Schema import failed: IMP-00008: not recognized training in the export file:

Similar Questions

• 3 TB Canvio Stor.E not recognized correctly in the USB 3.0 port

  I have four of the HDWC130EK3J1 external Stor.E Canvio Desktop HDDs.
  If more than one USB 3.0 drive is connected the partitions are not recognized.

  The GPT partitions are displayed as MBR partition protection.
  The MBR partitions are displayed as never applied.

  The drive is detected correctly after that he was to reinsert and close ofd.
  At the same time, only 1-3 partitions are recognized correctly.
  This problem can be reproduced 8.1 running Win and Win 7 64 bit using two different computers, by using the USB Intel and Nec controller.

  Currently, BIOS, update driver update. The HDDs are checked to find errors.
  Is there an update to flash ready or a replacement for the external hard drive option?
  Please note that a replacement with the same model makes no sense.

  My German Embassy has been blocked so I translated it. Sorry the only translator Google

  There could be a simple answer to this problem:
  There are two standards different MBR and GPT partitions.

  MBR works with drives up to 2 TB in size, but it can record handle t with more than 2 TB of space. MBR also only supports up to four primary partitions if you want more, you have to do one of your primary partitions an extended partition and create logical partitions inside.

  GPT (GUID Partition Table) is a new standard which replaced the MBR. The TPG requires UEFI. This standard isn't limited like MBR and readers can be much larger and size limits depends on the system and its file systems. It allows an almost unlimited amount of partitions.

  I guess that the system cannot recognize the partitions (from additional external HDD) due to the limitation of the MBR.

• Why am I suddenly "USB not recognized, one of the devices USB has malfunctioned and Windows does not recognize"

  Hi all. If anyone out there in Cyber Land can solve this problem for me so I've personally you will issue an eight-pack of ice-cold beer (or a bottle of wine for the ladies lol)...

  I'll try not to waffle too guys, so here's...

  Right my PC running Windows XP. I also have itunes installed on my PC (I have an iphone 4). Upward until yesterday my iphone and itunes were working well, (once I plugged my iphone in the itunes USB port recognised that my iphone was plugged and synchronization was fine etc.).

  But now when I plug my iphone to PC to sync with itunes, I get a pop up box on the lower right part of the screen that reads... "USB not recognized one of the USB devices has malfunctioned, and Windows does not recognize."

  After visiting about 5 different sites now "Ways to solve this problem", believe it or not, I still have the problem bloody! :(

  A site proposed shutdown PC and unplug it from the power supply, then plug it back start-up and back... this as did not work!
  The other they say that I should go to Device Manager, uninstall all the USBs then restart... it did not work either.
  Tried a system restore
  Tried to reinstall itunes

  When I check the names USB in Device Manager, there is one who reads unknown device. I am literally pulling what's left of my hair now. I tried to solve this problem for almost 2 days now and still no joy. That's why no matter what input you guys would be very appreciated. I'm no PC Wizard, so please, don't think you're patronizing me if you break down things step by step for me.

  Thank you comrades, cordially, Freddy frustrated. :)

  Another said I should go to Device Manager, uninstall all the USBs and restart.

  Usually, this works... but can be very dangerous, unless you have a PS/2 keyboard.

  I also assume that you have tried all other USB ports on the computer. tried a verified USB device (for example, a flash drive) in the USB usually when you plug in your iPhone. and I tried your iPhone in another computer (I know it's rare for an error message Windows really means what he says, but sometimes the material lacks).

  Is the charge of the iPhone when it is connected to the USB port (I don't think)?  This happened to me recently, but a reboot fixed it.  I guess that that happened to you.

  I guess that you don't see the error messages in Device Manager or you must declare them.

  You can uninstall all USB devices that do not exist as follows:

  • Open a command prompt window (start > run > cmd > OK)
  • Enter the following command and press enter

  Set devmgr_show_nonpresent_devices = 1

  • Start the Device Manager by typing the following in the same command prompt window

  devmgmt.msc

  • In Device Manager, click the view menu and select "Show hidden devices".
  • You should see a category just after "Non-Plug and Play drivers" named "other devices."  Chances are that there will be a big exclamation yellow mark beside it.  When you expand the "other devices" you should see several non identified "USB devices."  Uninstall all this.
  • Reboot (with the iPhone NOT connected).

• Windows 7 and install/recognize the problems of printer HP LaserJet P2015 error - USB Device not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  Title: Windows 7 and install/recognize printer HP LaserJet P2015 teething problems...

  I have a dell inspiron that was originally windows Vista and I changed to windows7.  I have a LaserJet where I work, a HP LaserJet P2015 printer and when I plug in the USB, it says (peripheral USB not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  How and what should I do to get the printer going or to get the computer to recognize.  Installation CD will not work and I looked online and downloaded drivers but still the same thing.

  Hi LOliver,

  Method 1: Run the hardware and peripheral troubleshooting tool and check if it makes a difference.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Disconnect all USB (Universal Serial Bus) devices connected to the computer (unless your mouse and keyboard). Connect the printer and check to see if the problem persists.

  Method 3: Connect the printer to a different USB port and check.

  Method 4: Reinstall the USB (Universal Serial Bus) controllers.

   First of all, please disconnect all USB devices and then perform the following steps:

  (a) click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  (b) in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  (c) repeat step 2 to uninstall all items under 'USB Bus controllers'.

   

  Then, restart your computer and windows will automatically reinstall all USB controllers.

   

  HP printer drivers- ensure that you download the driver appropriate for your device model package.

   

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Import the results of import operations have not been executed."   The following files were not imported because they could not be read

  Use Windows 10 and lightroom cc.

  All of a sudden I can't import pictures from my memory card.

  "Import results.

  Some import operations were not performed.

  The following files were not imported because they could not be read. »

  
  

  Anyone having the same problem
  

  Hi SwedishBirch,

  Make sure that the destination location is set correctly and has full read and write permissions.

  And make sure that the program is updated: keeping up-to-date for Lightroom

  Kind regards

  Claes

• I've updated to LR6.4 today and since then have been unable to import photos.  Always comes the following message is displayed:-certain import operations have not been executed.  The following files were not imported because they could not be read.  I don

  I've updated to LR6.4 today and since then have been unable to import photos.  Always comes the following message is displayed:-certain import operations have not been executed.  The following files were not imported because they could not be read.  I don't change anything, update only.  I rebooted since my Mac Lightroom of uninstalled and reinstalled LR6 but all without success.  Very frustrated!

  Hi lindaw,.

  Looks like that the destination location is not set correctly.

  Make sure the destination in the import window location is set correctly and has full read and write permissions.

  Kind regards

  Claes

• Why the CC lightroom does not recognize my users folder when you try to import?  I can not imaport images in the program.  It has worked well in the past

  Why the CC lightroom does not recognize my users folder when you try to import?  I can not imaport images in the program.  It has worked well in the past

  It is an Apple problem. They obviously fixed with a change to iTunes. Download the update on their part.

  HAL

• Flash is not save changes to the .xml file.

  Hello

  I need to download a new version of my app on iOS, but the .xml file will not hold the new version I am writing on the 'AIR for iOS settings' window on Flash cc 2015. It keeps appearing as:

  <? XML version = "1.0".

  also when I try to download the new .ipa on iTunes Connect with the Application Loader, I get this message:

  "" "ERROR-ITMS-4238:"redundant binary Upload. " «"" "" There is already a binary download with release ' 1.0.0' train ' 1.0.0 ' "at SoftwareAssets/PreReleaseSoftwareAsset»»»

  The problem is not of Application Loader or iTunes Connect as when I open again the .fla and check the window 'AIR for iOS parameters' he continues to display the 1.0 version over and over again. If Flash does not save changes to the .xml file.

  And it happens with all my other apps Android or iOS, old and new versions, all appear as <? XML version is "1.0" on the .xml file.

  Is anyone know how can I solve this problem?

  Thank you.

  Hi Pablopi,

  The version you make reference to is the XML version. What to change is the node called "versionNumber".

  So, try to replace 1.0.0 1.0.1.

• Error message the application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file.

  
  

  The error message happens chronically today.

  It does not matter what I try to install the air file.

  I uninstalled, cleaned the registry and all the usual things.

  And then re-installed-with the same error messages

  
  

  Windows 7. Current update.

  processor 2.8 ghz, 12 G Ram - one machine to cook breakfast and make the beds.

  
  

  
  

  " The application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file. "

  
  

  
  

  This is the last log of installation-

  I am not able to find out how to decipher what it means.

  
  

  Someone would have noticed?
  

  
  

  [2015-02 - 18:10:58:58] Unpackaging/validation complete

  [2015-02 - 18:10:58:58] no app location to "LocalizerLeadsTool" appID and pubID "

  [2015-02 - 18:10:59:01] conversion of unpackaged to a native installation package in C:\Users\admin\AppData\Local\Temp\flaAA62.tmp application

  [2015-02 - 18:10:59:02] create an installation package Native failed: [ErrorEvent type = "error" bubbles = false cancelable = false eventPhase = 2 text = "unhandled exception error: EndUpdateResource: error Windows #5" errorID = 0]

  [2015-02 - 18:10:59:03]

  I got a response on another area of support.

  And

  Because I asked for help here-

  I think it's the kind of thing to do to post the

  steps that allowed me to correct.

  I knew I had the latest Adobe air platform.

  I felt that I knew that the download files were updated.

  So-

  What was one of the suggestions I've had -

  Told to turn off the firewall and antivirus.

  Instinct made me disconnect the machine from the router.

  I continued and disabled all the protections I had put in place-

  and watched as the first program installed air -.

  Since before January.

  Then put those protections back in line.

  And re-attached the router line.

  It doesn't seem to work now.

• When trying to update, I received this message: Firefox 3.6.3 (2).dmg.part could not be saved, because the source file could not be read.

  When trying to download an update, I got all first: "there was any problems searching, download or installation of this update. "Firefox could not be updated because: no data has been received (please try again)" he also gave a link to download manually. When I tried the site in Firefox, I got: 3.6.3 (2).dmg.part /Users/(deleted for privacy)/Desktop/Firefox could not be saved, because the source file could not be read.

  Try again later or contact the server administrator. I tried this 3 times.

  This has happened

  Don't know how many times

  Is around 11:00 central time Mon, 17 May 2010

  This means that the file cannot read because he was interrupted while downloading. Try to download again

• iTunes can't locate my music. When I try to play a song one get an exclamation point and the message "the song could not be used because the original file cannot be found. You want to locate?

  I don't know if I am posting this in the right place. If she must be somewhere else please let me know.

  When I try to play a song I get an exclamation point next to the song and a pop up that says: "the song could not be used because the original file cannot be found. You want to locate? »

  I use Windows 10 and iTunes version 12.3.1.

  It's the path statement where the music is currently located on my hard drive:

  

  If I click on a single song from within File Explorer, it opens iTunes and the song plays without problem.

  To try to solve this problem, I went in 'Advanced' in 'Préférences' and changed the iTunes media folder location to match the location of the files on my disk hard as you can see below.

  

  Unfortunately, it did not work either. iTunes is always gives me the same message that it cannot locate the original files. I REALLY hope someone can help me finally tried for weeks to solve this problem.

  Thank you!

  Now iCloud is down, if something happens on the end of apples.

• 1st problem = Error 1606% APPDATA % and 2nd problem = WARNING Logger: initialize() is not yet known. The log file may experience corruption...

  1st problem = Error 1606% APPDATA % and 2nd problem = WARNING Logger: initialize() is not yet known. The log file may experience corruption...

  Try this FixIt:

  Code error '0 x 80070646', '646', or '1606 ' when you try to install Office updates

  http://support.Microsoft.com/kb/2258121

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• screen saver does not - says he needs the following file: dsdx932.dll where I get it

  screen saver does not - says he needs the following file: dsdx932.dll where I get it

  Try the Direct X Installer Web -.

  Download details: DirectX end-user performance

  If the d3dx9_32.dll file is missing in fact the Web Installer will install a. If it is corrupt you then if you delete the file Sytem32 and SysWOW64 (with 64-bit Windows) Web Installer will install a new copy.
  The Web Installer does not overwrite existing files.
  When you do not get an error of direct x with a specific file name. You must use the
  Direct X Redistrubitable June 2010 as it will overwrite existing files of DX.

  Download details - Microsoft Download Center - DirectX Redist (June 2010)

  .

• "could not be used because the original file cannot be found".

  Due to the use of the program duplicate Fixer of Photos on my Mac, I now have quite a few photos in Lightroom was marked as "could not be used because the original file cannot be found" and a small! mark appears on the thumbnail.

  I would like to know if I choose these photographs (more than 400 in all of my collection of approximately 20,000) by some filter? I did not understand this point, and it would be useful to follow them down (to then define as rejected and then removed from the LR catalog) without having to wade through hundreds of folders, etc.

  Suggestions for a filter would be very appreciated.

  Tony

  PS I probably shouldn't have trashed the peaks of duplicate Fixer Photos, but this is now water under the brifge...

  Use the menu command library-> find all the Photos of missing

  To fix the icon exclamation point, read the following instructions: Adobe Lightroom - find folders and files moved or missing

• I have Adobe Creative Suite 5.5 Design Standard and I can't open Adobe Photoshop. A window pops up that says "could not initialize Photoshop because the preferences file was invalid (it was deleted)." All my other programs, such as Illustrator, are a

  I have Adobe Creative Suite 5.5 Design Standard and I can't open Adobe Photoshop. A window pops up that says "could not initialize Photoshop because the preferences file was invalid (it was deleted)." All my other programs, such as Illustrator, are able to open. Any help is appreciated. Thank you.

  Hello

  Maybe if you check Photoshop on the cover page of the victory 8 and choose Run as administrator from the options bar at the bottom of the page and then do the Ctrl Alt Shift.

  Kind regards

  Sheena