The VAIO VGNSR599GKB external monitor resolution

Similar Questions

• The external monitor resolution not supported on Satellite Pro U400

  I want to connect an external monitor running at 1440 x 900, but the built-in driver does not offer this resolution and the display is very blurry.
  I think that the Intel driver this will lead, but the computer complains that it is not verified for use and will not be installed.

  Anyone had any joy getting this working?
  Charles

  Unfortunately, this is because of the limitation of the driver.
  What should do? What you can do is to install a non-Toshiba graphics card driver but also, this isn't the best idea.

  Third party graphic driver can have a negative influence on the features of the graphics card and allow him to work without limitation. It may end with overheating or material damage.
  So think twice before doing this.

• Tecra A7 with port replicator - the bad external monitor resolution

  Hello

  I have a Tecra A7 (Mod.No. PTA71E) that I use with often an III advanced port replicator and an external 19 "monitor (1280 x 1024).

  Now Ichanged the monitor with a new LCD display 22 '' Samsung 223BW with a resolution of 1680 x 1050.

  Attached to the VGA, I have a lot of flicker problems drinking the reolution is OK.
  Attached to the DVI I have not flickering but the monitor get a resolution of 1280 x 1024 with a desktop computer to 1680 x 1050, that appear depending on the position of the mouse.

  How can I use the DVI and get good resolution (as in VGA mode) but without twinkle?

  Thank you
  Davide Rubbiani

  Hello

  I guess that the Toshiba ATI driver does not support the resolution of 1680 x 1050.
  The only way to get the 1680 x 1050 resolution is to install another driver.

  Maybe here you will find a working one.
  http://drivers.Softpedia.com/get/graphics-board/ATI
  CU

• Need to reset the external monitor resolution in Windows Vista

  Stupidly, I changed the resolution of my new external monitor on my laptop to a not available (single mode external monitor) and received a message on the screen: "out of range" + white screen. No matter how hard I tried, I can't use one external monitor mode and must live with double display (which is a waste of energy on my tiny laptop screen). Could someone tell me please how to reset the resolution setting in Vista for the external monitor?

  Hello

  Welcome to the Microsoft Vista answers Forum!

  You can try the steps below and check if the problem is resolved.

  You can go to the control panel of the screen and reset it to factory settings.

  And if you face the same problems, then, you must contact your system provider who will be in a better position to help you reset the external screen to its default state.

  As a workaround, so check you have function keys on your portable computer, which can go from a monitor to your laptop and external monitor.

  If Yes, then try to return to the screen of the laptop and turn off the external monitor.

  Hope this information is useful.

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Equium A110-252: the display on the external monitor resolution

  When I connect my LCD TV screen to my new satellite A110-252 using the external monitor port does not fit the image of the (too big) TV screen.

  I've tried everything on orders for establishment of TV screen but no joy. Surely, there must be an option to fit to the screen on satellite? Can anyone help?

  Thank you Perry.

  Hi there, you are using the external monitor port or the S-Video? Unfortunately, if you use the S-video port you can hold all of Office on television because it is technically impossible (without deleting the lines).

  TV less than number of rows than a computer monitor: PAL = 576 visible lines, NTSC = 480 visible lines except if you can pass in 640 x 480 mode 800 x 600 is the best that you can use to display an image on the TV.

  Richard S.

• Satellite A100: Can't choose my preferred on external monitor resolution

  Hello

  When I connect to my external monitor (Bravia) so I'm not able to select alle-screen resolutions this monitor supports (1378 x 1024 or something like that). How can I solve this (laptop Satellite A100 with Vista). And if it is a driver problem... where can I get the right drivers?

  Leon

  It certainly has to do with the graphics driver.
  The graphics driver does not include the resolution you want to choose and so you cannot select it!

  Ask you a good pilot? You already use the correct driver. No one can do so that this other driver would include your favorite resolution.

  I read that many new generation external monitors are supplied with the software (driver) CD. You may need to install the software that came with your monitor.

  However, depending on your graphics card! You can try to install the drivers of the 3rd site part
  -www.Intel.com
  -www.omegadrivers.net
  -www.laptopvideo2go.com

  Good bye

• ThinkPad tablet 10 maximum external monitor resolution

  Hello

  The max resolution that I receive on the external monitor or by using the docking station or micro HDMI port is 1920 x 1080. The touch screen's native resolution is 1920 X 1200.

  1. is it possible to get alo less 1920 X 1200 on the external monitor?

  2. in the case, which could be the technical reason if the video card compatible with still more than 1920 X 1200 theoretically.

  Thank you.

  The answer certainly lies with Intel, not Lenovo. It's an Intel chipset and GPU, and pilots come from Intel...

• Is satellite L350-170 - possible to use the laptop as external monitor

  Ok... So I broke the other day to the top of my screen on my laptop, and was amazing, if it is possible to use another laptop as an external monitor.

  while I put my files on an external hard drive

  or isit only possible connection to the pc?

  Hello

  It would be possible to use the second laptop as an external display ONLY if the computer a laptop would support the video port line-in to the receipt of the video signal.

  But the most common books supports the only video out s-Video port or a vga port, and in this case, you will not be able to use the laptop as a second monitor external.

  For example, the Satellite L350-170 supports only the RGB port that allow you to connect this laptop to external monitor but you can not use this laptop as compensation for external monitor.

  See you soon

• Set the rotation of the screen to external monitor on Portege M400

  I would like to be able to use the screen of the mobile phone in the form of tablets, while the display to an external monitor. The problem is that when you use the laptop in its Tablet configuration (fixed and swivel screen on top) the external monitor displays the image upside down. If I rotate the screen image output, so I use the Tablet upside which is impossible when it is docked. Is it all the same independently set the rotation of the screen of the Tablet and the external screen?
  If someone could help me with this I would be grateful as at this moment whether or not I have to remove the Tablet and use backwards the external monitor.

  I use Windows tablet PC on a Portege M400 and a monitor external 22 "LCD

  Thank you.

  Before we start the discussion I just have one question: do you want to use extended desktop or office cloned on external monitor?

• Multiple monitors in the problem. External monitor display full desktop but no video in windows media player.

  I plugged a LCD TV to my laptop using a VGA cable. LCD TV display the full desktop.

  When I play a video in Windows Media Player video area is not displayed on the LCD screen, the rest all is shown.

  When I ran the player VLC video did not show, but when I changed the video option "overlay video output" i.e disabled this option, the video was shown on the LCD.

  But there is no option in WMP. How in WMP?

  What is the problem?

  Maryse Agarwal

  not a driver problem

  found the solution, I used both the computer laptop lcd and the external monitor

  When I went just outside, he played

  This is because the graphics card offers support for playback of the video when you play the video on the internal monitor

  Maryse Agarwal

• HDMI is not send the signal on external monitor once the laptop awakens from his sleep

  I have my TV as a second monitor for my laptop. I connected via HDMI. Once I leave my laptop a little past in mode 'sleep' and the screen loses the connection. Once I wake up the laptop, the monitor is not turning back on my desktop. It remains off. I disconnect and reconnect the HDMI and it does nothing. During this operation, my laptop screen flickers as when he connects to it, but nothing happens. My TV does not receive the signal, but the laptop says it's connected. What can I do to fix this? Thank you

  PS. I have to restart my laptop each time to allow to work my external monitor.

  Right-click anywhere in your option chart click homepage > output > and choose computer laptop + moniter

• Tecra A3: cannot use the 1920 x 1200 on external monitor resolution

  Hello

  I have use for a Toshiba Tecra A3 Notebook with build in Intel GMA900 video card. Connected to the Dell 2407WFP (with the current drivers installed video card and monitor) I could only choose 1600 * 1200 settings. The screen on the screen with the right max resolution of 1920 * 1200 - intel but I could only choose 4:3 rations in display properties.

  The laptop should be able to run the resolution of 1920 * 1200 with no problems, but I can't choose this settings.

  An idea or a tool that could help me...

  Thank you

  P.S.: with the same connection Tecra A7 works very well @1920 * 1200

  I don t know why, but some drivers graphics don t allow to use all the screen resolutions.
  Unfortunately, it doesn't have much to do. If the resolution 1900 x 1200 is not in the list of available resolutions, so you will not be able to use it.

  Maybe another graphic driver would allow you to use this special resolution but I m not 100% sure about this.
  In addition, you should always use drivers Toshiba graphics and if you want to install other graphics drivers IE. Omega drivers so you can do so at you own risk!

• Re: Satellite A100-283 - 16:9 display on external monitor resolution

  Hello

  I just got an old Toshiba Satellite A100-283 and tried to connect it to a TFT 22 ". Somehow, it seems that this laptop graphics card does not support the external screen such as 1920 x 1080 resolutions. I find 16:9 1920 x 1440 resolutions and such but not at all.
  Is - anyone here know if there is a way to get this notebook running on an external display in 16:9?

  Thank you in advance for your help!

  Heike

  Hey Buddy,

  You can change the screen resolution to the 16:9 format when you remove the brand to hide modes that this monitor cannot display as [THIS | http://blog.wildvista.com/wp-content/uploads/2009/12/Lightroom_hide_modes-340x400.png] photo?

  Check it then [screen resolutions | http://blog.wildvista.com/wp-content/uploads/2009/12/Lightroom_vertical_res-355x400.png] again if you select another resolution of the screen

• T520 problems with external monitor resolution

  Hello

  I'm standing right now waiting on hold for a Lenovo tech support rep, so I thought I'd just post my problem here. I just bought a Dell ultrasharp monitor U2713HM and am trying to connect it to my Lenovo T520. We sometimes see the monitor and sometimes it isn't, but this isn't my main problem. The monitor is supposed to be 2560 x 1440, but all the resolution settings are grayed out. I know that the Lenovo can support it because my last screen is a Samsung SyncMaster supporting 2560 x 1440, and it was beautiful (beautiful until the monitor exploded).

  I was on the phone with Dell and Lenovo, and so far nobody has been able to solve the problem. I've updated the graphics driver NVIDIA (NVS4200M) to the latest version (310.90) as suggested by Dell, and I changed the cable VGA to DVI - D cable (connected to the Dual Link adapter), as suggested by Lenovo. He stlil does not work.

  I could use some suggestions. I'm not grumpy at all, so it's quite frustrating. Thank you!!

  
  

• When I plug the second monitor, both screens go black - I can not change the settings for external monitor

  Help, please!

  Hello

  I suggest you to return the item and check if it helps.

   

  Solving the multiple monitor problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-multiple-monitor-problems

  You can also try lowering the resolution of the screen and check if it works.

  Change the screen resolution

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  I hope this helps.