Error "incompatible binary translation with long play mode...". »

Similar Questions

• WMP 11 error c0011b1 - .wmv files no longer play

  I am running XP SP3, which has recently updated to WMP 11.  Can play is no longer the .wmv videos. The error message sent me to a web page with the error C00D11B1 and suggests that the audio drivers are up to date.  No update is available for this computer and other audio programs as iTunes works fine.

  All of the 'solutions' I found do not change anything.  I tried "backward" WMP 10 and who fails.  I also tried to install a free video player, who also will not play video files.  Any ideas?

  Hi Rob,

  Visit this link I solved the same problem in following it.

  http://www.ehow.com/how_5092597_solve-C00D1199-error.html

• Binary translation is incompatible with the long mode on this platform. Windows 7, processor intel core i5

  I install VMware Workstation 12.1.1 Player for Windows 64-bit operating systems on Lenovo intel core i5 Windows 7.

  I have a copy of VM for HP Quality Center with the VirXPSP3.vmx file and the environment.

  When I try to open the Workstation Player vmx file:

  (1) I got prompt that machine virtual seem to be an option to take possession and use

  2) after taking possession, I try to play the virtual machine, I got a prompt with "binary translation is incompatible with the long mode on this platform. Long mod will be disabled in the virtual environment and application requiring long mode does not work correctly as well. See http://vmware.com/info?id=152 for more details. »

  Link is on this page: system required to install an operating system 64-bit on a 32-bit host (1003945) client. VMware KB

  Host is definitely 64 so I'm puzzled with this is the case.

  (3) next step/guest is: "this virtual machine may have been moved or copied. I clicked on the button "I copied it".

  (4) the following message:

  Fatal error VMware Player: (mks)

  Exception 0xc0000005 (access violation) occurred.

  Log file is attached.

  Line 476 in the log file is:

  The following features of VT - x are necessary for the support of VT - x in VMware Player; However, these features are not available on this server:

  2016 06-07 T 13: 51:34.466 - 07:00 | VMX | I125: hostCpuFeatures = 0x217d

  In one of the previous installation, I did virtual Intel technology enabled in the BIOS after one of the responses of your forum. It has not removed the error.

  Just to clarify whenever I have uninstall I'm your site troubleshooting steps:

  (1) Uninstall using Add/Remove program of the program and features

  (2) run the installer with clean / change

  I do above steps as an administrator and restart after each step.

  On top I have delete the following folders:

  C:\Program Files (x 86) folder \Common Files\VMware

  File C:\ProgramData\VMware

  File C:\Users\Ivana\AppData\Local\VMware

  Files C:\Users\Ivana\AppData\Local\CrashDumps\vmware-vmx.exe.*.dmp

  File C:\Users\Ivana\AppData\Local\Temp\vmware-Ivana

  File C:\Users\Ivana\AppData\Roaming\VMware

  And delete the folder with the Virtual Machine for HP Quality Center.

  Do you know how can I fix a fatal error (mks)?

  The same installation works fine on HP with Windows 7, i.e. copy of VM for HP Quality Center is ok.

  Thanks in advance for your help.

  Usually, this is caused by outdated or incompatible graphics drivers on your host.  I expect that the latest drivers for your integrated Intel HD Graphics 4000 would be probably already delivered through Windows Update, however.  Could be interesting to see if there is an optional update in your Windows Update list to get a new graphics driver.

  Otherwise, you can try the problem by disabling 3D graphic acceleration: from the VM menu, select settings..., and then in the list of material , choose display.  Clear (uncheck) the box 3D graphic acceleration .

  I hope this helps!

  --

  Darius

• VMplayer "Binary translation - long mode" error on the new ZBook 15 G2 w / i7-4810MQ

  I installed VMplayer 5.0.x and attempted to load an image of Machine virtual existing Win7Pro 64 and got: "binary translation is incompatible with the long mode on this platform.  Long mode off. Without the support of the long mode, the virtual machine will not be able to run 64-bit code. "For more information see http://vmware.com/info?id=152 .

  Passed 64-bit compatibility check (referenced in the link): ' this machine is capable of runnning a 64 bit comments under this product VMware operating system. "

  I tried to reinstall the operating system as a new virtual machine and got the same error message.

  VMware docs see firmware/BIOS, does not support the VT CPU features:

  "Intel processors require an EM64T and VT support in the chip and in the BIOS.

  Note: If VT is enabled on an ESX host, the vmx flag is located in/proc/cpuinfo. {LINUX OS}

  Intel EM64T processors do not have segmentation support in long mode. If the Intel EM64T CPU is VT-capable, it comes with support for hardware virtualization (Intel Virtualization Technology). This support for hardware virtualization allows VMware circumvent the lack of segmentation, which allows to run 64-bit on taking VT processors operating systems support Intel EM64T.

  Notes:

  • The firmware/BIOS support is required to enable Intel virtualization technology. Some systems (especially laptops) do not have the necessary firmware/BIOS support to enable Intel virtualization technology and cannot run 64-bit operating systems. »

  The ZBook 15 G2 w / i7-4810MQ CPU supports 64-bit virtualization? Ideas or experience?

  I feel a little embarrassed... I had been in the BIOS Setup but have not seen the VM options under "Advanced". I turned on the features I needed.

• Comments from 64-bit running with binary translation - VT not?

  I was under the impression that with Intel processors, it was not possible to run the operating system client 64-bit without VT hardware support.

  First of all, is that correct?

  If so, when watching an ESX 4.1 run a virtual machine with Windows 2008 R2 (64-bit) from what I can tell of the log files it does work without VT and instead to use binary translation?

  Is it possible, or read the wrong vmware.log file do?

  10:58:29.136 20 August: vmx | MONITOR MODE: enabled modes: BT32 HV

  10:58:29.136 20 August: vmx | MONITORING MODE: user requested modes: BT32 HV HWMMU

  10:58:29.136 20 August: vmx | MONITORING MODE: guestOS favorite modes: HWMMU BT32 HV

  10:58:29.137 20 August: vmx | MONITORING MODE: filtered the list: BT32 HV

  I think the first post on the line with 'filtered' mode to indicate the mode used. Can anyone confirm this?

  The processor is Intel XEON 5110 and in accordance with article (http://communities.vmware.com/docs/DOC-9882) it is not possible to execute 64-guests without VT and all favorite modes use VT and memory virtualization software (TPS, since the absence of EFA in the older CPU).

  I have not changed the options CPU/MMU virtualization on the virtual machine, is by default.

  So is this normal or just me be confused?

  ricnob wrote:

  In the document "software and hardware Techniques for x 86 Virtualization" (http://www.vmware.com/files/pdf/software_hardware_tech_x86_virt.pdf), page 8, I found that the term BT32 is used on Intel hosts to show the difference of BT64, which won't be possible on Intel. I have no AMD to test, but the vmware.log will show just "BT" or "BT32/64"?

  AMD systems will be just "BT".

  If it's a 64-bit operating system then the passage to the long mode would probably be early enough in the boot reasonably? As with 32-bit processors started in real mode 16-bit and then move to 32-bit mode very protected early perhaps. Why the hypervisor running in mode binary translation for a few seconds? (When we know that it is a 64-bit operating system in the virtual machine)?

  I remember well, this decision was made so that customers 32 bits would be run in the preferred mode, even if the guest OS type was incorrectly specified as a 64-bit guest OS type.

  I found this online now and the "dynamic" means that it could change between software and hardware virtualization CPU if necessary?

  "Dynamic" may seem more powerful as it is.  The passage of the BT to the HV mode mode is done only once (when entering long mode), and we never switch back.  (Well, go back us to BT for some things, like the real-address mode, but it's still true mode HV.)

  1 does 64 bit VMs always start in dynamic mode is my XEON being older with slower VT?

  This is because your Xeon has long entrance-VM/VM / output latency.  HV is the beginning of default with Penryn (CPU 23 model).

  2. can I tell in the log file that the change of BT32 to VT has actually made? In other words, I thought earlier I could identify the virtualization mode through the lines of MONITOR in vmware.log, but now I know not at all!

  Search the journal "HV." active file

• Install RDCman 2.2 the use Remote Desktop on windows server 2003 fails with the error: incompatible version of c:\windows\system32\mstscax.dll

  2.2 RDCman install remote desktop on windows 2003 server util fails with the error: incompatible version of c:\windows\system32\mstscax.dll

  CAN ANYONE HELP?

  Hi Mordi26:

  This could be because windows server 2003 is not updated with the latest version of the Terminal Server client. With terminal services client 6.0 update... It should solve the problem. Here is the link to download:

  http://www.Microsoft.com/downloads/en/confirmation.aspx?familyId=cc148041-577f-4201-B62C-d71adc98adb1&displaylang=en

• The Windows media player 12 now playing mode. AutoHide controls no longer works. I toggle the AutoHide option and it has no effect.

  Tab Player Windows Media Player 12 options, there is a toggle called Allow hide automatically playback controls. Looks like he could have run the first two days I was with her, but no more. Is it possible to get it working again. It applies to the playing mode.

  Thank you, Orson-

  Hello

  Please use the Forums of Microsoft Windows 7.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  1. open Windows media player.

  2. in the "Library" view, click on the button "Organize", select 'Options '.

  3. the many tabs 'Options' dialog box is displayed. Click on the tab 'Player'

  4. under "Player settings", check 'Allow auto hide of playback controls' as you wish.

  5. click 'OK' to save your settings.

  Method 2:

  Uninstalling and reinstalling Windows Media Player:

  1. click on start and in the search type "Turn Windows has or not.

  2. click on "Turn Windows features on or off".

  3. search for multimedia and uncheck the brand in the face of Windows Media Player.

  4 restart the computer

  5. click on start and in the search type "Turn Windows has or not.

  6. click on "Turn Windows features on or off".

  7. go to Media features and place a check mark in front of the Windows Media Player.

  8 restart the computer.

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Binary read with one of the many possible definitions - or - how ot loop over different groups?

  Hi all

  I have a group of different data types that I save as a binary file and read it again at a later date with an another VI. I saved the definiton of cluster with a typedef, so I am sure that I use the same type of reading and writing.

  Now, I needed to change the cluster in the writing program should include another value. However, I still want to be able to use the VI of reading to read the old and new data files. I also have the opportunity to change the definition of binary file in the future (in VI writing) and be able to quickly adapt the VI to read the new definition while maintaining compatibility with the old.

  My plan was to have a typedef of the pole for each revision, say v1.ctl, v2.ctl, v3.ctl...

  Suppose I have a binary input file that has been saved using one of these typedefs but I don't know which. I now open the file and try to read its binary contents with each of my typedefs for data type and to stop once the reading of the binary VI gives no error. Then I would translate this cluster to the definition of cluster current version by wiring through existing values and assigning values of model / default for variables that are not on the binary file.

  My idea on how this could work is described here, with three versions of filetype:

  

  For each new version of filetype I would need a new business structure although the content of the business structures is almost identical.

  Because I save the file type definition version in my files, I could even simplify and use a separate case structure to update the data and fill in the dummy data:

  

  Now the error structures are completely identical, only their inputs differ by type. How can I work around this? How can I loop over the typedefs from different cluster effectively?

  I use LabView 2012 SP1.

  Since you already have a version of the cluster, just read this byte digital itself and then use a case structure date back to before the version and read the entire cluster based on whatever the version of the type definition read you.

• Error: Java binary has stopped working

  Hi, I'm running Windows 7 32 bit, just installed it on a box of Zotac Z a few weeks with 4 GB of RAM. I installed Java yesterday, but any application that requires java does not work. He will always ask an error: Java binary has stopped working. The types of errors were BEX until I added exceptions settings memory for Java.exe. This is the type of error APPCRASH. The error is always stackhash (hashstack?). I have tried to reinstall java several times and also clean restart. Help, please!

  Hi, Will,

  Follow the suggestions below for a possible solution:

  Method 1: You can check that Windows DEP (Data Execution Prevention) is not blocking it. You can see the article that explains how to do. However, do not choose the option mentioned in this article (#4). Instead, make sure you have selected the radio button:

  Turn on DEP for all programs and Windows services only

   

  Change Data Execution Prevention settings

  http://Windows.Microsoft.com/en-us/Windows7/change-data-execution-prevention-settings

  Method 2: You can place the computer in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Method 3: Run the resolution of the problems of compatibility for Java applications

  What is program compatibility?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

   

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

   

  Let us know if that helps.

• Why iTunes Windows 8 is no longer play HD movies

  After the most recent update of iTunes at 12.3.1.23, iTunes on my desktop Windows 8, it will play no longer HD movies. All I get is a black screen. He n [' t gel - I can easily go out and play the Extras for a film, but not the film itself.] I have close to 30 movies HD in my collection, all purchased on the iTunes store.  I have the latest version of the driver software and video, and all these movies have played without problem in the previous version of iTunes. I can still play SD movies. Does anyone have a solution for this problem?

  Hello BobTheBold,

  Thank you for using communities Support from Apple!

  I understand that you have a problem playing purchased HD movies from iTunes on your Windows computer. To begin the process of troubleshooting, I suggest you read the following two articles. Receive you by chance one alert or error message when you try to play HD movies?

  iTunes for Windows: can't view or read the video content of HD requires HDCP - Support Apple

  On the HD videos in iTunes - Apple Support

  See you soon!

• 0xc000000fb solutions to this error code must be running in safe mode or stop crashing

  very annoying is not good for the soul! any help would be great... must be free however!

  I find it curious that a Google search of your error code come up with zero hits.

  As MS Answers still don't ask for information when a new question is asked, the best response to emerging issues is a wasted messages cycle and time to get additional information.

  Perhaps you should tell us a little about your system:

  What is your system brand and model?
  What is your Version of XP and the Service Pack?
  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..
  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)
  The afflicted system has a CD/DVD drive work?
  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Your system seems to start OK and then crash or didn't he start not at all?

  If your system works fine, what do you think might have changed since the last time it worked correctly?
  Can you make the system crash when you want?  For example, you would say that there is no specific system activity that coincides with the accidents (like watching videos, playing games, etc.).
  If your system uses to work properly, what do you think has changed sine the last time, he did not work properly?

  The next time your system crashes, provide more information on what you see.
  Here's a BSOD example showing information you provide:
  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg
  Send for the nose and the Red arrows (3 to 4 lines total).
  Send all * line STOP message since there are clues in the 4 parameters.
  If there is a name of the file listed in the STOP message, don't forget to include this information too.

• After computer repair, Media & Quicktime no longer play .avi or MP4 files

  I'm working on the computer of a friend who has Windows Vista.  A group of computer repair worked on it a few weeks ago because he had some problems which were found to be network settings only no computer problems.  When they give it, Windows Media Player 11 no longer plays MP4 or AVI files.  He will play .mov files but not others.  They used to play fine.  It will play audio, SOMETIMES and ALWAYS shows them as music files.

  I tried to reset file associations and all that jazz but no luck.  It has notes of music in folder views, when thumbnail view is selected and when he plays in the media, it shows a double music note and plays again SOMETIMES the audio but not video.

  I installed Quicktime for Windows Vista and it will not play them, not even the audio.  Help, please.

  I'm very good for Windows up to XP versions through, but am not familiar with Vista or 7.  I know that I'm working on a large number of computers that are both friends and family, and I should get on the same page, but they have SO MANY problems with these 2 versions that I always worked at least 1 or more.  They have never had so much trouble with XP and have made sure I want a new laptop, but I want without operating system so I can install my own choice.

  In any case, I need to get the AVI files to work while my friend can see his digital films families.

  Thank you

  Hello SugarAvenue,

  It seems to me that video codecs are corrupted with the computer has been repaired. I suggest that you try to download and install the software that helped create digital movies families and install it to check if it installs missing codecs on the system.

  You can check the link that will give you more information about the codecs below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Error 11 d 1 trying to play videos

  original title; Windows Media Player

  using windows media player 11 with vista I get cood11d1 error message when you try to play the movie/video via the net or charges on USB. This is not allways happen but fix it checks don't say no problem and update applications say race latest available. clarification of the error message is cood11d1 certainly not cood11b1. appreciate any thoughts.

  Hello

  Have you made changes on the computer before this problem?

  I suggest you to try the method and check.

  Install the latest version of codecs and check

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions
  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  If the problem persists, check the logs in the event viewer.
  Open event viewer.
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

• Windows Media Player will no longer play videos WVM from my local computer.

  Windows Media Player will no longer play videos WVM from my local computer. It just hangs and the circle keeps going around and around. I "ve waited nine minutes and the video never played WVM. I don't get the error messages.

  Consider this case closed, please.

• Canon PIXMA MP160 error message 'cannot communicate with scanner.

  I have a Canon PIXMA MP160, who worked during the scanning of the printer on my computer. Now, I get an error message "cannot communicate with scanner. Installation scanner no longer works. The Canon site suggested looking in the Windows directory for a file named ' USBSCAN. SYS, but my research has not found it

  Installation scanner said that all the files are in place until it reaches the end.

  I received an update of windows on 31/10/2011. It works