? the above patterns are in this zip file .
  
  
  Thanks in advance for your help.
  
  
  the following files are included in this zip file :
  
  
  AgentAuthRequest-v1 - 2.xsd
  Core-v2 - 0.xsd
  Sun - certified_registerSchema_calls_0.txt
  CIS - valid_irenvelope_request_0.xml
  CT - valid.xml
  trace udump files

  I reproduced the problem on 10.2.0.4 (the closest I can get to your version) and 11.2.0.2 too.

  I call it a bug that I may be missing something, but it seems that "Design Chameleon" is not supported.

  Most of the time, xs: include is used to include another scheme which is in the same namespace as the includer target.
  But it should also work when you include a diagram in no namespace (core-v2 - 0.xsd in this case), its definitions are then "imported" names within target.

  In this case, included base-v2-0 definitions are apparently not moved to namespace 'http://www.govtalk.gov.uk/taxation/AgentAuthRequest/1' and are in no namespace, where the error.

  For example, the way space default namespace for elements included work:

  
  
  
   
    1967-08-13
    Individual
   
   
   ...
  

  Declaring the same target namespace in core-v2-0 works as well.

• Errors in the schema SQL TestStand 4.1.1

  I am trying to create a new MSDE 2005 SQL Server database using the new schema of TestStand 4.1.1. I've used the SQL Server stored procedure to generate a .sql file, and then run this SQL file. I get several errors similar to the following:

  > CREATE TABLE STEP_RESULT (ID uniqueidentifier PRIMARY KEY, UUT_RESULT uniqueidentifier, STEP_PARENT uniqueidentifier, int ORDER_NUMBER, STEP_NAME varchar (255), STEP_TYPE varchar (255), STEP_GROUP varchar (32), STEP_INDEX int, STEP_ID varchar (32), STATUS varchar (255), REPORT_TEXT varchar (255), int, varchar ERROR_MESSAGE ERROR_CODE (255), CAUSED_SEQFAIL bit, MODULE_TIME float, float TOTAL_TIME) Int NUM_PASSED int NUM_LOOPS, int NUM_FAILED, int ENDING_LOOP_INDEX, int LOOP_INDEX, int INTERACTIVE_EXENUM, CONSTRAINT STEP_RESULT_FK FOREIGN KEY (UUT_RESULT) REFERENCES (ID))
  Command failed with the following error...:
  Line 1: Syntax incorrect close '('.) (- 2147217900)

  I tried to run this statement in both MSDE and through the viewer of TestStand database with similar results. Everyone knows this problem or have any ideas?

  Function to generate the SQL files from a schema does not always perfect SQL statements, but closer you get to where you need to be to try to create it from scratch. Have you thought to look at the default SQL files included with the product, specifically the file "SQL Server Create Stored Proc result Tables.sql" located in the directory "\Components\Models\TestStandModels\Database?" It is a file that should work out of the box for the default schemas for SQL server and MSDE. Other SQL files for other schemas by default, and there are older SQL files for previous versions in the subdirectory 'previous patterns (2.x - 4.0).

• error during the database import complete import

  Hello
  
  I get below error when importing from one server to the other server.
  
  version 10.2.0.1.0 to 10.2.0.5.0 Oracle.
  
  IMP-00015: after statement failed because the object already exists: on full import
  
  
  
  Export file created by EXPORT: V10.02.01 by conventional means
  import in US7ASCII and AL16UTF16 NCHAR character set
  import server uses WE8ISO8859P1 (possible character set conversion) character set
  . import objects of the SYSTEM to the SYSTEM
  IMP-00017: statement failed with error ORACLE 1119:
  "CREATE TABLESPACE"JISPREPCORBILLINGPRD501"BLOCKSIZE 8192 DATAFILE ' / opt / '.
  'u01/app/oracle/oradata/ora10g/jisprepcorbillingprd501.dbf "SIZE 52428800"
  "AUTOEXTEND THEN 8192 MAXSIZE 32767M MEASURE LOCAL AUTOAL MANAGEMENT"
  «LOCATION SEGMENT SPACE MANAGEMENT AUTO PERMANENT ONLINE»
  IMP-00003: ORACLE error 1119
  ORA-01119: error in creating database file ' / opt/u01/app/oracle/oradata/ora10g/jisprepcorbillingprd501.dbf'
  ORA-27040: create file error, cannot create the file
  Linux-x86_64 error: 2: no such file or directory
  IMP-00017: statement failed with error ORACLE 1119:
  "CREATE TABLESPACE"CYBEROAM"BLOCKSIZE 8192 DATAFILE ' / opt/u01/app/oracle /.
  "oradata/ora10g/cyberoam.dbf"SIZE 70057984 AUTOEXTEND ON NEXT 8192 M.
  ' AXSIZE M EXTENT MANAGEMENT LOCAL AUTOALLOCATE ONLINE 32767 PERMANENT SEGM.
  "ENT SPACE MANAGEMENT AUTO.
  IMP-00003: ORACLE error 1119
  ORA-01119: error in creating database file ' / opt/u01/app/oracle/oradata/ora10g/cyberoam.dbf'
  ORA-27040: create file error, cannot create the file
  Linux-x86_64 error: 2: no such file or directory
  IMP-00017: statement failed with error ORACLE 1119:
  ""CAPTIVEPORTAL' of CREATE TABLESPACE BLOCKSIZE 8192 DATAFILE ' / opt/u01/app/or.
  "" SIZE 52428800 AUTOEXTEND ON NE acle/oradata/ora10g/captiveportal.dbf '.
  «XT 8192 MAXSIZE 32767M EXTENT MANAGEMENT LOCAL AUTOALLOCATE PERMA ONLINE»
  "MANENT SEGMENT SPACE MANAGEMENT AUTO.
  IMP-00003: ORACLE error 1119
  
  
  How to solve it?
  
  Thanks in advance.

  This error looks like the disk is full. If the tablespace did not exist, you would have received a different error. Look at devices which tablespaces live and see if they are full.

  Dean

• Error with the data import CSV in FDMEE file

  Data entry; JOD; No details; No product; Actual spending; ERP; Sep; 2012;-40476487.79

  [WHITE] 01; 71111; 411101; 26101, entering data; JOD; No details; No product; Actual spending; ERP; Sep; 2013;-9670984.005

  [WHITE] 01; 71111; 411101; 26101, entering data; JOD; No details; No product; Actual spending; ERP; Sep; 2014;-43065295.14

  [WHITE] 01; 71111; 411101; 26101, entering data; JOD; No details; No product; Actual spending; ERP; Sep; 2015;-37741827.48

  [WHITE] 08; 71111; 411101; 26001, entering data; JOD; No details; No product; Actual spending; ERP; Feb; 2011;-2186.535

  [WHITE] 08; 71111; 411101; 26001, entering data; JOD; No details; No product; Actual spending; ERP; Jan; 2011; 2186.535

  [WHITE] 08; 71111; 411101; 26101, entering data; JOD; No details; No product; Actual spending; ERP; Apr; 2010;-1107458.244

  [WHITE] 08; 71111; 411101; 26101, entering data; JOD; No details; No product; Actual spending; ERP; Dec; 2010;-969379.839

  [WHITE] 08; 71111; 411101; 26101, entering data; JOD; No details; No product; Actual spending; ERP; Dec; 2010; 5664971.523

  [WHITE] 08; 71111; 411101; 26101, entering data; JOD; No details; No product; Actual spending; ERP; Dec; 2011; 539642.297

  [WHITE] 08; 71111; 411101; 26101, entering data; JOD; No details; No product; Actual spending; ERP; Feb; 2010;-161439.3

  [WHITE] 08; 71111; 411101; 26101, entering data; JOD; No details; No product; Actual spending; ERP; Feb 2011;-265875

  [WHITE] 08; 71111; 411101; 26101, entering data; JOD; No details; No product; Actual spending; ERP; Jan; 2011;-273767.297

  [WHITE] 08; 71111; 411101; 26101, entering data; JOD; No details; No product; Actual spending; ERP; Jul; 2010;-487855.76

  [WHITE] 08; 71111; 411101; 26101, entering data; JOD; No details; No product; Actual spending; ERP; Jun; 2010;-1322401.382

  [WHITE] 08; 71111; 411101; 26101, entering data; JOD; No details; No product; Actual spending; ERP; Mar; 2010;-1339217.998

  [WHITE] 08; 71111; 411101; 26101, entering data; JOD; No details; No product; Actual spending; ERP; May; 2010; - 277219

  Filled lines: 0

  Lines rejected: 438

  2016-01-31 07:57:46, 479 [AIF] INFO: EPMFDM - 140274:Message - MODE ARCHIVE: copy

  2016-01-31 07:57:46, 479 [AIF] INFO: EPMFDM - 140274:Message - Archive of startup files:

  2016-01-31 07:57:46, 480 [AIF] INFO: EPMFDM - 140274:Message - Archive file name: 20120140831.csv

  2016-01-31 07:57:46, 482 [AIF] INFO: EPMFDM - 140274:Message - remove the source file: load7.csv of data

  2016-01-31 07:57:46, 482 [AIF] INFO: EPMFDM - 140274:Message - no deleted files: / u03/inbox/Data load7.csv

  2016-01-31 07:57:46, 493 [AIF] INFO: EPMFDM - 140274:Message - ImportTextData - end

  2016-01-31 07:57:46, 493 [AIF] INFO: EPMFDM - 140274:Message - time taken for import in ms Total = 76

  2016-01-31 07:57:46, 597 [AIF] INFO:

  Import of Source data for the period "Aug-2014".

  2016-01-31 07:57:46, 604 INFO [AIF]: generic data lines imported from Source: 0

  2016-01-31 07:57:46, 605 [AIF] INFO: Total of lines of data from the Source: 0

  2016-01-31 07:57:47, 927 INFO [AIF]:

  Map data for period "Aug-2014".

  2016-01-31 07:57:47, 931 WARN [AIF]: warning: no record exists for period "Aug-2014".

  2016-01-31 07:57:47, 941 [AIF] INFO:

  Scene for period data "Aug-2014".

  2016-01-31 07:57:47, 942 INFO [AIF]: number of deleted lines of TDATAMAPSEG: 0

  2016-01-31 07:57:47, 944 INFO [AIF]: number of lines inserted in TDATAMAPSEG: 0

  2016-01-31 07:57:47, 945 INFO [AIF]: number of deleted lines of TDATAMAP_T: 0

  2016-01-31 07:57:47, 946 INFO [AIF]: number of deleted lines of TDATASEG: 0

  2016-01-31 07:57:47, 948 INFO [AIF]: number of rows deleted from TDATAMEMOITEMS: 0

  2016-01-31 07:57:47, 949 INFO [AIF]: number of deleted lines of TDATAARCHIVE: 0

  2016-01-31 07:57:47, 951 INFO [AIF]: number of lines inserted in TDATASEG: 0

  2016-01-31 07:57:47, 952 INFO [AIF]: number of deleted lines of TDATASEG_T: 0

  2016-01-31 07:57:47, 982 [AIF] INFO: - END IMPORT STEP -

  2016-01-31 07:57:48, INFO 007 [AIF]: - START NEXT STEP -

  2016-01-31 07:57:48, 037 [AIF] WARN: caution: the Import step is not completed for the period August-2014

  2016-01-31 07:57:48, 039 [AIF] WARN: caution: the Import step is not completed for the period August-2014

  2016-01-31 07:57:48, 064 [AIF] INFO: - END VALIDATE STEP -

  2016-01-31 07:57:48, 261 [AIF] INFO: end process FDMEE, process ID: 201

  The period mapping that I create is right

  

  2016-01-31 07:57:47, 927 INFO [AIF]:

  Map data for period "Aug-2014".

  2016-01-31 07:57:47, 931 WARN [AIF]: warning: no record exists for period "Aug-2014".

  You can check your mapping table of the period which has ' Aug-2014 "created since I can't see your attached screenshot?"  If it is already there, make sure that the period is NOT locked.

  Good luck.

  Alex Liu

  E.M.P. freelance architect

• Error in the SVG import with textPath

  I have a simple SVG that does not work: letters rotate incorrectly in import. I think it is a bug in Illustrator because other programs may see the image correctly, included browsers. Can someone help me to properly import the Illustrator?

  Thank you

  <svg width="100%" height="100%" viewBox="0 0 1000 300"
   xmlns="http://www.w3.org/2000/svg"
   xmlns:xlink="http://www.w3.org/1999/xlink">
  <defs>
   <path id="MyPath"
   d="M 100 200
  C 200 100 300 0 400 100
  C 500 200 600 300 700 200
  C 800 100 900 100 900 100" />
  </defs>

  <use xlink:href="#MyPath" fill="none" stroke="red"  />

  <text font-family="Verdana" font-size="42.5">
   <textPath xlink:href="#MyPath">
  We go up, then we go down, then up again
   </textPath>
  </text>

  <!-- Show outline of the viewport using 'rect' element -->
  <rect x="1" y="1" width="998" height="298"
   fill="none" stroke="black" stroke-width="2" />
</svg>

  Export to EPS or PDF from any application that can import correctly.

• Error in the Console of the OSB SOAP request

  Hello
  I learn just OSB, and I tried to test a web service project that I had built. I deployed the project on Weblogic, created the WSDL for the service of the company in OSB and mounted that as well, but when I try to test it, the SOAP response gives the following error: could not find the method dispatch for {http://calculatorservice} doAdd
  
  I use JDeveloper 11.1.1.4, WebLogic 10.3.4 and OSB 11 GR 1 material.
  
  The complete source code is as follows:
  
  Calculator.Java
  
  CalculatorService package;
  
  Import javax.jws.WebService;
  
  @WebService (targetNamespace = "http://calculatorservice")
  public class Calculator implements {CalculatorIF}
  
  @Override
  public int doAdd (int a, int b) {}
  return a + b;
  }
  
  @Override
  public int doSub (int a, int b) {}
  return a - b;
  }
  
  }
  
  CalculatorBusinessService.wsdl
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  < name of definitions = "CalculatorBusinessService."
  targetNamespace = "http://calculatorservice."
  xmlns = "http://schemas.xmlsoap.org/wsdl/".
  xmlns:TNS = "http://calculatorservice".
  container = "http://www.w3.org/2001/XMLSchema".
  xmlns:SOAP = "http://schemas.xmlsoap.org/wsdl/soap/".
  xmlns:MIME = "http://schemas.xmlsoap.org/wsdl/mime/"
  xmlns:SOAP12 = "http://schemas.xmlsoap.org/wsdl/soap12/".
  xmlns:types = "http://calculatorservice" >
  
  < types >
  < xsd: Schema container = "http://www.w3.org/2001/XMLSchema".
  xmlns:TNS = "http://calculatorservice".
  targetNamespace = "http://calculatorservice."
  elementFormDefault = "qualified" >
  < xsd: complexType name = 'AddInput' >
  < xsd: SEQUENCE >
  < xsd: element name = "arg0" type = "xsd: int" / >
  < xsd: element name = "arg1" type = "xsd: int" / >
  < / xsd: SEQUENCE >
  < / xsd: complexType >
  < xsd: complexType name = "AddOutput" >
  < xsd: SEQUENCE >
  < xsd: element name = "result" type = "xsd: int" / >
  < / xsd: SEQUENCE >
  < / xsd: complexType >
  < xsd: complexType name = "SubInput" >
  < xsd: SEQUENCE >
  < xsd: element name = "arg0" type = "xsd: int" / >
  < xsd: element name = "arg1" type = "xsd: int" / >
  < / xsd: SEQUENCE >
  < / xsd: complexType >
  < xsd: complexType name = "SubOutput" >
  < xsd: SEQUENCE >
  < xsd: element name = "result" type = "xsd: int" / >
  < / xsd: SEQUENCE >
  < / xsd: complexType >
  < xsd: element name = "doAddRequest" type = "tns:AddInput" / >
  < xsd: element name = "doAddResponse" type = "tns:AddOutput" / >
  < xsd: element name = "doSubRequest" type = "tns:SubInput" / >
  < xsd: element name = "doSubResponse" type = "tns:SubOutput" / >
  < / xsd: Schema >
  < / types >
  
  < name of message = "doAddInput" >
  < name of part = "parameters" element = "tns:doAddRequest" / >
  < / message >
  < name of message = "doAddOutput" >
  < name of part = "parameters" element = "tns:doAddResponse" / >
  < / message >
  < name of message = "doSubInput" >
  < name of part = "parameters" element = "tns:doSubRequest" / >
  < / message >
  < name of message = "doSubOutput" >
  < name of part = "parameters" element = "tns:doSubResponse" / >
  < / message >
  
  < portType name = "Calculator" >
  < operation name = "doAdd" >
  < input message = "tns:doAddInput" / >
  < output message = "tns:doAddOutput" / >
  < / operation >
  < operation name = "doSub" >
  < input message = "tns:doSubInput" / >
  < output message = "tns:doSubOutput" / >
  < / operation >
  < / portType >
  
  < connection name = "CalculatorBinding" type = "tns:Calculator" >
  < style: binding soap = transport "document" = "http://schemas.xmlsoap.org/http" / >
  < operation name = "doAdd" >
  < style soap: operation = 'document' / >
  < input >
  < use of soap: body = "literal" / >
  < / Entry >
  < output >
  < use of soap: body = "literal" / >
  < / output >
  < / operation >
  < operation name = "doSub" >
  < style soap: operation = 'document' / >
  < input >
  < use of soap: body = "literal" / >
  < / Entry >
  < output >
  < use of soap: body = "literal" / >
  < / output >
  < / operation >
  < / binding >
  
  < service name = "CalculatorSerivce" >
  < name of port = "CalculatorPort" binding = "tns:CalculatorBinding" >
  < soap: address location = "http://localhost:7001 / calculator-CalculatorService-context-root/CalculatorPort" / >
  < / port >
  < / service >
  
  < / definitions >
  
  Now, here's the SOAP messages generated by the console of the OSB:
  
  SOAP request:
  
  < soapenv:Envelope = "http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv >
  < xmlns:soap soap: Header = "http://schemas.xmlsoap.org/soap/envelope/" >
  < / soap: Header >
  < soapenv:Body >
  < cal:doAdd xmlns:cal = "http://calculatorservice" >
  < cal:arg0 > 3 < / cal:arg0 >
  < cal:arg1 > 3 < / cal:arg1 >
  < / cal:doAdd >
  < / soapenv:Body >
  < / soapenv:Envelope >
  
  SOAP response:
  
  < xmlns:S s: Envelope = 'http://schemas.xmlsoap.org/soap/envelope/' >
  < Body >
  < S:Fault xmlns:ns4 = 'http://www.w3.org/2003/05/soap-envelope' >
  < faultcode > S:Client < / faultcode >
  < faultstring >
  Cannot find the method dispatch for {http://calculatorservice} doAdd
  < / faultstring >
  < / S:Fault >
  < / Body >
  < / s: Envelope >
  
  
  I would be really grateful if someone could point out my mistakes.
  Thank you
  
  Published by: Abdel Paul Sinha on February 4, 2011 19:35

  Are the only differences between what you and I did: -.
  1. I have used message format "document / literal".
  2. I used the wsdl by downloading the server help: http://:/? WSDL.
  3 created xsd by downloading one from a schema imported in wsdl
  4. in OSB, I created the XML schema to xml schema I created in step 3.
  5. in OSB, I created wsdl and edited the reference of the schema imported to point to the xml schema that is created in step 4.
  6. has created the service company and tested ran perfectly and it.

• The schemas are required to export an APEX application and the EE DDL to itself and XE

  Source DB - Oracle 11 g 2 EA

  Target DB - Oracle 11 GR 2, 11 2 Oracle XE GR SE

  O/S - RHEL 6.5

  Application - APEX 4.2.2

  Must give up an APEX application and the underlying DDL associated with a database Oracle EE an Oracle SE and XE database.

  Patterns are required to export to accomplish this approach?

  Is there one method other than export patterns which would be preferably?  (for example export tablespaces).

  You should not deal with apex tablespace or schema APEX_040X00.

  Just follow these steps:

  (1) ensure that the APEX version is the same or higher in the target schema, upgrade if need be

  (2) discover patterns of the application (NOT APEX_XX) pump and export data those and import them into the target schema.

  (3) in the target database, create a different workspace and the link with the schemas imported analysis

  (4) export enforcement APEX of source database in the target database.

  If you expand the app, better to talk to the one who did it. Make sure that the Images, CSS, JavaScript files are added as objects of support and those that are then exported (to step 4).

  Basically don't worry about APEX_O40X00 scheme, as long as your Apex versions match, it will be the same and will be automatically filled with metadata in the application import and export performance.

• error in the Deniz/Begin/End block

  Hi all
  I wrote a query to show all functions and procedures, including their names, the parameter, the parameter type and return type
  I should say that using the structure delcare, start, end is mandatory for me here.

  DECLARE
  
  BEGIN
  
  SELECT uo.object_name,ua.ARGUMENT_NAME,ua.DATA_TYPE FROM user_arguments ua
  join user_objects uo
  on ua.object_id=uo.object_id
  WHERE uo.OBJECT_TYPE IN ('FUNCTION','PROCEDURE');
  
  
  END;

  but I get this error

  Error starting at line 3 in command:
  DECLARE
  
  BEGIN
  SELECT uo.object_name,ua.ARGUMENT_NAME,ua.DATA_TYPE FROM user_arguments ua
  join user_objects uo
  on ua.object_id=uo.object_id
  WHERE uo.OBJECT_TYPE IN ('FUNCTION','PROCEDURE');
  
  
  END;
  Error report:
  ORA-06550: line 4, column 1:
  PLS-00428: an INTO clause is expected in this SELECT statement
  06550. 00000 -  "line %s, column %s:\n%s"
  *Cause:    Usually a PL/SQL compilation error.
  *Action:

  I know that it may be required to have 'in' in select when we use delcare/start/end.
  
  So would you please you rewrite the query?
  
  
  IM using oracle 11.2.0.2
  
  
  Thank you in advance.
  
  
  best, david

  1003209 wrote:
  Hi all
  I wrote a query to show all functions and procedures, including their names, the parameter, the parameter type and return type
  I should say that using the structure delcare, start, end is mandatory for me here.

  DECLARE
  
  BEGIN
  
  SELECT uo.object_name,ua.ARGUMENT_NAME,ua.DATA_TYPE FROM user_arguments ua
  join user_objects uo
  on ua.object_id=uo.object_id
  WHERE uo.OBJECT_TYPE IN ('FUNCTION','PROCEDURE');
  
  END;
  

  but I get this error

  Error starting at line 3 in command:
  DECLARE
  
  BEGIN
  SELECT uo.object_name,ua.ARGUMENT_NAME,ua.DATA_TYPE FROM user_arguments ua
  join user_objects uo
  on ua.object_id=uo.object_id
  WHERE uo.OBJECT_TYPE IN ('FUNCTION','PROCEDURE');
  
  END;
  Error report:
  ORA-06550: line 4, column 1:
  PLS-00428: an INTO clause is expected in this SELECT statement
  06550. 00000 -  "line %s, column %s:\n%s"
  *Cause:    Usually a PL/SQL compilation error.
  *Action:
  

  I know that it may be required to have 'in' in select when we use delcare/start/end.

  So would you please you rewrite the query?

  IM using oracle 11.2.0.2

  Thank you in advance.

  best, david

  Hi David,

  The query will throw the error if the schema where you run out of '1' function or procedure in the system.
  It is not clear in your condition.
  Assuming that you want to display the output

  SQL> set serveroutput on
  SQL> DECLARE
    2  CURSOR cur_obj IS
    3  SELECT uo.object_name,ua.ARGUMENT_NAME,ua.DATA_TYPE
    4  FROM user_arguments ua
    5   join user_objects uo
    6  on ua.object_id=uo.object_id
    7  WHERE uo.OBJECT_TYPE IN ('FUNCTION','PROCEDURE');
    8  BEGIN
    9  FOR rec_obj IN cur_obj LOOP
   10  dbms_output.put_line('OBJECT_NAME:'||rec_obj.object_name||' '||'ARGUMENT_NAME:'||' '||rec_obj.a
  rgument_name||' '||'OBJECT_TYPE:'||rec_obj.data_type);
   11  END LOOP;
   12  END;
   13
   14
   15  .
  SQL> /
  OBJECT_NAME:GETUSERORDERCOUNT ARGUMENT_NAME:  OBJECT_TYPE:NUMBER
  OBJECT_NAME:GETUSERORDERCOUNT ARGUMENT_NAME: REGKEY OBJECT_TYPE:NUMBER
  OBJECT_NAME:GETUSERORDERCOUNT ARGUMENT_NAME: PARTNERKEY OBJECT_TYPE:NUMBER
  OBJECT_NAME:GSK_ACCOUNT_FIRSTADDRESS ARGUMENT_NAME:  OBJECT_TYPE:NUMBER
  OBJECT_NAME:GSK_ACCOUNT_FIRSTADDRESS ARGUMENT_NAME: ACCOUNT_KEY
  OBJECT_TYPE:NUMBER
  OBJECT_NAME:SUMCONCAT ARGUMENT_NAME:  OBJECT_TYPE:VARCHAR2
  OBJECT_NAME:SUMCONCAT ARGUMENT_NAME: INPUT OBJECT_TYPE:VARCHAR2
  OBJECT_NAME:GSK_PB_SHOW ARGUMENT_NAME:  OBJECT_TYPE:NUMBER
  ...........
  

  Kind regards
  Claudy K

• You do not have access to the schema that you import

  Hello

  I have been using Apex for a while with no problems but just today, I tried to create a form based on a table and got this error. - , you do not have access to the schema that you import.  Import impossible.

  The table in question belongs to a different schema, but the Apex, the analysis of schema has access too it. (And I've created forms on this Board in the past)

  Someone point me in the right direction?

  Version 4.2.2.00.11 on 2008R2.

  Thank you

  My first thought is the 4.2.2

  I did some tests in the past, and some of the assistants have been bug fixes related to permissions issues like you describe.  If the same operation may work as expected in 4.2.3.

  Saying - 'don't do a upgrade..' can sometimes be of any help...

  Have you tried to create a view of the table using the complete Wizard?

  My suggestion:

  -Create a view with the same structure as the table

  -Run the wizard so all elements on the page are created

  -Adjust the source for DML processes on the page for the synonym table or owner.table you're trying to do.

  -Delete the view that it is no longer necessary.

  It is just a workaround, but could help you.

  -Tim St.

• ORA-04031 then that he was trying to import the schema to XE

  Hello. I have Linux Amazon 'micro instance' EC2 (Yes, virtual machine) which has 613 MB of memory. I installed Oracle XE 11.2.0.2 and now try to import the schema of 11.2 oracle server standard edition:
  Impdp system/pwd dumpfile = mydump schema myschema =
  
  But I got the following error:
  ...
  Object type SCHEMA_EXPORT/TABLE/TABLE processing
  Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
  UDI-04031: operation has generated ORACLE 4031 error
  ORA-04031: unable to allocate 32 bytes of memory ('pool', ' SELECT job_id FROM v$ datapum... ") (', 'SQLA","tmp") shared
  
  Is - this 613 MB of RAM enough for execution of XE? Here is the output of the memory:
  
  SQL > show sga
  
  Total System Global Area 250523648 bytes
  Bytes of size 2225472 fixed
  239078080 variable size bytes
  4194304 buffers of data bytes
  Redo buffers 5025792 bytes

  613 MB of RAM enough for execution of XE?

  The minimum recommended is 512 MB, so in theory it should be enough.

  Total System Global Area 250523648 bytes

  Which is less than 250 MB. With most of the facilities of Oracle, GR 11, 2, I'd rather have at least 512 MB for the SGA. But we must leave some room for the OS and PGA are an allowance separate memory for the instance as well. Are likely to shrink the PGA and give a little more room to SGA_TARGET or MEMORY_TARGET, depends on what has been tweeked, and which is still in the default settings.

  Take a look at the default value of the boot settings, in your alert log, find the last start, the lines between the "parameters of the system with default values:" and maybe a date stamp then, stick it in you, we could can help with suggestions to try.

• Import the schema from one instance to another

  Hello
  
  I'm going through a pattern of a (production) Oracle instance to another (development) that is located on a different server. I modified this two years ago, and the data are now obsolete. We do export every night of all schemas and I only want to import the schema of "Bob" in dev. I copied the export file to the dev server and used the following command:
  
  Sys IMP / < password > file = server.dmp fromuser = bob ignore = y
  
  The import worked well for a bit, then I started getting errors cannot create scopes on the tablespace and possibly the imp stopped. I check, and of course, like many primary tablespace which is strange since the two prod and the dev team have the same size. In any case, I went in and has doubled the size of the index and the data of the tablespaces and tried to import again.
  
  This time, I got the following:
  
  IMP-00019: line rejected due to the ORACLE 1 error
  IMP-00003: ORACLE error 1
  ORA-00001: unique constraint (SYS. XPKACCOUNT_TRANSACTION) violated
  Column 1 3956
  2 1074785 column
  Column 3 20 - APR - 2001:08:57:44
  Column 4 483
  Column 5 52905
  Column 6 CR
  Column 7-. 72
  Column 8
  Column 9 47650
  Column 10
  Column 11
  Column 12
  IMP-00019: line rejected due to the ORACLE 1 error
  IMP-00003: ORACLE error 1
  ORA-00001: unique constraint (SYS. XPKACCOUNT_TRANSACTION) violated
  Column 1 3957
  2 1076007 column
  Column 3 20 - APR - 2001:13:38:04
  Column 4 483
  Column 5 24290
  Column 6 CR
  Column 7-. 26
  Column 8
  Column 9 47839
  Column 10
  Column 11
  Column 12
  IMP-00019: line rejected due to the ORACLE 1 error
  IMP-00003: ORACLE error 1
  ORA-00001: unique constraint (SYS. XPKACCOUNT_TRANSACTION) violated
  3958 1 column
  2 1076015 column
  Column 3 20 - APR - 2001:13:38:54
  Column 4 483
  Column 5 24290
  Column 6 CR
  Column 7-. 09
  Column 8
  Column 9 47842
  Column 10
  Column 11
  Column 12
  
  I use the "ignore = y ' option it will ignore a problem if the object already exists, but it adds the data to import or clear and then add it? I'm guessing that he tries to add data, which are the cause of the errors.
  
  I remember in the past, the only way I got this job was to open a session as long as sys, delete user Bob w/waterfall, and then re-create the user before importing. This seems to be a royal pain in the lacrosse.
  
  Did I miss something on how to properly import the schema?
  
  Thank you

  This works. If you have changes of geometry in the table, it's probably best to drop the scheme or at least the table. What if all you want to do is update the data and nothing else has changed, then you can simply truncate and then import the data.

  Dean

• Ignore a schema import in the dumpfile

  version: 11.2.0.3
  Platform: RHEL 5.4
  
  Imagine that you have 100 saved patterns (expdp) in a dumpfile, and you want to import a schema of this dumpfile in a DB. You can specify only what a schema required using the SCHEMAS in the impdp. But things are not simple, when you want to use REMAP_SCHEMA.
  
  Here is my scenario:
  ===================
  
  I took the dump expdp patterns A and B only once. Thus dumpfile has objects both A and B.
  Dumpfile name is: schemas_AandB.dmp
  
  Now, I want to create the diagram C a with parameter REMAP_SCHEMA
  
  -Set each parameter in a separate line for readability

  impdp PSTREF/PSTREF_123 
  DIRECTORY=ADET_EFX_DIR 
  DUMPFILE=schemas_AandB.dmp
  LOGFILE=CreatingCfromA-Impdp.log 
  REMAP_SCHEMA=A:C

  Everything's fine. Scheme C is created from A pattern in the dumpfile.
  
  But impdp tries to create the schema B so because the B pattern was present in the dumpfile. Since the B schema and its objects are already in the comic book, I get the following errors.
  

  ORA-31684: Object type USER:"B" already exists
  ORA-31684: Object type PROCEDURE:"B"."SP_CLEAREXPIREDSESSIONDATA" already exists
  ORA-31684: Object type PROCEDURE:"B"."SP_DELETESESSIONDATA" already exists
  ORA-31684: Object type PROCEDURE:"B"."SP_DELETESTATECONTEXTINFO" already exists
  ORA-31684: Object type PROCEDURE:"B"."SP_GETNEWCONTEXT" already exists
  ORA-31684: Object type PROCEDURE:"B"."SP_GETNEWSESSION" already exists
  ORA-31684: Object type PROCEDURE:"B"."SP_GETNEXTPART" already exists
  ORA-31684: Object type PROCEDURE:"B"."SP_GETSESSIONDATA" already exists
  ORA-31684: Object type PROCEDURE:"B"."SP_GETSTATECONTEXTINFO" already exists

  Because I don't want B to import schema, I tried to use the SCHEMAS parameter by simply mentioning A.
  
  -Added setting of PATTERNS

  impdp PSTREF/PSTREF_123 
  DIRECTORY=ADET_EFX_DIR 
  DUMPFILE=SCHEMAS_AandB.dmp
  LOGFILE=CreatingCfromA-Impdp.log 
  REMAP_SCHEMA=A:C
  schemas=A   ---------------------------> Trying to avoid schema B in the dumpfile from being imported by specifying SCHEMAS

  But I got the following error

  ORA-39065: unexpected master process exception in MAIN
  ORA-12801: error signaled in parallel query server PZ99, instance oracth214:HEWRAC1 (1)
  ORA-01460: unimplemented or unreasonable conversion requested

  Parameters REMAP_SCHEMA and PATTERNS may not be working together. Is it possible to prevent the impdp to import user B and its objects?

  YOU HAVE TO USE the OPTION EXCLUDE = PATTERN: 'IN ('B') inside the expdp '.

  EXCLUDE PATTERNS
  http://rkdba.blogspot.in/2011/04/expdp-exclude-multiple-tables-and.html

• Schema import failed: IMP-00008: not recognized training in the export file:

  Hello
  
  I was running an import of a DPM database file database schema.
  
  I met the following error in the generated log file to get:
  
  IMP-00008: unrecognized statement in the export file:
  
  All tables copied except one. Now what I thought must import only one table again after the export of the production schema.
  
  But what functions, triggers, procedures? How I put them all in the schema?
  If reimport the schema still the only option?
  
  
  Thank you
  KK

  have you tried with a new such export suggested before?
  Also, check if the export file has been damaged or truncated due to lack of space in the pipe of destination?

  Published by: orawiss on May 5, 2011 13:17

• Get the error during the creation of the type of the Schema element variable

  Hello world
  
  To create a variable of type of schema, I do the following steps...
  
  Select 'Variables' after right-clicking on the bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type choose, I expanded the my imported schema files. And selected a type of item, and then click ok to create this variable. I get the message...
  TO SAVE ANY WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED IN THE DIRECTORY OF THE CURRENT PROJECT.
  
  Which is to say by whom.
  I imported the schema files in the project. After that I imported in the WSDL file also. Now why I am getting error during the creation of the variable. However, I can create variable directly in. BPEL file, then everything is fine. And it works too. But what is average with the error above? Why I am not able to create the variable via GUI?
  
  Thank you.

  Hello

  I have this same problem this morning, and I was going crazy, until I found this Web page on the internet:

  [http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process | http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]

  The idea is that the jdeveloper is not very good with directories with spaces to work on the directory name. If you move all your work in a directory without spaces, it will work smoothly. At least, it worked for me.

  Kind regards

  Nacho